Pietenpol-List Digest Archive

Thu 10/13/11


Total Messages Posted: 34



Today's Message Index:
----------------------
 
     1. 01:40 AM - Re: Is there nothing casein glue can't do? (flea)
     2. 04:00 AM - Re: "He's a four-flusher, Mary Beth..." (helspersew@aol.com)
     3. 04:08 AM - Re: How to contact a local Piet? (j_dunavin)
     4. 04:09 AM - Re: How to contact a local Piet? (j_dunavin)
     5. 04:19 AM - Re: New to List (Jerry Dotson)
     6. 04:25 AM - Re: Update on Mike "Tools" Danford's Trek back to GA (Dale McCleskey)
     7. 05:14 AM - Re: Update on Mike "Tools" Danford's Trek back to GA (tools)
     8. 05:17 AM - Re: Update on Mike "Tools" Danford's Trek back to GA (tools)
     9. 05:56 AM - Push Pull Elevator? (Chris Rusch)
    10. 06:01 AM - Re: Holes in helmet box (Jack Phillips)
    11. 06:33 AM - Re: "He's a four-flusher, Mary Beth..." (Gene Rambo)
    12. 07:00 AM - Re: "He's a four-flusher, Mary Beth..." (helspersew@aol.com)
    13. 07:07 AM - Re: New to List (Bryan Reed)
    14. 07:08 AM - Re: Re: Is there nothing casein glue can't do? (Dan Yocum)
    15. 08:16 AM - Re: Push Pull Elevator? (Barry Davis)
    16. 09:18 AM - Re: Push Pull Elevator? (Jim Boyer)
    17. 10:30 AM - Re: Push Pull Elevator? (Bill Church)
    18. 11:20 AM - Re: Push Pull Elevator? (Charles Campbell)
    19. 12:03 PM - Re: Push Pull Elevator? (skipgadd@earthlink.net)
    20. 03:08 PM - Re: Update on Mike "Tools" Danford's Trek back to GA (tools)
    21. 03:16 PM - Re: Re: Update on Mike "Tools" Danford's Trek back to GA (Jack Phillips)
    22. 03:21 PM - Re: Re: Update on Mike "Tools" Danford's Trek back to GA (Ryan Mueller)
    23. 03:26 PM - Re: Re: Update on Mike "Tools" Danford's Trek back to GA (Matthew VanDervort)
    24. 03:31 PM - Re: Re: Update on Mike "Tools" Danford's Trek back to GA (Charles Campbell)
    25. 03:46 PM - Update, non-Piet related (VanDy)
    26. 03:47 PM - Re: Re: Update on Mike "Tools" Danford's Trek back to GA (helspersew@aol.com)
    27. 04:12 PM - Re: Update, non-Piet related (Matthew VanDervort)
    28. 04:42 PM - Re: Update, non-Piet related (Michael Perez)
    29. 05:12 PM - Re: Update, non-Piet related (Jim Ash)
    30. 05:31 PM - Re: Update, non-Piet related (Jack Phillips)
    31. 05:33 PM - Re: Push Pull Elevator? (Gboothe5)
    32. 05:56 PM - Re: Update, non-Piet related (Ryan Mueller)
    33. 06:32 PM - Re: Update, non-Piet related (Kringle)
    34. 09:09 PM - Re: Push Pull Elevator?2 (jorge lizarraga)
 
 
 


Message 1


  • INDEX
  • Back to Main INDEX
  • NEXT
  • Skip to NEXT Message
  • LIST
  • Reply to LIST Regarding this Message
  • SENDER
  • Reply to SENDER Regarding this Message
    Time: 01:40:38 AM PST US
    Subject: Re: Is there nothing casein glue can't do?
    From: "flea" <jimgriggs@yahoo.com>
    yocum137 wrote: > > > At least I'm not on 24x7 pager duty, this week. > > -- Does anyone still use pagers? Seems like a waste to archive, so don't do it. Read this topic online here: http://forums.matronics.com/viewtopic.php?p=354902#354902


