Today's Message Index:
----------------------
1. 08:24 AM - Re: Finally, work space! (Dan Yocum)
2. 09:43 AM - Driving to OSH from Brodhead (Patrick Panzera)
3. 11:58 AM - Re: McCulloch drone engine (Barry Davis)
4. 12:22 PM - Re: Finally, work space! (airlion@bellsouth.net)
5. 12:40 PM - Re: McCulloch drone engine (Jerry Dotson)
6. 01:18 PM - Chicago TFR, Thursday 7/23 (Dan Yocum)
7. 01:35 PM - TFRs for this Week (Wayne Bressler)
8. 01:44 PM - TFRs Again (Wayne Bressler)
9. 01:48 PM - Re: TFRs for this Week (Gary Boothe)
10. 01:55 PM - Re: Finally, work space! (Dick N.)
11. 02:10 PM - weather (helspersew@aol.com)
12. 02:10 PM - Re: TFRs for this Week (Wayne Bressler)
13. 02:17 PM - Re: McCulloch drone engine (Will42)
14. 02:24 PM - Re: weather (Bill Church)
15. 02:34 PM - Re: weather (helspersew@aol.com)
16. 03:52 PM - Re: opinions on ebay motorcycle wheels? (Jim Malley)
17. 04:40 PM - Re: Finally, work space! (airlion@bellsouth.net)
18. 07:42 PM - Re: weather (Lloyd Smith)
19. 08:12 PM - Re: TFRs for this Week (shad bell)
20. 08:42 PM - if flying....be aware of Presidential TFR's and Air Show TFR north of Mitchell Field, Milwaukee (Cuy, Michael D. (GRC-RXD0)[ASRC Aerospace Corporation])
21. 08:51 PM - Re: TFRs for this Week (Gary Boothe)
22. 08:51 PM - brodhead (RBush96589@aol.com)
23. 09:16 PM - Re: brodhead (shad bell)
Message 1
| INDEX | Back to Main INDEX |
| NEXT | Skip to NEXT Message |
| LIST | Reply to LIST Regarding this Message |
| SENDER | Reply to SENDER Regarding this Message |
|
| Subject: | Re: Finally, work space! |
Ryan,
I have some shop equipment that you're welcome to borrow if you want -
an *old* 7 1/4" Craftsman pedestal table saw, circa 1930-40's - it works
very well, tracks straight and the fence is tight, but it doesn't have
any sort of ruler - also have a flat plate to attach sanding disks so it
could be used for that, too; a Victor oxy-acetylene torch set; hand
drill; hand grinder; hand jig saw; a couple of hand planers; maybe some
other stuff.
It's all just sitting around the garage right now collecting dust - I
don't have much time to use it and no projects to use them on so if you
need something, let me know.
See you at Brodhead,
Dan
--
Dan Yocum
Fermilab 630.840.6509
yocum@fnal.gov, http://fermigrid.fnal.gov
Fermilab. Just zeros and ones.
Message 2
| INDEX | Back to Main INDEX |
| PREVIOUS | Skip to PREVIOUS Message |
| NEXT | Skip to NEXT Message |
| LIST | Reply to LIST Regarding this Message |
| SENDER | Reply to SENDER Regarding this Message |
|
| Subject: | Driving to OSH from Brodhead |
Hey gang,
I'll be leaving the field at Brodhead right after the launch on Sunday
morning.
If anyone needs me to tote gear, I'll have room in my car.
Contact me off list.
