Today's Message Index:
----------------------
1. 05:53 AM - Trying to come up with a color scheme (John Fay)
2. 07:30 AM - project progress update (Michael Groah)
3. 07:35 AM - Re: Trying to come up with a color scheme (Gary Boothe)
4. 07:42 AM - Re: project progress update (Gary Boothe)
5. 07:56 AM - Re: project progress update (Ryan Mueller)
6. 08:00 AM - Re: Trying to come up with a color scheme (Chris)
7. 08:05 AM - Re: Trying to come up with a color scheme (Gary Boothe)
8. 08:24 AM - Re: project progress update (Jack Phillips)
9. 09:04 AM - Re: project progress update (Jim Boyer)
10. 09:06 AM - Re: Trying to come up with a color scheme (Jim Boyer)
11. 09:21 AM - Re: Trying to come up with a color scheme (Jim Boyer)
12. 12:21 PM - Re: Trying to come up with a color scheme (Mike Whaley)
13. 02:08 PM - Re: project progress update (V Groah)
14. 02:23 PM - Re: project progress update (Ryan Mueller)
15. 02:32 PM - Re: Trying to come up with a color scheme (John Fay)
16. 02:39 PM - Re: project progress update (V Groah)
17. 03:17 PM - Re: Broadhead 2010 (dgaldrich)
18. 03:58 PM - Fw: CorvAircraft> stolen aircraft trailer (Ryan Mueller)
19. 06:22 PM - Re: Riblett 612 or 613.5, and jigs too... (Allan Macklem)
20. 07:11 PM - Re: To Door or not to Door (ldmill)
21. 07:34 PM - Re: 4am Howitzer Shot? (ldmill)
22. 07:56 PM - Re: Re: 4am Howitzer Shot? (Dan Yocum)
23. 11:24 PM - Re: project progress update (Michael Groah)
Message 1
INDEX | Back to Main INDEX |
NEXT | Skip to NEXT Message |
LIST | Reply to LIST Regarding this Message |
SENDER | Reply to SENDER Regarding this Message |
|
Subject: | Trying to come up with a color scheme |
List:
Is there an internet source available for the Piet where you can take an
outline of the plane and fill in the colors to see what the plane would look
like with various color schemes?
John Fay
in Peoria
Message 2
INDEX | Back to Main INDEX |
PREVIOUS | Skip to PREVIOUS Message |
NEXT | Skip to NEXT Message |
LIST | Reply to LIST Regarding this Message |
SENDER | Reply to SENDER Regarding this Message |
|
Subject: | project progress update |
I don't post very often, as I like to sit back and just soak up the information
from everyone else,
but I told Gary Boothe I'd send him a pic or two updating the progress on my
cowl and I figured
I'd let everyone else see too. All of the firewall forward stuff really eats a
lot of time and seems like
it doesn't show. Friends drop by hearing that we have been working on the plane
and I'm sure they
can't see any progress. We do although, have the engine just about ready to
run, as soon as I get the
carb rebuilt and the air filter mounted. The cowl is getting closer, but there
is still a bunch to do there
as well. My dad (Vic) and I are still plugging away at it out here in
California, and may actually finish
it one of these days! Anyways, I'm gonna go grab my wife and daughter and go
enjoy the morning air
flying the Piper. Keep building!
Mike Groah
Tulare CA
Message 3
INDEX | Back to Main INDEX |
PREVIOUS | Skip to PREVIOUS Message |
NEXT | Skip to NEXT Message |
LIST | Reply to LIST Regarding this Message |
SENDER | Reply to SENDER Regarding this Message |
|
Subject: | Trying to come up with a color scheme |
John,
This is REALLY low tech, but you can save this jpg, then right click and
choose open with "Paint." You should have that program with most Microsoft
operating systems. That'll keep you busy for the rest of the day..
Gary Boothe
Cool, CA
Pietenpol
WW Corvair Conversion
Tail done, Fuselage on gear
20 ribs done
From: owner-pietenpol-list-server@matronics.com
[mailto:owner-pietenpol-list-server@matronics.com] On Behalf Of John Fay
Sent: Saturday, July 31, 2010 5:53 AM
Subject: Pietenpol-List: Trying to come up with a color scheme
List:
Is there an internet source available for the Piet where you can take an
outline of the plane and fill in the colors to see what the plane would look
like with various color schemes?
John Fay
in Peoria
Message 4
INDEX | Back to Main INDEX |
PREVIOUS | Skip to PREVIOUS Message |
NEXT | Skip to NEXT Message |
LIST | Reply to LIST Regarding this Message |
SENDER | Reply to SENDER Regarding this Message |
|
Subject: | project progress update |
Very clean, Mike!!
