---------------------------------------------------------- Pietenpol-List Digest Archive --- Total Messages Posted Mon 04/25/11: 13 ---------------------------------------------------------- Today's Message Index: ---------------------- 1. 04:03 AM - Re: Rudder Cable Routing (helspersew@aol.com) 2. 04:27 AM - Re: Rudder Cable Routing (Jerry Dotson) 3. 05:29 AM - Re: PHL May 2-6 (Bill Church) 4. 05:38 AM - latex bonding to fabric (Oscar Zuniga) 5. 05:43 AM - hangar visit (Oscar Zuniga) 6. 06:21 AM - Re: Re: PHL May 2-6 (Jim Markle) 7. 06:35 AM - Re: hangar visit (Ken Bickers) 8. 08:10 AM - Ohio Piet fly-in june 18 th (shad bell) 9. 02:50 PM - Re: latex bonding to fabric (Billy McCaskill) 10. 06:57 PM - Re: Ohio Piet fly-in june 18 th (skipgadd@earthlink.net) 11. 07:09 PM - Re: Re: PHL May 2-6 (Clif Dawson) 12. 08:04 PM - Re: Rudder Cable Routing (Clif Dawson) 13. 11:27 PM - Re: Ohio Piet fly-in june 18 th (shad bell) ________________________________ Message 1 _____________________________________ Time: 04:03:45 AM PST US Subject: Re: Pietenpol-List: Rudder Cable Routing From: helspersew@aol.com Hi Jack, I didn't think it was necessary to add the pulley. I took a small piece of phenolic, drilled a hole in it, and glued it to the back side of the seat, then ran the rudder cable through. There seems to be enough slack in that s ystem for it to work fine on mine. Very smooth operation with no effort to move the rudder. Dan Helsper Puryear, TN -----Original Message----- From: Jack Sent: Thu, Apr 21, 2011 7:37 pm Subject: Pietenpol-List: Rudder Cable Routing Would like some assistance with the routing of the rudder cables. I assume they need to go through the back-seat front panel. Then do they go to a p ulley? Any pictures or comments would help. Thanks! Jack DSM -= - The Pietenpol-List Email Forum - -= Use the Matronics List Features Navigator to browse -= the many List utilities such as List Un/Subscription, -= Archive Search & Download, 7-Day Browse, Chat, FAQ, -= Photoshare, and much much more: - -= --> http://www.matronics.com/Navigator?Pietenpol-List - -======================== -= - MATRONICS WEB FORUMS - -= Same great content also available via the Web Forums! - -= --> http://forums.matronics.com - -======================== -= - List Contribution Web Site - -= Thank you for your generous support! -= -Matt Dralle, List Admin. -= --> http://www.matronics.com/contribution -======================== ________________________________ Message 2 _____________________________________ Time: 04:27:39 AM PST US Subject: Pietenpol-List: Re: Rudder Cable Routing From: "Jerry Dotson" I ran my rudder cable through red oak blocks and like Dan's I feel no resistance from the setup. I just drilled a 1/4" hole in the block. -------- Jerry Dotson 59 Daniel Johnson Rd Baker, FL 32531 Started building NX510JD July, 2009 wing, tailfeathers done, fuselage rolling using Lycoming O-235 Read this topic online here: http://forums.matronics.com/viewtopic.php?p=338047#338047 ________________________________ Message 3 _____________________________________ Time: 05:29:56 AM PST US Subject: Pietenpol-List: Re: PHL May 2-6 From: "Bill Church" Jim, You're not helping to dispel those nasty rumors about things disappearing when you visit. The appropriate word is bring, not take. :) Jim wrote: > ... Be sure to take a camera... > Read this topic online here: http://forums.matronics.com/viewtopic.php?p=338050#338050 ________________________________ Message 4 _____________________________________ Time: 05:38:29 AM PST US From: Oscar Zuniga Subject: Pietenpol-List: latex bonding to fabric Holy smokes=2C Malcolm-! Your projects (the Titan and the Piet) look fabul ous! Very interesting details on how you did the finish and paint. I'll refrain from mentioning your folding wing and V-struts lest the purist s pounce on you =3Bo) Oscar Zuniga Air Camper NX41CC "Scout" San Antonio=2C TX website at http://www.flysquirrel.net ________________________________ Message 5 _____________________________________ Time: 05:43:25 AM PST US From: Oscar Zuniga Subject: Pietenpol-List: hangar visit As promised, Ken Bickers showed up at my hangar on Saturday afternoon with his wife in tow. What nice folks-! Ken was able to look over my Piet as well as visiting John's hangar and his Piet, so hopefully he got another nudge to "keep on