    Message 2


  • INDEX
  • Back to Main INDEX
  • PREVIOUS
  • Skip to PREVIOUS Message
  • NEXT
  • Skip to NEXT Message
  • LIST
  • Reply to LIST Regarding this Message
  • SENDER
  • Reply to SENDER Regarding this Message
    Time: 04:00:26 AM PST US
    Subject: Re: "He's a four-flusher, Mary Beth..."
    From: helspersew@aol.com
    Gene Rambo, I can't believe you're not more excited about the nickname you have come up with for your Piet, that I revealed to the list last week. You know, the o ne you'll paint on to the cowl? Dan Helsper Puryear, TN do not archive -----Original Message----- From: Gene Rambo <generambo@msn.com> Sent: Wed, Oct 12, 2011 7:50 pm Subject: RE: Pietenpol-List: "He's a four-flusher, Mary Beth..." I responded to you, Dan. I am here, waiting for signs of intelligent life. Gene do not archive Subject: Re: Pietenpol-List: "He's a four-flusher, Mary Beth..." From: helspersew@aol.com Finally, I am getting some some empathy from this group. Dan Helsper Puryear, TN do not archive PS. I have not been able to raise Gene Rambo. Are you out there? -----Original Message----- From: Douwe Blumberg <douweblumberg@earthlink.net> Sent: Wed, Oct 12, 2011 7:20 am Subject: Pietenpol-List: "He's a four-flusher, Mary Beth..." HEY, WAIT JUST ONE DOGGON (SP?) MINUTE!!! For the record =9CRe-Piet=9D has been painted on my wings for c lose to a year and now Gardiner is gonna swipe it my name just like Gene Ra mbo did with Dan=99s paint scheme. (Now I understand your paint and a ngst Dan) Wow, is there no shame or humanity left in this world? All in jest, Gardiner, name her what you like, you will have earned it at t hat point, but to avoid confusion, maybe =9Crepiet II=9D?? Douwe Do not archive " target=_blank>http://www.matronics.com/Navigator?Pietenpol-List ://forums.matronics.com lank>http://www.matronics.com/contribution st" target="_blank">http://www.matronics.com/Navigator?Pietenpol-List ttp://forums.matronics.com "_blank">http://www.matronics.com/contribution -= - The Pietenpol-List Email Forum - -= Use the Matronics List Features Navigator to browse -= the many List utilities such as List Un/Subscription, -= Archive Search & Download, 7-Day Browse, Chat, FAQ, -= Photoshare, and much much more: - -= --> http://www.matronics.com/Navigator?Pietenpol-List - -======================== -= - MATRONICS WEB FORUMS - -= Same great content also available via the Web Forums! - -= --> http://forums.matronics.com - -======================== -= - List Contribution Web Site - -= Thank you for your generous support! -= -Matt Dralle, List Admin. -= --> http://www.matronics.com/contribution -========================


    Message 3


  • INDEX
  • Back to Main INDEX
  • PREVIOUS
  • Skip to PREVIOUS Message
  • NEXT
  • Skip to NEXT Message
  • LIST
  • Reply to LIST Regarding this Message
  • SENDER
  • Reply to SENDER Regarding this Message
    Time: 04:08:32 AM PST US
    Subject: Re: How to contact a local Piet?
    From: "j_dunavin" <j_dunavin@hotmail.com>
    I think that my boy and I will make our way over to the airport and check in with the guys over there. Give them my business card and ask them to give it to Tim. Besides there is a T-38 gate guard over there that he really likes to see. Read this topic online here: http://forums.matronics.com/viewtopic.php?p=354906#354906


    Message 4


  • INDEX
  • Back to Main INDEX
  • PREVIOUS
  • Skip to PREVIOUS Message
  • NEXT
  • Skip to NEXT Message
  • LIST
  • Reply to LIST Regarding this Message
  • SENDER
  • Reply to SENDER Regarding this Message
    Time: 04:09:08 AM PST US
    Subject: Re: How to contact a local Piet?
    From: "j_dunavin" <j_dunavin@hotmail.com>
    I think that my boy and I will make our way over to the airport and check in with the guys over there. Give them my business card and ask them to give it to Tim. Besides there is a T-38 gate guard over there that he really likes to see. Read this topic online here: http://forums.matronics.com/viewtopic.php?p=354907#354907


    Message 5


  • INDEX
  • Back to Main INDEX
  • PREVIOUS
  • Skip to PREVIOUS Message
  • NEXT
  • Skip to NEXT Message
  • LIST
  • Reply to LIST Regarding this Message
  • SENDER
  • Reply to SENDER Regarding this Message
    Time: 04:19:48 AM PST US
    Subject: Re: New to List
    From: "Jerry Dotson" <jdotson@centurylink.net>
    I took the Aircraft Spruce route and bought all the wood from them. I would do it again. I didn't have any scraps from poor quality wood. Not 1 piece. The spars and longerons were perfect and beautiful. I picked up my order at the Atlanta store. I toured the wood warehouse/mill shop. It was very impressive. do not archive -------- Jerry Dotson 59 Daniel Johnson Rd Baker, FL 32531 Started building NX510JD July, 2009 now covering 21&quot; wheels Lycoming O-235 C 2C Jay Anderson CloudCars prop 76 X 44 Read this topic online here: http://forums.matronics.com/viewtopic.php?p=354908#354908