Gary Boothe
Cool, CA
Pietenpol
WW Corvair Conversion
Tail done, Fuselage on gear
20 ribs done
Do not archive
From: owner-pietenpol-list-server@matronics.com
[mailto:owner-pietenpol-list-server@matronics.com] On Behalf Of Michael
Groah
Sent: Saturday, July 31, 2010 7:29 AM
Subject: Pietenpol-List: project progress update
I don't post very often, as I like to sit back and just soak up the
information from everyone else,
but I told Gary Boothe I'd send him a pic or two updating the progress on my
cowl and I figured
I'd let everyone else see too. All of the firewall forward stuff really
eats a lot of time and seems like
it doesn't show. Friends drop by hearing that we have been working on the
plane and I'm sure they
can't see any progress. We do although, have the engine just about ready to
run, as soon as I get the
carb rebuilt and the air filter mounted. The
cowl is getting closer, but there is still a bunch to do there
as well. My dad (Vic) and I are still plugging away at it out here in
California, and may actually finish
it one of these days! Anyways, I'm gonna go grab my wife and daughter and
go enjoy the morning air
flying the Piper. Keep building!
Mike Groah
Tulare CA
Message 5
INDEX | Back to Main INDEX |
PREVIOUS | Skip to PREVIOUS Message |
NEXT | Skip to NEXT Message |
LIST | Reply to LIST Regarding this Message |
SENDER | Reply to SENDER Regarding this Message |
|
Subject: | Re: project progress update |
Wow...looking good Mike. With all due respect to other Corvair Piet
builders, that is quite possibly the most attractive Corvair cowling on a
Piet that I've seen yet. I take it you are either setup with a rear starter
or hand prop...?
Ryan
On Sat, Jul 31, 2010 at 9:28 AM, Michael Groah <dskogrover@yahoo.com> wrote:
> I don't post very often, as I like to sit back and just soak up the information
from everyone else,
> but I told Gary Boothe I'd send him a pic or two updating the progress on my
cowl and I figured
> I'd let everyone else see too. All of the firewall forward stuff really eats
a lot of time and seems like
> it doesn't show. Friends drop by hearing that we have been working on the plane
and I'm sure they
> can't see any progress. We do although, have the engine just about ready to
run, as soon as I get the
> carb rebuilt and the air filter mounted. The
> cowl is getting closer, but there is still a bunch to do there
> as well. My dad (Vic) and I are still plugging away at it out here in California,
and may actually finish
> it one of these days! Anyways, I'm gonna go grab my wife and daughter and go
enjoy the morning air
> flying the Piper. Keep building!
>
> Mike Groah
> Tulare CA
>
>
Message 6
INDEX | Back to Main INDEX |
PREVIOUS | Skip to PREVIOUS Message |
NEXT | Skip to NEXT Message |
LIST | Reply to LIST Regarding this Message |
SENDER | Reply to SENDER Regarding this Message |
|
Subject: | Trying to come up with a color scheme |
Try this
http://westcoastpiet.com/paint_piet_bmp_files.htm
Chris
Sacramento, Ca
Westcoastpiet.com
_____
From: owner-pietenpol-list-server@matronics.com
[mailto:owner-pietenpol-list-server@matronics.com] On Behalf Of John Fay
Sent: Saturday, July 31, 2010 5:53 AM
Subject: Pietenpol-List: Trying to come up with a color scheme
List:
Is there an internet source available for the Piet where you can take an
outline of the plane and fill in the colors to see what the plane would look
like with various color schemes?
John Fay
in Peoria
Message 7
INDEX | Back to Main INDEX |
PREVIOUS | Skip to PREVIOUS Message |
NEXT | Skip to NEXT Message |
LIST | Reply to LIST Regarding this Message |
SENDER | Reply to SENDER Regarding this Message |
|
Subject: | Trying to come up with a color scheme |
Chris,
You continue to amaze me!! You are a treasure!...now get that flying machine
done!!!
Gary Boothe
Cool, CA
Pietenpol
WW Corvair Conversion
Tail done, Fuselage on gear
20 ribs done
Do not archive
From: owner-pietenpol-list-server@matronics.com
[mailto:owner-pietenpol-list-server@matronics.com] On Behalf Of Chris
Sent: Saturday, July 31, 2010 7:59 AM
Subject: RE: Pietenpol-List: Trying to come up with a color scheme
Try this
http://westcoastpiet.com/paint_piet_bmp_files.htm
Chris
Sacramento, Ca
Westcoastpiet.com
_____
From: owner-pietenpol-list-server@matronics.com
[mailto:owner-pietenpol-list-server@matronics.com] On Behalf Of John Fay
Sent: Saturday, July 31, 2010 5:53 AM
Subject: Pietenpol-List: Trying to come up with a color scheme
List:
Is there an internet source available for the Piet where you can take an
outline of the plane and fill in the colors to see what the plane would look
like with various color schemes?
