Today's Message Index:
----------------------
1. 12:53 AM - Re: Vinyl gap seal for 3 pce. wing (Clif Dawson)
2. 12:53 AM - Re: Vinyl gap seal for 3 pce. wing (Clif Dawson)
3. 12:59 AM - Re: Re: Bending plywood (Clif Dawson)
4. 04:39 AM - wing gap seals (Douwe Blumberg)
5. 06:04 AM - Rubeck Ribs (tbyh@aol.com)
6. 06:04 AM - Fw: Re: Bending plywood (Michael Perez)
7. 06:14 AM - Re: Re: Bending plywood exelent (Gary Boothe)
8. 06:24 AM - Re: Re: Bending plywood (Gary Boothe)
9. 08:41 AM - Re: Re: Bending plywood (Bill Church)
10. 08:50 AM - Re: Re: Bending plywood (Gary Boothe)
11. 08:59 AM - Re: Re: Bending plywood (Michael Perez)
12. 09:14 AM - Yet another reason to hate me... (Ryan Mueller)
13. 09:14 AM - Mike Perez's workshop (Cuy, Michael D. (GRC-RXD0)[ASRC Aerospace Corporation])
14. 09:28 AM - Re: Yet another reason to hate me... (Bill Church)
15. 09:51 AM - Re: Yet another reason to hate me... (Ryan Mueller)
16. 09:55 AM - Yet another reason to hate me... (Cuy, Michael D. (GRC-RXD0)[ASRC Aerospace Corporation])
17. 09:55 AM - Re: Yet another reason to hate me... (Michael Perez)
18. 09:55 AM - Re: Yet another reason to hate me... (Gary Boothe)
19. 12:14 PM - Re: Re: Bending plywood (H RULE)
20. 12:59 PM - Yet another reason to hate me... (Oscar Zuniga)
21. 01:11 PM - Re: Yet another reason to hate me... (Gary Boothe)
22. 01:35 PM - Re: Yet another reason to hate me... (Ryan Mueller)
23. 02:32 PM - Re: Re Static port (Dan Yocum)
24. 02:48 PM - Re: Re Static port (Gene & Tammy)
25. 03:54 PM - Re: Yet another reason to hate me... (airlion)
26. 04:53 PM - Re: Yet another reason to hate me... (Jack Phillips)
27. 05:54 PM - Re: Yet another reason to hate me... (Gary Boothe)
28. 07:34 PM - Re: Yet another reason to hate me... (K5YAC)
29. 08:05 PM - Re: Vinyl gap seal for 3 pce. wing.ok (jorge lizarraga)
30. 08:11 PM - Re: Re: Bending plywood.exelent (jorge lizarraga)
31. 11:18 PM - Re: Re: Bending plywood.exelent (Clif Dawson)
Message 1
INDEX | Back to Main INDEX |
NEXT | Skip to NEXT Message |
LIST | Reply to LIST Regarding this Message |
SENDER | Reply to SENDER Regarding this Message |
|
Subject: | Re: Vinyl gap seal for 3 pce. wing |
OK, here's a few. First the plug ready to fiberglass the bottom.
I positioned the basic plug in the wing where I wanted it,
surounded it with a single piece of matt board and glued
that to the plug with spray foam insulation.
That cap I got at Arlington for ten bucks. It's $335 in AS+S!
I made the fitting for it.
The last pic shows the final layout. The fuel line is just
sitting there. I need a couple of nut inserts before flairing
and bending it to fit.
Clif
>
> Hey Cliff! (Dawson)
>
> Do you have any pictures of your wing tank before install?
> You read my mind perfectly!!!
>
> Dave
Message 2
INDEX | Back to Main INDEX |
PREVIOUS | Skip to PREVIOUS Message |
NEXT | Skip to NEXT Message |
LIST | Reply to LIST Regarding this Message |
SENDER | Reply to SENDER Regarding this Message |
|
Subject: | Re: Vinyl gap seal for 3 pce. wing |
They say necessity is the mother of invention.
When I checked the 37 flair tools at a hundred
bucks I just couldn't justify that for two lousy
ends! So I simply made a head to fit over my
standard plumbing one. Seems to work fine.
This combo lathe-mill I agonized over buying
on sale for $1000 ( regular $1800! ) has paid for
itself at least once already! I walk in looking for
3/8" X 23 gauge pins and walk out with this thing.
Damn good thing I'm no longer married!
Clif
> Hey Cliff! (Dawson)
>
> Do you have any pictures of your wing tank before install?
> You read my mind perfectly!!!
>
> Dave
Message 3
INDEX | Back to Main INDEX |
PREVIOUS | Skip to PREVIOUS Message |
NEXT | Skip to NEXT Message |
LIST | Reply to LIST Regarding this Message |
SENDER | Reply to SENDER Regarding this Message |
|
Subject: | Re: Bending plywood |
Here's what I did. First I filled in and contoured the area
with really light and thick balsa then, using water based
contact cement, glued on 1/32 ply for a hard surface.
