Today's Message Index:
----------------------
1. 12:51 AM - Re: Yaawwn.....new thread needed- Did you ever think........... (Rod Wooller)
2. 04:28 AM - Re: Yaawwn.....new thread needed- Did you ever think........... (helspersew@aol.com)
3. 06:53 AM - Re: Yaawwn.....new thread needed- Did you ever think........... (Gene Rambo)
4. 08:34 AM - Re: West Coast Pietenpol Gathering (info sheet) (regchief)
5. 09:50 AM - Re: Rounded Seat for Delrin Needle, Stromberg Carb, Conti... (Piet2112)
6. 10:28 AM - WAAAM, etc. (Lawrence Williams)
7. 10:29 AM - Re: Yaawwn.....new thread needed- Did you ever think........... (helspersew@aol.com)
8. 12:09 PM - Re: Visit to John McPherson (taildrags)
9. 12:09 PM - Re: Visit to John McPherson (taildrags)
10. 12:16 PM - Re: Yaawwn.....new thread needed- Did you ever think........... (mike Hardaway)
11. 12:22 PM - Re: WAAAM, etc. (K5YAC)
12. 12:59 PM - Re: Progress (Jim Boyer)
13. 01:19 PM - Re: Re: Visit to John McPherson (Gary Boothe)
14. 02:02 PM - Airbox / Filter (Gary Boothe)
15. 02:14 PM - Re: Re: West Coast Pietenpol Gathering (info sheet) (Michael Groah)
16. 02:23 PM - Re: Visit to John McPherson (Don Emch)
17. 02:40 PM - Hey,pietenpol-list (rvjengel@aol.com)
18. 03:46 PM - Re: wings (womenfly2)
19. 04:09 PM - Re: Re: Visit to John McPherson (Gary Boothe)
20. 04:11 PM - Lancaster PA fly in for all you taildraggin Pieters (AMsafetyC@aol.com)
21. 04:55 PM - Re: Re: wings (Ryan Mueller)
22. 05:19 PM - Re: Re: wings (Charles Campbell)
23. 05:35 PM - Re: Progress (Charles Campbell)
24. 05:51 PM - Re: Airbox / Filter (Charles Campbell)
25. 06:03 PM - Re: Re: wings (Ryan Mueller)
26. 06:06 PM - SNF (Dick N)
27. 06:16 PM - Re: Lancaster PA fly in for all you taildraggin Pieters (echobravo4)
28. 06:28 PM - Re: Re: wings (norm)
29. 08:45 PM - Sun'n'Fun favor (TOM MICHELLE BRANT)
Message 1
INDEX | Back to Main INDEX |
NEXT | Skip to NEXT Message |
LIST | Reply to LIST Regarding this Message |
SENDER | Reply to SENDER Regarding this Message |
|
Subject: | Re: Yaawwn.....new thread needed- Did you ever think........... |
AS&S have self-locking castle nuts that let you sleep at night. MS17825
Message 2
INDEX | Back to Main INDEX |
PREVIOUS | Skip to PREVIOUS Message |
NEXT | Skip to NEXT Message |
LIST | Reply to LIST Regarding this Message |
SENDER | Reply to SENDER Regarding this Message |
|
Subject: | Re: Yaawwn.....new thread needed- Did you ever think........... |
How did I miss these? Never heard of them. My order is IN to ACS!!!!
Dan Helsper
Puryear, TN
-----Original Message-----
From: Rod Wooller <rmwo@CLEAR.NET.NZ>
Sent: Sun, Mar 27, 2011 2:51 am
Subject: Re: Pietenpol-List: Yaawwn.....new thread needed- Did you ever thi
nk...........
AS&S have self-locking castle nuts that let you sleep at night. MS17825
-= - The Pietenpol-List Email Forum -
-= Use the Matronics List Features Navigator to browse
-= the many List utilities such as List Un/Subscription,
-= Archive Search & Download, 7-Day Browse, Chat, FAQ,
-= Photoshare, and much much more:
-
-= --> http://www.matronics.com/Navigator?Pietenpol-List
-
-========================
-= - MATRONICS WEB FORUMS -
-= Same great content also available via the Web Forums!
-
-= --> http://forums.matronics.com
-
-========================
-= - List Contribution Web Site -
-= Thank you for your generous support!
-= -Matt Dralle, List Admin.
