---------------------------------------------------------- Pietenpol-List Digest Archive --- Total Messages Posted Sat 12/11/10: 15 ---------------------------------------------------------- Today's Message Index: ---------------------- 1. 07:44 AM - Fw: Oh Holy Night -Celtic Woman (Charles Campbell) 2. 09:50 AM - Re: Corvair Donation (Charles Campbell) 3. 10:05 AM - FW: Pietenpol Preamble (KM Heide CPO/FAAOP) 4. 10:27 AM - Push-pull control rod (KM Heide CPO/FAAOP) 5. 11:05 AM - Re: Push-pull control rod (Gary Boothe) 6. 12:05 PM - Re: FW: Pietenpol Preamble (Kimball Isaac) 7. 04:11 PM - Re: Push-pull control rod (Peter W Johnson) 8. 05:47 PM - Re: Corvair Donation (echobravo4) 9. 06:26 PM - Re: Push-pull control rod (Greg Cardinal) 10. 07:13 PM - Re: Re: Corvair Donation (Clif Dawson) 11. 07:39 PM - Re: FW: Pietenpol Preamble (Clif Dawson) 12. 07:46 PM - Re: FW: Pietenpol Preamble (Kimball Isaac) 13. 07:58 PM - Re: FW: Pietenpol Preamble (Jim Markle) 14. 09:10 PM - Re: FW: Pietenpol Preamble (amsafetyc@aol.com) 15. 10:47 PM - Re: FW: Pietenpol Preamble (Clif Dawson) ________________________________ Message 1 _____________________________________ Time: 07:44:17 AM PST US From: "Charles Campbell" Subject: Pietenpol-List: Fw: Oh Holy Night -Celtic Woman FW: Oh Holy Night -Celtic WomanIf this doesn't get you in the REAL CHRISTmas spirit -- nothing will. MERRY CHRISTMAS everyone. Hope your's is as wonderful as the Lord can make it!!! Chuck Subject: Oh Holy Night -Celtic Woman Celtic Woman live from the Helix Center in Dublin, Ireland performing A Christmas Celebration. THIS IS JUST BEAUTIFUL!!!! Http://www.youtube.com/watch?v=sDeXUvWbLp8 Click here =EF=BB =EF=BB =EF=BB =EF=BB ------------------------------------------------------------------------- ------- Checked by AVG - www.avg.com 07:34:00 ------ End of Forwarded Message ________________________________ Message 2 _____________________________________ Time: 09:50:23 AM PST US From: "Charles Campbell" Subject: Re: Pietenpol-List: Corvair Donation Dave, if you can't find a kid under 21 how about an old man over 85? I'll take it in a heart beat! ----- Original Message ----- From: "Dangerous Dave" Sent: Thursday, December 09, 2010 7:17 PM Subject: Pietenpol-List: Corvair Donation > > Howdy,I have a corvair engine stripped down and bead blasted.All correct > numbers and in good shape.I will donate it to a worthy kid building a > Piet.It has not been built.Its Corvair parts to build it.William Wynne > book never registered in mint condition.I will crate it up on my dime if > you'll pay for it to be shipped.Know a worthy Kid? Must be a youngster > under 21! > Dave > > -------- > Covering Piet > > > Read this topic online here: > > http://forums.matronics.com/viewtopic.php?p=322789#322789 > > > ________________________________ Message 3 _____________________________________ Time: 10:05:34 AM PST US From: KM Heide CPO/FAAOP Subject: Pietenpol-List: FW: Pietenpol Preamble > > Members: > > Here is the Pietenpol > Preamble for your garage wall! Thanks to Mike Cuy for his > Wisdom, insights, and garage logic! > > > Ken Heide > Hawley, MN > > > - - - - - - =0A=0A=0A ________________________________ Message 4 _____________________________________ Time: 10:27:03 AM PST US From: KM Heide CPO/FAAOP Subject: Pietenpol-List: Push-pull control rod Fellow pieters: - Any members have photos thay can share on the push-pull rods. I am looking for control stick connections, behind the seat set-up and bell crank connec tion. Any assistance in the size, material, and-parts used for this set-u p is much appreicated. - KMHeide Hawley, MN- - =0A=0A=0A ________________________________ Message 5 _____________________________________ Time: 11:05:37 AM PST US From: "Gary Boothe" Subject: RE: Pietenpol-List: Push-pull control rod KM, These 3 may show mine the best. Let me know what questions may arise. Gary Boothe Cool, Ca. Pietenpol WW Corvair Conversion, Running! Tail done, Fuselage on gear (23 ribs down.) _____ From: owner-pietenpol-list-server@matronics.com [mailto:owner-pietenpol-list-server@matronics.com] On Behalf Of KM Heide CPO/FAAOP Sent: Saturday, December 11, 2010 10:25 AM Subject: Pietenpol-List: Push-pull