    Message 6


  • INDEX
  • Back to Main INDEX
  • PREVIOUS
  • Skip to PREVIOUS Message
  • NEXT
  • Skip to NEXT Message
  • LIST
  • Reply to LIST Regarding this Message
  • SENDER
  • Reply to SENDER Regarding this Message
    Time: 04:25:45 AM PST US
    Subject: Re: Update on Mike "Tools" Danford's Trek back to GA
    From: "Dale McCleskey" <dale.mccleskey@lifeway.com>
    Glad you made it home. Wanna hear the story sometime. And now I've got an excuse to fly south some spring day. Congrats on the Piet. -------- Dale McCleskey N7035N Read this topic online here: http://forums.matronics.com/viewtopic.php?p=354910#354910


    Message 7


  • INDEX
  • Back to Main INDEX
  • PREVIOUS
  • Skip to PREVIOUS Message
  • NEXT
  • Skip to NEXT Message
  • LIST
  • Reply to LIST Regarding this Message
  • SENDER
  • Reply to SENDER Regarding this Message
    Time: 05:14:54 AM PST US
    Subject: Re: Update on Mike "Tools" Danford's Trek back to GA
    From: "tools" <n0kkj@yahoo.com>
    Hey Dale! Sorry I missed you. Scott and I left our little "ditty" bag in Paxton (somewhere, IL?) with our phone charger, my wallet, corporate ID, SNACKS, stuff like that. So we had to make the MOST of our phone batteries and had them off unless necessary. Didn't get through Lebanon until yesterday afternoon, a short stop and then south while the weather was good. As it turned out, weather was JUST good enough to be non stressful, legal AND safe (so there were other moments earlier in the day...) so the last leg went well. Ran across a mechanic (the guy who helped you with the oil pressure gage in your piet before Brodhead) who knew you! He taught us how to prop it from behind and was kind enough to give us a prop getting out. This whole genre of flying is absolutely NOTHING like anything I've ever done before. It's damn challenging! Incredibly rewarding and really made this a life event. This was essentially my son's 18th birthday present. Hmmm, maybe my present... I've got to sit down and take notes, try to tag the pictures before memories slip away. We've definitely got plans to bring it back to Brodhead and Oshkosh next year. Thanks to all the offers for help and support along the way. Wild how I practically missed every planned stop, but really found some neat places along the way. Spending the night in Brodhead was really neat. We sat out there alone in the dark and made a little campfire. It was pretty cool. Time to get busy around here, I'll fill in on details later! Cheers, Tools Read this topic online here: http://forums.matronics.com/viewtopic.php?p=354914#354914


    Message 8


  • INDEX
  • Back to Main INDEX
  • PREVIOUS
  • Skip to PREVIOUS Message
  • NEXT
  • Skip to NEXT Message
  • LIST
  • Reply to LIST Regarding this Message
  • SENDER
  • Reply to SENDER Regarding this Message
    Time: 05:17:04 AM PST US
    Subject: Re: Update on Mike "Tools" Danford's Trek back to GA
    From: "tools" <n0kkj@yahoo.com>
    Oh ya Dale, I was definitely thinking of flying back up or inviting you down (or both). I flew over some really neat little field (I think I "tagged" it with my GPS) about half way that is a base for hunting lodges or something. That might be pretty cool. The Piet really draws a lot of attention where ever it goes, that was a lot of fun as well. Tools Read this topic online here: http://forums.matronics.com/viewtopic.php?p=354915#354915


    Message 9


  • INDEX
  • Back to Main INDEX
  • PREVIOUS
  • Skip to PREVIOUS Message
  • NEXT
  • Skip to NEXT Message
  • LIST
  • Reply to LIST Regarding this Message
  • SENDER
  • Reply to SENDER Regarding this Message
    Time: 05:56:20 AM PST US
    Subject: Push Pull Elevator?
    From: "Chris Rusch" <rmdinfo@lakefield.net>
    I am wondering if anyone has detailed pictures of the "BIg" Piets push pull elevator setups? i saw them at EAA and would like to study the design. The piet i am finishing has a push pull set up already in it, i would just like to compare the designs. Also, has anyone run the rudder control horn below the elevator to give a more straight line to the rudder bar? Again mine is already built that way and it seems to me there will be allot of twisting action of the rudder if not mounted centered. Thanks in advance! Chris Read this topic online here: http://forums.matronics.com/viewtopic.php?p=354917#354917


