---------------------------------------------------------- Pietenpol-List Digest Archive --- Total Messages Posted Tue 02/15/11: 22 ---------------------------------------------------------- Today's Message Index: ---------------------- 1. 02:37 AM - Re: B&B turnbuckles (bubbleboy) 2. 05:27 AM - 3/8" 4130 Rod (Michael Perez) 3. 06:09 AM - Re: 3/8" 4130 Rod (Jim Markle) 4. 07:10 AM - For Matt Vandervort (shad bell) 5. 08:13 AM - Re: B&B turnbuckles (bender) 6. 10:12 AM - Re: 3/8" 4130 Rod (Charles Campbell) 7. 10:13 AM - Re: Re: B&B turnbuckles (Jack) 8. 11:33 AM - Re: Making airplane sounds... (DOMIT) 9. 11:44 AM - Re: 3/8" 4130 Rod (Jerry Dotson) 10. 11:57 AM - Re: Re: B&B turnbuckles (Jack) 11. 11:57 AM - hangar in Mulberry, Florida (off-topic) (Oscar Zuniga) 12. 12:05 PM - Re: 3/8" 4130 Rod (Michael Perez) 13. 12:28 PM - Re: Making airplane sounds... (aerocarjake) 14. 01:17 PM - Re: 3/8" 4130 Rod (Ryan Mueller) 15. 02:03 PM - Re: 3/8" 4130 Rod (Jim Markle) 16. 02:24 PM - rod's with wall thickness (Cuy, Michael D. (GRC-RXD0)[ASRC AEROSPACE CORP]) 17. 04:37 PM - Re: 3/8" 4130 Rod (Michael Perez) 18. 04:37 PM - Re: 3/8" 4130 Rod (Michael Perez) 19. 06:44 PM - Rotax powered Pietenpol in UK (Bill Church) 20. 07:36 PM - Re: For Matt Vandervort (Dennis Engelkenjohn) 21. 07:51 PM - Re: For Matt Vandervort (shad bell) 22. 11:51 PM - Re: B&B turnbuckles (bubbleboy) ________________________________ Message 1 _____________________________________ Time: 02:37:11 AM PST US Subject: Pietenpol-List: Re: B&B turnbuckles From: "bubbleboy" Hi Jack and Jeff...thank you both. What sizes are we looking for and are they aircraft specific? im not in front of my plans right now to look them up. Jeff are you able to give me their email? Regards Scotty -------- Scotty Tamworth, Australia Building a Corvair Powered Pietenpol Air Camper www.scottyspietenpol.com Read this topic online here: http://forums.matronics.com/viewtopic.php?p=331115#331115 ________________________________ Message 2 _____________________________________ Time: 05:27:51 AM PST US From: Michael Perez Subject: Pietenpol-List: 3/8" 4130 Rod I am in need of about 9" of- 3/8" .065 wall 4130 rod. If anyone has a scr ap piece that they wouldn't mind parting with, I would appreciate it. I'll cover shipping. Perhaps a trade for something I may have that you need? I would just buy my own, but I do not see a need to place any type order an ytime soon and this piece will hold up progress some if I don't have it. Michael Perez =0AKaretaker Aero =0Awww.karetakeraero.com ________________________________ Message 3 _____________________________________ Time: 06:09:34 AM PST US From: Jim Markle Subject: Re: Pietenpol-List: 3/8" 4130 Rod I think I have a piece that size. If so, it's yours. I'll check later today when I'm out in the workshop unless someone else comes up with it first. Jim -----Original Message----- From: Michael Perez Sent: Feb 15, 2011 7:22 AM Subject: Pietenpol-List: 3/8" 4130 Rod I am in need of about 9" of 3/8" .065 wall 4130 rod. If anyone has a scrap piece that they wouldn't mind parting with, I would appreciate it. I'll cover shipping. Perhaps a trade for something I may have that you need? I would just buy my own, but I do not see a need to place any type order anytime soon and this piece will hold up progress some if I don't have it. Michael Perez Karetaker Aero www.karetakeraero.com ________________________________ Message 4 _____________________________________ Time: 07:10:32 AM PST US From: shad bell Subject: Pietenpol-List: For Matt Vandervort Matt, Dad still has a brand new "Pietenpol" style corvair cowling (for blow er fan engine) that he bought up at Brodhead years ago, if you are in need, he would probably sell it pretty reasonable.- I think he paid $200 for i t, but he would take considerably less for it.