Today's Message Index:
----------------------
1. 03:10 AM - Re: Brodhead (Gboothe5)
2. 03:46 AM - Re: Brodhead (Dave and Connie)
3. 04:22 AM - dust cover on engine (Douwe Blumberg)
4. 05:17 AM - Re: Brodhead (Charles Campbell)
5. 07:07 AM - Re: dust cover on engine (Ryan Mueller)
6. 07:08 AM - Re: Brodhead (Ryan Mueller)
7. 07:35 AM - Re: Brodhead (amsafetyc@aol.com)
8. 07:54 AM - Re: Brodhead (Gboothe5)
9. 08:52 AM - Re: Brodhead (amsafetyc@aol.com)
10. 09:13 AM - Re: Brodhead (Gboothe5)
11. 09:26 AM - Re: dust cover on engine (Kringle)
12. 09:51 AM - Re: Brodhead (K5YAC)
13. 10:09 AM - Re: Re: Brodhead (Cuy, Michael D. (GRC-RXD0)[ASRC AEROSPACE CORP])
14. 12:49 PM - Re: Question for West Coast Pieters--Dan Cork, Caliente CA (AircamperN11MS)
15. 12:53 PM - Re: Question for West Coast Pieters--Dan Cork, Caliente CA (K5YAC)
16. 01:04 PM - catching up with a West Coast Piet Senior (Cuy, Michael D. (GRC-RXD0)[ASRC AEROSPACE CORP])
17. 01:07 PM - Re: Question for West Coast Pieters--Dan Cork, Caliente CA (AircamperN11MS)
18. 01:08 PM - Re: catching up with a West Coast Piet Senior (AircamperN11MS)
19. 02:28 PM - Re: Re: Brodhead (Dan Yocum)
20. 05:53 PM - Re: dust cover on engine (Jerry Dotson)
21. 09:27 PM - And so it begins.... In earnest (Mark Roberts)
22. 09:31 PM - Re: West Coast Piet Gathering (Mark Roberts)
23. 09:47 PM - Re: Re: Plywood Order (Mark Roberts)
Message 1
INDEX | Back to Main INDEX |
NEXT | Skip to NEXT Message |
LIST | Reply to LIST Regarding this Message |
SENDER | Reply to SENDER Regarding this Message |
|
That reminds me, Johnaren=99t you going to be in N.Cal
soon?
From: owner-pietenpol-list-server@matronics.com
[mailto:owner-pietenpol-list-server@matronics.com] On Behalf Of
amsafetyc@aol.com
Sent: Thursday, May 19, 2011 10:50 PM
Subject: Re: Pietenpol-List: Brodhead
Smile son
Sent via DROID on Verizon Wireless
-----Original message-----
From: John Hofmann <jhofmann@reesgroupinc.com>
Sent: Tue, May 17, 2011 11:58:29 GMT+00:00
Subject: Re: Pietenpol-List: Brodhead
Beware of these two characters when there.
John Hofmann
Vice-President, Information Technology
The Rees Group, Inc.
2424 American Lane
Madison, WI 53704
Phone: 608.443.2468 ext 150
Fax: 608.443.2474
Email: jhofmann@reesgroupinc.com
On May 17, 2011, at 1:53 AM, Amsafetyc@gmail.com wrote:
Dan always trys to bring a variety of beets a real crowd pleaser for
Dan!
And a mighty fine adult beverage if served at the right temperature
John
Do not archive
Sent via DROID on Verizon Wireless
-----Original message-----
From: jarheadpilot82 <jarheadpilot82@hotmail.com>
Sent: Tue, May 17, 2011 01:13:17 GMT+00:00
Subject: Pietenpol-List: Brodhead
As the new guy on the internet block, I am looking at going to Brodhead
for the first time this year, and I am not sure what to do. I am
thinking that I will come in on Thursday and leave on Saturday. Where do
I stay? Can I camp? Food? Is scotch the only drink, or will I be
accepted with other forms of adult beverage? (Wink)
How about a thread on tips and tricks for Brodhead? Thanks to all in
advance.
BTW, wing rib jig is done- first rib to be done this week, hopefully
before I leave on my next trip.