    Message 10


  • INDEX
  • Back to Main INDEX
  • PREVIOUS
  • Skip to PREVIOUS Message
  • NEXT
  • Skip to NEXT Message
  • LIST
  • Reply to LIST Regarding this Message
  • SENDER
  • Reply to SENDER Regarding this Message
    Time: 06:01:29 AM PST US
    From: "Jack Phillips" <pietflyr@bellsouth.net>
    Subject: Holes in helmet box
    Hi Dan, Those are just vent holes to allow moisture to dry out. Jack Phillips NX899JP Smith Mountain Lake, Virginia _____ From: owner-pietenpol-list-server@matronics.com [mailto:owner-pietenpol-list-server@matronics.com] On Behalf Of helspersew@aol.com Sent: Wednesday, October 12, 2011 8:20 AM Subject: Pietenpol-List: Holes in helmet box Hey Jack Phillips, I was admiring the photo of your radio set-up in your center section. What is the purpose of those small holes in the underside of the helmet box? Dan Helsper Puryear, TN


    Message 11


  • INDEX
  • Back to Main INDEX
  • PREVIOUS
  • Skip to PREVIOUS Message
  • NEXT
  • Skip to NEXT Message
  • LIST
  • Reply to LIST Regarding this Message
  • SENDER
  • Reply to SENDER Regarding this Message
    Time: 06:33:50 AM PST US
    Subject: Re: "He's a four-flusher, Mary Beth..."
    From: Gene Rambo <generambo@msn.com>
    What? My unique black and yellow scheme with "Re-Piet" on the cowl and "G. O wen Loensloe" on the fuselage? Gene Rambo Sent from my iPhone On Oct 13, 2011, at 6:57 AM, helspersew@aol.com wrote: > Gene Rambo, > > I can't believe you're not more excited about the nickname you have come u p with for your Piet, that I revealed to the list last week. You know, the o ne you'll paint on to the cowl? > > Dan Helsper > Puryear, TN > > do not archive > > > -----Original Message----- > From: Gene Rambo <generambo@msn.com> > To: pietenpol-list <pietenpol-list@matronics.com> > Sent: Wed, Oct 12, 2011 7:50 pm > Subject: RE: Pietenpol-List: "He's a four-flusher, Mary Beth..." > > I responded to you, Dan. I am here, waiting for signs of intelligent life . > > Gene > > do not archive > > To: pietenpol-list@matronics.com > Subject: Re: Pietenpol-List: "He's a four-flusher, Mary Beth..." > From: helspersew@aol.com > Date: Wed, 12 Oct 2011 08:37:04 -0400 > > Finally, I am getting some some empathy from this group. > > Dan Helsper > Puryear, TN > > do not archive > > PS. I have not been able to raise Gene Rambo. Are you out there? > > > -----Original Message----- > From: Douwe Blumberg <douweblumberg@earthlink.net> > To: pietenpolgroup <pietenpol-list@matronics.com> > Sent: Wed, Oct 12, 2011 7:20 am > Subject: Pietenpol-List: "He's a four-flusher, Mary Beth..." > > HEY, WAIT JUST ONE DOGGON (SP?) MINUTE!!! > > For the record =9CRe-Piet=9D has been painted on my wings for c lose to a year and now Gardiner is gonna swipe it my name just like Gene Ram bo did with Dan=99s paint scheme. (Now I understand your paint and ang st Dan) Wow, is there no shame or humanity left in this world? > > All in jest, Gardiner, name her what you like, you will have earned it at t hat point, but to avoid confusion, maybe =9Crepiet II=9D?? > > Douwe > > Do not archive > > > " target=_blank>http://www.matronics.com/Navigator?Pietenpol-List > p://forums.matronics.com > blank>http://www.matronics.com/contribution > > > > st" target="_blank">http://www.matronics.com/Navigator?Pietenpol-List > http://forums.matronics.com > ="_blank">http://www.matronics.com/contribution > > > > " target=_blank>http://www.matronics.com/Navigator?Pietenpol-List > p://forums.matronics.com > blank>http://www.matronics.com/contribution > > > ========================== ========= ========================== ========= ========================== ========= ========================== ========= >