John Fay
in Peoria
href="http://www.matronics.com/Navigator?Pietenpol-List">http://www.matronic
s.com/Navigator?Pietenpol-List
href="http://forums.matronics.com">http://forums.matronics.com
href="http://www.matronics.com/contribution">http://www.matronics.com/c
Message 8
INDEX | Back to Main INDEX |
PREVIOUS | Skip to PREVIOUS Message |
NEXT | Skip to NEXT Message |
LIST | Reply to LIST Regarding this Message |
SENDER | Reply to SENDER Regarding this Message |
|
Subject: | project progress update |
Very nice, Mike. For whatever reason, it seems to be difficult to make a
nice looking cowl on a Corvair, but you've managed to do it.
Jack Phillips
NX899JP
Raleigh, NC
_____
From: owner-pietenpol-list-server@matronics.com
[mailto:owner-pietenpol-list-server@matronics.com] On Behalf Of Michael
Groah
Sent: Saturday, July 31, 2010 10:29 AM
Subject: Pietenpol-List: project progress update
I don't post very often, as I like to sit back and just soak up the
information from everyone else,
but I told Gary Boothe I'd send him a pic or two updating the progress on my
cowl and I figured
I'd let everyone else see too. All of the firewall forward stuff really
eats a lot of time and seems like
it doesn't show. Friends drop by hearing that we have been working on the
plane and I'm sure they
can't see any progress. We do although, have the engine just about ready to
run, as soon as I get the
carb rebuilt and the air filter mounted. The
cowl is getting closer, but there is still a bunch to do there
as well. My dad (Vic) and I are still plugging away at it out here in
California, and may actually finish
it one of these days! Anyways, I'm gonna go grab my wife and daughter and
go enjoy the morning air
flying the Piper. Keep building!
Mike Groah
Tulare CA
Message 9
INDEX | Back to Main INDEX |
PREVIOUS | Skip to PREVIOUS Message |
NEXT | Skip to NEXT Message |
LIST | Reply to LIST Regarding this Message |
SENDER | Reply to SENDER Regarding this Message |
|
Subject: | Re: project progress update |
Hi Mike,
Your cowling is looking good. Making it out of aluminium has got to be a real challenge;
you and your dad Vic are doing a nice job of it.
Now if you just had a 200 ton hydropress for the small stuff. We had one at the
Boeing plant I worked at and boy would that have made cowling and steel fitting
easy. Thats what my nightmares are made of.
Cheers,
Jim
----- Original Message -----
From: "Michael Groah" <dskogrover@yahoo.com>
Sent: Saturday, July 31, 2010 7:28:32 AM
Subject: Pietenpol-List: project progress update
I don't post very often, as I like to sit back and just soak up the information
from everyone else,
but I told Gary Boothe I'd send him a pic or two updating the progress on my cowl
and I figured
I'd let everyone else see too. All of the firewall forward stuff really eats a
lot of time and seems like
it doesn't show. Friends drop by hearing that we have been working on the plane
and I'm sure they
can't see any progress. We do although, have the engine just about ready to run,
as soon as I get the
carb rebuilt and the air filter mounted. The
cowl is getting closer, but there is still a bunch to do there
as well. My dad (Vic) and I are still plugging away at it out here in California,
and may actually finish
it one of these days! Anyways, I'm gonna go grab my wife and daughter and go enjoy
the morning air
flying the Piper. Keep building!
Mike Groah
Tulare CA
Message 10
INDEX | Back to Main INDEX |
PREVIOUS | Skip to PREVIOUS Message |
NEXT | Skip to NEXT Message |
LIST | Reply to LIST Regarding this Message |
SENDER | Reply to SENDER Regarding this Message |
|
Subject: | Re: Trying to come up with a color scheme |
It may be low tech Gary; but thanks for doing it. This will be fun to play
with.
Jim
----- Original Message -----
From: "Gary Boothe" <gboothe5@comcast.net>
Sent: Saturday, July 31, 2010 7:34:35 AM
Subject: RE: Pietenpol-List: Trying to come up with a color scheme
John,
This is REALLY low tech, but you can save this jpg, then right click and ch
oose open with =9CPaint.=9D You should have that program with m
ost Microsoft operating systems. That=99ll keep you busy for the rest
of the day.
