---------------------------------------------------------- Pietenpol-List Digest Archive --- Total Messages Posted Wed 06/29/11: 9 ---------------------------------------------------------- Today's Message Index: ---------------------- 1. 04:57 AM - Re: Brodhead (Don Emch) 2. 04:57 AM - T-shirts (echobravo4) 3. 06:07 AM - Piet Items available (Pieti Lowell) 4. 06:20 AM - Re: I love my job....sometimes (TOM STINEMETZE) 5. 09:08 AM - Re: Re: Brodhead (shad bell) 6. 12:33 PM - Re: T-shirts (Ryan Mueller) 7. 12:35 PM - Re: Piet Items available (Ryan Mueller) 8. 12:39 PM - Re: Re: Brodhead (Ryan Mueller) 9. 01:40 PM - Re: T-shirts (echobravo4) ________________________________ Message 1 _____________________________________ Time: 04:57:25 AM PST US Subject: Pietenpol-List: Re: Brodhead From: "Don Emch" Hey Shad, I am planning on flying up. I was thinking about joining the flying circus for a few days before, but now I'm not completely sure what I'll be doing. If I don't, I want to try to head out on Wednesday morning. If not, no later than than Thursday morning. Frank is planning to go too. He hasn't finalized his plans yet. I may try to hang with him, even though the Rudolph Piet is quite a bit slower. It sounds like we might be able to catch up to each other at some point though. I believe Jack P. will be heading up through our way around that same time too. Right Jack? In the next week or so I think I'll have better plans made. I do have a bit of a dilemma, the Chief sure would make for a comfortable ride to Brodhead! Don Emch NX899DE Read this topic online here: http://forums.matronics.com/viewtopic.php?p=344424#344424 ________________________________ Message 2 _____________________________________ Time: 04:57:49 AM PST US Subject: Pietenpol-List: T-shirts From: "echobravo4" anybody know if there are any of these shirts still available or who i could contact about them? I met one of the guys that restored the Piet at the Mid-Atlantic Air Museum and he really wanted one! Thanks do not archive -------- Earl Brown I may not have gone where I intended to go, but I think I have ended up where I intended to be. Read this topic online here: http://forums.matronics.com/viewtopic.php?p=344423#344423 Attachments: http://forums.matronics.com//files/screen_shot_2011_06_29_at_74517_am_292.png ________________________________ Message 3 _____________________________________ Time: 06:07:09 AM PST US Subject: Pietenpol-List: Piet Items available From: "Pieti Lowell" I will have the following for Piet builders, Maple forms to make fuel tank end plates Ken Perkins, full swiveling tail wheel assembly. Ford crank extension, to mount taper hub.with fitted prop nut. Pietenpolie Girl T shirts and more at Brodhead fly-in. Pieti Lowell Do-not archive Read this topic online here: http://forums.matronics.com/viewtopic.php?p=344429#344429 ________________________________ Message 4 _____________________________________ Time: 06:20:41 AM PST US From: "TOM STINEMETZE" Subject: Re: Pietenpol-List: I love my job....sometimes Nice looking Piet Larry, but did you even consider putting a Cummins diesel on the nose? You know how we all like to brag that the Pietenpol has flown with more different engines than any other airplane - EVER. Tom Stinemetze N328X >>> "Gboothe5" 6/28/2011 8:57 PM >>> Besides the interesting fact that Larrys Piet now sports Douwes old A engine ________________________________ Message 5 _____________________________________ Time: 09:08:50 AM PST US From: shad bell Subject: Re: Pietenpol-List: Re: Brodhead I have to agree with the comfort issue Don, 7-10 hrs in 1 day is a real but t, and back buster for me, not to mention the deafness that follows from ru nning short stacks on a crank snapper.- But when you get there it is all worth it, especially sat evening when there are 10 or more pietenpols buzzi ng around.- To Jack P., what route do you usually take? If you don't mind flying beside......hu hummmmm... behind... a yankee corvair we could tromp along accross Indiana to Brodhead togeather.- # weeks and counting down by the day. - Shad Hey Shad, I am planning on flying up.- I was thinking about joining the flying circ us for a few days before, but now I'm not completely sure what I'll be doin g.- If I don't, I want to try to head out on Wednesday morning.- If not , no later than than Thursday morning.- Frank is planning to go too.- H e hasn't finalized his plans yet.- I may try to hang with him, even thoug h the Rudolph Piet is quite a bit slower.- It sounds like we might be abl e to catch up to each other at some point though.- I believe Jack P. will be heading up through our way around that same time too.- Right Jack?- In the next week or so I think I'll have better plans made.