Pat
Editor@ContactMagazine.com
Message 3
| INDEX | Back to Main INDEX |
| PREVIOUS | Skip to PREVIOUS Message |
| NEXT | Skip to NEXT Message |
| LIST | Reply to LIST Regarding this Message |
| SENDER | Reply to SENDER Regarding this Message |
|
| Subject: | McCulloch drone engine |
I have one that is disassembled. Can take pics of it for you. Heading to
Oshkosh on Friday
Barry Davis
-----Original Message-----
From: owner-pietenpol-list-server@matronics.com
[mailto:owner-pietenpol-list-server@matronics.com] On Behalf Of Will42
Sent: Monday, July 20, 2009 5:17 PM
Subject: Pietenpol-List: McCulloch drone engine
I need a McCulloch drone engine for a project. If you have one or more for
sale and/or parts, please contact me. will@cctc.net Thanks so
much.........Will
Read this topic online here:
http://forums.matronics.com/viewtopic.php?p=253970#253970
Message 4
| INDEX | Back to Main INDEX |
| PREVIOUS | Skip to PREVIOUS Message |
| NEXT | Skip to NEXT Message |
| LIST | Reply to LIST Regarding this Message |
| SENDER | Reply to SENDER Regarding this Message |
|
| Subject: | Re: Finally, work space! |
Well, I had my cessna 140 all loaded up this morning to fly to Brodhead,and lo
and behold,when I checked with flight service for weather and TFR's they said
that for the next 5 days it will be rain and tystems. Not a good weekend for
camping and socializing with all you good people. So I will just stay here in
lAGRANGE, Ga. and work on my Piet. Just a few more projects and it will be ready
for inspection. If the weekend turns out better weatherwise please let me
know so I can weep more than I am now. Cheers, Gardiner Mason
-------------- Original message ----------------------
From: Dan Yocum <yocum@fnal.gov>
>
>
> Ryan,
>
> I have some shop equipment that you're welcome to borrow if you want -
> an *old* 7 1/4" Craftsman pedestal table saw, circa 1930-40's - it works
> very well, tracks straight and the fence is tight, but it doesn't have
> any sort of ruler - also have a flat plate to attach sanding disks so it
> could be used for that, too; a Victor oxy-acetylene torch set; hand
> drill; hand grinder; hand jig saw; a couple of hand planers; maybe some
> other stuff.
>
> It's all just sitting around the garage right now collecting dust - I
> don't have much time to use it and no projects to use them on so if you
> need something, let me know.
>
> See you at Brodhead,
> Dan
>
>
> --
> Dan Yocum
> Fermilab 630.840.6509
> yocum@fnal.gov, http://fermigrid.fnal.gov
> Fermilab. Just zeros and ones.
>
>
>
>
Message 5
| INDEX | Back to Main INDEX |
| PREVIOUS | Skip to PREVIOUS Message |
| NEXT | Skip to NEXT Message |
| LIST | Reply to LIST Regarding this Message |
| SENDER | Reply to SENDER Regarding this Message |
|
| Subject: | Re: McCulloch drone engine |
I found one on Craig's list Seattle for $150. http://seattle.craigslist.org/tac/pts/1279684749.html
Read this topic online here:
http://forums.matronics.com/viewtopic.php?p=254163#254163
Message 6
| INDEX | Back to Main INDEX |
| PREVIOUS | Skip to PREVIOUS Message |
| NEXT | Skip to NEXT Message |
| LIST | Reply to LIST Regarding this Message |
| SENDER | Reply to SENDER Regarding this Message |
|
| Subject: | Chicago TFR, Thursday 7/23 |
Just a heads up:
http://tfr.faa.gov/save_pages/detail_9_0041.html
--
Dan Yocum
Fermilab 630.840.6509
yocum@fnal.gov, http://fermigrid.fnal.gov
Fermilab. Just zeros and ones.
Message 7
| INDEX | Back to Main INDEX |
| PREVIOUS | Skip to PREVIOUS Message |
| NEXT | Skip to NEXT Message |
| LIST | Reply to LIST Regarding this Message |
| SENDER | Reply to SENDER Regarding this Message |
|
| Subject: | TFRs for this Week |
All,
Be careful en route to Brodhead, Baraboo, and Oshkosh.
Your President will be occupying a large amount of airspace on the
23rd. First in Cleveland, Ohio, and later that day he'll be in
Chicago, Illinois.
DO NOT VIOLATE THESE TFRs!!!
Cleveland, OH - July 23 from 1550z to 2055z. Multiple areas. FDC
NOTAM Number 9/0023
Chicago, IL - From July 23 at 2100z to July 24 at 0200z. Multiple
areas. FDC NOTAM Number 9/0041
These are big 30 nm TFRs, so please plan accordingly.