    Message 12


  • INDEX
  • Back to Main INDEX
  • PREVIOUS
  • Skip to PREVIOUS Message
  • NEXT
  • Skip to NEXT Message
  • LIST
  • Reply to LIST Regarding this Message
  • SENDER
  • Reply to SENDER Regarding this Message
    Time: 07:00:08 AM PST US
    Subject: Re: "He's a four-flusher, Mary Beth..."
    From: helspersew@aol.com
    No, you told me last week that it would be "CopyT". Dan Helsper Puryear, TN do not archive -----Original Message----- From: Gene Rambo <generambo@msn.com> Sent: Thu, Oct 13, 2011 8:34 am Subject: Re: Pietenpol-List: "He's a four-flusher, Mary Beth..." What? My unique black and yellow scheme with "Re-Piet" on the cowl and "G. Owen Loensloe" on the fuselage? Gene Rambo Sent from my iPhone On Oct 13, 2011, at 6:57 AM, helspersew@aol.com wrote: Gene Rambo, I can't believe you're not more excited about the nickname you have come up with for your Piet, that I revealed to the list last week. You know, the o ne you'll paint on to the cowl? Dan Helsper Puryear, TN do not archive -----Original Message----- From: Gene Rambo <generambo@msn.com> Sent: Wed, Oct 12, 2011 7:50 pm Subject: RE: Pietenpol-List: "He's a four-flusher, Mary Beth..." I responded to you, Dan. I am here, waiting for signs of intelligent life. Gene do not archive Subject: Re: Pietenpol-List: "He's a four-flusher, Mary Beth..." From: helspersew@aol.com Finally, I am getting some some empathy from this group. Dan Helsper Puryear, TN do not archive PS. I have not been able to raise Gene Rambo. Are you out there? -----Original Message----- From: Douwe Blumberg <douweblumberg@earthlink.net> Sent: Wed, Oct 12, 2011 7:20 am Subject: Pietenpol-List: "He's a four-flusher, Mary Beth..." HEY, WAIT JUST ONE DOGGON (SP?) MINUTE!!! For the record =9CRe-Piet=9D has been painted on my wings for c lose to a year and now Gardiner is gonna swipe it my name just like Gene Ra mbo did with Dan=99s paint scheme. (Now I understand your paint and a ngst Dan) Wow, is there no shame or humanity left in this world? All in jest, Gardiner, name her what you like, you will have earned it at t hat point, but to avoid confusion, maybe =9Crepiet II=9D?? Douwe Do not archive " target=_blank>http://www.matronics.com/Navigator?Pietenpol-List ://forums.matronics.com lank>http://www.matronics.com/contribution st" target="_blank">http://www.matronics.com/Navigator?Pietenpol-List ttp://forums.matronics.com "_blank">http://www.matronics.com/contribution " target=_blank>http://www.matronics.com/Navigator?Pietenpol-List ://forums.matronics.com lank>http://www.matronics.com/contribution ========= http://www.matronics.com/Navigator?Pietenpol-List ======== forums.matronics.com">http://forums.matronics.com ======== "http://www.matronics.com/contribution">;http://www.matronics.com/contribut ion ======== -= - The Pietenpol-List Email Forum - -= Use the Matronics List Features Navigator to browse -= the many List utilities such as List Un/Subscription, -= Archive Search & Download, 7-Day Browse, Chat, FAQ, -= Photoshare, and much much more: - -= --> http://www.matronics.com/Navigator?Pietenpol-List - -======================== -= - MATRONICS WEB FORUMS - -= Same great content also available via the Web Forums! - -= --> http://forums.matronics.com - -======================== -= - List Contribution Web Site - -= Thank you for your generous support! -= -Matt Dralle, List Admin. -= --> http://www.matronics.com/contribution -========================


    Message 13


  • INDEX
  • Back to Main INDEX
  • PREVIOUS
  • Skip to PREVIOUS Message
  • NEXT
  • Skip to NEXT Message
  • LIST
  • Reply to LIST Regarding this Message
  • SENDER
  • Reply to SENDER Regarding this Message
    Time: 07:07:24 AM PST US
    Subject: Re: New to List
    From: "Bryan Reed" <reed44@gmail.com>
    I want to thank all for the welcome and loads of tips and good information. I apologize if I did not respond to all posts as time has been hard to find this week. I did indeed read all of them. Unfortunately, I am still cursed as a working man and with one in college my work load must still remain high. I am envious to those that have more free time. Actually I am "VERY" envious to those that are lucky enough to fly off all those beautiful grass strips. I only had the pleasure to do so once and it was like landing on carpet. Since I am not a devious man I will "attempt" to refrain from comments on the beautiful spring-like weather we will have for the next 6-months while many of you endure the harsh coming months. : ) I will full well expect the comments regarding our heat here in Arizona for the months of July and August but alas would not want to trade my 2 for your 6. : ) Cheers to all and CAVU, Bryan -------- While I may not always be right, I apologize well. Read this topic online here: http://forums.matronics.com/viewtopic.php?p=354924#354924


    Message 14


  • INDEX
  • Back to Main INDEX
  • PREVIOUS
  • Skip to PREVIOUS Message
  • NEXT
  • Skip to NEXT Message
  • LIST
  • Reply to LIST Regarding this Message
  • SENDER
  • Reply to SENDER Regarding this Message
    Time: 07:08:16 AM PST US
    From: Dan Yocum <yocum@fnal.gov>
    Subject: Re: Is there nothing casein glue can't do?
    On 10/13/2011 03:37 AM, flea wrote: > --> Pietenpol-List message posted by: "flea"<jimgriggs@yahoo.com> > > > yocum137 wrote: >> >> >> At least I'm not on 24x7 pager duty, this week. Oh, don't even get me started... By the way, the system is trained specifically to not archive a message only if it sees the following string, verbatim: do not archive -- Dan Yocum Fermilab 630.840.6509 yocum@fnal.gov, http://fermigrid.fnal.gov "I fly because it releases my mind from the tyranny of petty things."