-= --> http://www.matronics.com/contribution
-========================
Message 3
INDEX | Back to Main INDEX |
PREVIOUS | Skip to PREVIOUS Message |
NEXT | Skip to NEXT Message |
LIST | Reply to LIST Regarding this Message |
SENDER | Reply to SENDER Regarding this Message |
|
Subject: | Yaawwn.....new thread needed- Did you ever think........... |
Do you=2C by any chance=2C wear suspenders AND a belt? :)
Gene
do not archive
> Date: Sun=2C 27 Mar 2011 20:49:07 +1300
> From: rmwo@clear.net.nz
> Subject: Re: Pietenpol-List: Yaawwn.....new thread needed- Did you ever t
hink...........
> To: pietenpol-list@matronics.com
>
>
> AS&S have self-locking castle nuts that let you sleep at night. MS17825
>
===========
===========
===========
===========
>
>
>
Message 4
INDEX | Back to Main INDEX |
PREVIOUS | Skip to PREVIOUS Message |
NEXT | Skip to NEXT Message |
LIST | Reply to LIST Regarding this Message |
SENDER | Reply to SENDER Regarding this Message |
|
Subject: | Re: West Coast Pietenpol Gathering (info sheet) |
although I can't open the download, I don't have word on this laptop, frazier lake
isn't that far from paso robles, so I will mark that date down on my calender.
BTW, Mike, I finally got to see a piet in the flesh last week. I stoped by
the Hiller aviation musuem, just south of San Fransisco, last week, and they
have a model A powered one, but it is sitting way up high and could only view
from a short distance. I would still like to come up and see yours some day,
particulary as your starting to cover.
Kelly
Read this topic online here:
http://forums.matronics.com/viewtopic.php?p=335169#335169
Message 5
INDEX | Back to Main INDEX |
PREVIOUS | Skip to PREVIOUS Message |
NEXT | Skip to NEXT Message |
LIST | Reply to LIST Regarding this Message |
SENDER | Reply to SENDER Regarding this Message |
|
Subject: | Re: Rounded Seat for Delrin Needle, Stromberg Carb, Conti... |
I was looking at the reassembly portion of the carb
overhaul manual, and it refers to shellacking. Does
anyone know of a modern alternative or if off the
shelf shellac from Lowes will work?
Dave, let me know when you hear from Mike if he
wants the seat or not. He might be stuck in the hangar
without a computer.
Curt Merdan
Flower Mound, TX
from the Stromberg overhaul manual:
REASSEMBLY: All headless screw plugs
below the fuel level should be assembled with
shellac, being careful not to get it on the end of
the plug where it will come off and be carried by
the fuel into one of the metering orifices. Head-
less screw plugs above the fuel level and all other
threaded parts screwed into the bodies should
have a compound of graphite and castor oil put
on the threads.
Read this topic online here:
http://forums.matronics.com/viewtopic.php?p=335181#335181
Message 6
INDEX | Back to Main INDEX |
PREVIOUS | Skip to PREVIOUS Message |
NEXT | Skip to NEXT Message |
LIST | Reply to LIST Regarding this Message |
SENDER | Reply to SENDER Regarding this Message |
|
With all this talk about resizing photos and reminiscing about the first
computer you owned, here's another suggestion......How about a lot more use of
"do not archive".
Larry the curmudgeon
Message 7
INDEX | Back to Main INDEX |
PREVIOUS | Skip to PREVIOUS Message |
NEXT | Skip to NEXT Message |
LIST | Reply to LIST Regarding this Message |
SENDER | Reply to SENDER Regarding this Message |
|
Subject: | Re: Yaawwn.....new thread needed- Did you ever think........... |
That's alright Gene........It's OK to try to get back at me.....I know you
are still sore about the paint-job thing, and then about the lawyer thing..
......
Dan Helsper
Puryear, TN
do not archive
-----Original Message-----
From: Gene Rambo <generambo@msn.com>
Sent: Sun, Mar 27, 2011 8:54 am
Subject: RE: Pietenpol-List: Yaawwn.....new thread needed- Did you ever thi
nk...........
Do you, by any chance, wear suspenders AND a belt? :)
Gene
do not archive
> Date: Sun, 27 Mar 2011 20:49:07 +1300
> From: rmwo@clear.net.nz
> Subject: Re: Pietenpol-List: Yaawwn.....new thread needed- Did you ever t
hink...........