If you have any questions, call Flight Service before you go!
Have fun at the shows!!!
Wayne Bressler Jr.
Taildraggers, Inc.
taildraggersinc.com
Sent from the phone that made the Blackberry obsolete.
Message 8
| INDEX | Back to Main INDEX |
| PREVIOUS | Skip to PREVIOUS Message |
| NEXT | Skip to NEXT Message |
| LIST | Reply to LIST Regarding this Message |
| SENDER | Reply to SENDER Regarding this Message |
|
If you want to see details for any TFR, go to tfr.faa.gov
Wayne Bressler Jr.
Taildraggers, Inc.
taildraggersinc.com
Sent from the phone that made the Blackberry obsolete.
Message 9
| INDEX | Back to Main INDEX |
| PREVIOUS | Skip to PREVIOUS Message |
| NEXT | Skip to NEXT Message |
| LIST | Reply to LIST Regarding this Message |
| SENDER | Reply to SENDER Regarding this Message |
|
| Subject: | TFRs for this Week |
I can't believe he would schedule his trips the same time as
Brodhead....sheesh!
Gary Boothe
Cool, Ca.
Pietenpol
WW Corvair Conversion
Tail done, Fuselage on gear
(13 ribs down.)
Do not archive
-----Original Message-----
From: owner-pietenpol-list-server@matronics.com
[mailto:owner-pietenpol-list-server@matronics.com] On Behalf Of Wayne
Bressler
Sent: Tuesday, July 21, 2009 1:33 PM
TailwindForum@yahoogroups.com
Subject: Pietenpol-List: TFRs for this Week
<wayne@taildraggersinc.com>
All,
Be careful en route to Brodhead, Baraboo, and Oshkosh.
Your President will be occupying a large amount of airspace on the
23rd. First in Cleveland, Ohio, and later that day he'll be in
Chicago, Illinois.
DO NOT VIOLATE THESE TFRs!!!
Cleveland, OH - July 23 from 1550z to 2055z. Multiple areas. FDC
NOTAM Number 9/0023
Chicago, IL - From July 23 at 2100z to July 24 at 0200z. Multiple
areas. FDC NOTAM Number 9/0041
These are big 30 nm TFRs, so please plan accordingly.
If you have any questions, call Flight Service before you go!
Have fun at the shows!!!
Wayne Bressler Jr.
Taildraggers, Inc.
taildraggersinc.com
Sent from the phone that made the Blackberry obsolete.
Message 10
| INDEX | Back to Main INDEX |
| PREVIOUS | Skip to PREVIOUS Message |
| NEXT | Skip to NEXT Message |
| LIST | Reply to LIST Regarding this Message |
| SENDER | Reply to SENDER Regarding this Message |
|
| Subject: | Re: Finally, work space! |
Gardiner
I am in St. Paul, Mn. From here the weather looks pretty good. There is
always a chance of Tstms all summer. Greg Cardinal and I are each flying
our Piets tomorrow and should be sitting around with a cold beer by happy
hour time.
Dick
----- Original Message -----
From: <airlion@bellsouth.net>
Sent: Tuesday, July 21, 2009 1:52 PM
Subject: Re: Pietenpol-List: Finally, work space!
Well, I had my cessna 140 all loaded up this morning to fly to
Brodhead,and lo and behold,when I checked with flight service for weather
and TFR's they said that for the next 5 days it will be rain and tystems.
Not a good weekend for camping and socializing with all you good people. So
I will just stay here in lAGRANGE, Ga. and work on my Piet. Just a few more
projects and it will be ready for inspection. If the weekend turns out
better weatherwise please let me know so I can weep more than I am now.