My thinking was that I was going to be putting weight
on that area every time I got in or out so I wanted the
solidity of bulk but I also wanted the thinness where the
ply overlay the stringers so there wouldn't be a significant
bump in the fabric. Yes I know, there's a certain amount
of anal involved! I just can't help it. :-)
Clif
----- Original Message -----
From: Gary Boothe
To: pietenpol-list@matronics.com
Sent: Thursday, November 05, 2009 3:21 PM
Subject: RE: Pietenpol-List: Re: Bending plywood
Steve,
Here a couple pics of turtle decks made out of 1/8" Plywood.no
steaming!
Gary Boothe
Cool, Ca.
Pietenpol
WW Corvair Conversion, mounted
Tail done, Fuselage on gear
(15 ribs down.)
-----Original Message-----
From: owner-pietenpol-list-server@matronics.com
[mailto:owner-pietenpol-list-server@matronics.com] On Behalf Of chase143
Sent: Thursday, November 05, 2009 11:33 AM
To: pietenpol-list@matronics.com
Subject: Pietenpol-List: Re: Bending plywood
Outstanding! Thanks guys. Great pictures and ideas. I'll check out WC
Piet as well. But sounds like no steaming and maybe 1/16 is the way to
go, hopefully this weekend.
Thanks again,
Steve
Read this topic online here:
http://forums.matronics.com/viewtopic.php?p=271236#271236
-------------------------------------------------------------------------
-----
Checked by AVG - www.avg.com
11/05/09 19:52:00
Message 4
INDEX | Back to Main INDEX |
PREVIOUS | Skip to PREVIOUS Message |
NEXT | Skip to NEXT Message |
LIST | Reply to LIST Regarding this Message |
SENDER | Reply to SENDER Regarding this Message |
|
Just read the kudos for Cliff's center section gap seal idea, but I can't find
what he did. Cliff, can you explain your method, or tell me where I can see some
pics. I'm getting ready to make mine.
Thanks
Douwe
Message 5
INDEX | Back to Main INDEX |
PREVIOUS | Skip to PREVIOUS Message |
NEXT | Skip to NEXT Message |
LIST | Reply to LIST Regarding this Message |
SENDER | Reply to SENDER Regarding this Message |
|
Yes, Charlie Rubeck sold sets of ribs for $300...considering the hours and
materials, he was working for way less than minimum wage! I would advise
anyone who has an opportunity to buy a set of completed ribs (assuming th
ey are well built), should buy 'em poste haste!
Meanwhile, we all miss Charlie and remember him...
Fred B.
La Crosse, WI
Message 6
INDEX | Back to Main INDEX |
PREVIOUS | Skip to PREVIOUS Message |
NEXT | Skip to NEXT Message |
LIST | Reply to LIST Regarding this Message |
SENDER | Reply to SENDER Regarding this Message |
|
Subject: | Re: Bending plywood |
-The first picture shows the stringers with the flat 1/2" wide tops...ugl
y under the fabric in my opinion. The second is the new shaped profile. The
third is the stringers with the new profile.-These pictures were taken w
ith the stringers just laid in place...nothing is attached or glued. I am n
ow working on that...should have them all in tomorrow.
-
-
Message 7
INDEX | Back to Main INDEX |
PREVIOUS | Skip to PREVIOUS Message |
NEXT | Skip to NEXT Message |
LIST | Reply to LIST Regarding this Message |
SENDER | Reply to SENDER Regarding this Message |
|
Subject: | Re: Bending plywood exelent |
Jorge,
Glad to hear you are welding..that means PROGRESS!!
Gary Boothe
Cool, Ca.
Pietenpol
WW Corvair Conversion, mounted
Tail done, Fuselage on gear
(15 ribs down.)
Do not archive
_____
From: owner-pietenpol-list-server@matronics.com
[mailto:owner-pietenpol-list-server@matronics.com] On Behalf Of jorge
lizarraga
Sent: Thursday, November 05, 2009 8:35 PM
Subject: RE: Pietenpol-List: Re: Bending plywood exelent
that is bery good Idea Gary tanks I take and put in my plane too look bery
nice to my seyou nex jorge from hanford, todays work in welding thinks
--- On Thu, 11/5/09, Gary Boothe <gboothe5@comcast.net> wrote:
From: Gary Boothe <gboothe5@comcast.net>
Subject: RE: Pietenpol-List: Re: Bending plywood
Steve,
Here a couple pics of turtle decks made out of 1/8" Plywood.no steaming!
Gary Boothe
Cool, Ca.
Pietenpol
WW Corvair Conversion, mounted
Tail done, Fuselage on gear
(15 ribs down.)
-----Original Message-----
From: owner-pietenpol-list-server@matronics.com
[mailto:owner-pietenpol-list-server@matronics.com] On Behalf Of chase143
Sent: Thursday, November 05, 2009 11:33 AM
Subject: Pietenpol-List: Re: Bending plywood
Outstanding! Thanks guys. Great pictures and ideas. I'll check out WC Piet
as well. But sounds like no steaming and maybe 1/16 is the way to go,
hopefully this weekend.
Thanks again,
Steve
Read this topic online here:
http://forums.matronics.com/viewtopic.php?p=271236#271236
Message 8
INDEX | Back to Main INDEX |
PREVIOUS | Skip to PREVIOUS Message |
NEXT | Skip to NEXT Message |
LIST | Reply to LIST Regarding this Message |
SENDER | Reply to SENDER Regarding this Message |
|
Subject: | Re: Bending plywood |
Great idea, Cliff! Plus, you did not have to struggle to get varnish under
all that plywood!
