Today's Message Index:
----------------------
1. 06:09 AM - Re: Waldo Pepper DVD (amsafetyc@aol.com)
2. 07:09 AM - Re: Making own graphics (Glenn Thomas)
3. 07:14 AM - Re: Making own graphics (Glenn Thomas)
4. 07:34 AM - Re: Re: Making own graphics (amsafetyc@aol.com)
5. 07:41 AM - Re: Making own graphics (Glenn Thomas)
6. 01:21 PM - manuals for free download (Bill Church)
7. 02:43 PM - Re: manuals for free download (Gene & Tammy)
8. 02:59 PM - Re: manuals for free download (RAMPEYBOY@aol.com)
9. 04:04 PM - 2 Projects for sale (Kirk Huizenga)
10. 05:58 PM - Re: manuals for free download (Rob Stapleton, Jr.)
11. 06:25 PM - Stuck Value (Chet's Mail)
12. 07:25 PM - Re: manuals for free download (amsafetyc@aol.com)
13. 07:57 PM - Hay Field fly-in Winchester IN (shad bell)
14. 08:20 PM - Airport is in trouble!! (shad bell)
15. 10:34 PM - Re: Airport is in trouble!! (Tim Willis)
16. 10:38 PM - Re: Airport is in trouble!! (Ryan Mueller)
Message 1
INDEX | Back to Main INDEX |
NEXT | Skip to NEXT Message |
LIST | Reply to LIST Regarding this Message |
SENDER | Reply to SENDER Regarding this Message |
|
Subject: | Re: Waldo Pepper DVD |
Walt
Mine got damaged I could use a new one. Please advise.
Thanks
John
------Original Message------
From: walt
Sender: owner-pietenpol-list-server@matronics.com
ReplyTo: pietenpol-list@matronics.com
Sent: Mar 13, 2009 6:25 PM
Subject: Re: Pietenpol-List: Waldo Pepper DVD
Douwe,
I have the vid If you'd like it. No charge.
Kind of annoys me, I sent it to someone on this group by snail mail, and
they didn't acknowledge it. Even when I emailed to see if they got it,,,no
response.
People stink.
PS let me know if you want it, and give me a snail mail address.
email me here,,,
wbeevans@verizon.net
walt evans
NX140DL
----- Original Message -----
From: "Douwe Blumberg" <douweblumberg@earthlink.net>
Sent: Friday, March 13, 2009 4:40 PM
Subject: Pietenpol-List: Waldo Pepper DVD
> <douweblumberg@earthlink.net>
>
> Back when Waldo was a daily hot topic, someone said they had some "extras"
> they were going to sell affordably. If that ever came to pass, would the
> gentleman contact me because I still can't seem to find one.
>
> Thanks,
>
> Douwe
>
> finishing cockpits, hooking up instruments, getting ready to paint fuse.
> 90% done, 90% left to go!
>
>
>
Sent from my Verizon Wireless BlackBerry
Message 2
INDEX | Back to Main INDEX |
PREVIOUS | Skip to PREVIOUS Message |
NEXT | Skip to NEXT Message |
LIST | Reply to LIST Regarding this Message |
SENDER | Reply to SENDER Regarding this Message |
|
Subject: | Re: Making own graphics |
Do you know if they make a hand type thing, like a pizza cutter style pounce wheel?
If they do I imagine they would be fairly cheap, you could lay your graphic
out on a table over a big piece of paper and just trace the lines with the
pizza cutter pounce wheel pressing the spikes through your graphic and the paper
underneath. You're right. The sign guys do use chalk. I forgot.
I'm not a sign guy.
--------
Glenn Thomas
N?????
http://www.flyingwood.com
Read this topic online here:
http://forums.matronics.com/viewtopic.php?p=234546#234546
Message 3
INDEX | Back to Main INDEX |
PREVIOUS | Skip to PREVIOUS Message |
NEXT | Skip to NEXT Message |
LIST | Reply to LIST Regarding this Message |
SENDER | Reply to SENDER Regarding this Message |
|
Subject: | Re: Making own graphics |
Nevermind. I Googled it and found one instantly. This kit contains the pizza
cutter pounce wheel, the chalk, and a pounce pad and a description of how it all
works. I imagine I will use this some day so might just buy one of these now
and have it to play with.