--------
Semper Fi,
Terry
Read this topic online here:
http://forums.matronics.com/viewtopic.php?p=340067#340067
--> http://www.matrclass=
<http://www.matronics.com/Navigator?Pietenpol-List>
"Apple-converted-space">
http://www.matronics.com/co================
= <http://www.matronics.com/contribution>
<http://www.matronics.com/contribution>
<http://www.matronics.com/contribution>
href="http://www.matronics.com/Navigator?Pietenpol-List">http://www.mat
ronics.com/Navigator?Pietenpol-List
href="http://forums.matronics.com">http://forums.matronics.com
href="http://www.matronics.com/contribution">http://www.matronics.com/c
ontribution
=
Message 2
INDEX | Back to Main INDEX |
PREVIOUS | Skip to PREVIOUS Message |
NEXT | Skip to NEXT Message |
LIST | Reply to LIST Regarding this Message |
SENDER | Reply to SENDER Regarding this Message |
|
Message 3
INDEX | Back to Main INDEX |
PREVIOUS | Skip to PREVIOUS Message |
NEXT | Skip to NEXT Message |
LIST | Reply to LIST Regarding this Message |
SENDER | Reply to SENDER Regarding this Message |
|
Subject: | dust cover on engine |
Hey all,
Getting ready to put my newly rebuilt engine back on. However, the project
sits in a corner of my studio and we're making a LOT of mess these days.
Mostly it's aluminum dust as we're grinding on some big aluminum projects.
I'm paranoid about stuff getting into my engine, not to say dirtying up her
pretty new paint job, and yet I need to hang it now to hook it up and finish
the cowling.
Thought you guys might have some clever ideas for covering it up.
Douwe
Message 4
INDEX | Back to Main INDEX |
PREVIOUS | Skip to PREVIOUS Message |
NEXT | Skip to NEXT Message |
LIST | Reply to LIST Regarding this Message |
SENDER | Reply to SENDER Regarding this Message |
|
Dave & Connie, there was no message re Brodhead!
----- Original Message -----
From: "Dave and Connie" <dmatt@frontiernet.net>
Sent: Friday, May 20, 2011 6:43 AM
Subject: Re: Pietenpol-List: Brodhead
>
>
>
Message 5
INDEX | Back to Main INDEX |
PREVIOUS | Skip to PREVIOUS Message |
NEXT | Skip to NEXT Message |
LIST | Reply to LIST Regarding this Message |
SENDER | Reply to SENDER Regarding this Message |
|
Subject: | Re: dust cover on engine |
Well, your concern is things getting inside. If it is assembled and ready t
o
go...the carb/intake and breather should pretty well be the only place for
"ambient dust" to get in. Tape those over and throw a bedsheet over it. If
you are really concerned, put a contractor's trash bag over it, and seal up
with duct tape. The way the weather is going thus far, should be fine. If i
t
starts getting hot and humid, toss a bag of dessicant in....but then
again....she better be on your Piet before that happens! (I would just go
with the bedsheet though)
Ryan
On Fri, May 20, 2011 at 6:18 AM, Douwe Blumberg <douweblumberg@earthlink.ne
t
> wrote:
> Hey all,
>
>
> Getting ready to put my newly rebuilt engine back on. However, the proje
ct
> sits in a corner of my studio and we=92re making a LOT of mess these days
.
> Mostly it=92s aluminum dust as we=92re grinding on some big aluminum proj
ects.
> I=92m paranoid about stuff getting into my engine, not to say dirtying up
her
> pretty new paint job, and yet I need to hang it now to hook it up and fin
ish
> the cowling.
>
>
> Thought you guys might have some clever ideas for covering it up.