Cheers, Gardiner Mason
-------------- Original message ----------------------
From: Dan Yocum <yocum@fnal.gov>
>
>
> Ryan,
>
> I have some shop equipment that you're welcome to borrow if you want -
> an *old* 7 1/4" Craftsman pedestal table saw, circa 1930-40's - it works
> very well, tracks straight and the fence is tight, but it doesn't have
> any sort of ruler - also have a flat plate to attach sanding disks so it
> could be used for that, too; a Victor oxy-acetylene torch set; hand
> drill; hand grinder; hand jig saw; a couple of hand planers; maybe some
> other stuff.
>
> It's all just sitting around the garage right now collecting dust - I
> don't have much time to use it and no projects to use them on so if you
> need something, let me know.
>
> See you at Brodhead,
> Dan
>
>
> --
> Dan Yocum
> Fermilab 630.840.6509
> yocum@fnal.gov, http://fermigrid.fnal.gov
> Fermilab. Just zeros and ones.
>
>
Message 11
| INDEX | Back to Main INDEX |
| PREVIOUS | Skip to PREVIOUS Message |
| NEXT | Skip to NEXT Message |
| LIST | Reply to LIST Regarding this Message |
| SENDER | Reply to SENDER Regarding this Message |
|
WX?at Poplar Grove IL is VFR, overcast with very light sprinkles. But I see on
radar that there is an area of yellow heading this way.
Dan Helsper
Message 12
| INDEX | Back to Main INDEX |
| PREVIOUS | Skip to PREVIOUS Message |
| NEXT | Skip to NEXT Message |
| LIST | Reply to LIST Regarding this Message |
| SENDER | Reply to SENDER Regarding this Message |
|
| Subject: | Re: TFRs for this Week |
Don't feel too down about it. He shut down a 30 nm chunk of busy New
York airspace recently to take his wife out for a date.
Do not archive.
Wayne Bressler Jr.
Taildraggers, Inc.
taildraggersinc.com
Sent from the phone that made the Blackberry obsolete.
On Jul 21, 2009, at 4:43 PM, "Gary Boothe" <gboothe5@comcast.net> wrote:
> >
>
> I can't believe he would schedule his trips the same time as
> Brodhead....sheesh!
>
> Gary Boothe
> Cool, Ca.
> Pietenpol
> WW Corvair Conversion
> Tail done, Fuselage on gear
> (13 ribs down.)
> Do not archive
>
> -----Original Message-----
> From: owner-pietenpol-list-server@matronics.com
> [mailto:owner-pietenpol-list-server@matronics.com] On Behalf Of Wayne
> Bressler
> Sent: Tuesday, July 21, 2009 1:33 PM
> To: dcpilots@yahoogroups.com; pietenpol-list@matronics.com;
> TailwindForum@yahoogroups.com
> Subject: Pietenpol-List: TFRs for this Week
>
> <wayne@taildraggersinc.com>
>
> All,
>
> Be careful en route to Brodhead, Baraboo, and Oshkosh.
>
> Your President will be occupying a large amount of airspace on the
> 23rd. First in Cleveland, Ohio, and later that day he'll be in
> Chicago, Illinois.
>
> DO NOT VIOLATE THESE TFRs!!!
>
> Cleveland, OH - July 23 from 1550z to 2055z. Multiple areas. FDC
> NOTAM Number 9/0023
>
> Chicago, IL - From July 23 at 2100z to July 24 at 0200z. Multiple
> areas. FDC NOTAM Number 9/0041
>
> These are big 30 nm TFRs, so please plan accordingly.
>
> If you have any questions, call Flight Service before you go!
>
> Have fun at the shows!!!
>
> Wayne Bressler Jr.
> Taildraggers, Inc.
> taildraggersinc.com
>
> Sent from the phone that made the Blackberry obsolete.