control rod Fellow pieters: Any members have photos thay can share on the push-pull rods. I am looking for control stick connections, behind the seat set-up and bell crank connection. Any assistance in the size, material, and parts used for this set-up is much appreicated. KMHeide Hawley, MN ________________________________ Message 6 _____________________________________ Time: 12:05:00 PM PST US Subject: Re: Pietenpol-List: FW: Pietenpol Preamble From: Kimball Isaac I feel honoured that I was the first to receive Mike's very well worded "Wisdom,insight, and garage logic" in reply to my introduction. I have printed this to have it handy for reference and when I need encouragement. Thanks again Mike, and also thanks to Ken for putting it together in a nice formatting for printing and sharing. On 2010-12-11 10:09 AM, "KM Heide CPO/FAAOP" wrote: > > >> > >> > Members: >> > >> > Here is the Pietenpol >> > Preamble for your garage wall! Thanks to Mike Cuy for his >> > Wisdom, insights, and garage logic! >> > >> > >> > Ken Heide >> > Hawley, MN >> > >> > >> > >> >> >> > > ________________________________ Message 7 _____________________________________ Time: 04:11:34 PM PST US From: "Peter W Johnson" Subject: RE: Pietenpol-List: Push-pull control rod I have some pictures on my web site of the control tubes etc. Have a look at http://www.cpc-world.com/main.php?insert_file=photos103.php. The only thing I did notice was that the rod ends on the tube under the rear seat did not allow full stick side by side movement with out undoing the rod end a fraction of a turn. There were plenty of threads left and there was no way it was going to fall out so I left it as is. Not problems in use. I think I used 1/2 inch tubing if I remember correctly. Cheers Peter Wonthaggi Australia http://www.cpc-world.com From: owner-pietenpol-list-server@matronics.com [mailto:owner-pietenpol-list-server@matronics.com] On Behalf Of KM Heide CPO/FAAOP Sent: Sunday, 12 December 2010 5:25 AM Subject: Pietenpol-List: Push-pull control rod Fellow pieters: Any members have photos thay can share on the push-pull rods. I am looking for control stick connections, behind the seat set-up and bell crank connection. Any assistance in the size, material, and parts used for this set-up is much appreicated. KMHeide Hawley, MN ________________________________ Message 8 _____________________________________ Time: 05:47:58 PM PST US Subject: Pietenpol-List: Re: Corvair Donation From: "echobravo4" Mmmm- seems like I remember reading of someone fitting that description around here somewhere Do not archive -------- Earl Brown I may not have gone where I intended to go, but I think I have ended up where I intended to be. Read this topic online here: http://forums.matronics.com/viewtopic.php?p=323001#323001 ________________________________ Message 9 _____________________________________ Time: 06:26:32 PM PST US From: "Greg Cardinal" Subject: Re: Pietenpol-List: Push-pull control rod Ken. 1/2" .035 tubing will be sufficient. Use quality rod-end bearings. Keep the control movement ratio the same as the plans. On NX18235 we constructed the pivot point aft of the seat to resist lateral movment. Sorry, no pictures. Greg C. Digging out from 20" of fresh snow in Minneapolis. ----- Original Message ----- From: KM Heide CPO/FAAOP To: Pietenpol Sent: Saturday, December 11, 2010 12:24 PM Subject: Pietenpol-List: Push-pull control rod Fellow pieters: Any members have photos thay can share on the push-pull rods. I am looking for control stick connections, behind the seat set-up and bell crank connection. Any assistance in the size, material, and parts used for this set-up is much appreicated. KMHeide Hawley, MN ________________________________ Message 10 ____________________________________ Time: 07:13:36 PM PST US From: "Clif Dawson" Subject: Re: Pietenpol-List: Re: Corvair Donation All I know is that it's awfully difficult being fourteen in a sixty seven year old body! Clif "Adults are always asking little kids what they want to be when they grow up 'cause they're looking for ideas." - Paula Poundstone Do not archive > > Mmmm- seems like I remember reading of someone > fitting that description around