Today's Message Index:
----------------------
1. 04:03 AM - Re: Rudder Cable Routing (helspersew@aol.com)
2. 04:27 AM - Re: Rudder Cable Routing (Jerry Dotson)
3. 05:29 AM - Re: PHL May 2-6 (Bill Church)
4. 05:38 AM - latex bonding to fabric (Oscar Zuniga)
5. 05:43 AM - hangar visit (Oscar Zuniga)
6. 06:21 AM - Re: Re: PHL May 2-6 (Jim Markle)
7. 06:35 AM - Re: hangar visit (Ken Bickers)
8. 08:10 AM - Ohio Piet fly-in june 18 th (shad bell)
9. 02:50 PM - Re: latex bonding to fabric (Billy McCaskill)
10. 06:57 PM - Re: Ohio Piet fly-in june 18 th (skipgadd@earthlink.net)
11. 07:09 PM - Re: Re: PHL May 2-6 (Clif Dawson)
12. 08:04 PM - Re: Rudder Cable Routing (Clif Dawson)
13. 11:27 PM - Re: Ohio Piet fly-in june 18 th (shad bell)
Message 1
INDEX | Back to Main INDEX |
NEXT | Skip to NEXT Message |
LIST | Reply to LIST Regarding this Message |
SENDER | Reply to SENDER Regarding this Message |
|
Subject: | Re: Rudder Cable Routing |
Hi Jack,
I didn't think it was necessary to add the pulley. I took a small piece of
phenolic, drilled a hole in it, and glued it to the back side of the seat,
then ran the rudder cable through. There seems to be enough slack in that s
ystem for it to work fine on mine. Very smooth operation with no effort to
move the rudder.
Dan Helsper
Puryear, TN
-----Original Message-----
From: Jack <jack@textors.com>
Sent: Thu, Apr 21, 2011 7:37 pm
Subject: Pietenpol-List: Rudder Cable Routing
Would like some assistance with the routing of the rudder cables. I assume
they need to go through the back-seat front panel. Then do they go to a p
ulley? Any pictures or comments would help.
Thanks!
Jack
DSM
-= - The Pietenpol-List Email Forum -
-= Use the Matronics List Features Navigator to browse
-= the many List utilities such as List Un/Subscription,
-= Archive Search & Download, 7-Day Browse, Chat, FAQ,
-= Photoshare, and much much more:
-
-= --> http://www.matronics.com/Navigator?Pietenpol-List
-
-========================
-= - MATRONICS WEB FORUMS -
-= Same great content also available via the Web Forums!
-
-= --> http://forums.matronics.com
-
-========================
-= - List Contribution Web Site -
-= Thank you for your generous support!
-= -Matt Dralle, List Admin.
-= --> http://www.matronics.com/contribution
-========================
Message 2
INDEX | Back to Main INDEX |
PREVIOUS | Skip to PREVIOUS Message |
NEXT | Skip to NEXT Message |
LIST | Reply to LIST Regarding this Message |
SENDER | Reply to SENDER Regarding this Message |
|
Subject: | Re: Rudder Cable Routing |
I ran my rudder cable through red oak blocks and like Dan's I feel no resistance
from the setup. I just drilled a 1/4" hole in the block.
--------
Jerry Dotson
59 Daniel Johnson Rd
Baker, FL 32531
Started building NX510JD July, 2009
wing, tailfeathers done, fuselage rolling
using Lycoming O-235
Read this topic online here:
http://forums.matronics.com/viewtopic.php?p=338047#338047
Message 3
INDEX | Back to Main INDEX |
PREVIOUS | Skip to PREVIOUS Message |
NEXT | Skip to NEXT Message |
LIST | Reply to LIST Regarding this Message |
SENDER | Reply to SENDER Regarding this Message |
|
Jim,
You're not helping to dispel those nasty rumors about things disappearing when
you visit. The appropriate word is bring, not take. :)
Jim wrote:
> ... Be sure to take a camera...
>
Read this topic online here:
http://forums.matronics.com/viewtopic.php?p=338050#338050
Message 4
INDEX | Back to Main INDEX |
PREVIOUS | Skip to PREVIOUS Message |
NEXT | Skip to NEXT Message |
LIST | Reply to LIST Regarding this Message |
SENDER | Reply to SENDER Regarding this Message |
|
Subject: | latex bonding to fabric |
Holy smokes=2C Malcolm-! Your projects (the Titan and the Piet) look fabul
ous!
Very interesting details on how you did the finish and paint.