    Message 15


  • INDEX
  • Back to Main INDEX
  • PREVIOUS
  • Skip to PREVIOUS Message
  • NEXT
  • Skip to NEXT Message
  • LIST
  • Reply to LIST Regarding this Message
  • SENDER
  • Reply to SENDER Regarding this Message
    Time: 08:16:27 AM PST US
    From: "Barry Davis" <bed@mindspring.com>
    Subject: Push Pull Elevator?
    I'll send you some pictures Barry Big Piet NX973BP -----Original Message----- From: owner-pietenpol-list-server@matronics.com [mailto:owner-pietenpol-list-server@matronics.com] On Behalf Of Chris Rusch Sent: Thursday, October 13, 2011 8:54 AM Subject: Pietenpol-List: Push Pull Elevator? --> <rmdinfo@lakefield.net> I am wondering if anyone has detailed pictures of the "BIg" Piets push pull elevator setups? i saw them at EAA and would like to study the design. The piet i am finishing has a push pull set up already in it, i would just like to compare the designs. Also, has anyone run the rudder control horn below the elevator to give a more straight line to the rudder bar? Again mine is already built that way and it seems to me there will be allot of twisting action of the rudder if not mounted centered. Thanks in advance! Chris Read this topic online here: http://forums.matronics.com/viewtopic.php?p=354917#354917


    Message 16


  • INDEX
  • Back to Main INDEX
  • PREVIOUS
  • Skip to PREVIOUS Message
  • NEXT
  • Skip to NEXT Message
  • LIST
  • Reply to LIST Regarding this Message
  • SENDER
  • Reply to SENDER Regarding this Message
    Time: 09:18:05 AM PST US
    From: Jim Boyer <boyerjrb@comcast.net>
    Subject: Re: Push Pull Elevator?
    Hi Barry, Can you put them on line? It seems like that might be a popular change to the Piet. Thanks, Jim B. do not archive


    Message 17


  • INDEX
  • Back to Main INDEX
  • PREVIOUS
  • Skip to PREVIOUS Message
  • NEXT
  • Skip to NEXT Message
  • LIST
  • Reply to LIST Regarding this Message
  • SENDER
  • Reply to SENDER Regarding this Message
    Time: 10:30:07 AM PST US
    Subject: Re: Push Pull Elevator?
    From: "Bill Church" <billspiet@sympatico.ca>
    Chris, When it comes to the Pietenpol, just about EVERY idea has been tried at least once - well, except some of Michael Perez's ideas... :) . Just kidding, Michael. The lowered rudder horn is one of the modifications commonly done in the UK. In order to compensate for the torsion imposed on the rudder, the structure gets beefed up, as indicated in the attached, poor image quality sketch. Bill C. Read this topic online here: http://forums.matronics.com/viewtopic.php?p=354932#354932 Attachments: http://forums.matronics.com//files/rudder_mod_107.jpg


    Message 18


  • INDEX
  • Back to Main INDEX
  • PREVIOUS
  • Skip to PREVIOUS Message
  • NEXT
  • Skip to NEXT Message
  • LIST
  • Reply to LIST Regarding this Message
  • SENDER
  • Reply to SENDER Regarding this Message
    Time: 11:20:21 AM PST US
    From: "Charles Campbell" <cncampbell@windstream.net>
    Subject: Re: Push Pull Elevator?
    Chris, the GN-1 plans show the rudder horn below the elevators but the bottom of the rudder is beefed up pretty well. Pobably adds a bit of weight but I think it's worth it-- I'm doing my rudder that way. I just don't like the looks of the rudder cables going up above the stab/elev. C ----- Original Message ----- From: "Chris Rusch" <rmdinfo@lakefield.net> Sent: Thursday, October 13, 2011 8:54 AM Subject: Pietenpol-List: Push Pull Elevator? > <rmdinfo@lakefield.net> > > I am wondering if anyone has detailed pictures of the "BIg" Piets push > pull elevator setups? i saw them at EAA and would like to study the > design. The piet i am finishing has a push pull set up already in it, i > would just like to compare the designs. Also, has anyone run the rudder > control horn below the elevator to give a more straight line to the rudder > bar? Again mine is already built that way and it seems to me there will be > allot of twisting action of the rudder if not mounted centered. Thanks in > advance! > Chris > > > Read this topic online here: > > http://forums.matronics.com/viewtopic.php?p=354917#354917 > > >