Gary Boothe
Cool, CA
Pietenpol
WW Corvair Conversion
Tail done, Fuselage on gear
20 ribs done
From: owner-pietenpol-list-server@matronics.com [mailto:owner-pietenpol-lis
t-server@matronics.com] On Behalf Of John Fay
Sent: Saturday, July 31, 2010 5:53 AM
Subject: Pietenpol-List: Trying to come up with a color scheme
List:
Is there an internet source available for the Piet where you can take an ou
tline of the plane and fill in the colors to see what the plane would look
like with various color schemes?
John Fay
in Peoria =C2- =C2- http://www.matronics.com/Navigator?Pietenpol-List h
ttp://forums.matronics.com http://www.matronics.com/contribution =C2-
Message 11
INDEX | Back to Main INDEX |
PREVIOUS | Skip to PREVIOUS Message |
NEXT | Skip to NEXT Message |
LIST | Reply to LIST Regarding this Message |
SENDER | Reply to SENDER Regarding this Message |
|
Subject: | Re: Trying to come up with a color scheme |
Chris you must do these things in your spare time right? This Piet web site is
amazing; just ask and it usually turns right up. Especially at West Coast Piet.
Cheers,
Jim
----- Original Message -----
From: "Chris" <catdesigns@att.net>
Sent: Saturday, July 31, 2010 7:58:33 AM
Subject: RE: Pietenpol-List: Trying to come up with a color scheme
Try this
http://westcoastpiet.com/paint_piet_bmp_files.htm
Chris
Sacramento, Ca
Westcoastpiet.com
From: owner-pietenpol-list-server@matronics.com [mailto:owner-pietenpol-list-server@matronics.com] On Behalf Of John Fay
Sent: Saturday, July 31, 2010 5:53 AM
Subject: Pietenpol-List: Trying to come up with a color scheme
List:
Is there an internet source available for the Piet where you can take an outline
of the plane and fill in the colors to see what the plane would look like with
various color schemes?
John Fay
in Peoria
Message 12
INDEX | Back to Main INDEX |
PREVIOUS | Skip to PREVIOUS Message |
NEXT | Skip to NEXT Message |
LIST | Reply to LIST Regarding this Message |
SENDER | Reply to SENDER Regarding this Message |
|
Subject: | Re: Trying to come up with a color scheme |
Here's the one I use. Should work fine in Paint or pretty much any program.
Simple but it seems to give a good idea of things. when I'm bored or get an
idea I'll spend a few minutes to make up a new color scheme, must have a
hundred ideas by now. I think the original came from DJ Vegh way back when.
-Mike
Mike Whaley
MerlinFAC@cfl.rr.com
----- Original Message -----
From: "John Fay" <jfay1950@gmail.com>
Sent: Saturday, July 31, 2010 8:53 AM
Subject: [piet] Pietenpol-List: Trying to come up with a color scheme
> List:
>
> Is there an internet source available for the Piet where you can take an
> outline of the plane and fill in the colors to see what the plane would
look
> like with various color schemes?
>
> John Fay
> in Peoria
>
Message 13
INDEX | Back to Main INDEX |
PREVIOUS | Skip to PREVIOUS Message |
NEXT | Skip to NEXT Message |
LIST | Reply to LIST Regarding this Message |
SENDER | Reply to SENDER Regarding this Message |
|
Subject: | project progress update |
Just a note=2C the starter is in the front in the normal Corviar position.
Unfortunatly no press=2C just hand formed. VG
From: boyerjrb@comcast.net
Subject: Re: Pietenpol-List: project progress update
Hi Mike=2C
Your cowling is looking good. Making it out of aluminium has got to be a re
al challenge=3B you and your dad Vic are doing a nice job of it.
Now if you just had a 200 ton hydropress for the small stuff. We had one at
the Boeing plant I worked at and boy would that have made cowling and stee
l fitting easy. Thats what my nightmares are made of.
Cheers=2C
Jim
----- Original Message -----
From: "Michael Groah" <dskogrover@yahoo.com>
Sent: Saturday=2C July 31=2C 2010 7:28:32 AM
Subject: Pietenpol-List: project progress update
I don't post very often=2C as I like to sit back and just soak up the info
rmation from everyone else=2C
but I told Gary Boothe I'd send him a pic or two updating the progress on m
y cowl and I figured
I'd let everyone else see too. All of the firewall forward stuff really ea
ts a lot of time and seems like
it doesn't show. Friends drop by hearing that we have been working on the
plane and I'm sure they
can't see any progress. We do although=2C have the engine just about ready
to run=2C as soon as I get the
carb rebuilt and the air filter mounted. The
cowl is getting closer=2C but there is still a bunch to do there
as well. My dad (Vic) and I are still plugging away at it out here in Cali
fornia=2C and may actually finish
it one of these days! Anyways=2C I'm gonna go grab my wife and daughter an
d go enjoy the morning air
flying the Piper. Keep building!