Gary Boothe
Cool, Ca.
Pietenpol
WW Corvair Conversion, mounted
Tail done, Fuselage on gear
(15 ribs down.)
Do not archive
_____
From: owner-pietenpol-list-server@matronics.com
[mailto:owner-pietenpol-list-server@matronics.com] On Behalf Of Clif Dawson
Sent: Friday, November 06, 2009 12:06 AM
Subject: Re: Pietenpol-List: Re: Bending plywood
Here's what I did. First I filled in and contoured the area
with really light and thick balsa then, using water based
contact cement, glued on 1/32 ply for a hard surface.
My thinking was that I was going to be putting weight
on that area every time I got in or out so I wanted the
solidity of bulk but I also wanted the thinness where the
ply overlay the stringers so there wouldn't be a significant
bump in the fabric. Yes I know, there's a certain amount
of anal involved! I just can't help it. :-)
Clif
----- Original Message -----
From: Gary Boothe <mailto:gboothe5@comcast.net>
Sent: Thursday, November 05, 2009 3:21 PM
Subject: RE: Pietenpol-List: Re: Bending plywood
Steve,
Here a couple pics of turtle decks made out of 1/8" Plywood.no steaming!
Gary Boothe
Cool, Ca.
Pietenpol
WW Corvair Conversion, mounted
Tail done, Fuselage on gear
(15 ribs down.)
-----Original Message-----
From: owner-pietenpol-list-server@matronics.com
[mailto:owner-pietenpol-list-server@matronics.com] On Behalf Of chase143
Sent: Thursday, November 05, 2009 11:33 AM
Subject: Pietenpol-List: Re: Bending plywood
Outstanding! Thanks guys. Great pictures and ideas. I'll check out WC Piet
as well. But sounds like no steaming and maybe 1/16 is the way to go,
hopefully this weekend.
Thanks again,
Steve
Read this topic online here:
http://forums.matronics.com/viewtopic.php?p=271236#271236
_____
- Release Date: 11/05/09 19:52:00
Message 9
INDEX | Back to Main INDEX |
PREVIOUS | Skip to PREVIOUS Message |
NEXT | Skip to NEXT Message |
LIST | Reply to LIST Regarding this Message |
SENDER | Reply to SENDER Regarding this Message |
|
Subject: | Re: Bending plywood |
Just a useless comment here... but, doesn't your wife get annoyed when
you build your airplane in the kitchen?
Then again, based on the tire marks, if she's okay with you working on
the car in the kitchen, then a little woodworking should be no
problem...
Seriously, though... Is that your workshop? I can see the reflection of
the cabinets in the floor!
A little more luxurious than Clif's "workshop".
________________________________
From: owner-pietenpol-list-server@matronics.com
[mailto:owner-pietenpol-list-server@matronics.com] On Behalf Of Michael
Perez
Sent: Friday, November 06, 2009 8:54 AM
Subject: Fw: Re: Pietenpol-List: Bending plywood
The first picture shows the stringers with the flat 1/2" wide
tops...ugly under the fabric in my opinion. The second is the new shaped
profile. The third is the stringers with the new profile. These pictures
were taken with the stringers just laid in place...nothing is attached
or glued. I am now working on that...should have them all in tomorrow.
Message 10
INDEX | Back to Main INDEX |
PREVIOUS | Skip to PREVIOUS Message |
NEXT | Skip to NEXT Message |
LIST | Reply to LIST Regarding this Message |
SENDER | Reply to SENDER Regarding this Message |
|
Subject: | Re: Bending plywood |
I think Michael uses Photoshop.
Gary Boothe
Cool, Ca.
Pietenpol
WW Corvair Conversion, mounted
Tail done, Fuselage on gear
(15 ribs down.)
Do not archive
_____
From: owner-pietenpol-list-server@matronics.com
[mailto:owner-pietenpol-list-server@matronics.com] On Behalf Of Bill Church
Sent: Friday, November 06, 2009 8:35 AM
Subject: RE: Re: Pietenpol-List: Bending plywood
Just a useless comment here... but, doesn't your wife get annoyed when you
build your airplane in the kitchen?
Then again, based on the tire marks, if she's okay with you working on the
car in the kitchen, then a little woodworking should be no problem...
Seriously, though... Is that your workshop? I can see the reflection of the
cabinets in the floor!
A little more luxurious than Clif's "workshop".
_____
From: owner-pietenpol-list-server@matronics.com
[mailto:owner-pietenpol-list-server@matronics.com] On Behalf Of Michael
Perez
Sent: Friday, November 06, 2009 8:54 AM
Subject: Fw: Re: Pietenpol-List: Bending plywood
The first picture shows the stringers with the flat 1/2" wide tops...ugly
under the fabric in my opinion. The second is the new shaped profile. The
third is the stringers with the new profile. These pictures were taken with
the stringers just laid in place...nothing is attached or glued. I am now
working on that...should have them all in tomorrow.