>
>
Message 13
| INDEX | Back to Main INDEX |
| PREVIOUS | Skip to PREVIOUS Message |
| NEXT | Skip to NEXT Message |
| LIST | Reply to LIST Regarding this Message |
| SENDER | Reply to SENDER Regarding this Message |
|
| Subject: | Re: McCulloch drone engine |
bed(at)mindspring.com wrote:
> I have one that is disassembled. Can take pics of it for you. Heading to
> Oshkosh on Friday
> Barry Davis
>
> --
I would be interested to see what you have. Pictures, condition and price if you
can. will@cctc.net Thanks so much.........Will
Read this topic online here:
http://forums.matronics.com/viewtopic.php?p=254189#254189
Message 14
| INDEX | Back to Main INDEX |
| PREVIOUS | Skip to PREVIOUS Message |
| NEXT | Skip to NEXT Message |
| LIST | Reply to LIST Regarding this Message |
| SENDER | Reply to SENDER Regarding this Message |
|
That really doesn't sound good ... yellow sprinkles.
Better get the umbrella out.
as usual,
Do Not Archive
________________________________
From: owner-pietenpol-list-server@matronics.com
[mailto:owner-pietenpol-list-server@matronics.com] On Behalf Of
helspersew@aol.com
Sent: Tuesday, July 21, 2009 5:08 PM
Subject: Pietenpol-List: weather
WX at Poplar Grove IL is VFR, overcast with very light sprinkles. But I
see on radar that there is an area of yellow heading this way.
Message 15
| INDEX | Back to Main INDEX |
| PREVIOUS | Skip to PREVIOUS Message |
| NEXT | Skip to NEXT Message |
| LIST | Reply to LIST Regarding this Message |
| SENDER | Reply to SENDER Regarding this Message |
|
Yea, that is the precursor to "raining cats and dogs"
please do not archive
-----Original Message-----
From: Bill Church <eng@canadianrogers.com>
Sent: Tue, Jul 21, 2009 4:22 pm
Subject: RE: Pietenpol-List: weather
That really doesn't sound good ... yellow sprinkles.
Better get the umbrella out.
?
as usual,
?
Do Not Archive
From: owner-pietenpol-list-server@matronics.com [mailto:owner-pietenpol-list-server@matronics.com] On Behalf Of helspersew@aol.com
Sent: Tuesday, July 21, 2009 5:08 PM
Subject: Pietenpol-List: weather
WX?at Poplar Grove IL is VFR, overcast with very light sprinkles. But I see on
radar that there is an area of yellow heading this way.
Message 16
| INDEX | Back to Main INDEX |
| PREVIOUS | Skip to PREVIOUS Message |
| NEXT | Skip to NEXT Message |
| LIST | Reply to LIST Regarding this Message |
| SENDER | Reply to SENDER Regarding this Message |
|
| Subject: | Re: opinions on ebay motorcycle wheels? |
I first used narrow motorcycle wheels with a 5/8 inch axle. Under normal
abuse the axle (a six inch bolt) did not bend even though it was
supported only on one end; nor did the wheels give in due to side loads.
However, when I intentionally ground looped it to avoid a tree during an
off airport landing, the wheel collapsed, there was almost no other
damage (the bolt was also bent a few degrees). Unable to find an exact
match, I made a new pair with a six inch width and a 1-1/4 axle. Again,
normal abuse was fine, as would be expected, but a few years later when
I went into a two foot deep ditch the wheels proved their strength by
holding up fine but they transmitted the forces up the landing gear leg
and the fuselage side was torn open. That repair took a lot longer.
Jim Malley
----- Original Message -----
From: Ken Chambers
To: pietenpol-list@matronics.com
Sent: Monday, July 20, 2009 2:10 PM
Subject: Re: Pietenpol-List: opinions on ebay motorcycle wheels?
Thats a sweet setup Gary. Never thought of that. I might be able to
make something like that work.
For tyhe dirt bike wheels I'm looking at, I've emailed the seller to
ask the axle diameter but I haven't heard back. Also trying to figure
out how wide the spoke is, hub to hub.
Speaking of brakes, there is a flange with four holes on one side. You
can see it in the attached photo
On Mon, Jul 20, 2009 at 10:46 AM, Gary Boothe <gboothe5@comcast.net>
wrote:
Ken,
I have no machining skills, or tools, either. Attached is a picture
of how I made it happen: Just figured out a way to chuck the axle to
one of my =BD=94 drills and used wet-or-dry paper to remove the steel;
took about 45 minutes ' 1 hour per axle.