Mike Groah
Tulare CA
Message 14
INDEX | Back to Main INDEX |
PREVIOUS | Skip to PREVIOUS Message |
NEXT | Skip to NEXT Message |
LIST | Reply to LIST Regarding this Message |
SENDER | Reply to SENDER Regarding this Message |
|
Subject: | Re: project progress update |
Wow, that is surprising. It sure doesn't look like there is room for the
ring gear in there. Any other pics would be greatly appreciated. Are you
driving the dynamo/alternator off the rear?
Thanks Vic,
Ryan
On Sat, Jul 31, 2010 at 4:07 PM, V Groah <vgroah@hotmail.com> wrote:
> Just a note, the starter is in the front in the normal Corviar position.
> Unfortunatly no press, just hand formed. VG
>
> ------------------------------
> Date: Sat, 31 Jul 2010 16:03:42 +0000
> From: boyerjrb@comcast.net
>
> To: pietenpol-list@matronics.com
> Subject: Re: Pietenpol-List: project progress update
>
>
> Hi Mike,
> Your cowling is looking good. Making it out of aluminium has got to be a
> real challenge; you and your dad Vic are doing a nice job of it.
> Now if you just had a 200 ton hydropress for the small stuff. We had one at
> the Boeing plant I worked at and boy would that have made cowling and steel
> fitting easy. Thats what my nightmares are made of.
> Cheers,
> Jim
>
>
> ----- Original Message -----
> From: "Michael Groah" <dskogrover@yahoo.com>
> To: pietenpol-list@matronics.com
> Sent: Saturday, July 31, 2010 7:28:32 AM
> Subject: Pietenpol-List: project progress update
>
>
> I don't post very often, as I like to sit back and just soak up the information
from everyone else,
> but I told Gary Boothe I'd send him a pic or two updating the progress on my
cowl and I figured
> I'd let everyone else see too. All of the firewall forward stuff really eats
a lot of time and seems like
> it doesn't show. Friends drop by hearing that we have been working on the plane
and I'm sure they
> can't see any progress. We do although, have the engine just about ready to
run, as soon as I get the
> carb rebuilt and the air filter mounted. The
> cowl is getting closer, but there is still a bunch to do there
> as well. My dad (Vic) and I are still plugging away at it out here in California,
and may actually finish
> it one of these days! Anyways, I'm gonna go grab my wife and daughter and go
enjoy the morning air
> flying the Piper. Keep building!
>
> Mike Groah
> Tulare CA
>
>
> *
>
> st" target=_blank>http://www.matronics.com/Navigator?Pietenpol-List
> ttp://forums.matronics.com
> =_blank>http://www.matronics.com/contribution
> *
>
> *
>
> *
>
>
Message 15
INDEX | Back to Main INDEX |
PREVIOUS | Skip to PREVIOUS Message |
NEXT | Skip to NEXT Message |
LIST | Reply to LIST Regarding this Message |
SENDER | Reply to SENDER Regarding this Message |
|
Subject: | Re: Trying to come up with a color scheme |
Thanks all for the info. I'm going to try them this evening.
John Fay
On Sat, Jul 31, 2010 at 7:53 AM, John Fay <jfay1950@gmail.com> wrote:
> List:
>
> Is there an internet source available for the Piet where you can take an
> outline of the plane and fill in the colors to see what the plane would look
> like with various color schemes?
>
> John Fay
> in Peoria
>
> **
>
>
Message 16
INDEX | Back to Main INDEX |
PREVIOUS | Skip to PREVIOUS Message |
NEXT | Skip to NEXT Message |
LIST | Reply to LIST Regarding this Message |
SENDER | Reply to SENDER Regarding this Message |
|
Subject: | project progress update |
We are running a John Deere lawn tractor dynamo off the rear pulley with a
larger driven pulley to slow the rotation some. We are also running a rpm
pick up off the ring gear at the top off the starter bracket. I am not sur
e just what photos you would like but we would be happy to send you somethi
ng if it would help.
It is a bit tight but it all fits. We are just short of starting the engin
e so everything is in place in there. We hope to finish the cowling soon.
