---------------------------------------------------------- Pietenpol-List Digest Archive --- Total Messages Posted Sat 02/13/10: 11 ---------------------------------------------------------- Today's Message Index: ---------------------- 1. 05:13 AM - Re: Re: inspection (airlion) 2. 05:47 AM - formation flying (Lawrence Williams) 3. 06:34 AM - Re: formation flying (Jeff Boatright) 4. 08:06 AM - Sportsman Pilot Article featuring Jack Phillips (Barry Davis) 5. 09:01 AM - Dan Wilson out there in Piet land? (Ryan Mueller) 6. 09:03 AM - Greg Menoche out there on the list? (Ryan Mueller) 7. 10:47 AM - Re: formation flying (Michael Perez) 8. 02:31 PM - Re: Low Flying Airplane Parts (V Groah) 9. 03:38 PM - venturi mounting location (kmordecai001@comcast.net) 10. 04:21 PM - Re: venturi mounting location (Jack Phillips) 11. 07:49 PM - Re: Low Flying Airplane Parts (Andrew M Eldredge) ________________________________ Message 1 _____________________________________ Time: 05:13:49 AM PST US From: airlion Subject: Re: Pietenpol-List: Re: inspection thanks for the comments Jerry. Will you be at Sun N Fun in April? I will be working in the wood workshop carving a spare prop. Look me up if you can. Gardiner --- On Fri, 2/12/10, Jerry Dotson wrote: > From: Jerry Dotson > Subject: Pietenpol-List: Re: inspection > To: pietenpol-list@matronics.com > Date: Friday, February 12, 2010, 2:45 PM > --> Pietenpol-List message posted > by: "Jerry Dotson" > > Gardiner congratulations to you. There was no doubt that it > would PASS. Guys I have been to his hangar and drooled on > NX840LM. Nice Corvair install too. It has a very nice cable > operated trim tab. > > -------- > Jerry Dotson > 59 Daniel Johnson Rd > Baker, FL 32531 > > Started building NX510JD July, 2009 > Ribs and tailfeathers done > using Lycoming O-235 > > > > > Read this topic online here: > > http://forums.matronics.com/viewtopic.php?p=286184#286184 > > > > > > > > Email Forum - > FAQ, > - MATRONICS WEB FORUMS - > List Contribution Web Site - > -Matt > Dralle, List Admin. > > > > ________________________________ Message 2 _____________________________________ Time: 05:47:07 AM PST US From: Lawrence Williams Subject: Pietenpol-List: formation flying Any further libelous comments about the velocity of my Air Camper will be r eferred to my legal team for action up to and including a match race (now t hat I have my new Super whizbang Lion Speed head and racing carb installed) for pink slips. - Non Pietenpol aircraft need not apply (which includes bastardized versions of Bernard's design and all those without Ford "A" engines or those with Fo rd "A" engines developing more horsepower than mine or any which have dimpl e tape on their props, non-original airfoils, vortex generators, pointy spi nners or any other cheesy tricks that might make them (unfairly) faster tha n mine). - Besides, I now have a nosewheel and an 0-290 that has necessitated the inst allation of a used Long-Eze canopy. Looks cool and goes like stink......... ..SO THERE, Boatright!!!!!! What's a guy named Boatright doing in aviation, anyway???? - Larry=0A=0A=0A ________________________________ Message 3 _____________________________________ Time: 06:34:51 AM PST US From: Jeff Boatright Subject: Re: Pietenpol-List: formation flying Don't make me pull the speed prop down out of the rafters! We can hit 105 mph with that baby. Once. >Any further libelous comments about the velocity of my Air Camper >-blahdeblahblah... > >Larry > ________________________________ Message 4 _____________________________________ Time: 08:06:54 AM PST US From: "Barry Davis" Subject: Pietenpol-List: Sportsman Pilot Article featuring Jack Phillips Jack Got my new issue of Sportsman Pilot yesterday and as always, sat down to read it from cover to cover. It started out with a good article about fellow EAA Director Susan Dusenbury and her Stinson project. As I made my way through the magazine, I was pleased to see your smiling face and a great multi-page article on you and your Pietenpol. Jack and Golda do a great job with this pub;ication and your article was no exception. I had heard the story of your off airport landing, but never did know the cause until now. We are