>
>
> Douwe
>
> *
>
===========
===========
===========
===========
> *
>
>
Message 6
INDEX | Back to Main INDEX |
PREVIOUS | Skip to PREVIOUS Message |
NEXT | Skip to NEXT Message |
LIST | Reply to LIST Regarding this Message |
SENDER | Reply to SENDER Regarding this Message |
|
Trust me...the masses were loooooong ago disconcerted.... ;-)
do not archive
On Fri, May 20, 2011 at 12:50 AM, amsafetyc@aol.com <amsafetyc@aol.com>wrote:
> Smile son
>
>
> *Sent via DROID on Verizon Wireless*
>
Message 7
INDEX | Back to Main INDEX |
PREVIOUS | Skip to PREVIOUS Message |
NEXT | Skip to NEXT Message |
LIST | Reply to LIST Regarding this Message |
SENDER | Reply to SENDER Regarding this Message |
|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 8
INDEX | Back to Main INDEX |
PREVIOUS | Skip to PREVIOUS Message |
NEXT | Skip to NEXT Message |
LIST | Reply to LIST Regarding this Message |
SENDER | Reply to SENDER Regarding this Message |
|
That sounds like Monday, June 6, would be the only date available? And I
think you said Stockton area. Speaking for myself, I would like to plan
a dinner date, and I=99ll see if anyone else wants to join up.
Gary
Do not archive
From: owner-pietenpol-list-server@matronics.com
[mailto:owner-pietenpol-list-server@matronics.com] On Behalf Of
amsafetyc@aol.com
Sent: Friday, May 20, 2011 7:34 AM
Subject: RE: Pietenpol-List: Brodhead
Yes. I am thinking monday arrive Monday june first week out Tuesday pm
to portland back home friday I think that's the schedule. Back here wk
after nxt so cal la area for the wk hope to catch up on Piet visit
easier from La
John
Sent via DROID on Verizon Wireless
-----Original message-----
From: Gboothe5 <gboothe5@comcast.net>
Sent: Fri, May 20, 2011 10:10:41 GMT+00:00
Subject: RE: Pietenpol-List: Brodhead
That reminds me, Johnaren=99t you going to be in N.Cal
soon?
From: owner-pietenpol-list-server@matronics.com
[mailto:owner-pietenpol-list-server@matronics.com] On Behalf Of
amsafetyc@aol.com
Sent: Thursday, May 19, 2011 10:50 PM
Subject: Re: Pietenpol-List: Brodhead
Smile son
Sent via DROID on Verizon Wireless
-----Original message-----
From: John Hofmann <jhofmann@reesgroupinc.com>
Sent: Tue, May 17, 2011 11:58:29 GMT+00:00
Subject: Re: Pietenpol-List: Brodhead
Beware of these two characters when there.
John Hofmann
Vice-President, Information Technology
The Rees Group, Inc.
2424 American Lane
Madison, WI 53704
Phone: 608.443.2468 ext 150
Fax: 608.443.2474
Email: jhofmann@reesgroupinc.com
On May 17, 2011, at 1:53 AM, Amsafetyc@gmail.com wrote:
Dan always trys to bring a variety of beets a real crowd pleaser for
Dan!
And a mighty fine adult beverage if served at the right temperature
John
Do not archive
Sent via DROID on Verizon Wireless
-----Original message-----
From: jarheadpilot82 <jarheadpilot82@hotmail.com>
Sent: Tue, May 17, 2011 01:13:17 GMT+00:00
Subject: Pietenpol-List: Brodhead
As the new guy on the internet block, I am looking at going to Brodhead
for the first time this year, and I am not sure what to do. I am
thinking that I will come in on Thursday and leave on Saturday. Where do
I stay? Can I camp? Food? Is scotch the only drink, or will I be
accepted with other forms of adult beverage? (Wink)
How about a thread on tips and tricks for Brodhead? Thanks to all in
advance.
BTW, wing rib jig is done- first rib to be done this week, hopefully
before I leave on my next trip.