I'll refrain from mentioning your folding wing and V-struts lest the purist
s pounce on you =3Bo)
Oscar Zuniga
Air Camper NX41CC "Scout"
San Antonio=2C TX
website at http://www.flysquirrel.net
Message 5
INDEX | Back to Main INDEX |
PREVIOUS | Skip to PREVIOUS Message |
NEXT | Skip to NEXT Message |
LIST | Reply to LIST Regarding this Message |
SENDER | Reply to SENDER Regarding this Message |
|
As promised, Ken Bickers showed up at my hangar on Saturday afternoon
with his wife in tow. What nice folks-! Ken was able to look over my
Piet as well as visiting John's hangar and his Piet, so hopefully he
got another nudge to "keep on building". The wind was pretty blustery
for flying, so I didn't bother but it was OK because we got to talk
and ask/answer questions, compare notes.
Hangar visits sure can be fun, informative, and inspirational.
Hey Ken: in hindsight, I should have told you about Rudy's BBQ over on
Hwy. 1604. They have great BBQ and the place where I sent you, Stump's,
probably just had burgers and the like. Next time ;o)
Oscar Zuniga
Air Camper NX41CC "Scout"
San Antonio, TX
website at http://www.flysquirrel.net
Message 6
INDEX | Back to Main INDEX |
PREVIOUS | Skip to PREVIOUS Message |
NEXT | Skip to NEXT Message |
LIST | Reply to LIST Regarding this Message |
SENDER | Reply to SENDER Regarding this Message |
|
See? I told you I didn't even KNOW how I get myself in so much trouble!!!
Thanks Bill, I'll remember that....hahahahaha
-----Original Message-----
>From: Bill Church <billspiet@sympatico.ca>
>Sent: Apr 25, 2011 7:27 AM
>To: pietenpol-list@matronics.com
>Subject: Pietenpol-List: Re: PHL May 2-6
>
>
>Jim,
>You're not helping to dispel those nasty rumors about things disappearing when
you visit. The appropriate word is bring, not take. :)
>
>Jim wrote:
>
>> ... Be sure to take a camera...
>>
>
>
>Read this topic online here:
>
>http://forums.matronics.com/viewtopic.php?p=338050#338050
>
>
Message 7
INDEX | Back to Main INDEX |
PREVIOUS | Skip to PREVIOUS Message |
NEXT | Skip to NEXT Message |
LIST | Reply to LIST Regarding this Message |
SENDER | Reply to SENDER Regarding this Message |
|
Subject: | Re: hangar visit |
Oscar,
Laura and I enjoyed meeting you and John on Saturday. We commented
later that Pietenpol folks are always friendly and welcoming. And
every Pietenpol -- even when the plans have been followed meticulously
-- seems to exude individuality.
We actually drove on to Bandera for a visit and some BBQ. What a
place. Horses were tied up outside at least two of the bars. And the
BBQ. It would cure a vegetarian.
If anyone is coming through northern Colorado on the way to Estes
Park, be sure to drop a note. I'd be happy to open my hangar to show
my Pietenpol project.
Thanks again to both you and John for the hospitality.
Cheers, Ken
On Mon, Apr 25, 2011 at 6:41 AM, Oscar Zuniga <taildrags@hotmail.com> wrote:
>
>
> As promised, Ken Bickers showed up at my hangar on Saturday afternoon
> with his wife in tow. What nice folks-! Ken was able to look over my
> Piet as well as visiting John's hangar and his Piet, so hopefully he
> got another nudge to "keep on building". The wind was pretty blustery
> for flying, so I didn't bother but it was OK because we got to talk
> and ask/answer questions, compare notes.
>
> Hangar visits sure can be fun, informative, and inspirational.
>
> Hey Ken: in hindsight, I should have told you about Rudy's BBQ over on
> Hwy. 1604. They have great BBQ and the place where I sent you, Stump's,
> probably just had burgers and the like. Next time ;o)
>
> Oscar Zuniga
> Air Camper NX41CC "Scout"
> San Antonio, TX
> website at http://www.flysquirrel.net
>
>
Message 8
INDEX | Back to Main INDEX |
PREVIOUS | Skip to PREVIOUS Message |
NEXT | Skip to NEXT Message |
LIST | Reply to LIST Regarding this Message |
SENDER | Reply to SENDER Regarding this Message |
|
Subject: | Ohio Piet fly-in june 18 th |
Just trying to see if anyone is planning on attending our little pietenpol
fly-in here in Centerburg Ohio this june.- I will send out a few more rem
inders, but I need to get a rough head count so I can plan the food, drinks
.- We have a new identifier now it is no longer OH71, it is now 6CM, alth
ough it was OH0 for 2-3 weeks so it might still be that on a new sectional,
that is oscar-hotel-zero (the faa changed it because it is confusing to ha
ve an oscar and zero like that.)- So any of you Ohio area guys let me kno
w if you can make it, or if you can't.