A solid axle is being used by many, but you did not say how big of
an axle your bearings might take.
Gary Boothe
Cool, Ca.
Pietenpol
WW Corvair Conversion
Tail done, Fuselage on gear
(13 ribs down=85)
-------------------------------------------------------------------------
---
From: owner-pietenpol-list-server@matronics.com
[mailto:owner-pietenpol-list-server@matronics.com] On Behalf Of Ken
Chambers
Sent: Monday, July 20, 2009 8:21 AM
To: pietenpol-list@matronics.com
Subject: Re: Pietenpol-List: opinions on ebay motorcycle wheels?
Thanks Gary. That's a beautiful setup you have. I have no machining
skills or tools so I'm trying to figure out a way to do it as simply as
possible with the split axle gear.
I wonder if anyone uses solid axles? Heavier, sure, but would it
hold up. On a motorcycle it's supported on both ends by the fork.
On Mon, Jul 20, 2009 at 8:03 AM, Gary Boothe <gboothe5@comcast.net>
wrote:
Ken,
You will likely get the usual discussion on the pros & cons of using
motorcycle wheels, so you will have to make your own decision on that. I
bought 21=94 Harley Sportster wheels with the bearings replaced to
receive 1=94 axles. I then used Dick Navatril=92s idea of an 1 =BC=94
axle (tube) with step-down tubes installed. My step-down tubes run in
about 18=94 on each end, with the 1=94 OD axle being the last. I had to
actually mil this one as it was .004=94 over 1=94!
=93Wheels 1=94 shows that the Harley hub has 5 pre-drilled and
threaded holes for the disc brake set up on motorcycles. I match-drilled
this layout on my drub brake shoe and attached the shoe with a cover
disc (=931187=94).
The wheels you are showing have a very interesting spoke attach
method, and you may be challenged to find a way to attach brakes, either
disc or drum.
I am certainly no expert, and mine is not flight-proven. Good luck!!
Gary Boothe
Cool, Ca.
Pietenpol
WW Corvair Conversion
Tail done, Fuselage on gear
(13 ribs down=85)
-------------------------------------------------------------------------
---
From: owner-pietenpol-list-server@matronics.com
[mailto:owner-pietenpol-list-server@matronics.com] On Behalf Of Ken
Chambers
Sent: Sunday, July 19, 2009 3:59 PM
To: pietenpol-list@matronics.com
Subject: Pietenpol-List: opinions on ebay motorcycle wheels?
Anyone with motorcycle wheel experience care to offer an opinion on
these dirt bike wheels?
Think they'd be strong enough to handle the side loads? Any thoughts
on attaching brakes? Machining them for a bigger axle? Or could keep the
existing bearings with a solid axle?
I've emailed to ask hub width and axle diameter but haven't heard
back yet. Looks like the hub width is maybe 3 inches?
http://contact.ebay.com/ebaymotors/ws/eBayISAPI.dll?ShowCoreAskSellerQues
tion&&iid=190248078501&requested=giovannibikes&frm=284&redirect=0
&noredirectfaq=1&SSPageName=PageAskSellerQuestion_FAQ
--
Ken Chambers
512-796-1798
http://www.matronics.com/Navigator?Pietenpol-Listhttp://forums.matronics.
comhttp://www.matronics.com/contribution
--
Ken Chambers
512-796-1798
Message 17
| INDEX | Back to Main INDEX |
| PREVIOUS | Skip to PREVIOUS Message |
| NEXT | Skip to NEXT Message |
| LIST | Reply to LIST Regarding this Message |
| SENDER | Reply to SENDER Regarding this Message |
|
| Subject: | Re: Finally, work space! |
Dick, thanks for the reply and I will be thinking about you guys this week. Next
week to kosh should be pretty good wx wise. Gardiner.
-------------- Original message ----------------------
From: "Dick N." <horzpool@goldengate.net>
>
>
> Gardiner
> I am in St. Paul, Mn. From here the weather looks pretty good. There is
> always a chance of Tstms all summer. Greg Cardinal and I are each flying
> our Piets tomorrow and should be sitting around with a cold beer by happy
> hour time.