We will not be able to work on the plane for a couple of weeks but then wa
nt to finish the cowling. Where are you on your build=2C I assume you are
using a Corvair as well? Vic
Subject: Re: Pietenpol-List: project progress update
From: rmueller23@gmail.com
Wow=2C that is surprising. It sure doesn't look like there is room for the
ring gear in there. Any other pics would be greatly appreciated. Are you dr
iving the dynamo/alternator off the rear?
Thanks Vic=2C
Ryan
On Sat=2C Jul 31=2C 2010 at 4:07 PM=2C V Groah <vgroah@hotmail.com> wrote:
Just a note=2C the starter is in the front in the normal Corviar position.
Unfortunatly no press=2C just hand formed. VG
From: boyerjrb@comcast.net
Subject: Re: Pietenpol-List: project progress update
Hi Mike=2C
Your cowling is looking good. Making it out of aluminium has got to be a re
al challenge=3B you and your dad Vic are doing a nice job of it.
Now if you just had a 200 ton hydropress for the small stuff. We had one at
the Boeing plant I worked at and boy would that have made cowling and stee
l fitting easy. Thats what my nightmares are made of.
Cheers=2C
Jim
----- Original Message -----
From: "Michael Groah" <dskogrover@yahoo.com>
Sent: Saturday=2C July 31=2C 2010 7:28:32 AM
Subject: Pietenpol-List: project progress update
I don't post very often=2C as I like to sit back and just soak up the info
rmation from everyone else=2C
but I told Gary Boothe I'd send him a pic or two updating the progress on m
y cowl and I figured
I'd let everyone else see too. All of the firewall forward stuff really ea
ts a lot of time and seems like
it doesn't show. Friends drop by hearing that we have been working on the
plane and I'm sure they
can't see any progress. We do although=2C have the engine just about ready
to run=2C as soon as I get the
carb rebuilt and the air filter mounted. The
cowl is getting closer=2C but there is still a bunch to do there
as well. My dad (Vic) and I are still plugging away at it out here in Cali
fornia=2C and may actually finish
it one of these days! Anyways=2C I'm gonna go grab my wife and daughter an
d go enjoy the morning air
flying the Piper. Keep building!
Mike Groah
Tulare CA
st" target=_blank>http://www.matronics.com/Navigator?Pietenpol-List
ttp://forums.matronics.com
=_blank>http://www.matronics.com/contribution
" target="_blank">http://www.matronics.com/Navigator?Pietenpol-List
tp://forums.matronics.com
_blank">http://www.matronics.com/contribution
Message 17
INDEX | Back to Main INDEX |
PREVIOUS | Skip to PREVIOUS Message |
NEXT | Skip to NEXT Message |
LIST | Reply to LIST Regarding this Message |
SENDER | Reply to SENDER Regarding this Message |
|
Subject: | Re: Broadhead 2010 |
Dale
You made my wife's weekend with her first ride in a Piet. I didn't know she was
out aviating and was looking for her since the prize givaway was starting.
When next I see her, she's walking from the flight line with a grin a mile across.
The misery from the storms of the previous days were wiped out with that
smile. Thanks.
Dave Aldrich
612 ribs done
tail feathers done
WW Corvair ready to run
Wife taught to rib stitch
Read this topic online here:
http://forums.matronics.com/viewtopic.php?p=306981#306981
Message 18
INDEX | Back to Main INDEX |
PREVIOUS | Skip to PREVIOUS Message |
NEXT | Skip to NEXT Message |
LIST | Reply to LIST Regarding this Message |
SENDER | Reply to SENDER Regarding this Message |
|
Subject: | Fwd: CorvAircraft> stolen aircraft trailer |
Stolen trailer....if you are down south at all, please give it a look.
Thanks,
Ryan
---------- Forwarded message ----------
From: Michael Amick <mkamick@bellsouth.net>
Subject: CorvAircraft> stolen aircraft trailer
see link for pic & info from a fellow aviator wanting help
<http://www.vansairforce.com/community/showthread.php?t=60733>
Michael Amick
Nashville
_________________________________________________________
search the CorvAircraft archives at
http://www.maddyhome.com/corvairsrch/index.jsp
to UNsubscribe from CorvAircraft, send a message to
CorvAircraft-leave@mylist.net
Other CorvAircraft list info is at
http://www.krnet.org/corvaircraft_inst.html
Message 19
INDEX | Back to Main INDEX |
PREVIOUS | Skip to PREVIOUS Message |
NEXT | Skip to NEXT Message |
LIST | Reply to LIST Regarding this Message |
SENDER | Reply to SENDER Regarding this Message |
|
Subject: | Re: Riblett 612 or 613.5, and jigs too... |
Message 20
INDEX | Back to Main INDEX |
PREVIOUS | Skip to PREVIOUS Message |
NEXT | Skip to NEXT Message |
LIST | Reply to LIST Regarding this Message |
SENDER | Reply to SENDER Regarding this Message |
|
Subject: | Re: To Door or not to Door |
My GN-1 actually has two doors. Check it out on westcoastpiet.com (N30PP). I REALLY
like having them. With no center section cutout or handhold, I can still
get in without doing the twister.