Way too far from the end to even think about tormenting myself with logos.
--------
Glenn Thomas
N?????
http://www.flyingwood.com
Read this topic online here:
http://forums.matronics.com/viewtopic.php?p=234547#234547
Message 4
INDEX | Back to Main INDEX |
PREVIOUS | Skip to PREVIOUS Message |
NEXT | Skip to NEXT Message |
LIST | Reply to LIST Regarding this Message |
SENDER | Reply to SENDER Regarding this Message |
|
Subject: | Re: Making own graphics |
I was thinking a bit more high tech actually. More like a power point projector
or transparency to project the image against the Piet. Then its paint by numbers.
The good part is only drawing and the projection size can be adjusted to
taste and or style. No contamination of the work area by chalk or other foreign
matter.
John
------Original Message------
From: Glenn Thomas
Sender: owner-pietenpol-list-server@matronics.com
ReplyTo: pietenpol-list@matronics.com
Sent: Mar 14, 2009 10:13 AM
Subject: Pietenpol-List: Re: Making own graphics
Nevermind. I Googled it and found one instantly. This kit contains the pizza
cutter pounce wheel, the chalk, and a pounce pad and a description of how it all
works. I imagine I will use this some day so might just buy one of these now
and have it to play with.
Way too far from the end to even think about tormenting myself with logos.
--------
Glenn Thomas
N?????
http://www.flyingwood.com
Read this topic online here:
http://forums.matronics.com/viewtopic.php?p=234547#234547
Sent from my Verizon Wireless BlackBerry
Message 5
INDEX | Back to Main INDEX |
PREVIOUS | Skip to PREVIOUS Message |
NEXT | Skip to NEXT Message |
LIST | Reply to LIST Regarding this Message |
SENDER | Reply to SENDER Regarding this Message |
|
Subject: | Re: Making own graphics |
I met a guy down in TN who proclaimed that he is in the Guiness Book of World Records
for making the world's largest sign. He did it the way you describe with
a projector and scaffolding on a huge wall.
...but let's face it, these aren't structural glue joints. I think chalk and paint
get along just fine.
--------
Glenn Thomas
N?????
http://www.flyingwood.com
Read this topic online here:
http://forums.matronics.com/viewtopic.php?p=234549#234549
Message 6
INDEX | Back to Main INDEX |
PREVIOUS | Skip to PREVIOUS Message |
NEXT | Skip to NEXT Message |
LIST | Reply to LIST Regarding this Message |
SENDER | Reply to SENDER Regarding this Message |
|
Subject: | manuals for free download |
Just stumbled across a link on the Flybaby website that is likely of
interest to Pietenpol builders who are using traditional aircraft
engines for their powerplants. This site has lots of manuals for
Continental and Lycoming engines, as well as accessories and lots of
other good stuff. And they're all free downloads. Here's the link:
http://www.bomar.biz/download.php
Bill C.
Message 7
INDEX | Back to Main INDEX |
PREVIOUS | Skip to PREVIOUS Message |
NEXT | Skip to NEXT Message |
LIST | Reply to LIST Regarding this Message |
SENDER | Reply to SENDER Regarding this Message |
|
Subject: | Re: manuals for free download |
Bill, I'll go one step further, I think Pietenpol builders and flyers
are missing out if they don't use the FlyBaby site. Good info thru out.
Gene in wet Tennessee
----- Original Message -----
From: Bill Church
To: pietenpol-list@matronics.com
Sent: Saturday, March 14, 2009 3:20 PM
Subject: Pietenpol-List: manuals for free download
Just stumbled across a link on the Flybaby website that is likely of
interest to Pietenpol builders who are using traditional aircraft
engines for their powerplants. This site has lots of manuals for
Continental and Lycoming engines, as well as accessories and lots of
other good stuff. And they're all free downloads. Here's the link:
http://www.bomar.biz/download.php
Bill C.
-------------------------------------------------------------------------
-----
Checked by AVG.
3/14/2009 6:54 AM
Message 8
INDEX | Back to Main INDEX |
PREVIOUS | Skip to PREVIOUS Message |
NEXT | Skip to NEXT Message |
LIST | Reply to LIST Regarding this Message |
SENDER | Reply to SENDER Regarding this Message |
|
Subject: | Re: manuals for free download |
wonderful resource!