> To: pietenpol-list@matronics.com
>
>
> AS&S have self-locking castle nuts that let you sleep at night. MS17825
>
========================
>
>
>
-= - The Pietenpol-List Email Forum -
-= Use the Matronics List Features Navigator to browse
-= the many List utilities such as List Un/Subscription,
-= Archive Search & Download, 7-Day Browse, Chat, FAQ,
-= Photoshare, and much much more:
-
-= --> http://www.matronics.com/Navigator?Pietenpol-List
-
-========================
-= - MATRONICS WEB FORUMS -
-= Same great content also available via the Web Forums!
-
-= --> http://forums.matronics.com
-
-========================
-= - List Contribution Web Site -
-= Thank you for your generous support!
-= -Matt Dralle, List Admin.
-= --> http://www.matronics.com/contribution
-========================
Message 8
INDEX | Back to Main INDEX |
PREVIOUS | Skip to PREVIOUS Message |
NEXT | Skip to NEXT Message |
LIST | Reply to LIST Regarding this Message |
SENDER | Reply to SENDER Regarding this Message |
|
Subject: | Re: Visit to John McPherson |
Those Eisemann mags are quite common among older planes. Parts are available.
Have John call Jeff Scott in Los Alamos, NM at (505) 412-0910 and I'm sure he
will be glad to help with information on servicing them.
--------
Oscar Zuniga
San Antonio, TX
Air Camper NX41CC
Read this topic online here:
http://forums.matronics.com/viewtopic.php?p=335187#335187
Message 9
INDEX | Back to Main INDEX |
PREVIOUS | Skip to PREVIOUS Message |
NEXT | Skip to NEXT Message |
LIST | Reply to LIST Regarding this Message |
SENDER | Reply to SENDER Regarding this Message |
|
Subject: | Re: Visit to John McPherson |
Those Eisemann mags are quite common among older planes. Parts are available.
Have John call Jeff Scott in Los Alamos, NM at (505) 412-0910 and I'm sure he
will be glad to help with information on servicing them.
--------
Oscar Zuniga
San Antonio, TX
Air Camper NX41CC
Read this topic online here:
http://forums.matronics.com/viewtopic.php?p=335186#335186
Message 10
INDEX | Back to Main INDEX |
PREVIOUS | Skip to PREVIOUS Message |
NEXT | Skip to NEXT Message |
LIST | Reply to LIST Regarding this Message |
SENDER | Reply to SENDER Regarding this Message |
|
Subject: | Re: Yaawwn.....new thread needed- Did you ever think........... |
Don't worry about that "lawyer thing," Dan. Most of us GDLs hate some if not
all other lawyers, and most especially when they work for insurance
companies.
Mike Hardaway
On Sun, Mar 27, 2011 at 9:20 AM, <helspersew@aol.com> wrote:
> That's alright Gene........It's OK to try to get back at me.....I know you
> are still sore about the paint-job thing, and then about the lawyer
> thing........
>
>
> Dan Helsper
> Puryear, TN
>
> do not archive
>
>
> [snip]
Message 11
INDEX | Back to Main INDEX |
PREVIOUS | Skip to PREVIOUS Message |
NEXT | Skip to NEXT Message |
LIST | Reply to LIST Regarding this Message |
SENDER | Reply to SENDER Regarding this Message |
|
Not gonna happen Mr. Curmedgeon.
--------
Mark Chouinard
Wings, Center Section and Empannage framed up - Working on Fuselage
Read this topic online here:
http://forums.matronics.com/viewtopic.php?p=335189#335189
Message 12
INDEX | Back to Main INDEX |
PREVIOUS | Skip to PREVIOUS Message |
NEXT | Skip to NEXT Message |
LIST | Reply to LIST Regarding this Message |
SENDER | Reply to SENDER Regarding this Message |
|
Hi Gary,
Thanks for the picture. I think I remember you saying you were using a Stro
mberg NAS-3A carburetor; so... what airbox/air filter are you using and whe
re did you get it?
Except for the wings you are ready to=C2- cover! Looking good Gary; are y
ou going to be ready for cover by June 4 and Frazier Lake?
I actually went=C2- out in the shop yesterday for a couple of hours and
=C2- cleaned=C2- out the accumulating junk so I can get out there and s
tart working again.=C2- Looking forward=C2- to=C2- it. The knee is ba
sically okay now,=C2- just not bending quite far enough yet,=C2- but ho
pefully it will.