Message 11
INDEX | Back to Main INDEX |
PREVIOUS | Skip to PREVIOUS Message |
NEXT | Skip to NEXT Message |
LIST | Reply to LIST Regarding this Message |
SENDER | Reply to SENDER Regarding this Message |
|
Subject: | Re: Bending plywood |
Yes Bill, my workshop. I used kitchen cabinets because they are cheap and a
ll ready to go in. The counter tops are smooth and flat. The outer surfaces
of all of these are a breeze to clean.- It was a win-win for me.
-
I had one of my cars in the shop for two winters, then decided to put it ba
ck out in the garage with the others...It took up usable space and I was le
ery about hitting it with something, so I moved it.
-
Had I not had the shop the Piet. may have very well been built in the kitch
en!
-
(I wax the floor about every 3-5 years...8^)--- )
Message 12
INDEX | Back to Main INDEX |
PREVIOUS | Skip to PREVIOUS Message |
NEXT | Skip to NEXT Message |
LIST | Reply to LIST Regarding this Message |
SENDER | Reply to SENDER Regarding this Message |
|
Subject: | Yet another reason to hate me... |
Haha! Life is good! :P
Ryan
do not archive
Message 13
INDEX | Back to Main INDEX |
PREVIOUS | Skip to PREVIOUS Message |
NEXT | Skip to NEXT Message |
LIST | Reply to LIST Regarding this Message |
SENDER | Reply to SENDER Regarding this Message |
|
Subject: | Mike Perez's workshop |
I've visited Mike's workshop at his house last winter guys and you may as
well imagine that you're
actually entering a surgical area of a hospital with one notable exception.
There is way
more clutter in an operating room.
Mike just showed me his torque tube aileron control horn that he TIG welded
up (the airfoil shaped / two-halves job)
and it looked like it came out of a CNC machine---no distortions or warping
anywhere on the edge welds and
perfectly drilled and placed holes. My best control horns still had some
slight distortion and warpage but Mike's
look like a robotic welder welded them.
Mike's also the world's luckiest man as he has the full blessings of his wi
fe on this project and the stunning
1960's GTO he restored from the frame up.
Mike C.
Message 14
INDEX | Back to Main INDEX |
PREVIOUS | Skip to PREVIOUS Message |
NEXT | Skip to NEXT Message |
LIST | Reply to LIST Regarding this Message |
SENDER | Reply to SENDER Regarding this Message |
|
Subject: | Yet another reason to hate me... |
Not many wives are pleased when their husbands give them power tools for
their birthday ... or is that banner in the background just coincidence.
do not archive this either
________________________________
From: owner-pietenpol-list-server@matronics.com
[mailto:owner-pietenpol-list-server@matronics.com] On Behalf Of Ryan
Mueller
Sent: Friday, November 06, 2009 12:08 PM
Subject: Pietenpol-List: Yet another reason to hate me...
Haha! Life is good! :P
Ryan
do not archive
Message 15
INDEX | Back to Main INDEX |
PREVIOUS | Skip to PREVIOUS Message |
NEXT | Skip to NEXT Message |
LIST | Reply to LIST Regarding this Message |
SENDER | Reply to SENDER Regarding this Message |
|
Subject: | Re: Yet another reason to hate me... |
Entirely coincidence...although Jess's birthday is this month. That banner
is there, apparently, from a birthday get-together the airport owner had for
his wife a couple years ago. It just happened to be hanging there the day we
first were shown the barn, which was around my birthday in July. Go figure.
:P
Ryan
do not archive
On Fri, Nov 6, 2009 at 11:25 AM, Bill Church <eng@canadianrogers.com> wrote:
> Not many wives are pleased when their husbands give them power tools for
> their birthday ... or is that banner in the background just coincidence.
>
> do not archive this either
>
> ------------------------------
> *From:* owner-pietenpol-list-server@matronics.com [mailto:
> owner-pietenpol-list-server@matronics.com] *On Behalf Of *Ryan Mueller
> *Sent:* Friday, November 06, 2009 12:08 PM
> *To:* pietenpol-list@matronics.com
> *Subject:* Pietenpol-List: Yet another reason to hate me...
>
> Haha! Life is good! :P
>
> Ryan
>
> do not archive
>
> *
>
> *
>
>
Message 16
INDEX | Back to Main INDEX |
PREVIOUS | Skip to PREVIOUS Message |
NEXT | Skip to NEXT Message |
LIST | Reply to LIST Regarding this Message |
SENDER | Reply to SENDER Regarding this Message |
|
Subject: | Yet another reason to hate me... |
You're a blesses husband Ryan !
Mike C.
do not archive
Message 17
INDEX | Back to Main INDEX |
PREVIOUS | Skip to PREVIOUS Message |
NEXT | Skip to NEXT Message |
LIST | Reply to LIST Regarding this Message |
SENDER | Reply to SENDER Regarding this Message |
|
Subject: | Yet another reason to hate me... |
How cool is that!? The wife is out in the shop, on her birthday, (or maybe
it was one of the kids birthdays...) working with power tools making plane
parts...that sound about right?
-
"Happy birthday dear, now get back to work!"
-
Why do I feel now we will see a flood of funny shop pics?
Message 18
INDEX | Back to Main INDEX |
PREVIOUS | Skip to PREVIOUS Message |
NEXT | Skip to NEXT Message |
LIST | Reply to LIST Regarding this Message |
SENDER | Reply to SENDER Regarding this Message |
|
Subject: | Yet another reason to hate me... |
She already agreed to live in the barnger (barn/hanger)..do we need more
reasons?