Lorin
--------
Lorin Miller
Waiex N81YX
GN-1 N30PP
Read this topic online here:
http://forums.matronics.com/viewtopic.php?p=307000#307000
Message 21
INDEX | Back to Main INDEX |
PREVIOUS | Skip to PREVIOUS Message |
NEXT | Skip to NEXT Message |
LIST | Reply to LIST Regarding this Message |
SENDER | Reply to SENDER Regarding this Message |
|
Subject: | Re: 4am Howitzer Shot? |
I was the guy in the enclosed black trailer camping out in the parking lot. Sitting
in that metal breadbox - when that "howitzer shot" went off - I thought he
camper was going to fold in on itself. It sounded like a ball-pean hammer was
hitting the trailer all night! My white 10x10 EZ-UP canopy collapsed from the
amount of rain. I was out every 15 minutes for almost 2 hours dumping rain
off it trying to keep the motorcycles dry. Gave up at 3am and the canopy looked
like a pretzel the next morning.
FYI - thanks to the Brodhead folks for letting me camp in the parking lot Sunday
night also! I blew a transmission line in the Suburban on Sunday morning just
as I was leaving for Oshkosh. I caught it at the gas station in town, and limped
back to the airport. Watched Kevin limp back after breaking his bungee cord
Sunday afternoon, then watched another movie at the hanger Sunday night (one
about the Canadian RCAF that was pretty lame, they forgot about the plot by
midpoint of the movie). Had the Sub at the chevy shop by 7:45 and it was fixed
by 8:30. They replaced the line for a total emergency fix of $120.
Many stories to tell this year!!
Lorin
--------
Lorin Miller
Waiex N81YX
GN-1 N30PP
Read this topic online here:
http://forums.matronics.com/viewtopic.php?p=307002#307002
Message 22
INDEX | Back to Main INDEX |
PREVIOUS | Skip to PREVIOUS Message |
NEXT | Skip to NEXT Message |
LIST | Reply to LIST Regarding this Message |
SENDER | Reply to SENDER Regarding this Message |
|
Subject: | Re: 4am Howitzer Shot? |
Kevin broke a bungee?
Dan
--
yocum@gmail.com
On Jul 31, 2010, at 9:34 PM, ldmill <lorin.miller@emerson.com> wrote:
>
> I was the guy in the enclosed black trailer camping out in the parking lot. Sitting
in that metal breadbox - when that "howitzer shot" went off - I thought
he camper was going to fold in on itself. It sounded like a ball-pean hammer
was hitting the trailer all night! My white 10x10 EZ-UP canopy collapsed from
the amount of rain. I was out every 15 minutes for almost 2 hours dumping rain
off it trying to keep the motorcycles dry. Gave up at 3am and the canopy looked
like a pretzel the next morning.
>
> FYI - thanks to the Brodhead folks for letting me camp in the parking lot Sunday
night also! I blew a transmission line in the Suburban on Sunday morning just
as I was leaving for Oshkosh. I caught it at the gas station in town, and
limped back to the airport. Watched Kevin limp back after breaking his bungee
cord Sunday afternoon, then watched another movie at the hanger Sunday night
(one about the Canadian RCAF that was pretty lame, they forgot about the plot
by midpoint of the movie). Had the Sub at the chevy shop by 7:45 and it was fixed
by 8:30. They replaced the line for a total emergency fix of $120.
>
> Many stories to tell this year!!