Cheers,
Jim
Message 13
INDEX | Back to Main INDEX |
PREVIOUS | Skip to PREVIOUS Message |
NEXT | Skip to NEXT Message |
LIST | Reply to LIST Regarding this Message |
SENDER | Reply to SENDER Regarding this Message |
|
Subject: | Re: Visit to John McPherson |
Thanks, Oscar!!
do not archive
-----Original Message-----
From: taildrags
Sent: Sunday, March 27, 2011 11:48 AM
Subject: Pietenpol-List: Re: Visit to John McPherson
Those Eisemann mags are quite common among older planes. Parts are
available. Have John call Jeff Scott in Los Alamos, NM at (505) 412-0910
and I'm sure he will be glad to help with information on servicing them.
--------
Oscar Zuniga
San Antonio, TX
Air Camper NX41CC
Read this topic online here:
http://forums.matronics.com/viewtopic.php?p=335186#335186
Message 14
INDEX | Back to Main INDEX |
PREVIOUS | Skip to PREVIOUS Message |
NEXT | Skip to NEXT Message |
LIST | Reply to LIST Regarding this Message |
SENDER | Reply to SENDER Regarding this Message |
|
Jim,
Very glad to hear you are up and about! You gotta keep an eye on your
shop, or, before you know it, it=99ll be full of stuff that
belongs IN the house (if you know what I mean! ).
My air box I bought several years ago on E-bay, but it has no
distinguishing marks on it. I believe it was advertised to be a
=9C...cessna style...=9D air box. The filter is a Brackett
filter.
I just came in to get a cup of tea after painting all the fittings for
the wings! Only thing left to do before assembling them is to rib up
some trailing edges...I don=99t think I=99ll be covering
before the West Coast Pietenpol Gathering, but sure looking forward to
seeing all you guys!
Gary Boothe
Corvair Powered
From: Jim Boyer
Sent: Sunday, March 27, 2011 12:35 PM
Subject: Re: Pietenpol-List: Progress
Hi Gary,
Thanks for the picture. I think I remember you saying you were using a
Stromberg NAS-3A carburetor; so... what airbox/air filter are you using
and where did you get it?
Except for the wings you are ready to cover! Looking good Gary; are you
going to be ready for cover by June 4 and Frazier Lake?
I actually went out in the shop yesterday for a couple of hours and
cleaned out the accumulating junk so I can get out there and start
working again. Looking forward to it. The knee is basically okay now,
just not bending quite far enough yet, but hopefully it will.
Cheers,
Jim
3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=
3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=
3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=
3D
3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=
3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=
3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=
3D
3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=
3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=
3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=
3D
3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=
3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=
3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=
3D
Message 15
INDEX | Back to Main INDEX |
PREVIOUS | Skip to PREVIOUS Message |
NEXT | Skip to NEXT Message |
LIST | Reply to LIST Regarding this Message |
SENDER | Reply to SENDER Regarding this Message |
|
Subject: | Re: West Coast Pietenpol Gathering (info sheet) |
Kelly,
I look forward to seeing you at the gathering in June! Email me your address
off list and I'll send you the flyer.
And you're welcome to come see our project as is any other builder passing through
our part of the world.
Mike Groah
Tulare California
Sent from my iPhone
On Mar 27, 2011, at 8:12 AM, "regchief" <kbosley@comcast.net> wrote:
>
> although I can't open the download, I don't have word on this laptop, frazier
lake isn't that far from paso robles, so I will mark that date down on my calender.
BTW, Mike, I finally got to see a piet in the flesh last week. I stoped
by the Hiller aviation musuem, just south of San Fransisco, last week, and they
have a model A powered one, but it is sitting way up high and could only view
from a short distance. I would still like to come up and see yours some day,
particulary as your starting to cover.
>
> Kelly
>
>
>
>
> Read this topic online here:
>
> http://forums.matronics.com/viewtopic.php?p=335169#335169
>
>
>
>
>
>
>
>
>
>
Message 16
INDEX | Back to Main INDEX |
PREVIOUS | Skip to PREVIOUS Message |
NEXT | Skip to NEXT Message |
LIST | Reply to LIST Regarding this Message |
SENDER | Reply to SENDER Regarding this Message |
|
Subject: | Re: Visit to John McPherson |
Gary,
What kind of help is he looking for with the mags?