Gary Boothe
Cool, Ca.
Pietenpol
WW Corvair Conversion, mounted
Tail done, Fuselage on gear
(15 ribs down.)
Do not archive
_____
From: owner-pietenpol-list-server@matronics.com
[mailto:owner-pietenpol-list-server@matronics.com] On Behalf Of Ryan Mueller
Sent: Friday, November 06, 2009 9:08 AM
Subject: Pietenpol-List: Yet another reason to hate me...
Haha! Life is good! :P
Ryan
do not archive
Message 19
INDEX | Back to Main INDEX |
PREVIOUS | Skip to PREVIOUS Message |
NEXT | Skip to NEXT Message |
LIST | Reply to LIST Regarding this Message |
SENDER | Reply to SENDER Regarding this Message |
|
Subject: | Re: Bending plywood |
Message 20
INDEX | Back to Main INDEX |
PREVIOUS | Skip to PREVIOUS Message |
NEXT | Skip to NEXT Message |
LIST | Reply to LIST Regarding this Message |
SENDER | Reply to SENDER Regarding this Message |
|
Subject: | Yet another reason to hate me... |
What's curious to me is that (in the photo, at least),
Jess looks like Sarah Palin.
do not archive
Oscar Zuniga
Air Camper NX41CC
San Antonio, TX
mailto: taildrags@hotmail.com
website at http://www.flysquirrel.net
Message 21
INDEX | Back to Main INDEX |
PREVIOUS | Skip to PREVIOUS Message |
NEXT | Skip to NEXT Message |
LIST | Reply to LIST Regarding this Message |
SENDER | Reply to SENDER Regarding this Message |
|
Subject: | Yet another reason to hate me... |
That's not curious at all, Oscar. I heard that Jess can shoot and field
dress a moose just as well as Sarah! I can see why Ryan treats her so
good...
Gary Boothe
Cool, Ca.
Pietenpol
WW Corvair Conversion, mounted
Tail done, Fuselage on gear
(15 ribs down.)
Do not archive
-----Original Message-----
From: owner-pietenpol-list-server@matronics.com
[mailto:owner-pietenpol-list-server@matronics.com] On Behalf Of Oscar Zuniga
Sent: Friday, November 06, 2009 12:55 PM
Subject: Pietenpol-List: Yet another reason to hate me...
What's curious to me is that (in the photo, at least),
Jess looks like Sarah Palin.
do not archive
Oscar Zuniga
Air Camper NX41CC
San Antonio, TX
mailto: taildrags@hotmail.com
website at http://www.flysquirrel.net
Message 22
INDEX | Back to Main INDEX |
PREVIOUS | Skip to PREVIOUS Message |
NEXT | Skip to NEXT Message |
LIST | Reply to LIST Regarding this Message |
SENDER | Reply to SENDER Regarding this Message |
|
Subject: | Re: Yet another reason to hate me... |
Hehe....I don't know who you've been talking to, Gary. She won't even kill a
bug!
However she does go shooting with me, and still has the most powerful
handgun in the relationship, a Ruger Super Redhawk (.44 Mag) passed on from
her father. I have five battle rifles to her zero thus far though, so I win
overall.
But Palin, Oscar? Ooh...there'll be some choice words over that comment. :P
Ryan
do not archive
On Fri, Nov 6, 2009 at 3:06 PM, Gary Boothe <gboothe5@comcast.net> wrote:
>
> That's not curious at all, Oscar. I heard that Jess can shoot and field
> dress a moose just as well as Sarah! I can see why Ryan treats her so
> good...
>
> Gary Boothe
> Cool, Ca.
> Pietenpol
> WW Corvair Conversion, mounted
> Tail done, Fuselage on gear
> (15 ribs down.)
> Do not archive
>
> -----Original Message-----
> From: owner-pietenpol-list-server@matronics.com
> [mailto:owner-pietenpol-list-server@matronics.com] On Behalf Of Oscar
> Zuniga
> Sent: Friday, November 06, 2009 12:55 PM
> To: Pietenpol List
> Subject: Pietenpol-List: Yet another reason to hate me...
>
>
>
> What's curious to me is that (in the photo, at least),
> Jess looks like Sarah Palin.
>
> do not archive
>
> Oscar Zuniga
> Air Camper NX41CC
> San Antonio, TX
> mailto: taildrags@hotmail.com
> website at http://www.flysquirrel.net
>
>
Message 23
INDEX | Back to Main INDEX |
PREVIOUS | Skip to PREVIOUS Message |
NEXT | Skip to NEXT Message |
LIST | Reply to LIST Regarding this Message |
SENDER | Reply to SENDER Regarding this Message |
|
Subject: | Re: Re Static port |
Graham,
There's a slight vacuum created in the cockpit, so while the reading
will be "close" it will be off. If you're ok with "close" then that
should be fine.
I just bought a non-heated strut mount pitot/static port from AS&S for
$20 and change. I still haven't mounted it yet, though.
Cheers,
Dan
--
Dan Yocum
Fermilab 630.840.6509
yocum@fnal.gov, http://fermigrid.fnal.gov
Fermilab. Just zeros and ones.