    Message 19


  • INDEX
  • Back to Main INDEX
  • PREVIOUS
  • Skip to PREVIOUS Message
  • NEXT
  • Skip to NEXT Message
  • LIST
  • Reply to LIST Regarding this Message
  • SENDER
  • Reply to SENDER Regarding this Message
    Time: 12:03:48 PM PST US
    From: "skipgadd@earthlink.net" <skipgadd@earthlink.net>
    Subject: Push Pull Elevator?
    Also, has anyone run the rudder control horn below the elevator to give a more straight line to the rudder bar? Again mine is already built that way and it seems to me there will be allot of twisting action of the rudder if not mounted centered. Thanks in advance! > Chris Chris, Attached is how I did mine. I like it but it hasn't flown yet. Ski


    Message 20


  • INDEX
  • Back to Main INDEX
  • PREVIOUS
  • Skip to PREVIOUS Message
  • NEXT
  • Skip to NEXT Message
  • LIST
  • Reply to LIST Regarding this Message
  • SENDER
  • Reply to SENDER Regarding this Message
    Time: 03:08:42 PM PST US
    Subject: Re: Update on Mike "Tools" Danford's Trek back to GA
    From: "tools" <n0kkj@yahoo.com>
    Here's some highlights: My copilot: Scott enjoying a little taxiing fam: A campfire.... Fully a quarter of the trip below 500 feet, awesome, but... Some was higher... This picture just doesn't do justice to the fall foliage: One very happy dad, new Piet owner and flyer, and happy to be there! Tools Read this topic online here: http://forums.matronics.com/viewtopic.php?p=354947#354947


    Message 21


  • INDEX
  • Back to Main INDEX
  • PREVIOUS
  • Skip to PREVIOUS Message
  • NEXT
  • Skip to NEXT Message
  • LIST
  • Reply to LIST Regarding this Message
  • SENDER
  • Reply to SENDER Regarding this Message
    Time: 03:16:28 PM PST US
    From: "Jack Phillips" <pietflyr@bellsouth.net>
    Subject: Re: Update on Mike "Tools" Danford's Trek back to
    GA No pictures visible. Were they supposed to be? Jack Phillips NX899JP Smith Mountain Lake, Virginia -----Original Message----- From: owner-pietenpol-list-server@matronics.com [mailto:owner-pietenpol-list-server@matronics.com] On Behalf Of tools Sent: Thursday, October 13, 2011 6:06 PM Subject: Pietenpol-List: Re: Update on Mike "Tools" Danford's Trek back to GA Here's some highlights: My copilot: Scott enjoying a little taxiing fam: A campfire.... Fully a quarter of the trip below 500 feet, awesome, but... Some was higher... This picture just doesn't do justice to the fall foliage: One very happy dad, new Piet owner and flyer, and happy to be there! Tools Read this topic online here: http://forums.matronics.com/viewtopic.php?p=354947#354947


    Message 22


  • INDEX
  • Back to Main INDEX
  • PREVIOUS
  • Skip to PREVIOUS Message
  • NEXT
  • Skip to NEXT Message
  • LIST
  • Reply to LIST Regarding this Message
  • SENDER
  • Reply to SENDER Regarding this Message
    Time: 03:21:39 PM PST US
    Subject: Re: Update on Mike "Tools" Danford's Trek back to
    GA
    From: Ryan Mueller <rmueller23@gmail.com>
    Matronics stripped them out of the email (ya know, the way real men read this *mailing list*). If you click on the forum link at the bottom you can see them... Ryan do not archive On Thu, Oct 13, 2011 at 5:13 PM, Jack Phillips <pietflyr@bellsouth.net>wrote: > pietflyr@bellsouth.net> > > No pictures visible. Were they supposed to be? > > Jack Phillips > NX899JP > Smith Mountain Lake, Virginia > > -----Original Message----- > From: owner-pietenpol-list-server@matronics.com > [mailto:owner-pietenpol-list-server@matronics.com] On Behalf Of tools > Sent: Thursday, October 13, 2011 6:06 PM > To: pietenpol-list@matronics.com > Subject: Pietenpol-List: Re: Update on Mike "Tools" Danford's Trek back to > GA > > > Here's some highlights: > > My copilot: > > > Scott enjoying a little taxiing fam: > > > A campfire.... > > > Fully a quarter of the trip below 500 feet, awesome, but... > > > Some was higher... > > > This picture just doesn't do justice to the fall foliage: > > > One very happy dad, new Piet owner and flyer, and happy to be there! > > > Tools > > > Read this topic online here: > > http://forums.matronics.com/viewtopic.php?p=354947#354947 > >