- I do have a bit of a dilemma, the Chief sure would make for a comfortable ride to Brod head! Don Emch NX899DE Read this topic online here: http://forums.matronics.com/viewtopic.php?p=344424#344424 le, List Admin. ________________________________ Message 6 _____________________________________ Time: 12:33:19 PM PST US Subject: Re: Pietenpol-List: T-shirts From: Ryan Mueller You can pay me a mint for one....odds are the 80th shirts are long gone. I would imagine the remaining few went last year. However, last year's shirt was basically the same design....and I wouldn't be surprised if this year's shirt was the same. :P (which is fine) Only way to be sure is to come to Brodhead! Ryan do not archive On Wed, Jun 29, 2011 at 6:53 AM, echobravo4 wrote: > > anybody know if there are any of these shirts still available or who i > could contact about them? > > I met one of the guys that restored the Piet at the Mid-Atlantic Air Museum > and he really wanted one! > > Thanks > > do not archive > > -------- > Earl Brown > > I may not have gone where I intended to go, but I think I have ended up > where I intended to be. > > > Read this topic online here: > > http://forums.matronics.com/viewtopic.php?p=344423#344423 > > > Attachments: > > > http://forums.matronics.com//files/screen_shot_2011_06_29_at_74517_am_292.png > > ________________________________ Message 7 _____________________________________ Time: 12:35:56 PM PST US Subject: Re: Pietenpol-List: Piet Items available From: Ryan Mueller I thought the TW assy had some issues....foggy memory, my apologies.... do not archive On Wed, Jun 29, 2011 at 8:04 AM, Pieti Lowell wrote: > Lowellcfrank@yahoo.com> > > I will have the following for Piet builders, > Maple forms to make fuel tank end plates > Ken Perkins, full swiveling tail wheel assembly. > Ford crank extension, to mount taper hub.with fitted prop nut. > Pietenpolie Girl T shirts > and more at Brodhead fly-in. > Pieti Lowell > > Do-not archive > > > Read this topic online here: > > http://forums.matronics.com/viewtopic.php?p=344429#344429 > > ________________________________ Message 8 _____________________________________ Time: 12:39:23 PM PST US Subject: Re: Pietenpol-List: Re: Brodhead From: Ryan Mueller Shad, I'm sure Jack wouldn't mind flying beside you...he brought mine up from Tennessee last year with Randy Bush. He'll make do...he'll just have to S turn the whole way up so he doesn't lose you... :-P Ryan do not archive On Wed, Jun 29, 2011 at 11:05 AM, shad bell wrote: > I have to agree with the comfort issue Don, 7-10 hrs in 1 day is a real > butt, and back buster for me, not to mention the deafness that follows from > running short stacks on a crank snapper. But when you get there it is all > worth it, especially sat evening when there are 10 or more pietenpols > buzzing around. To Jack P., what route do you usually take? If you don't > mind flying beside......hu hummmmm... behind... a yankee corvair we could > tromp along accross Indiana to Brodhead togeather. # weeks and counting > down by the day. > > Shad > > > Hey Shad, > > I am planning on flying up. I was thinking about joining the flying circus > for a few days before, but now I'm not completely sure what I'll be doing. > If I don't, I want to try to head out on Wednesday morning. If not, no > later than than Thursday morning. Frank is planning to go too. He hasn't > finalized his plans yet. I may try to hang with him, even though the > Rudolph Piet is quite a bit slower. It sounds like we might be able to > catch up to each other at some point though. I believe Jack P. will be > heading up through our way around that same time too. Right Jack? In the > next week or so I think I'll have better plans made. I do have a bit of a > dilemma, the Chief sure would make for a comfortable ride to Brodhead! > > Don Emch > NX899DE > > ________________________________ Message 9 _____________________________________ Time: 01:40:15 PM PST US Subject: Pietenpol-List: Re: T-shirts From: "echobravo4" > Only way to be sure is to come to Brodhead! > Don't rub it in!! -------- Earl Brown I may not have gone where I intended to go, but I think I have ended up where I intended to be. Read this topic online here: http://forums.matronics.com/viewtopic.php?p=344461#344461 ------------------------------------------------------------------------------------- Other Matronics Email List Services ------------------------------------------------------------------------------------- Post A New Message pietenpol-list@matronics.com UN/SUBSCRIBE http://www.matronics.com/subscription List FAQ http://www.matronics.com/FAQ/Pietenpol-List.htm Web Forum Interface To Lists http://forums.matronics.com Matronics List Wiki http://wiki.matronics.com Full Archive Search Engine http://www.matronics.com/search 7-Day List Browse http://www.matronics.com/browse/pietenpol-list Browse Digests http://www.matronics.com/digest/pietenpol-list Browse Other Lists http://www.matronics.com/browse Live Online Chat! http://www.matronics.com/chat Archive Downloading http://www.matronics.com/archives Photo Share http://www.matronics.com/photoshare Other Email Lists http://www.matronics.com/emaillists Contributions http://www.matronics.com/contribution ------------------------------------------------------------------------------------- These Email List Services are sponsored solely by Matronics and through the generous Contributions of its members.