all glad you took the time to fix it back and lead the Pietenpol charge. Got about 4" of snow last night (the most we have had in 8 or 9 years) and I love it. Almost hate to leave tomorrow for an EAA Fun Cruise to the Bahamas with our local chapter, but hey..........somebody's gotta do it! Sun n Fun Bound Barry Davis BIG PIET NX973BP ________________________________ Message 5 _____________________________________ Time: 09:01:17 AM PST US Subject: Pietenpol-List: Dan Wilson out there in Piet land? From: Ryan Mueller Sorry to use the list for this....Dan, if you see this can you please contact me at "rmueller23@gmail.com"? Been trying to reach you, but I think my emails may not be getting through. Thanks! Ryan Mueller rmueller23@gmail.com do not archive ________________________________ Message 6 _____________________________________ Time: 09:03:34 AM PST US Subject: Pietenpol-List: Greg Menoche out there on the list? From: Ryan Mueller Again, sorry to use the list for this... Greg, If you are out there, can you please email me at 'rmueller23@gmail.com'? I think my emails may not be getting through...thanks! Ryan Mueller rmueller23@gmail.com ________________________________ Message 7 _____________________________________ Time: 10:47:08 AM PST US From: Michael Perez Subject: Re: Pietenpol-List: formation flying That counts me out for sure. --- On Sat, 2/13/10, Lawrence Williams wrote: From: Lawrence Williams Subject: Pietenpol-List: formation flying Any further libelous comments about the velocity of my Air Camper will be r eferred to my legal team for action up to and including a match race (now t hat I have my new Super whizbang Lion Speed head and racing carb installed) for pink slips. - Non Pietenpol aircraft need not apply (which includes bastardized versions of Bernard's design and all those without Ford "A" engines or those with Fo rd "A" engines developing more horsepower than mine or any which have dimpl e tape on their props, non-original airfoils, vortex generators, pointy spi nners or any other cheesy tricks that might make them (unfairly) faster tha n mine). - Besides, I now have a nosewheel and an 0-290 that has necessitated the inst allation of a used Long-Eze canopy. Looks cool and goes like stink......... ..SO THERE, Boatright!!!!!! What's a guy named Boatright doing in aviation, anyway???? - Larry ________________________________ Message 8 _____________________________________ Time: 02:31:21 PM PST US From: V Groah Subject: RE: Pietenpol-List: Low Flying Airplane Parts Just wait until you work on the sheet metal=2C you will love the cuts on yo ur hands. Isn't this fun??? In all seriousness=2C we are doing something that we all enjoy=2C making stuff. There is no feeling of pride better tha n standing by something nice and being able to say=2C I built that. Keep h aving fun Gary=2C and all of you on the list for that mater. Vic Groah MX4 14MV . > From: gboothe5@comcast.net > To: pietenpol-list@matronics.com > Subject: Pietenpol-List: Low Flying Airplane Parts > Date: Fri=2C 12 Feb 2010 08:08:45 -0800 > > Definitely Piet related: > > Last night I ran afoul of the aft portion of my center section while work ing > on shoulder harnesses. Although it hurt a little=2C and bled a little=2C I > couldn't help but smile and wonder how many of my fellow builders have do ne > something similar? (or am I the only idiot in the room=2C as usual?) > > No doubt=2C some wise-aker will say=2C "That wouldn't have happened if yo u were > working on the ribs=2C as you should be." > > Gary Boothe > Cool=2C CA > Pietenpol > WW Corvair Conversion > Tail done=2C Fuselage on gear > 16 ribs done > > _________________________________________________________________ Hotmail: Trusted email with Microsoft=92s powerful SPAM protection. ________________________________ Message 9 _____________________________________ Time: 03:38:47 PM PST US From: kmordecai001@comcast.net Subject: Pietenpol-List: venturi mounting location Pieters, Anyone have experience on where to mount a vacuum venturi on a Piet?=C2- I=C2-traded some stuff I had laying around for a nice old brass Pioneer b rand venturi and matching turn indicator, and while this is sort-of overkil l for=C2-a Piet, the brass venturi will look really cool=C2-on the plan e=C2- :-) Just wondering if there is a best place to locate it, or similarly, places to avoid.