Message 24
INDEX | Back to Main INDEX |
PREVIOUS | Skip to PREVIOUS Message |
NEXT | Skip to NEXT Message |
LIST | Reply to LIST Regarding this Message |
SENDER | Reply to SENDER Regarding this Message |
|
Subject: | Re: Re Static port |
Or.......If you want to see how fast (or slow) your going you can..... look
down and see how fast things are going past, or, hold your hand out into
the slip stream and judge your speed by the force of the wind. Not sure
why 5 or even 10 mph makes any difference in a Piet. Fly the plane, fly the
plane, fly the plane. Enjoy the plane, enjoy the plane, enjoy the plane.
Just my 2 cents worth
Gene
N502R
----- Original Message -----
From: "Dan Yocum" <yocum@fnal.gov>
Sent: Friday, November 06, 2009 4:31 PM
Subject: Re: Pietenpol-List: Re Static port
>
> Graham,
>
> There's a slight vacuum created in the cockpit, so while the reading
> will be "close" it will be off. If you're ok with "close" then that
> should be fine.
>
> I just bought a non-heated strut mount pitot/static port from AS&S for
> $20 and change. I still haven't mounted it yet, though.
>
> Cheers,
> Dan
>
> --
> Dan Yocum
> Fermilab 630.840.6509
> yocum@fnal.gov, http://fermigrid.fnal.gov
> Fermilab. Just zeros and ones.
>
>
--------------------------------------------------------------------------------
Checked by AVG - www.avg.com
07:38:00
Message 25
INDEX | Back to Main INDEX |
PREVIOUS | Skip to PREVIOUS Message |
NEXT | Skip to NEXT Message |
LIST | Reply to LIST Regarding this Message |
SENDER | Reply to SENDER Regarding this Message |
|
Subject: | Yet another reason to hate me... |
Sounds like ya'll have great wives. I know you do Ryan, but I have never met Mrs.
Boothe ( I don't think). I have a great wife too . She likes paper work, gardening,
digging, electrickery and anything else that doesn't include actual
flying, unless it has two engines and two pilots. Maybe I will have to move up
to a beach baron to trick her out. Cheers, Gardiner Mason
--- On Fri, 11/6/09, Gary Boothe <gboothe5@comcast.net> wrote:
> From: Gary Boothe <gboothe5@comcast.net>
> Subject: RE: Pietenpol-List: Yet another reason to hate me...
> To: pietenpol-list@matronics.com
> Date: Friday, November 6, 2009, 12:26 PM
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
> She already
> agreed to live in the barnger
> (barn/hanger).do we need more
> reasons?
>
>
>
>
>
>
> Gary
> Boothe
>
> Cool,
> Ca.
>
> Pietenpol
>
>
> WW
> Corvair Conversion,
> mounted
>
> Tail
> done,Fuselageon gear
>
> (15
> ribs down)
>
> Do
> not archive
>
>
>
>
>
>
>
>
>
>
>
> From:
> owner-pietenpol-list-server@matronics.com
> [mailto:owner-pietenpol-list-server@matronics.com] On Behalf Of Ryan Mueller
>
> Sent: Friday,
> November 06, 2009
> 9:08 AM
>
> To:
> pietenpol-list@matronics.com
>
> Subject:
> Pietenpol-List: Yet
> another reason to hate me...
>
>
>
>
>
> Haha! Life is good! :P
>
>
>
> Ryan
>
>
>
> do not archive
>
>
>
>
>
>
>
>
>
>
> provided
>
>
Message 26
INDEX | Back to Main INDEX |
PREVIOUS | Skip to PREVIOUS Message |
NEXT | Skip to NEXT Message |
LIST | Reply to LIST Regarding this Message |
SENDER | Reply to SENDER Regarding this Message |
|
Subject: | Yet another reason to hate me... |
How did you get Sarah Palin to come run the router in your workshop?
_____
From: owner-pietenpol-list-server@matronics.com
[mailto:owner-pietenpol-list-server@matronics.com] On Behalf Of Cuy, Michael
D. (GRC-RXD0)[ASRC Aerospace Corporation]
Sent: Friday, November 06, 2009 12:48 PM
Subject: Pietenpol-List: Yet another reason to hate me...
You're a blesses husband Ryan !
Mike C.
do not archive
Message 27
INDEX | Back to Main INDEX |
PREVIOUS | Skip to PREVIOUS Message |
NEXT | Skip to NEXT Message |
LIST | Reply to LIST Regarding this Message |
SENDER | Reply to SENDER Regarding this Message |
|
Subject: | Yet another reason to hate me... |
Gardiner,
It is likely that you will never meet Mrs. Boothe. Concerning my flying, the
best thing I can say about her is that she doesn't stand in my way. However,
having mis-spent her youth on Harley's, she perked up a little when I bought
the 21" Sportster wheels; only to become disinterested again when she saw
the laminated struts, and the boards that will someday be my prop!
Weren't you about to fly yours?
Gary Boothe
Cool, Ca.
Pietenpol
WW Corvair Conversion, mounted
Tail done, Fuselage on gear
(15 ribs down)
Do not archive
-----Original Message-----
From: owner-pietenpol-list-server@matronics.com
[mailto:owner-pietenpol-list-server@matronics.com] On Behalf Of airlion
Sent: Friday, November 06, 2009 3:54 PM
Subject: RE: Pietenpol-List: Yet another reason to hate me...