> Dick
> ----- Original Message -----
> From: <airlion@bellsouth.net>
> To: <pietenpol-list@matronics.com>
> Sent: Tuesday, July 21, 2009 1:52 PM
> Subject: Re: Pietenpol-List: Finally, work space!
>
>
>
> Well, I had my cessna 140 all loaded up this morning to fly to
> Brodhead,and lo and behold,when I checked with flight service for weather
> and TFR's they said that for the next 5 days it will be rain and tystems.
> Not a good weekend for camping and socializing with all you good people. So
> I will just stay here in lAGRANGE, Ga. and work on my Piet. Just a few more
> projects and it will be ready for inspection. If the weekend turns out
> better weatherwise please let me know so I can weep more than I am now.
> Cheers, Gardiner Mason
> -------------- Original message ----------------------
> From: Dan Yocum <yocum@fnal.gov>
> >
> >
> > Ryan,
> >
> > I have some shop equipment that you're welcome to borrow if you want -
> > an *old* 7 1/4" Craftsman pedestal table saw, circa 1930-40's - it works
> > very well, tracks straight and the fence is tight, but it doesn't have
> > any sort of ruler - also have a flat plate to attach sanding disks so it
> > could be used for that, too; a Victor oxy-acetylene torch set; hand
> > drill; hand grinder; hand jig saw; a couple of hand planers; maybe some
> > other stuff.
> >
> > It's all just sitting around the garage right now collecting dust - I
> > don't have much time to use it and no projects to use them on so if you
> > need something, let me know.
> >
> > See you at Brodhead,
> > Dan
> >
> >
> > --
> > Dan Yocum
> > Fermilab 630.840.6509
> > yocum@fnal.gov, http://fermigrid.fnal.gov
> > Fermilab. Just zeros and ones.
> >
> >
> >
> >
>
>
>
>
>
>
>
>
>
>
>
>
>
Message 18
| INDEX | Back to Main INDEX |
| PREVIOUS | Skip to PREVIOUS Message |
| NEXT | Skip to NEXT Message |
| LIST | Reply to LIST Regarding this Message |
| SENDER | Reply to SENDER Regarding this Message |
|
Rain all day in Brodhead, mostly light showers with fairly high ceiling.
We're camped just nw of Brodhead town. Looking forward to Thursday.
On Tue, Jul 21, 2009 at 5:29 PM, <helspersew@aol.com> wrote:
> Yea, that is the precursor to "raining cats and dogs"
>
> please do not archive
>
>
> -----Original Message-----
> From: Bill Church <eng@canadianrogers.com>
> To: pietenpol-list@matronics.com
> Sent: Tue, Jul 21, 2009 4:22 pm
> Subject: RE: Pietenpol-List: weather
>
> That really doesn't sound good ... yellow sprinkles.
> Better get the umbrella out.
>
> as usual,
>
> Do Not Archive
>
> ------------------------------
> *From:* owner-pietenpol-list-server@matronics.com [
> mailto:owner-pietenpol-list-server@matronics.com<owner-pietenpol-list-server@matronics.com?>]
> *On Behalf Of *helspersew@aol.com
> *Sent:* Tuesday, July 21, 2009 5:08 PM
> *To:* pietenpol-list@matronics.com
> *Subject:* Pietenpol-List: weather
>
> WX at Poplar Grove IL is VFR, overcast with very light sprinkles. But I
> see on radar that there is an area of yellow heading this way.