--------
Semper Fi,
Terry
Read this topic online here:
http://forums.matronics.com/viewtopic.php?p=340067#340067
--> http://www.matrclass=
<http://www.matronics.com/Navigator?Pietenpol-List>
"Apple-converted-space">
http://www.matronics.com/co================
= <http://www.matronics.com/contribution>
<http://www.matronics.com/contribution>
<http://www.matronics.com/contribution>
href="http://www.matronics.com/Navigator?Pietenpol-List">http://www.mat
ronics.com/Navigator?Pietenpol-List
href="http://forums.matronics.com">http://forums.matronics.com
href="http://www.matronics.com/contribution">http://www.matronics.com/c
ontribution
=
~,
_____
g=D3=93
Message 9
INDEX | Back to Main INDEX |
PREVIOUS | Skip to PREVIOUS Message |
NEXT | Skip to NEXT Message |
LIST | Reply to LIST Regarding this Message |
SENDER | Reply to SENDER Regarding this Message |
|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Message 10
INDEX | Back to Main INDEX |
PREVIOUS | Skip to PREVIOUS Message |
NEXT | Skip to NEXT Message |
LIST | Reply to LIST Regarding this Message |
SENDER | Reply to SENDER Regarding this Message |
|
Dinner Monday night, Sacramento, June 6. Send me the Hampton Inn
address, off list, John, and I=99ll figure something out. We may
be able to get Chris Tracy and Mike Weaver to join us, and maybe a few
more. We can drink beer and gossip freely about Jim Markle
Gary
Gboothe5@comcast.net
Do not archive
From: owner-pietenpol-list-server@matronics.com
[mailto:owner-pietenpol-list-server@matronics.com] On Behalf Of
amsafetyc@aol.com
Sent: Friday, May 20, 2011 8:49 AM
Subject: RE: Pietenpol-List: Brodhead
I see a plan emerging. Monday fly to Sacramento to Hampton inn
Sacramento tuesday drive to Stockton work the Sacramento to portland
Oregon 2 days fly home Friday. That's the plan so far I think
Sent via DROID on Verizon Wireless
-----Original message-----
From: Gboothe5 <gboothe5@comcast.net>
Sent: Fri, May 20, 2011 14:54:51 GMT+00:00
Subject: RE: Pietenpol-List: Brodhead
That sounds like Monday, June 6, would be the only date available? And I
think you said Stockton area. Speaking for myself, I would like to plan
a dinner date, and I=99ll see if anyone else wants to join up.
Gary
Do not archive
From: owner-pietenpol-list-server@matronics.com
[mailto:owner-pietenpol-list-server@matronics.com] On Behalf Of
amsafetyc@aol.com
Sent: Friday, May 20, 2011 7:34 AM
Subject: RE: Pietenpol-List: Brodhead
Yes. I am thinking monday arrive Monday june first week out Tuesday pm
to portland back home friday I think that's the schedule. Back here wk
after nxt so cal la area for the wk hope to catch up on Piet visit
easier from La
John
Sent via DROID on Verizon Wireless
-----Original message-----
From: Gboothe5 <gboothe5@comcast.net>
Sent: Fri, May 20, 2011 10:10:41 GMT+00:00
Subject: RE: Pietenpol-List: Brodhead
That reminds me, Johnaren=99t you going to be in N.Cal
soon?
From: owner-pietenpol-list-server@matronics.com
[mailto:owner-pietenpol-list-server@matronics.com] On Behalf Of
amsafetyc@aol.com
Sent: Thursday, May 19, 2011 10:50 PM
Subject: Re: Pietenpol-List: Brodhead
Smile son
Sent via DROID on Verizon Wireless
-----Original message-----
From: John Hofmann <jhofmann@reesgroupinc.com>
Sent: Tue, May 17, 2011 11:58:29 GMT+00:00
Subject: Re: Pietenpol-List: Brodhead
Beware of these two characters when there.
John Hofmann
Vice-President, Information Technology
The Rees Group, Inc.
2424 American Lane
Madison, WI 53704
Phone: 608.443.2468 ext 150
Fax: 608.443.2474
Email: jhofmann@reesgroupinc.com
On May 17, 2011, at 1:53 AM, Amsafetyc@gmail.com wrote:
Dan always trys to bring a variety of beets a real crowd pleaser for
Dan!