Sounds like ya'll have great wives. I know you do Ryan, but I have never met
Mrs. Boothe ( I don't think). I have a great wife too . She likes paper
work, gardening, digging, electrickery and anything else that doesn't
include actual flying, unless it has two engines and two pilots. Maybe I
will have to move up to a beach baron to trick her out. Cheers, Gardiner
Mason
--- On Fri, 11/6/09, Gary Boothe <gboothe5@comcast.net> wrote:
> From: Gary Boothe <gboothe5@comcast.net>
> Subject: RE: Pietenpol-List: Yet another reason to hate me...
> To: pietenpol-list@matronics.com
> Date: Friday, November 6, 2009, 12:26 PM
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
> She already
> agreed to live in the barnger
> (barn/hanger).do we need more
> reasons?
>
>
>
>
>
>
> Gary
> Boothe
>
> Cool,
> Ca.
>
> Pietenpol
>
>
> WW
> Corvair Conversion,
> mounted
>
> Tail
> done,Fuselageon gear
>
> (15
> ribs down)
>
> Do
> not archive
>
>
>
>
>
>
>
>
>
>
>
> From:
> owner-pietenpol-list-server@matronics.com
> [mailto:owner-pietenpol-list-server@matronics.com] On Behalf Of Ryan
Mueller
>
> Sent: Friday,
> November 06, 2009
> 9:08 AM
>
> To:
> pietenpol-list@matronics.com
>
> Subject:
> Pietenpol-List: Yet
> another reason to hate me...
>
>
>
>
>
> Haha! Life is good! :P
>
>
>
> Ryan
>
>
>
> do not archive
>
>
>
>
>
>
>
>
>
>
> provided
>
>
Message 28
INDEX | Back to Main INDEX |
PREVIOUS | Skip to PREVIOUS Message |
NEXT | Skip to NEXT Message |
LIST | Reply to LIST Regarding this Message |
SENDER | Reply to SENDER Regarding this Message |
|
Subject: | Re: Yet another reason to hate me... |
We are lucky Ryan. Theresa will be helping me make sawdust this weekend too.
In fact, I didn't even have to ask... just about 20 minutes ago she said, "I'll
help you rip that plywood on Sunday if you want." She knows that I have a couple
of large pieces that I need to make into not-so-large pieces. Gotta love
it.
--------
Mark - working on wings
Read this topic online here:
http://forums.matronics.com/viewtopic.php?p=271442#271442
Message 29
INDEX | Back to Main INDEX |
PREVIOUS | Skip to PREVIOUS Message |
NEXT | Skip to NEXT Message |
LIST | Reply to LIST Regarding this Message |
SENDER | Reply to SENDER Regarding this Message |
|
Subject: | Re: Vinyl gap seal for 3 pce. wing.ok |
thats is bery good one tank were you found the gauge and like to now how you make
the tank what cain of resine you used and congratulation is perfect seyou jorge
from hanford
--- On Fri, 11/6/09, Clif Dawson <CDAWSON5854@shaw.ca> wrote:
From: Clif Dawson <CDAWSON5854@shaw.ca>
Subject: Re: Pietenpol-List: Vinyl gap seal for 3 pce. wing
OK, here's a few. First the plug ready to fiberglass the bottom.
I positioned the basic plug in the wing where I wanted it,
surounded it with a single piece of matt board and glued
that to the plug with spray foam insulation.
That cap I got at Arlington for ten bucks. It's $335 in AS+S!
I made the fitting for it.
The last pic shows the final layout. The fuel line is just
sitting there. I need a couple of nut inserts before flairing
and bending it to fit.
Clif
>
> Hey Cliff! (Dawson)
>
> Do you have any pictures of your wing tank before install?
> You read my mind perfectly!!!
>
> Dave
Message 30
INDEX | Back to Main INDEX |
PREVIOUS | Skip to PREVIOUS Message |
NEXT | Skip to NEXT Message |
LIST | Reply to LIST Regarding this Message |
SENDER | Reply to SENDER Regarding this Message |
|
Subject: | Re: Bending plywood.exelent |
that is beautyfull touch congrat..