Message 9
INDEX | Back to Main INDEX |
PREVIOUS | Skip to PREVIOUS Message |
NEXT | Skip to NEXT Message |
LIST | Reply to LIST Regarding this Message |
SENDER | Reply to SENDER Regarding this Message |
|
Subject: | 2 Projects for sale |
Greetings all,
I have decided to attempt selling my two projects because of a job
change and lack of time/space. I just put it on Craigslist locally,
but wanted to let the list know also before doing a Barnstormers
listing.
Pictures and info can be found at
http://mykitplane.com/planes/photoGalleryIndividualList.cfm?PeopleID=77&FirstName=Kirk&LastName=Huizenga
Inventory - http://mykitplane.com/Planes/PeoplesFiles/Kirk-Piet-Inventory.xlsx
(this doesn't have everything) I also need to get all my Corvair
case numbers listed
http://aircamperman.wordpress.com/
Craigslist - http://minneapolis.craigslist.org/rvs/1075147858.html
You are all welcome to ask any questions - here is some generic info
> I am a member of the the Matronics Piet list and have been
> a builder for about 8 years. I currently own 2 Aircamper
> projects - #1 was built in the 80's, flew for a while
> and then donated to a aviation tech school. It was owned by
> the the Air National Guard Museum at MSP for a while and I
> bought it from the EAA Chapter 21 (Lake Elmo) in '00 or
> '01 as a parts project and have worked on it since then.
> #2 was purchased in '06 from Carl L who used to be on
> the Piet list. #1 has very good craftsmanship from the
> first builder (named Hans Meyer of MN) and hopefully me. #2
> needs more work and doesn't have great craftsmanship
> (lots of good modifiable parts though).
>
> I used to be a teacher and used these planes in my
> classroom- now I'm a pastor and haven't been able to
> put much time into building.
>
> I have pretty much all you would need to complete 1.5
> planes - hardware, instruments, 5+ Corvair engine cores (of
> varying usability in a plane) and a load of parts to go with
> them. I am working on an inventory right now.
Thanks
Kirk
St Paul, MN
651-774-5916
Message 10
INDEX | Back to Main INDEX |
PREVIOUS | Skip to PREVIOUS Message |
NEXT | Skip to NEXT Message |
LIST | Reply to LIST Regarding this Message |
SENDER | Reply to SENDER Regarding this Message |
|
Subject: | manuals for free download |
Has anyone ever written a "How To" manual for the Pietenpol Air Camper? Also
I am looking for a set of Aerial Pietenpol plans if anyone knows how or
where please contact me off line.
Rob Stapleton, Photojournalist
Anchorage, Alaska
907-230-9425
KL2AN
Skype:rob.stapleton.jr
IM Windows Live Messenger: foto@alaska.net
Email:foto@alaska.net
www.alaskafoto.com <http://www.alaskafoto.com/>
www.alaskasportpilotcenter.net <http://www.alaskasportpilotcenter.net/>
-----Original Message-----
From: owner-pietenpol-list-server@matronics.com
[mailto:owner-pietenpol-list-server@matronics.com] On Behalf Of Bill Church
Sent: Saturday, March 14, 2009 12:21 PM
Subject: Pietenpol-List: manuals for free download
Just stumbled across a link on the Flybaby website that is likely of
interest to Pietenpol builders who are using traditional aircraft engines
for their powerplants. This site has lots of manuals for Continental and
Lycoming engines, as well as accessories and lots of other good stuff. And
they're all free downloads. Here's the link:
http://www.bomar.biz/download.php
Bill C.
Message 11
INDEX | Back to Main INDEX |
PREVIOUS | Skip to PREVIOUS Message |
NEXT | Skip to NEXT Message |
LIST | Reply to LIST Regarding this Message |
SENDER | Reply to SENDER Regarding this Message |
|
Piets with the Model A engine, what is everyone using to keep values
from sticking?
920Y was airborne today for one hour after about 4 hours working to
unstick a exhaust value. I run 100LL and have been adding Marvel Mistery
oil in the fuel, but the question is how much?
Sure glad to see spring coming.