>
> Lorin
>
> --------
> Lorin Miller
> Waiex N81YX
> GN-1 N30PP
>
>
>
>
> Read this topic online here:
>
> http://forums.matronics.com/viewtopic.php?p=307002#307002
>
>
>
>
>
>
>
>
>
>
Message 23
INDEX | Back to Main INDEX |
PREVIOUS | Skip to PREVIOUS Message |
NEXT | Skip to NEXT Message |
LIST | Reply to LIST Regarding this Message |
SENDER | Reply to SENDER Regarding this Message |
|
Subject: | Re: project progress update |
Thank you everyone for the positive comments on our cowling. The ring gear
is up =0Afront and is a standard WW part along with the starter he recommen
ds (with his =0Anose gear).- Although the starter is in stock form (not m
odified for low =0Aclearance as WW sells so we probably could have gotten t
he top down a little =0Alower if we had done that). As my dad said it all f
its in there somehow.- I had =0Aa certain look I wanted that included a r
ounded nose and bottom and a tight fit =0Aaround the engine.- We've manag
ed to get most of the look i wanted with a few =0Aadjustments to conform wi
th reality.- While my dad won't be able to work on the =0Aplane for a cou
ple weeks as he said, I will keep working on it as time allows.- =0AHopef
ully I'll have it ready and we can run it together when he is available to
=0Awork on it again.- If we don't keep working on it Gary Boothe, Jim Boy
er, or =0AChris Tracy is going to beat us into the air out here in Californ
ia! =0A=0A=0AMike Groah=0A=0A=0A=0A=0A________________________________=0AFr
om: Ryan Mueller <rmueller23@gmail.com>=0ATo: pietenpol-list@matronics.com
=0ASent: Sat, July 31, 2010 2:22:03 PM=0ASubject: Re: Pietenpol-List: proje
ct progress update=0A=0AWow, that is surprising. It sure doesn't look like
there is room for the ring =0Agear in there. Any other pics would be greatl
y appreciated. Are you driving the =0Adynamo/alternator off the rear? =0A
=0A=0AThanks Vic,=0A=0ARyan=0A=0A=0AOn Sat, Jul 31, 2010 at 4:07 PM, V Groa
h <vgroah@hotmail.com> wrote:=0A=0AJust a note,-the starter is in the-f
ront in-the normal Corviar position.- =0AUnfortunatly no press, just ha
nd formed.- VG=0A>-=0A>________________________________=0ADate: Sat, 31
Jul 2010 16:03:42 +0000=0A>From: boyerjrb@comcast.net =0A>=0A>To: pietenpo
l-list@matronics.com=0A>Subject: Re: Pietenpol-List: project progress updat
e =0A>=0A>=0A>=0A>Hi Mike,=0A>Your cowling is looking good. Making it out o
f aluminium has got to be a real =0A>challenge; you and your dad Vic are do
ing a nice job of it.=0A>Now if you just had a 200 ton hydropress for the s
mall stuff. We had one at the =0A>Boeing plant I worked at and boy would th
at have made cowling and steel fitting =0A>easy. Thats what my nightmares a
re made of.=0A>Cheers, =0A>Jim=0A>-=0A>-=0A>=0A>----- Original Message
-----=0A>From: "Michael Groah" <dskogrover@yahoo.com>=0A>To: pietenpol-list
@matronics.com=0A>Sent: Saturday, July 31, 2010 7:28:32 AM=0A>Subject: Piet
enpol-List: project progress update=0A>=0A>=0A>=0A> I don't post very often
, as I like to sit back and just soak up the information =0A>from everyone
else, =0A>=0A> but I told Gary Boothe I'd send him a pic or two updating th
e progress on my =0A>cowl and I figured =0A>=0A>I'd let everyone else see t
oo. All of the firewall forward stuff really eats a =0A>lot of time and se
ems like =0A>=0A>it doesn't show. Friends drop by hearing that we have bee
n working on the plane =0A>and I'm sure they =0A>=0A> can't see any progres
s. We do although, have the engine just about ready to =0A>run, as soon as
I get the=0A>carb rebuilt and the air filter mounted. The=0A> cowl is get
ting closer, but there is still a bunch to do there =0A>as well. My dad (V
ic) and I are still plugging away at it out here in =0A>California, and may
actually finish =0A>=0A>it one of these days! Anyways, I'm gonna go grab
my wife and daughter and go =0A>enjoy the morning air =0A>=0A> flying the P
iper. Keep building!=0A>=0A>Mike Groah=0A>Tulare CA =0A>=0A>=0A> st" targ
et=_blank>http://www.matronics.com/Navigator?Pietenpol-List =0A>ttp://for
ums.matronics.com =_blank>http://www.matronics.com/contribution =0A>=0A>
" target="_blank">http://www.matronics.com/Navigator?Pietenpol-List =0A
>tp://forums.matronics.com _blank">http://www.matronics.com/contribution
-========================
================== =0A=0A=0A=0A
Other Matronics Email List Services
These Email List Services are sponsored solely by Matronics and through the generous Contributions of its members.
-- Please support this service by making your Contribution today! --
|