- If interested let me know , or anyone else in need of a blower fan cowl. - Shad=0A=0A=0A =0A__________________________________________________________ __________________________=0AIt's here! Your new message! =0AGet new email ar/features/mail/ ________________________________ Message 5 _____________________________________ Time: 08:13:23 AM PST US Subject: Pietenpol-List: Re: B&B turnbuckles From: "bender" http://www.bbaircraftsupplies.com/ jbrull@bandbaircraftsupplies.com jeff Read this topic online here: http://forums.matronics.com/viewtopic.php?p=331132#331132 ________________________________ Message 6 _____________________________________ Time: 10:12:12 AM PST US From: "Charles Campbell" Subject: Re: Pietenpol-List: 3/8" 4130 Rod Do you mean rod or tubing? The .065 wall would indicate tubing. I'm getting ready to order some hardware from AS & S and could order you a foot. Chuck ----- Original Message ----- From: Michael Perez To: pietenpol-list@matronics.com Sent: Tuesday, February 15, 2011 8:22 AM Subject: Pietenpol-List: 3/8" 4130 Rod I am in need of about 9" of 3/8" .065 wall 4130 rod. If anyone has a scrap piece that they wouldn't mind parting with, I would appreciate it. I'll cover shipping. Perhaps a trade for something I may have that you need? I would just buy my own, but I do not see a need to place any type order anytime soon and this piece will hold up progress some if I don't have it. Michael Perez Karetaker Aero www.karetakeraero.com ________________________________ Message 7 _____________________________________ Time: 10:13:56 AM PST US From: "Jack" Subject: RE: Pietenpol-List: Re: B&B turnbuckles They finally got online, primitive but better than nothing. They are truly great people! Jack DSM -----Original Message----- From: owner-pietenpol-list-server@matronics.com [mailto:owner-pietenpol-list-server@matronics.com] On Behalf Of bender Sent: Tuesday, February 15, 2011 10:11 AM Subject: Pietenpol-List: Re: B&B turnbuckles http://www.bbaircraftsupplies.com/ jbrull@bandbaircraftsupplies.com jeff Read this topic online here: http://forums.matronics.com/viewtopic.php?p=331132#331132 ________________________________ Message 8 _____________________________________ Time: 11:33:18 AM PST US Subject: Pietenpol-List: Re: Making airplane sounds... From: "DOMIT" Those wicker seats are great... where did you find those? -------- Brad "DOMIT" Smith First rule of ground school: This is the ground... don't hit it going fast. Read this topic online here: http://forums.matronics.com/viewtopic.php?p=331141#331141 ________________________________ Message 9 _____________________________________ Time: 11:44:36 AM PST US Subject: Pietenpol-List: Re: 3/8" 4130 Rod From: "Jerry Dotson" I have the 3/8 4130 rod but not the tube. I would gladly send you some. -------- Jerry Dotson 59 Daniel Johnson Rd Baker, FL 32531 Started building NX510JD July, 2009 wing, tailfeathers done, fuselage rolling using Lycoming O-235 Read this topic online here: http://forums.matronics.com/viewtopic.php?p=331142#331142 ________________________________ Message 10 ____________________________________ Time: 11:57:02 AM PST US From: "Jack" Subject: RE: Pietenpol-List: Re: B&B turnbuckles Scotty, sorry I don't have a list, I'm not that far along. I just purchased various sizes on eBay as they became available at a good price. What you need will really depend on your ship and where you want to utilize them. I would guess there are no two alike in the fleet. Jack DSM -----Original Message----- From: owner-pietenpol-list-server@matronics.com [mailto:owner-pietenpol-list-server@matronics.com] On Behalf Of bubbleboy Sent: Tuesday, February 15, 2011 4:33 AM Subject: Pietenpol-List: Re: B&B turnbuckles Hi Jack and Jeff...thank you both. What sizes are we looking for and are they aircraft specific? im not in front of my plans right now to look them up. Jeff are you able to give me their email? Regards Scotty -------- Scotty Tamworth, Australia Building a Corvair Powered Pietenpol Air Camper www.scottyspietenpol.com Read this topic online here: http://forums.matronics.com/viewtopic.php?p=331115#331115 ________________________________ Message 11 ____________________________________ Time: 11:57:53 AM PST US From: Oscar Zuniga Subject: Pietenpol-List: hangar in Mulberry, Florida (off-topic) Howdy=3B still trying to help locate a Fairchild that is somewhere in a han gar near Mulberry=2C Florida (close to Lakeland). The hangar is owned by a Clarence Smith and I have more info on it. Anyone