And a mighty fine adult beverage if served at the right temperature
John
Do not archive
Sent via DROID on Verizon Wireless
-----Original message-----
From: jarheadpilot82 <jarheadpilot82@hotmail.com>
Sent: Tue, May 17, 2011 01:13:17 GMT+00:00
Subject: Pietenpol-List: Brodhead
As the new guy on the internet block, I am looking at going to Brodhead
for the first time this year, and I am not sure what to do. I am
thinking that I will come in on Thursday and leave on Saturday. Where do
I stay? Can I camp? Food? Is scotch the only drink, or will I be
accepted with other forms of adult beverage? (Wink)
How about a thread on tips and tricks for Brodhead? Thanks to all in
advance.
BTW, wing rib jig is done- first rib to be done this week, hopefully
before I leave on my next trip.
--------
Semper Fi,
Terry
Read this topic online here:
http://forums.matronics.com/viewtopic.php?p=340067#340067
--> http://www.matrclass=
<http://www.matronics.com/Navigator?Pietenpol-List>
"Apple-converted-space">
http://www.matronics.com/co================
= <http://www.matronics.com/contribution>
<http://www.matronics.com/contribution>
<http://www.matronics.com/contribution>
href="http://www.matronics.com/Navigator?Pietenpol-List">http://www.mat
ronics.com/Navigator?Pietenpol-List
href="http://forums.matronics.com">http://forums.matronics.com
href="http://www.matronics.com/contribution">http://www.matronics.com/c
ontribution
=
~,
_____
g=D3=93
~=ED=B2=AC=DE=83g(=D3=8D=D3=87qzn
Message 11
INDEX | Back to Main INDEX |
PREVIOUS | Skip to PREVIOUS Message |
NEXT | Skip to NEXT Message |
LIST | Reply to LIST Regarding this Message |
SENDER | Reply to SENDER Regarding this Message |
|
Subject: | Re: dust cover on engine |
Use a tarp [Laughing]
--------
John
Read this topic online here:
http://forums.matronics.com/viewtopic.php?p=340461#340461
Message 12
INDEX | Back to Main INDEX |
PREVIOUS | Skip to PREVIOUS Message |
NEXT | Skip to NEXT Message |
LIST | Reply to LIST Regarding this Message |
SENDER | Reply to SENDER Regarding this Message |
|
There is that date again... June 6... D-Day. Don't forget the big band music.
do not archive
--------
Mark Chouinard
Wings, Center Section and Empannage framed up - Working on Fuselage
Read this topic online here:
http://forums.matronics.com/viewtopic.php?p=340464#340464
Message 13
INDEX | Back to Main INDEX |
PREVIOUS | Skip to PREVIOUS Message |
NEXT | Skip to NEXT Message |
LIST | Reply to LIST Regarding this Message |
SENDER | Reply to SENDER Regarding this Message |
|
And after I go to LA Saturday (lower Akron) I'll make my way over to Parma, North
Royalton, Strongsville,
Columbia Station and take Flight 48MC to the valley nonstop, unrefueled and after
I have a snack at McDonald's
head up I-71 till the Slawson cutoff and probably be there Wednesday late or Thursday
sometime.
Mike C.
do not archive
sent from my regular old Dell Windows 7 PC not a smartphone or dumb phone or Ipod,
Ipad, or Itouch.
Message 14
INDEX | Back to Main INDEX |
PREVIOUS | Skip to PREVIOUS Message |
NEXT | Skip to NEXT Message |
LIST | Reply to LIST Regarding this Message |
SENDER | Reply to SENDER Regarding this Message |
|
Subject: | Re: Question for West Coast Pieters--Dan Cork, Caliente |
CA
Mike,
I just got off the phone with Dan Cork. He sounded pretty good. I'm sure he would
like to hear from you. He said you were a great inspiration for him. Only
got to talk for a couple of minutes due to me being at work. I know, I shouldn't
let that get in the way. But it pays the bills and I have to. The number
I gave you is a good one to reach him at.
Have a great weekend,
--------
Scott Liefeld
Flying N11MS since March 1972
Steel Tube
C-85-12
Wire Wheels
Brodhead in 1996
Read this topic online here:
http://forums.matronics.com/viewtopic.php?p=340479#340479
Message 15
INDEX | Back to Main INDEX |
PREVIOUS | Skip to PREVIOUS Message |
NEXT | Skip to NEXT Message |
LIST | Reply to LIST Regarding this Message |
SENDER | Reply to SENDER Regarding this Message |
|
Subject: | Re: Question for West Coast Pieters--Dan Cork, Caliente |
CA
Great! Glad you guys are catching up with him. Someone be sure to tell him that
his airplane is still flying regularly.