=C2- Thanks in advance, Dave Mordecai Panacea, FL NX520SF ________________________________ Message 10 ____________________________________ Time: 04:21:16 PM PST US From: "Jack Phillips" Subject: RE: Pietenpol-List: venturi mounting location I've got one mounted on the belly of mine, between the two cockpits. I use it to power my Turn & Bank Indicator. No problems with that location and it works fine. Jack Phillips NX899JP Raleigh, NC _____ From: owner-pietenpol-list-server@matronics.com [mailto:owner-pietenpol-list-server@matronics.com] On Behalf Of kmordecai001@comcast.net Sent: Saturday, February 13, 2010 6:37 PM Subject: Pietenpol-List: venturi mounting location Pieters, Anyone have experience on where to mount a vacuum venturi on a Piet? I traded some stuff I had laying around for a nice old brass Pioneer brand venturi and matching turn indicator, and while this is sort-of overkill for a Piet, the brass venturi will look really cool on the plane :-) Just wondering if there is a best place to locate it, or similarly, places to avoid. Thanks in advance, Dave Mordecai Panacea, FL NX520SF ________________________________ Message 11 ____________________________________ Time: 07:49:33 PM PST US Subject: Re: Pietenpol-List: Low Flying Airplane Parts From: Andrew M Eldredge The last injury I got from my airplane was a fat lip from a strut that hit me in the teeth while taking the wings back off. It's about healed now, I guess I need to get back to work... On Sat, Feb 13, 2010 at 3:30 PM, V Groah wrote: > Just wait until you work on the sheet metal, you will love the cuts on > your hands. Isn't this fun??? In all seriousness, we are doing somethin g > that we all enjoy, making stuff. There is no feeling of pride better tha n > standing by something nice and being able to say, I built that. Keep hav ing > fun Gary, and all of you on the list for that mater. Vic Groah MX414MV . > > > From: gboothe5@comcast.net > > > To: pietenpol-list@matronics.com > > Subject: Pietenpol-List: Low Flying Airplane Parts > > Date: Fri, 12 Feb 2010 08:08:45 -0800 > > > > > Definitely Piet related: > > > > Last night I ran afoul of the aft portion of my center section while > working > > on shoulder harnesses. Although it hurt a little, and bled a little, I > > couldn't help but smile and wonder how many of my fellow builders have > done > > something similar? (or am I the only idiot in the room, as usual?) > > > > No doubt, some wise-aker will say, "That wouldn't have happened if you > were > > working on the ribs, as you should be." > > > > Gary Boothe > > Cool, CA > > Pietenpol > > WW Corvair Conversion > > Tail done, Fuselage on gear > > 16 ribs done > > > > > > ------------------------------ > Hotmail: Trusted email with Microsoft=92s powerful SPAM protection. Sign up > > * > =========== =========== =========== =========== > * > > -- Andrew M. Eldredge Sahuarita, AZ ------------------------------------------------------------------------------------- Other Matronics Email List Services ------------------------------------------------------------------------------------- Post A New Message pietenpol-list@matronics.com UN/SUBSCRIBE http://www.matronics.com/subscription List FAQ http://www.matronics.com/FAQ/Pietenpol-List.htm Web Forum Interface To Lists http://forums.matronics.com Matronics List Wiki http://wiki.matronics.com Full Archive Search Engine http://www.matronics.com/search 7-Day List Browse http://www.matronics.com/browse/pietenpol-list Browse Digests http://www.matronics.com/digest/pietenpol-list Browse Other Lists http://www.matronics.com/browse Live Online Chat! http://www.matronics.com/chat Archive Downloading http://www.matronics.com/archives Photo Share http://www.matronics.com/photoshare Other Email Lists http://www.matronics.com/emaillists Contributions http://www.matronics.com/contribution ------------------------------------------------------------------------------------- These Email List Services are sponsored solely by Matronics and through the generous Contributions of its members.