here somewhere > > Do not archive > > -------- > Earl Brown ________________________________ Message 11 ____________________________________ Time: 07:39:55 PM PST US From: "Clif Dawson" Subject: Re: Pietenpol-List: FW: Pietenpol Preamble My computer tells me it can't open this thing. Clif > Here is the Pietenpol > Preamble for your garage wall! Thanks to Mike Cuy for his > Wisdom, insights, and garage logic! > Ken Heide > Hawley, MN ________________________________ Message 12 ____________________________________ Time: 07:46:16 PM PST US Subject: Re: Pietenpol-List: FW: Pietenpol Preamble From: Kimball Isaac Cliff I opened it with Microsoft word Kim On 2010-12-11 7:42 PM, "Clif Dawson" wrote: > My computer tells me it can't open this thing. > > Clif > > > > Here is the Pietenpol > > Preamble for your garage wall! Thanks to Mike Cuy for his > > Wisdom, insights, and garage logic! > > Ken Heide > > Hawley, MN > > ________________________________ Message 13 ____________________________________ Time: 07:58:59 PM PST US From: Jim Markle Subject: Re: Pietenpol-List: FW: Pietenpol Preamble Try this one.... -----Original Message----- From: Clif Dawson Sent: Dec 11, 2010 9:37 PM Subject: Re: Pietenpol-List: FW: Pietenpol Preamble My computer tells me it can't open this thing. Clif > Here is the Pietenpol > Preamble for your garage wall! Thanks to Mike Cuy for his > Wisdom, insights, and garage logic! > Ken Heide > Hawley, MN ________________________________ Message 14 ____________________________________ Time: 09:10:53 PM PST US From: "amsafetyc@aol.com" Subject: Re: Pietenpol-List: FW: Pietenpol Preamble Certainly worthy of printing.sharing and posting in our shops it captures the essence of who and what we are. John Sent via DROID on Verizon Wireless -----Original message----- From: Jim Markle Sent: Sun, Dec 12, 2010 03:59:31 GMT+00:00 Subject: Re: Pietenpol-List: FW: Pietenpol Preamble Try this one.... -----Original Message----- From: Clif Dawson Sent: Dec 11, 2010 9:37 PM Subject: Re: Pietenpol-List: FW: Pietenpol Preamble My computer tells me it can't open this thing. Clif > Here is the Pietenpol > Preamble for your garage wall! Thanks to Mike Cuy for his > Wisdom, insights, and garage logic! > Ken Heide > Hawley, MN ________________________________ Message 15 ____________________________________ Time: 10:47:21 PM PST US From: "Clif Dawson" Subject: Re: Pietenpol-List: FW: Pietenpol Preamble Thanks Jim. ----- Original Message ----- From: "Jim Markle" Sent: Saturday, December 11, 2010 7:55 PM Subject: Re: Pietenpol-List: FW: Pietenpol Preamble > Try this one.... > > -----Original Message----- > > From: Clif Dawson > > Sent: Dec 11, 2010 9:37 PM > > To: pietenpol-list@matronics.com > > Subject: Re: Pietenpol-List: FW: Pietenpol Preamble > > > > > > > > > > > My computer tells me it can't open this > thing. > > Clif > > > > > > > > > > > Here is the Pietenpol >> Preamble for > your garage wall! Thanks to Mike Cuy for his >> Wisdom, insights, > and garage logic! >> Ken Heide >> Hawley, > MN > > > > > > > > ------------------------------------------------------------------------------------- Other Matronics Email List Services ------------------------------------------------------------------------------------- Post A New Message pietenpol-list@matronics.com UN/SUBSCRIBE http://www.matronics.com/subscription List FAQ http://www.matronics.com/FAQ/Pietenpol-List.htm Web Forum Interface To Lists http://forums.matronics.com Matronics List Wiki http://wiki.matronics.com Full Archive Search Engine http://www.matronics.com/search 7-Day List Browse http://www.matronics.com/browse/pietenpol-list Browse Digests http://www.matronics.com/digest/pietenpol-list Browse Other Lists http://www.matronics.com/browse Live Online Chat! http://www.matronics.com/chat Archive Downloading http://www.matronics.com/archives Photo Share http://www.matronics.com/photoshare Other Email Lists http://www.matronics.com/emaillists Contributions http://www.matronics.com/contribution ------------------------------------------------------------------------------------- These Email List Services are sponsored solely by Matronics and through the generous Contributions of its members.