--------
Mark Chouinard
Wings, Center Section and Empannage framed up - Working on Fuselage
Read this topic online here:
http://forums.matronics.com/viewtopic.php?p=340480#340480
Message 16
INDEX | Back to Main INDEX |
PREVIOUS | Skip to PREVIOUS Message |
NEXT | Skip to NEXT Message |
LIST | Reply to LIST Regarding this Message |
SENDER | Reply to SENDER Regarding this Message |
|
Subject: | catching up with a West Coast Piet Senior |
Great news Scott L. and thanks to Mark Chouinard I was able to e-mail back and
forth with Dan
Cork's son and he verified his Dad's phone number. Glad you were able to talk
with him. I'll
call him when I have a bit of free time soon. Really happy to hear he's still
around...super neat
guy with a rich aviation background.
Mike C.
do not archive
Message 17
INDEX | Back to Main INDEX |
PREVIOUS | Skip to PREVIOUS Message |
NEXT | Skip to NEXT Message |
LIST | Reply to LIST Regarding this Message |
SENDER | Reply to SENDER Regarding this Message |
|
Subject: | Re: Question for West Coast Pieters--Dan Cork, Caliente |
CA
He said he knew it was flying and also said something about the EAA magazine and
maybe an article in it. I don't remember seeing it. He was happy that the
all the strange markings and such were still intact on the plane.
--------
Scott Liefeld
Flying N11MS since March 1972
Steel Tube
C-85-12
Wire Wheels
Brodhead in 1996
Read this topic online here:
http://forums.matronics.com/viewtopic.php?p=340481#340481
Message 18
INDEX | Back to Main INDEX |
PREVIOUS | Skip to PREVIOUS Message |
NEXT | Skip to NEXT Message |
LIST | Reply to LIST Regarding this Message |
SENDER | Reply to SENDER Regarding this Message |
|
Subject: | Re: catching up with a West Coast Piet Senior |
He'll really like that.
--------
Scott Liefeld
Flying N11MS since March 1972
Steel Tube
C-85-12
Wire Wheels
Brodhead in 1996
Read this topic online here:
http://forums.matronics.com/viewtopic.php?p=340484#340484
Message 19
INDEX | Back to Main INDEX |
PREVIOUS | Skip to PREVIOUS Message |
NEXT | Skip to NEXT Message |
LIST | Reply to LIST Regarding this Message |
SENDER | Reply to SENDER Regarding this Message |
|
Excellent news, sir! Excellent news!
On 05/20/2011 12:06 PM, Cuy, Michael D. (GRC-RXD0)[ASRC AEROSPACE CORP]
wrote:
> --> Pietenpol-List message posted by: "Cuy, Michael D. (GRC-RXD0)[ASRC AEROSPACE
CORP]"<michael.d.cuy@nasa.gov>
>
> And after I go to LA Saturday (lower Akron) I'll make my way over to Parma, North
Royalton, Strongsville,
> Columbia Station and take Flight 48MC to the valley nonstop, unrefueled and after
I have a snack at McDonald's
> head up I-71 till the Slawson cutoff and probably be there Wednesday late or
Thursday sometime.
>
> Mike C.
>
> do not archive
>
> sent from my regular old Dell Windows 7 PC not a smartphone or dumb phone or
Ipod, Ipad, or Itouch.
>
>
--
Dan Yocum
Fermilab 630.840.6509
yocum@fnal.gov, http://fermigrid.fnal.gov
"I fly because it releases my mind from the tyranny of petty things."
Message 20
INDEX | Back to Main INDEX |
PREVIOUS | Skip to PREVIOUS Message |
NEXT | Skip to NEXT Message |
LIST | Reply to LIST Regarding this Message |
SENDER | Reply to SENDER Regarding this Message |
|
Subject: | Re: dust cover on engine |
Douwe,
I use those trash bags that are really big. I just slip it over the engine and
tie a wire around it at the rear of the engine. I don't remember where I got them
but they work great.