--- On Fri, 11/6/09, Clif Dawson <CDAWSON5854@shaw.ca> wrote:
From: Clif Dawson <CDAWSON5854@shaw.ca>
Subject: Re: Pietenpol-List: Re: Bending plywood
=0A=0A =0A=0A =0A=0A=0A=0AHere's what I did. First I filled in and contoure
d =0Athe area=0Awith really light and thick balsa then, using water =0Abase
d=0Acontact cement, glued on 1/32 ply for a hard =0Asurface.=0A=C2-My thi
nking was that I was going to be =0Aputting weight=0Aon that area every tim
e I got in or out so I wanted =0Athe=0Asolidity of bulk but I also wanted t
he thinness =0Awhere the=0Aply overlay the stringers so there wouldn't be a
=0Asignificant=0Abump in the fabric. Yes I know, there's a certain =0Aamou
nt=0Aof anal involved! I just can't help it.=C2- =0A:-)=0A=C2-=0AClif
=0A=0A ----- Original Message ----- =0A From: =0A Gary =0A Boothe =0A
9 3:21 =0A PM=0A Subject: RE: Pietenpol-List: Re: Bending =0A plywood=0A
=0A =0A Steve, =0A =C2- =0A Here a couple pics of turtle decks made
out of 1/8=9D =0A Plywoodno steaming! =0A =C2- =0A
=0A =C2- =0A =0A =C2- =0A Gary Boothe =0A Cool, Ca. =0A Pieten
pol =0A WW Corvair Conversion, =0A mounted =0A Tail done, Fuselage on
=0A gear =0A (15 ribs down) =0A -----Original Message-----
From: owner-pietenpol-list-server@matronics.com =0A [mailto:owner-pietenpo
l-list-server@matronics.com] On Behalf Of =0A chase143
Sent: Thursday, November 05, 2009 11:33 AM
To:=0A pietenpol-list@matronics.com
Subject: =0A Pietenpol-List: Re: Bending plywood=0A =C2- =0A --> Piet
enpol-List message posted by: "chase143" =0A <chase143@aol.com> =0A =C2
- =0A Outstanding! Thanks guys. Great pictures and ideas. =0A I'll chec
k out WC Piet as well. But sounds like no steaming and maybe 1/16 is =0A t
he way to go, hopefully this weekend. =0A Thanks again, =0A Steve =0A
=C2- =0A =C2- =0A =C2- =0A =C2- =0A Read this topic online
=0A here: =0A =C2- =0A http://forums.matronics.com/viewtopic.php?p=
271236#271236 =0A =C2- =0A =C2- =0A =C2- =0A =C2- =0A =C2
- =0A =C2- =0A =C2- =0A =0A =0A =0A =0A =0A =0A =0A =0A
=0A =0A =0A =0A =0A =C2- =0A =C2- =0A =0A =0A=0A- =0ARelease
=0A Date: 11/05/09 =0A19:52:00
=0A=0A=0A
Message 31
INDEX | Back to Main INDEX |
PREVIOUS | Skip to PREVIOUS Message |
NEXT | Skip to NEXT Message |
LIST | Reply to LIST Regarding this Message |
SENDER | Reply to SENDER Regarding this Message |
|
Subject: | Re: Bending plywood.exelent |
Thanks Jorge. So the tank is vinyl ester resin. Apparently the only one
that is fuel proof. The guage is a very uniquely designed oil tank one.
The dial and the float assembly have no physical connection whatsoever,
The dial pointer and the floatshaft are magnetic. The hand follows the
float arm magneticaly through the dividing wall.
Oh, I forgot to mention before and didn't take pics but the tank has
four
baffles in it, two fore and aft and two across. They are glassed into
the
bottom but not the top.
Clif
----- Original Message -----
From: jorge lizarraga
To: pietenpol-list@matronics.com
Sent: Friday, November 06, 2009 8:11 PM
Subject: Re: Pietenpol-List: Re: Bending plywood.exelent
that is beautyfull touch congrat..
--- On Fri, 11/6/09, Clif Dawson <CDAWSON5854@shaw.ca> wrote:
From: Clif Dawson <CDAWSON5854@shaw.ca>
Subject: Re: Pietenpol-List: Re: Bending plywood
To: pietenpol-list@matronics.com
Date: Friday, November 6, 2009, 12:05 AM
Here's what I did. First I filled in and contoured the area
with really light and thick balsa then, using water based
contact cement, glued on 1/32 ply for a hard surface.
My thinking was that I was going to be putting weight
on that area every time I got in or out so I wanted the
solidity of bulk but I also wanted the thinness where the
ply overlay the stringers so there wouldn't be a significant
bump in the fabric. Yes I know, there's a certain amount
of anal involved! I just can't help it. :-)
Clif
----- Original Message -----
From: Gary Boothe
To: pietenpol-list@matronics.com
Sent: Thursday, November 05, 2009 3:21 PM
Subject: RE: Pietenpol-List: Re: Bending plywood
Steve,
Here a couple pics of turtle decks made out of 1/8=9D
Plywoodno steaming!
Gary Boothe
Cool, Ca.
Pietenpol
WW Corvair Conversion, mounted
Tail done, Fuselage on gear
(15 ribs down)
-----Original Message-----
From: owner-pietenpol-list-server@matronics.com
[mailto:owner-pietenpol-list-server@matronics.com] On Behalf Of chase143
Sent: Thursday, November 05, 2009 11:33 AM
To: pietenpol-list@matronics.com
Subject: Pietenpol-List: Re: Bending plywood
<chase143@aol.com>
Outstanding! Thanks guys. Great pictures and ideas. I'll
check out WC Piet as well. But sounds like no steaming and maybe 1/16 is
the way to go, hopefully this weekend.
Thanks again,
Steve
Read this topic online here:
http://forums.matronics.com/viewtopic.php?p=271236#271236
--------------------------------------------------------------------
- Release Date: 11/05/09 19:52:00
-------------------------------------------------------------------------
-----
Checked by AVG - www.avg.com
11/06/09 19:39:00
Other Matronics Email List Services
These Email List Services are sponsored solely by Matronics and through the generous Contributions of its members.
-- Please support this service by making your Contribution today! --
|