Don Emch
NX899DE
Read this topic online here:
http://forums.matronics.com/viewtopic.php?p=335198#335198
Message 17
INDEX | Back to Main INDEX |
PREVIOUS | Skip to PREVIOUS Message |
NEXT | Skip to NEXT Message |
LIST | Reply to LIST Regarding this Message |
SENDER | Reply to SENDER Regarding this Message |
|
Subject: | Hey,pietenpol-list |
Hello,friend!
I have bought several products on www.apple-33g.com a month ago.? I felt th
ey are pretty good after being used for a while, the most important is they
provide products at lower price and free delivery charges. So I strongly r
ecommend you to visit this website. Maybe you will find something you reall
y need.
Wishing you many future sucesses!
Message 18
INDEX | Back to Main INDEX |
PREVIOUS | Skip to PREVIOUS Message |
NEXT | Skip to NEXT Message |
LIST | Reply to LIST Regarding this Message |
SENDER | Reply to SENDER Regarding this Message |
|
Your wing spars really worry me. Seriously.
Read this topic online here:
http://forums.matronics.com/viewtopic.php?p=335203#335203
Message 19
INDEX | Back to Main INDEX |
PREVIOUS | Skip to PREVIOUS Message |
NEXT | Skip to NEXT Message |
LIST | Reply to LIST Regarding this Message |
SENDER | Reply to SENDER Regarding this Message |
|
Subject: | Re: Visit to John McPherson |
This may sound funny...but he (and we) could not find any evidence of a
P-lead!!
Gary
-----Original Message-----
From: owner-pietenpol-list-server@matronics.com
[mailto:owner-pietenpol-list-server@matronics.com] On Behalf Of Don Emch
Sent: Sunday, March 27, 2011 2:02 PM
Subject: Pietenpol-List: Re: Visit to John McPherson
Gary,
What kind of help is he looking for with the mags?
Don Emch
NX899DE
Read this topic online here:
http://forums.matronics.com/viewtopic.php?p=335198#335198
Message 20
INDEX | Back to Main INDEX |
PREVIOUS | Skip to PREVIOUS Message |
NEXT | Skip to NEXT Message |
LIST | Reply to LIST Regarding this Message |
SENDER | Reply to SENDER Regarding this Message |
|
Subject: | Lancaster PA fly in for all you taildraggin Pieters |
I should be well into my hangar by this time in case you're interested in
attending
the:
Event Name: 1st. Annual Amish Country Taildragger Fly-In Event
Location: Lancaster, PA Event Date: June 11, 2011 Contact Name: _Al Hubler_
(mailto:c177batcpilot@aol.com) Contact Phone: 717-468-8014 Additional
Comments:
All makes and models of taildraggers are welcome.
Shoo-Fly Pie, Chicken Corn Soup, Whoopie Pies, Homemade Root Beer. Fly
Mart (Bring your aviation items to sell) RSVP if possible. No Rain Date.
I live close by and expect to attend I am hoping the Pieters will show,
please let me know if youre interested in attending. If all goes well Ill
have a hangar for shelter and what ever else I can scrounge up to make the
trip a bit more comfortable
FYI its KLNS for those that are interested in finding it on the Baltimore
Washington sectional
Please advise on or off list just curious to see if any peters would be
interested in attending.
John
Message 21
INDEX | Back to Main INDEX |
PREVIOUS | Skip to PREVIOUS Message |
NEXT | Skip to NEXT Message |
LIST | Reply to LIST Regarding this Message |
SENDER | Reply to SENDER Regarding this Message |
|
Yeah....per the EAA Wood book, which is referencing approved data, the
minimum is 8 annual rings per inch....from what I can see in the pics you
aren't there....
Ryan
On Sun, Mar 27, 2011 at 5:25 PM, womenfly2 <keriannprice@hotmail.com> wrote:
> keriannprice@hotmail.com>
>
> Your wing spars really worry me. Seriously.
>
>
> Read this topic online here:
>
> http://forums.matronics.com/viewtopic.php?p=335203#335203
>
>
Message 22
INDEX | Back to Main INDEX |
PREVIOUS | Skip to PREVIOUS Message |
NEXT | Skip to NEXT Message |
LIST | Reply to LIST Regarding this Message |
SENDER | Reply to SENDER Regarding this Message |
|
Don't worry about it -- I don't.