Chet
Message 12
INDEX | Back to Main INDEX |
PREVIOUS | Skip to PREVIOUS Message |
NEXT | Skip to NEXT Message |
LIST | Reply to LIST Regarding this Message |
SENDER | Reply to SENDER Regarding this Message |
|
Subject: | Re: manuals for free download |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 13
INDEX | Back to Main INDEX |
PREVIOUS | Skip to PREVIOUS Message |
NEXT | Skip to NEXT Message |
LIST | Reply to LIST Regarding this Message |
SENDER | Reply to SENDER Regarding this Message |
|
Subject: | Hay Field fly-in Winchester IN |
Group, when is the IN hayfield fly-in?- Andrew King told me to stop by la
st year at Brodhead if I wanted to see what it is all about.- I really wa
nt to get the time off of work and show up.- It looks like a really old f
asion good time.- It is only a couple hour flight from here I believe.
-
Shad=0A=0A=0A
Message 14
INDEX | Back to Main INDEX |
PREVIOUS | Skip to PREVIOUS Message |
NEXT | Skip to NEXT Message |
LIST | Reply to LIST Regarding this Message |
SENDER | Reply to SENDER Regarding this Message |
|
Subject: | Airport is in trouble!! |
if (typeof YAHOO == "undefined") {
var YAHOO = {};
}
YAHOO.Shortcuts = YAHOO.Shortcuts || {};
YAHOO.Shortcuts.hasSensitiveText = true;
YAHOO.Shortcuts.sensitivityType = ["sensitive_news_terms"];
YAHOO.Shortcuts.doUlt = false;
YAHOO.Shortcuts.location = "us";
YAHOO.Shortcuts.document_id = 0;
YAHOO.Shortcuts.document_type = "";
YAHOO.Shortcuts.document_title = "Airport is in trouble!";
YAHOO.Shortcuts.document_publish_date = "";
YAHOO.Shortcuts.document_author = "aviatorbell@yahoo.com";
YAHOO.Shortcuts.document_url = "";
YAHOO.Shortcuts.document_tags = "";
YAHOO.Shortcuts.document_language = "english";
YAHOO.Shortcuts.annotationSet = {
"lw_1237087091_0": {
"text": "Shad",
"extended": 0,
"startchar": 323,
"endchar": 326,
"start": 323,
"end": 326,
"extendedFrom": "",
"predictedCategory": "",
"predictionProbability": "0",
"weight": 0.223415,
"relScore": 2.54952,
"type": ["shortcuts:/concept"],
"category": ["CONCEPT"],
"wikiId": "Shad",
"relatedWikiIds": [],
"relatedEntities": [],
"showOnClick": [],
"context": "To all recieving this email, My name is Shad Bell, and this e
mail is sent to all aviation enthusiast",
"metaData": {
"visible": "false"
}
},
"lw_1237087091_1": {
"text": "grass airport community",
"extended": 0,
"startchar": 558,
"endchar": 580,
"start": 558,
"end": 580,
"extendedFrom": "",
"predictedCategory": "",
"predictionProbability": "0",
"weight": 0.477134,
"relScore": 6.14993,
"type": ["shortcuts:/concept"],
"category": ["CONCEPT"],
"wikiId": "",
"relatedWikiIds": [],
"relatedEntities": [],
"showOnClick": [],
"context": "to all aviation enthusiast I know. I live on a grass airport c
ommunity in central Ohio and the power company (Consolidated Electric Co-Op
",
"metaData": {
"visible": "false"
}
},
"lw_1237087091_2": {
"text": "power company",
"extended": 0,
"startchar": 664,
"endchar": 676,
"start": 664,
"end": 676,
"extendedFrom": "",
"predictedCategory": "",
"predictionProbability": "0",
"weight": 0.224661,
"relScore": 3.36795,
"type": ["shortcuts:/concept"],
"category": ["CONCEPT"],
"wikiId": "Power_Company",
"relatedWikiIds": [],
"relatedEntities": [],
"showOnClick": [],
"context": "on a grass airport community in central Ohio and the power comp
any (Consolidated Electric Co-Op) is trying to run 70+ ft power",
"metaData": {
"visible": "false"
}
}
};
YAHOO.Shortcuts.headerID = "bb98b98d7fe6a460412837bce46cdf6c";
To all recieving this email,
My name is Shad Bell, and this email is sent to all aviation enthusiast I k
now.- I live on a grass airport community in central Ohio-and the power
company (Consolidated Electric Co-Op) is trying to run 70+ ft power lines
directly over the top of the runway thresh hold.- After being notified of
this problem by the airport (runway) owner , I believe he said other than
right of way by the township there is no easement yet for the side of my pr
operty or the runway ( I live on a corner lot and the runway comes out to t
he side street).- This will effectivly shorten our runway about 1/3 from
3000 to 2000 ft.- With no warning I have survey steaks and pins driven in
my yard and back accross the runway.- To all of you who have any experia
nce with this "Bully the small guy" stuff I am looking for advise on stopin
g the power company from destroying this airport.- Eventually someone is
going to get killed from hitting a electric line 70 ft above a runway here,
(or nobody will be able to fly out of here anymore) .- Is there any hope
of stoping this from happening.- Should I contact EAA, and can they help
, AOPA?- This airport has been here for 30+ years and now it looks like s
ome a--hole with $$$$$ is going to tell me too bad so sad, and thanks for p
aying your electric bill on time every month.- Please feel free to let me
know any and all options we can fight this with.