--------
Jerry Dotson
59 Daniel Johnson Rd
Baker, FL 32531
Started building NX510JD July, 2009
wing, tailfeathers done, fuselage rolling
using Lycoming O-235
Read this topic online here:
http://forums.matronics.com/viewtopic.php?p=340494#340494
Message 21
INDEX | Back to Main INDEX |
PREVIOUS | Skip to PREVIOUS Message |
NEXT | Skip to NEXT Message |
LIST | Reply to LIST Regarding this Message |
SENDER | Reply to SENDER Regarding this Message |
|
Subject: | And so it begins.... In earnest |
Well, I brought home the Fuse side jig today and assembled it in the shop.
Next stop: taking raw air-dryed vertical grain sitka spruce and cutting it
into very long 1.25" square sticks and planing them into 1" square sticks to
begin!
Here's pics:
Message 22
INDEX | Back to Main INDEX |
PREVIOUS | Skip to PREVIOUS Message |
NEXT | Skip to NEXT Message |
LIST | Reply to LIST Regarding this Message |
SENDER | Reply to SENDER Regarding this Message |
|
Subject: | Re: West Coast Piet Gathering |
Hey Mike:
Jody and I will be there again this year.... She's the one that keeps
reminding me what weekend it is, so I know she's serious!
See you then!
Mark
On Wed, May 18, 2011 at 11:49 AM, Michael Groah <dskogrover@yahoo.com>wrote:
> **Ok everyone, We're just two and a half weeks away from our third annual West
Coast Pietenpol Gathering!
>
> Date: Saturday June 4th
> Location: Frazier Lake (very nice grass strip airport just north of Hollister
CA)
>
> If you're planning on coming it would be nice if you could rsvp to Charlie Miller
(our host)
> or my self Mike Groah so Charlie can plan the food. We had a great turn out
and fun time
> last year
> and I'm sure this year will be even better.
>
> Attached is the info sheet for the event which has the times, phone numbers and
other details.
>
> Thanks, and I hope to see you in June!
>
> Mike Groah
> Tulare CA
> *
>
> *
>
>
Message 23
INDEX | Back to Main INDEX |
PREVIOUS | Skip to PREVIOUS Message |
NEXT | Skip to NEXT Message |
LIST | Reply to LIST Regarding this Message |
SENDER | Reply to SENDER Regarding this Message |
|
Subject: | Re: Plywood Order |
Ha!
Ok, Ok,,,, I know what a dork I must seem with the CNC stuff. But actually,
most of the time I have spent on the CNC stuff has been time when I couldn't
build airplane parts. I either didn't have the money, or the area to build.
Much of what I am doing is a part of the whole process for me: Enjoyable and
fun. I am building the plane to fit me, and that has taken a little
re-designing in Sketch up, and making the adjustments 'fit'.
However, if I had the money over the last few months, I wouldn't have spent
all that time drawing the plane and making CNC jig drawings. I'da been
building a plane...
Oddly enough, the drawings and the cut files took less time than attempting
to draw the fuse pattern on the building board, and potentially getting the
drawing wrong.
Either way, fun stuff for me :o)
Mark
On Wed, May 18, 2011 at 5:50 AM, Bill Church <billspiet@sympatico.ca> wrote:
> billspiet@sympatico.ca>
>
> First off, 1/16" IS the thickness called for in the plans, for the wing rib
> gussets. I used Finnish Birch A/C ply for mine, but the ribs are very
> robust. While Okoume is not quite as strong as Birch I'm sure it would work
> just fine for the rib gussets. I'm using 1088 Okoume Marine ply for all the
> rest of my plywood in my construction.
> And secondly, Mark (Roberts), never mind making CNC-machined jigs - why not
> just build some airplane parts.
>
> Bill C.
>
>
> Read this topic online here:
>
> http://forums.matronics.com/viewtopic.php?p=340261#340261
>
>
Other Matronics Email List Services
These Email List Services are sponsored solely by Matronics and through the generous Contributions of its members.
-- Please support this service by making your Contribution today! --
|