----- Original Message -----
From: "womenfly2" <keriannprice@hotmail.com>
Sent: Sunday, March 27, 2011 6:25 PM
Subject: Pietenpol-List: Re: wings
> <keriannprice@hotmail.com>
>
> Your wing spars really worry me. Seriously.
>
>
> Read this topic online here:
>
> http://forums.matronics.com/viewtopic.php?p=335203#335203
>
>
>
Message 23
INDEX | Back to Main INDEX |
PREVIOUS | Skip to PREVIOUS Message |
NEXT | Skip to NEXT Message |
LIST | Reply to LIST Regarding this Message |
SENDER | Reply to SENDER Regarding this Message |
|
Jim, I'm assuming that you had a knee replaced. I had one replaced
about 3 years ago and the day after the surgery I got deathly ill. I
was flat on my back, unable to do any therapy exercises for about 9
weeks. I am paying the price now. I don't remember a day since the
surgery that my knee hasn't hurt. And it's more stiff than it should
be. Moral: do your therapy exercises regularly and strenously. It
will pay off in the long run. Chuck
----- Original Message -----
From: Jim Boyer
To: pietenpol-list@matronics.com
Sent: Sunday, March 27, 2011 3:35 PM
Subject: Re: Pietenpol-List: Progress
Hi Gary,
Thanks for the picture. I think I remember you saying you were using a
Stromberg NAS-3A carburetor; so... what airbox/air filter are you using
and where did you get it?
Except for the wings you are ready to cover! Looking good Gary; are
you going to be ready for cover by June 4 and Frazier Lake?
I actually went out in the shop yesterday for a couple of hours and
cleaned out the accumulating junk so I can get out there and start
working again. Looking forward to it. The knee is basically okay now,
just not bending quite far enough yet, but hopefully it will.
Cheers,
Jim
3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=
3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=
3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=
3D
3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=
3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=
3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=
3D
3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=
3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=
3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=
3D
3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=
3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=
3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=
3D
Message 24
INDEX | Back to Main INDEX |
PREVIOUS | Skip to PREVIOUS Message |
NEXT | Skip to NEXT Message |
LIST | Reply to LIST Regarding this Message |
SENDER | Reply to SENDER Regarding this Message |
|
Subject: | Re: Airbox / Filter |
Question! A lot of the time I receive the same post more than once.
This one from Gary I received twice. Today I received one of the posts
four times. Is this the fault of the list or is my server doing it?
----- Original Message -----
From: Gary Boothe
To: pietenpol-list@matronics.com
Sent: Sunday, March 27, 2011 4:25 PM
Subject: Pietenpol-List: Airbox / Filter
Jim,
Very glad to hear you are up and about! You gotta keep an eye on your
shop, or, before you know it, it=99ll be full of stuff that
belongs IN the house (if you know what I mean! ).
My air box I bought several years ago on E-bay, but it has no
distinguishing marks on it. I believe it was advertised to be a
=9C...cessna style...=9D air box. The filter is a Brackett
filter.
I just came in to get a cup of tea after painting all the fittings for
the wings! Only thing left to do before assembling them is to rib up
some trailing edges...I don=99t think I=99ll be covering
before the West Coast Pietenpol Gathering, but sure looking forward to
seeing all you guys!
Gary Boothe
Corvair Powered
From: Jim Boyer
Sent: Sunday, March 27, 2011 12:35 PM
To: pietenpol-list@matronics.com
Subject: Re: Pietenpol-List: Progress
Hi Gary,
Thanks for the picture. I think I remember you saying you were using a
Stromberg NAS-3A carburetor; so... what airbox/air filter are you using
and where did you get it?
Except for the wings you are ready to cover! Looking good Gary; are
you going to be ready for cover by June 4 and Frazier Lake?
I actually went out in the shop yesterday for a couple of hours and
cleaned out the accumulating junk so I can get out there and start
working again. Looking forward to it. The knee is basically okay now,
just not bending quite far enough yet, but hopefully it will.