-
Shad
Message 9
INDEX | Back to Main INDEX |
PREVIOUS | Skip to PREVIOUS Message |
NEXT | Skip to NEXT Message |
LIST | Reply to LIST Regarding this Message |
SENDER | Reply to SENDER Regarding this Message |
|
Subject: | Re: latex bonding to fabric |
Wow, who knew latex could look that nice? Beautiful work, Malcolm. This just
confirms my choice of using latex when I get to that stage on my project, perhaps
in the next decade or so...
And no, I have not picked out a color scheme for my Piet project yet in case anyone
was wondering. There are far more important things to worry about like building
ribs. [Wink]
do not archive
--------
Billy McCaskill
Urbana, IL
tail section almost done, starting on ribs soon
Read this topic online here:
http://forums.matronics.com/viewtopic.php?p=338100#338100
Message 10
INDEX | Back to Main INDEX |
PREVIOUS | Skip to PREVIOUS Message |
NEXT | Skip to NEXT Message |
LIST | Reply to LIST Regarding this Message |
SENDER | Reply to SENDER Regarding this Message |
|
Subject: | Ohio Piet fly-in june 18 th |
Shad, Ed and I are still planning on your fly in, weather permitting.
Skip
----- Original Message -----
From: shad bell
Sent: 4/25/2011 11:12:18 AM
Subject: Pietenpol-List: Ohio Piet fly-in june 18 th
Just trying to see if anyone is planning on attending our little pietenpol fly-in
here in Centerburg Ohio this june. I will send out a few more reminders, but
I need to get a rough head count so I can plan the food, drinks. We have a
new identifier now it is no longer OH71, it is now 6CM, although it was OH0 for
2-3 weeks so it might still be that on a new sectional, that is oscar-hotel-zero
(the faa changed it because it is confusing to have an oscar and zero like
that.) So any of you Ohio area guys let me know if you can make it, or if
you can't.
Shad
Message 11
INDEX | Back to Main INDEX |
PREVIOUS | Skip to PREVIOUS Message |
NEXT | Skip to NEXT Message |
LIST | Reply to LIST Regarding this Message |
SENDER | Reply to SENDER Regarding this Message |
|
Kinda like saying " I don't think.........." to your
wife ( or boss).
Clif :-)
>
> See? I told you I didn't even KNOW how I get myself in so much trouble!!!
>
> Thanks Bill, I'll remember that....hahahahaha
>
Message 12
INDEX | Back to Main INDEX |
PREVIOUS | Skip to PREVIOUS Message |
NEXT | Skip to NEXT Message |
LIST | Reply to LIST Regarding this Message |
SENDER | Reply to SENDER Regarding this Message |
|
Subject: | Re: Rudder Cable Routing |
I'm assuming there's less than 3=B0 of direction change,
right?
Clif
Hi Jack,
I didn't think it was necessary to add the pulley. I took a small
piece of phenolic, drilled a hole in it, and glued it to the back side
of the seat, then ran the rudder cable through. There seems to be enough
slack in that system for it to work fine on mine. Very smooth operation
with no effort to move the rudder.
Dan Helsper
Puryear, TN
Message 13
INDEX | Back to Main INDEX |
PREVIOUS | Skip to PREVIOUS Message |
NEXT | Skip to NEXT Message |
LIST | Reply to LIST Regarding this Message |
SENDER | Reply to SENDER Regarding this Message |
|
Subject: | Ohio Piet fly-in june 18 th |
Thanks Skipp, I will keep you posted on any updates, Look forward to seeing
you both,
-
Shad
-
P.S. as last year your welcome to camp out friday and or sat night
--- On Mon, 4/25/11, skipgadd@earthlink.net <skipgadd@earthlink.net> wrote:
From: skipgadd@earthlink.net <skipgadd@earthlink.net>
Subject: RE: Pietenpol-List: Ohio Piet fly-in june 18 th
Shad, Ed and I are still planning on your fly in, weather permitting.
Skip
-
-
----- Original Message -----
From: shad bell
Sent: 4/25/2011 11:12:18 AM
Subject: Pietenpol-List: Ohio Piet fly-in june 18 th
Just trying to see if anyone is planning on attending our little pietenpol
fly-in here in Centerburg Ohio this june.- I will send out a few more rem
inders, but I need to get a rough head count so I can plan the food, drinks
.- We have a new identifier now it is no longer OH71, it is now 6CM, alth
ough it was OH0 for 2-3 weeks so it might still be that on a new sectional,
that is oscar-hotel-zero (the faa changed it because it is confusing to ha
ve an oscar and zero like that.)- So any of you Ohio area guys let me kno
w if you can make it, or if you can't.
-
Shad
Other Matronics Email List Services
These Email List Services are sponsored solely by Matronics and through the generous Contributions of its members.
-- Please support this service by making your Contribution today! --
|