out there living near M ulberry or familiar with Mr. Smith (he owns a Taylorcraft) please contact m e off-list=3B thanks. Oscar Zuniga Air Camper NX41CC "Scout" San Antonio=2C TX website at http://www.flysquirrel.net ________________________________ Message 12 ____________________________________ Time: 12:05:50 PM PST US From: Michael Perez Subject: Re: Pietenpol-List: 3/8" 4130 Rod Thank you sir! Let me know what you find and I'll send you a mailing address. Michael Perez Karetaker Aero www.karetakeraero.com ________________________________ Message 13 ____________________________________ Time: 12:28:07 PM PST US Subject: Pietenpol-List: Re: Making airplane sounds... From: "aerocarjake" I built them from scratch out of 4130 steel - and then had a local business weave them... see this video of them "in work".... http://www.youtube.com/watch?v=jVhAE2lYCS8 -------- Jake Schultz - curator, Newport Way Air Museum (OK, it's just my home) Read this topic online here: http://forums.matronics.com/viewtopic.php?p=331152#331152 ________________________________ Message 14 ____________________________________ Time: 01:17:19 PM PST US Subject: Re: Pietenpol-List: 3/8" 4130 Rod From: Ryan Mueller Hi Chuck.....do you know of any 4130 rod with a wall thickness? :) do not archive On Tue, Feb 15, 2011 at 11:49 AM, Charles Campbell < cncampbell@windstream.net> wrote: > Do you mean rod or tubing? The .065 wall would indicate tubing. I'm > getting ready to order some hardware from AS & S and could order you a > foot. Chuck > > ----- Original Message ----- > *From:* Michael Perez > *To:* pietenpol-list@matronics.com > *Sent:* Tuesday, February 15, 2011 8:22 AM > *Subject:* Pietenpol-List: 3/8" 4130 Rod > > I am in need of about 9" of 3/8" .065 wall 4130 rod. If anyone has a > scrap piece that they wouldn't mind parting with, I would appreciate it. > I'll cover shipping. Perhaps a trade for something I may have that you need? > > I would just buy my own, but I do not see a need to place any type order > anytime soon and this piece will hold up progress some if I don't have it. > > Michael Perez > Karetaker Aero > www.karetakeraero.com > > * > > href="http://www.matronics.com/Navigator?Pietenpol-List">http://www.matronics.com/Navigator?Pietenpol-List > href="http://forums.matronics.com">http://forums.matronics.com > href="http://www.matronics.com/contribution">http://www.matronics.com/c* > > * > > * > > ________________________________ Message 15 ____________________________________ Time: 02:03:49 PM PST US From: Jim Markle Subject: Re: Pietenpol-List: 3/8" 4130 Rod All I could find was some 5/8".....I do have one more stash I can dig through that might help us out..... I'll let you know. jm -----Original Message----- From: Michael Perez Sent: Feb 15, 2011 12:19 PM Subject: Re: Pietenpol-List: 3/8" 4130 Rod Thank you sir! Let me know what you find and I'll send you a mailing address. Michael Perez Karetaker Aero www.karetakeraero.com ________________________________ Message 16 ____________________________________ Time: 02:24:35 PM PST US From: "Cuy, Michael D. (GRC-RXD0)[ASRC AEROSPACE CORP]" Subject: Pietenpol-List: rod's with wall thickness That's funny Ryan-I was thinking the same thing ! I haven't found any rod in the aircraft catalogs yet that showed a rod thic kness. I guess when you say wall thickness it explicitly implies that you're looking for tubing. Mike C. not in Stow OH do not archive Now where is my left-handed metric Crescent wrench anyway ? ________________________________ Message 17 ____________________________________ Time: 04:37:17 PM PST US From: Michael Perez Subject: Re: Pietenpol-List: 3/8" 4130 Rod Yes, tubing...hence the wall thickness as you pointed out. Don't worry about buying any for me, but thanks for the offer! Michael Perez Karetaker Aero www.karetakeraero.com ________________________________ Message 18 ____________________________________ Time: 04:37:17 PM PST US From: Michael Perez Subject: Re: Pietenpol-List: 3/8" 4130 Rod Thanks Jim. If not, I'll have to move on to plan "B" until I need to place an order for other items. Michael Perez Karetaker Aero www.karetakeraero.com ________________________________ Message 19 ____________________________________ Time: 06:44:21 PM PST US Subject: Pietenpol-List: Rotax powered Pietenpol in UK From: "Bill Church" Just saw on the UK Pietenpol Club's website that a Pietenpol has been successfully fitted with a 100 HP Rotax engine. The plane, G-BYFT was originally powered by a Subaru engine, but the owner wasn't satisfied with the performance. According to the article describing the conversion, he considered switching to a C-90 or O-200, but the cost was prohibitive. Apparently the cost of a new Rotax 912S in the UK is comparable to the cost of a rebuilt O-200, and considerably cheaper than a new O-200. Different story on this side of the pond, I think, since a new Rotax runs about $20,000, which could probably buy you a couple of low time O-200s, or almost buy a brand new O-200 Lightweight (List price $21,500). Personally, I'm not crazy about the sound of high revving engines on Pietenpols, but thought this might be of interest to some. Here's the link to the UK Pietenpol Club website. The article can be found there. http://www.pietenpolclub.co.uk/# Bill C. Read this topic online here: http://forums.matronics.com/viewtopic.php?p=331188#331188 ________________________________ Message 20 ____________________________________ Time: 07:36:26 PM PST US From: "Dennis Engelkenjohn" Subject: Re: Pietenpol-List: For Matt Vandervort What is the length of the cowl? I am interested. Dennis ----- Original Message ----- From: shad bell To: pietenpol-list@matronics.com Sent: Tuesday, February 15, 2011 9:01 AM Subject: Pietenpol-List: For Matt Vandervort Matt, Dad still has a brand new "Pietenpol" style corvair cowling (for blower fan engine) that he bought up at Brodhead years ago, if you are in need, he would probably sell it pretty reasonable. I think he paid $200 for it, but he would take considerably less for it. If interested let me know, or anyone else in need of a blower fan cowl. Shad ------------------------------------------------------------------------- ----- Get your own web address. Have a HUGE year through =========== ________________________________ Message 21 ____________________________________ Time: 07:51:51 PM PST US From: shad bell Subject: Re: Pietenpol-List: For Matt Vandervort I will have to call dad and have him measure it, I will see if he can send me a picture so I can post it.- We plan on being at Brodhead this year so if you're there we can bring it up, it would save a bunch of shipping. Shad=0A=0A=0A ________________________________ Message 22 ____________________________________ Time: 11:51:43 PM PST US Subject: Pietenpol-List: Re: B&B turnbuckles From: "bubbleboy" Cool! They have a website which now says they will post international so im set! Thanks for offering to help me out with postage to Australia Jack! Scotty -------- Scotty Tamworth, Australia Building a Corvair Powered Pietenpol Air Camper www.scottyspietenpol.com Read this topic online here: http://forums.matronics.com/viewtopic.php?p=331198#331198 ------------------------------------------------------------------------------------- Other Matronics Email List Services ------------------------------------------------------------------------------------- Post A New Message pietenpol-list@matronics.com UN/SUBSCRIBE http://www.matronics.com/subscription List FAQ http://www.matronics.com/FAQ/Pietenpol-List.htm Web Forum Interface To Lists http://forums.matronics.com Matronics List Wiki http://wiki.matronics.com Full Archive Search Engine http://www.matronics.com/search 7-Day List Browse http://www.matronics.com/browse/pietenpol-list Browse Digests http://www.matronics.com/digest/pietenpol-list Browse Other Lists http://www.matronics.com/browse Live Online Chat! http://www.matronics.com/chat Archive Downloading http://www.matronics.com/archives Photo Share http://www.matronics.com/photoshare Other Email Lists http://www.matronics.com/emaillists Contributions http://www.matronics.com/contribution ------------------------------------------------------------------------------------- These Email List Services are sponsored solely by Matronics and through the generous Contributions of its members.