-
Sincerly, Shad Bell
=0A=0A=0A
Message 15
INDEX | Back to Main INDEX |
PREVIOUS | Skip to PREVIOUS Message |
NEXT | Skip to NEXT Message |
LIST | Reply to LIST Regarding this Message |
SENDER | Reply to SENDER Regarding this Message |
|
Subject: | Re: Airport is in trouble!! |
Shad,
I just sent you per your personal email a 14-step outline of what you might do
to stop the pole line.
After you have read it, if you want to discuss, call me at 512.864.4158 (mobile).
Tim in central TX
do not archive
Message 16
INDEX | Back to Main INDEX |
PREVIOUS | Skip to PREVIOUS Message |
NEXT | Skip to NEXT Message |
LIST | Reply to LIST Regarding this Message |
SENDER | Reply to SENDER Regarding this Message |
|
Subject: | Re: Airport is in trouble!! |
Shad,
Contacting both EAA and AOPA certainly cannot hurt. I don't know offhand who
at EAA you would contact. If nothing else, try the general switchboard and
see if they know who to put you in touch with regarding airport advocacy (if
there is such a person).
AOPA has numerous Regional Affairs representatives. Ohio falls under the
"Eastern Region", and the listed rep for the Eastern Region is a gentleman
by the name of Gregory Winton. The contact info listed for him is an email
address: greg.winton@aopa.org. Based on what I see on AOPA Online, that
would seem to be the most logical initial point-of-contact that I could
find.
Good luck fighting the good fight!
Ryan
On Sat, Mar 14, 2009 at 10:19 PM, shad bell <aviatorbell@yahoo.com> wrote:
> To all recieving this email,
> My name is Shad Bell, and this email is sent to all aviation enthusiast I
> know. I live on a grass airport community in central Ohio and the power
> company (Consolidated Electric Co-Op) is trying to run 70+ ft power lines
> directly over the top of the runway thresh hold. After being notified of
> this problem by the airport (runway) owner , I believe he said other than
> right of way by the township there is no easement yet for the side of my
> property or the runway ( I live on a corner lot and the runway comes out to
> the side street). This will effectivly shorten our runway about 1/3 from
> 3000 to 2000 ft. With no warning I have survey steaks and pins driven in my
> yard and back accross the runway. To all of you who have any experiance
> with this "Bully the small guy" stuff I am looking for advise on stoping the
> power company from destroying this airport. Eventually someone is going to
> get killed from hitting a electric line 70 ft above a runway here, (or
> nobody will be able to fly out of here anymore) . Is there any hope of
> stoping this from happening. Should I contact EAA, and can they help,
> AOPA? This airport has been here for 30+ years and now it looks like some
> a--hole with $$$$$ is going to tell me too bad so sad, and thanks for paying
> your electric bill on time every month. Please feel free to let me know any
> and all options we can fight this with.
>
> Sincerly, Shad Bell
>
>
Other Matronics Email List Services
These Email List Services are sponsored solely by Matronics and through the generous Contributions of its members.
-- Please support this service by making your Contribution today! --
|