Cheers,
Jim
3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=
3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=
3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=
3D
href='wlmailhtml:3D"http://www.matronics.com/Navigator?Pietenpol-List"'
>http://www.matronics.com/Navigator?Pietenpol-List
3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=
3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=
3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=
3D
href='wlmailhtml:3D"http://forums.matronics.com"'>http://forums.matroni
cs.com
3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=
3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=
3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=
3D
href='wlmailhtml:3D"http://www.matronics.com/contribution"'>http://www.
matronics.com/contribution
3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=
3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=
3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=
3D
Message 25
INDEX | Back to Main INDEX |
PREVIOUS | Skip to PREVIOUS Message |
NEXT | Skip to NEXT Message |
LIST | Reply to LIST Regarding this Message |
SENDER | Reply to SENDER Regarding this Message |
|
Excellent attitude...
On Sun, Mar 27, 2011 at 6:57 PM, Charles Campbell <cncampbell@windstream.net
> wrote:
> cncampbell@windstream.net>
>
> Don't worry about it -- I don't.
>
> ----- Original Message ----- From: "womenfly2" <keriannprice@hotmail.com>
> To: <pietenpol-list@matronics.com>
> Sent: Sunday, March 27, 2011 6:25 PM
> Subject: Pietenpol-List: Re: wings
>
>
>> keriannprice@hotmail.com>
>>
>> Your wing spars really worry me. Seriously.
>>
>>
>>
>>
>> Read this topic online here:
>>
>> http://forums.matronics.com/viewtopic.php?p=335203#335203
>>
>>
>>
>>
>>
>>
>>
>>
>>
>>
>>
>
>
Message 26
INDEX | Back to Main INDEX |
PREVIOUS | Skip to PREVIOUS Message |
NEXT | Skip to NEXT Message |
LIST | Reply to LIST Regarding this Message |
SENDER | Reply to SENDER Regarding this Message |
|
Hey all
I'm at SNF with Skip Gadd Dave Aldrich, Randy Henderson and a couple
others . There are 4 Piets here so far. We are going to be building a
Piet Fuselage at the show, I hope you all will stop by and watch or
help. This one is going to be a quick build, so come by early on.
I'll post a pic or 2 later.
Dick N.
Message 27
INDEX | Back to Main INDEX |
PREVIOUS | Skip to PREVIOUS Message |
NEXT | Skip to NEXT Message |
LIST | Reply to LIST Regarding this Message |
SENDER | Reply to SENDER Regarding this Message |
|
Subject: | Re: Lancaster PA fly in for all you taildraggin Pieters |
I'll in!
--------
Earl Brown
I may not have gone where I intended to go, but I think I have ended up where I
intended to be.
Read this topic online here:
http://forums.matronics.com/viewtopic.php?p=335211#335211
Message 28
INDEX | Back to Main INDEX |
PREVIOUS | Skip to PREVIOUS Message |
NEXT | Skip to NEXT Message |
LIST | Reply to LIST Regarding this Message |
SENDER | Reply to SENDER Regarding this Message |
|
I too think you should--get-some local help on selecting your spar qu
ality , =0Aperhaps an eaa chapter ,, or fellow builder or ?- It would be
a shame if your =0Adar fails it after all your hard work , please accept th
is as friendly criticism =0Aregards- norm=0A=0A=0A=0A____________________
____________=0AFrom: womenfly2 <keriannprice@hotmail.com>=0ATo: pietenpol-l
ist@matronics.com=0ASent: Sun, March 27, 2011 6:25:29 PM=0ASubject: Pietenp
keriannprice@hotmail.com>=0A=0AYour wing spars really worry me. Seriously.
=0A=0A=0A=0A=0ARead this topic online here:=0A=0Ahttp://forums.matronics.co
-========================
============0A=0A=0A
Message 29
INDEX | Back to Main INDEX |
PREVIOUS | Skip to PREVIOUS Message |
NEXT | Skip to NEXT Message |
LIST | Reply to LIST Regarding this Message |
SENDER | Reply to SENDER Regarding this Message |
|
Anyone still reading email that's attending Sun'n'fun=2C I could use a favo
r if you're willing.
I'm trying to get a bunch of turnbuckles from B&B but he's got everything a
t Sun'n'Fun. Wondering if anyone would be willing to get me some and promp
tly be reimbursed. Preferably someone from Minneapolis area - Dick Navratr
il perhaps???
Later=2C
Tom Brant
Other Matronics Email List Services
These Email List Services are sponsored solely by Matronics and through the generous Contributions of its members.
-- Please support this service by making your Contribution today! --
|