>
> *
> *
>
> *
>
> *
>
> *
>
> *
>
>
--
"Politics is the art of looking for trouble, finding it whether it exists or
not, diagnosing it incorrectly, and applying the wrong remedy." --British
publisher and writer Ernest Benn (1875-1954)
Message 19
| INDEX | Back to Main INDEX |
| PREVIOUS | Skip to PREVIOUS Message |
| NEXT | Skip to NEXT Message |
| LIST | Reply to LIST Regarding this Message |
| SENDER | Reply to SENDER Regarding this Message |
|
| Subject: | TFRs for this Week |
I sure as hell did not vote for that piece of @$#%
Shad
Message 20
| INDEX | Back to Main INDEX |
| PREVIOUS | Skip to PREVIOUS Message |
| NEXT | Skip to NEXT Message |
| LIST | Reply to LIST Regarding this Message |
| SENDER | Reply to SENDER Regarding this Message |
|
| Subject: | if flying....be aware of Presidential TFR's and Air Show |
TFR north of Mitchell Field, Milwaukee
For anyone transiting thru the Cleveland Class B airspace on Thursday-- beware
that President Obama's visit has a TFR going
into effect at 11:50 AM thru 5:00 pm.
Coincidentally, another TFR goes into effect at 5 pm EDT for CHICAGO.....until
later that same evening. (again, President Obama)
Also take note that just north of Milwaukee (if you're flying up the shoreline
of Lake Michigan to Oshkosh) there is a Thursday thru Sunday
TFR north of Mitchell Field for both daytime and night time performances/air show
routines. Check out all TFR's at your favorite web
site or the FAA site:
http://tfr.faa.gov/tfr2/list.html
(TFR= Temporary Flight Restriction)
Should you be unfortunate enough to bust a TFR accidentally, know the procedures
should you be intercepted....they
like it when you cooperate much better:)
http://www.aopa.org/whatsnew/newsitems/2001/010918intercept.html
Message 21
| INDEX | Back to Main INDEX |
| PREVIOUS | Skip to PREVIOUS Message |
| NEXT | Skip to NEXT Message |
| LIST | Reply to LIST Regarding this Message |
| SENDER | Reply to SENDER Regarding this Message |
|
| Subject: | TFRs for this Week |
Shad,
I'd like to buy you a beer...after all the flying's done, of course. I'll be
in Brodhead Thursday morning...
Gary Boothe
Cool, Ca.
Pietenpol
WW Corvair Conversion
Tail done, Fuselage on gear
(13 ribs down.)
Do not archive
-----Original Message-----
From: owner-pietenpol-list-server@matronics.com
[mailto:owner-pietenpol-list-server@matronics.com] On Behalf Of shad bell
Sent: Tuesday, July 21, 2009 8:10 PM
Subject: RE: Pietenpol-List: TFRs for this Week
I sure as hell did not vote for that piece of @$#%
Shad
Message 22
| INDEX | Back to Main INDEX |
| PREVIOUS | Skip to PREVIOUS Message |
| NEXT | Skip to NEXT Message |
| LIST | Reply to LIST Regarding this Message |
| SENDER | Reply to SENDER Regarding this Message |
|
Shad,
When are you and your dad planning on leaving for Brodhead?
I am shooting for early Thursday if the weather permits.how about you
Jack?
Randy Bush
NX294RB
do not archive
**************What's for dinner tonight? Find quick and easy dinner ideas
for any occasion.
(http://food.aol.com/dinner-tonight?ncid=emlcntusfood00000009)
Message 23
| INDEX | Back to Main INDEX |
| PREVIOUS | Skip to PREVIOUS Message |
| NEXT | Skip to NEXT Message |
| LIST | Reply to LIST Regarding this Message |
| SENDER | Reply to SENDER Regarding this Message |
|
Randy, We plan on Thurs morning, I guess We'll have to light the afterburners to
stay ahead of our tax dollars, I mean the big shiny 747 with the presidential
seal. Hope to se you there.
Shad
>
>
>
>
>
> Shad,
> When are you and your dad planning on leaving
> for Brodhead?
> I am shooting for early Thursday if the
> weather permits.how
> about you Jack?
>
> Randy Bush
> NX294RB
> do not archive What's for dinner tonight?
> Find quick
> and easy dinner ideas for any occasion.
>
>
>
>
>
Other Matronics Email List Services
These Email List Services are sponsored solely by Matronics and through the generous Contributions of its members.
-- Please support this service by making your Contribution today! --
|