building". The wind was pretty blustery for flying, so I didn't bother but it was OK because we got to talk and ask/answer questions, compare notes. Hangar visits sure can be fun, informative, and inspirational. Hey Ken: in hindsight, I should have told you about Rudy's BBQ over on Hwy. 1604. They have great BBQ and the place where I sent you, Stump's, probably just had burgers and the like. Next time ;o) Oscar Zuniga Air Camper NX41CC "Scout" San Antonio, TX website at http://www.flysquirrel.net ________________________________ Message 6 _____________________________________ Time: 06:21:06 AM PST US From: Jim Markle Subject: Re: Pietenpol-List: Re: PHL May 2-6 See? I told you I didn't even KNOW how I get myself in so much trouble!!! Thanks Bill, I'll remember that....hahahahaha -----Original Message----- >From: Bill Church >Sent: Apr 25, 2011 7:27 AM >To: pietenpol-list@matronics.com >Subject: Pietenpol-List: Re: PHL May 2-6 > > >Jim, >You're not helping to dispel those nasty rumors about things disappearing when you visit. The appropriate word is bring, not take. :) > >Jim wrote: > >> ... Be sure to take a camera... >> > > >Read this topic online here: > >http://forums.matronics.com/viewtopic.php?p=338050#338050 > > ________________________________ Message 7 _____________________________________ Time: 06:35:03 AM PST US Subject: Re: Pietenpol-List: hangar visit From: Ken Bickers Oscar, Laura and I enjoyed meeting you and John on Saturday. We commented later that Pietenpol folks are always friendly and welcoming. And every Pietenpol -- even when the plans have been followed meticulously -- seems to exude individuality. We actually drove on to Bandera for a visit and some BBQ. What a place. Horses were tied up outside at least two of the bars. And the BBQ. It would cure a vegetarian. If anyone is coming through northern Colorado on the way to Estes Park, be sure to drop a note. I'd be happy to open my hangar to show my Pietenpol project. Thanks again to both you and John for the hospitality. Cheers, Ken On Mon, Apr 25, 2011 at 6:41 AM, Oscar Zuniga wrote: > > > As promised, Ken Bickers showed up at my hangar on Saturday afternoon > with his wife in tow. What nice folks-! Ken was able to look over my > Piet as well as visiting John's hangar and his Piet, so hopefully he > got another nudge to "keep on building". The wind was pretty blustery > for flying, so I didn't bother but it was OK because we got to talk > and ask/answer questions, compare notes. > > Hangar visits sure can be fun, informative, and inspirational. > > Hey Ken: in hindsight, I should have told you about Rudy's BBQ over on > Hwy. 1604. They have great BBQ and the place where I sent you, Stump's, > probably just had burgers and the like. Next time ;o) > > Oscar Zuniga > Air Camper NX41CC "Scout" > San Antonio, TX > website at http://www.flysquirrel.net > > ________________________________ Message 8 _____________________________________ Time: 08:10:22 AM PST US From: shad bell Subject: Pietenpol-List: Ohio Piet fly-in june 18 th Just trying to see if anyone is planning on attending our little pietenpol fly-in here in Centerburg Ohio this june.- I will send out a few more rem inders, but I need to get a rough head count so I can plan the food, drinks .- We have a new identifier now it is no longer OH71, it is now 6CM, alth ough it was OH0 for 2-3 weeks so it might still be that on a new sectional, that is oscar-hotel-zero (the faa changed it because it is confusing to ha ve an oscar and zero like that.)- So any of you Ohio area guys let me kno w if you can make it, or if you can't. - Shad ________________________________ Message 9 _____________________________________ Time: 02:50:01 PM PST US Subject: Pietenpol-List: Re: latex bonding to fabric From: "Billy McCaskill" Wow, who knew latex could look that nice? Beautiful work, Malcolm. This just confirms my choice of using latex when I get to that stage on my project, perhaps in the next decade or so... And no, I have not picked out a color scheme for my Piet project yet in case anyone was wondering. There are far more important things to worry about like building ribs. [Wink] do not archive -------- Billy McCaskill Urbana, IL tail section almost done, starting on ribs soon Read this topic online here: http://forums.matronics.com/viewtopic.php?p=338100#338100 ________________________________ Message 10 ____________________________________ Time: 06:57:55 PM PST US From: "skipgadd@earthlink.net" Subject: RE: Pietenpol-List: Ohio Piet fly-in june 18 th Shad, Ed and I are still planning on your fly in, weather permitting. Skip ----- Original Message ----- From: shad bell Sent: 4/25/2011 11:12:18 AM Subject: Pietenpol-List: Ohio Piet fly-in june 18 th Just trying to see if anyone is planning on attending our little pietenpol fly-in here in Centerburg Ohio this june. I will send out a few more reminders, but I need to get a rough head count so I can plan the food, drinks. We have a new identifier now it is no longer OH71, it is now 6CM, although it was OH0 for 2-3 weeks so it might still be that on a new sectional, that is oscar-hotel-zero (the faa changed it because it is confusing to have an oscar and zero like that.) So any of you Ohio area guys let me know if you can make it, or if you can't. Shad ________________________________ Message 11 ____________________________________ Time: 07:09:00 PM PST US From: "Clif Dawson" Subject: Re: Pietenpol-List: Re: PHL May 2-6 Kinda like saying " I don't think.........." to your wife ( or boss). Clif :-) > > See? I told you I didn't even KNOW how I get myself in so much trouble!!! > > Thanks Bill, I'll remember that....hahahahaha > ________________________________ Message 12 ____________________________________ Time: 08:04:48 PM PST US From: "Clif Dawson" Subject: Re: Pietenpol-List: Rudder Cable Routing I'm assuming there's less than 3=B0 of direction change, right? Clif Hi Jack, I didn't think it was necessary to add the pulley. I took a small piece of phenolic, drilled a hole in it, and glued it to the back side of the seat, then ran the rudder cable through. There seems to be enough slack in that system for it to work fine on mine. Very smooth operation with no effort to move the rudder. Dan Helsper Puryear, TN ________________________________ Message 13 ____________________________________ Time: 11:27:32 PM PST US From: shad bell Subject: RE: Pietenpol-List: Ohio Piet fly-in june 18 th Thanks Skipp, I will keep you posted on any updates, Look forward to seeing you both, - Shad - P.S. as last year your welcome to camp out friday and or sat night --- On Mon, 4/25/11, skipgadd@earthlink.net wrote: From: skipgadd@earthlink.net Subject: RE: Pietenpol-List: Ohio Piet fly-in june 18 th Shad, Ed and I are still planning on your fly in, weather permitting. Skip - - ----- Original Message ----- From: shad bell Sent: 4/25/2011 11:12:18 AM Subject: Pietenpol-List: Ohio Piet fly-in june 18 th Just trying to see if anyone is planning on attending our little pietenpol fly-in here in Centerburg Ohio this june.- I will send out a few more rem inders, but I need to get a rough head count so I can plan the food, drinks .- We have a new identifier now it is no longer OH71, it is now 6CM, alth ough it was OH0 for 2-3 weeks so it might still be that on a new sectional, that is oscar-hotel-zero (the faa changed it because it is confusing to ha ve an oscar and zero like that.)- So any of you Ohio area guys let me kno w if you can make it, or if you can't. - Shad ------------------------------------------------------------------------------------- Other Matronics Email List Services ------------------------------------------------------------------------------------- Post A New Message pietenpol-list@matronics.com UN/SUBSCRIBE http://www.matronics.com/subscription List FAQ http://www.matronics.com/FAQ/Pietenpol-List.htm Web Forum Interface To Lists http://forums.matronics.com Matronics List Wiki http://wiki.matronics.com Full Archive Search Engine http://www.matronics.com/search 7-Day List Browse http://www.matronics.com/browse/pietenpol-list Browse Digests http://www.matronics.com/digest/pietenpol-list Browse Other Lists http://www.matronics.com/browse Live Online Chat! http://www.matronics.com/chat Archive Downloading http://www.matronics.com/archives Photo Share http://www.matronics.com/photoshare Other Email Lists http://www.matronics.com/emaillists Contributions http://www.matronics.com/contribution ------------------------------------------------------------------------------------- These Email List Services are sponsored solely by Matronics and through the generous Contributions of its members.