    Message 23


  • INDEX
  • Back to Main INDEX
  • PREVIOUS
  • Skip to PREVIOUS Message
  • NEXT
  • Skip to NEXT Message
  • LIST
  • Reply to LIST Regarding this Message
  • SENDER
  • Reply to SENDER Regarding this Message
    Time: 03:26:17 PM PST US
    From: Matthew VanDervort <matthew.vandervort@gmail.com>
    Subject: Re: Update on Mike "Tools" Danford's Trek back to
    GA I had to go to the actual matronics site to see them, great pics!! Sent from my iPhone On Oct 13, 2011, at 6:13 PM, "Jack Phillips" <pietflyr@bellsouth.net> wrote: > > No pictures visible. Were they supposed to be? > > Jack Phillips > NX899JP > Smith Mountain Lake, Virginia > > -----Original Message----- > From: owner-pietenpol-list-server@matronics.com > [mailto:owner-pietenpol-list-server@matronics.com] On Behalf Of tools > Sent: Thursday, October 13, 2011 6:06 PM > To: pietenpol-list@matronics.com > Subject: Pietenpol-List: Re: Update on Mike "Tools" Danford's Trek back to > GA > > > Here's some highlights: > > My copilot: > > > Scott enjoying a little taxiing fam: > > > A campfire.... > > > Fully a quarter of the trip below 500 feet, awesome, but... > > > Some was higher... > > > This picture just doesn't do justice to the fall foliage: > > > One very happy dad, new Piet owner and flyer, and happy to be there! > > > Tools > > > > > Read this topic online here: > > http://forums.matronics.com/viewtopic.php?p=354947#354947 > > > > > > > > > > > > > >


    Message 24


  • INDEX
  • Back to Main INDEX
  • PREVIOUS
  • Skip to PREVIOUS Message
  • NEXT
  • Skip to NEXT Message
  • LIST
  • Reply to LIST Regarding this Message
  • SENDER
  • Reply to SENDER Regarding this Message
    Time: 03:31:23 PM PST US
    From: "Charles Campbell" <cncampbell@windstream.net>
    Subject: Re: Update on Mike "Tools" Danford's Trek back to
    GA Jack, go to the matronics forum page -- the pics are there. C ----- Original Message ----- From: "Jack Phillips" <pietflyr@bellsouth.net> Sent: Thursday, October 13, 2011 6:13 PM Subject: RE: Pietenpol-List: Re: Update on Mike "Tools" Danford's Trek back to GA > <pietflyr@bellsouth.net> > > No pictures visible. Were they supposed to be? > > Jack Phillips > NX899JP > Smith Mountain Lake, Virginia > > -----Original Message----- > From: owner-pietenpol-list-server@matronics.com > [mailto:owner-pietenpol-list-server@matronics.com] On Behalf Of tools > Sent: Thursday, October 13, 2011 6:06 PM > To: pietenpol-list@matronics.com > Subject: Pietenpol-List: Re: Update on Mike "Tools" Danford's Trek back to > GA > > > Here's some highlights: > > My copilot: > > > Scott enjoying a little taxiing fam: > > > A campfire.... > > > Fully a quarter of the trip below 500 feet, awesome, but... > > > Some was higher... > > > This picture just doesn't do justice to the fall foliage: > > > One very happy dad, new Piet owner and flyer, and happy to be there! > > > Tools > > > Read this topic online here: > > http://forums.matronics.com/viewtopic.php?p=354947#354947 > > >


    Message 25


  • INDEX
  • Back to Main INDEX
  • PREVIOUS
  • Skip to PREVIOUS Message
  • NEXT
  • Skip to NEXT Message
  • LIST
  • Reply to LIST Regarding this Message
  • SENDER
  • Reply to SENDER Regarding this Message
    Time: 03:46:27 PM PST US
    Subject: Update, non-Piet related
    From: "VanDy" <matthew.vandervort@gmail.com>
    So it's been a long summer and I didn't get a darn thing done! But things are looking up for the Pietenpol finally! Spent the majority of the summer getting the t-craft up to par again, but I'll spare you those details, finally managed a job with normal hours, GE aviation in evendale. So more time for the Piet now! And some even better news, read close you single fella's!! First find a cute baby near an airplane.. Then find a cute girl to hold said baby for an airplane ride Teach the baby to fly Then have an awesome brother inlaw paint his yard so you can ask her to marry you! And she said yes :) Do not archive unless you need it for future reference -------- www.vansaviation.com follow my Piet rebuild there! almost dissasembled, getting ready to order all AN hardware and SS cable Read this topic online here: http://forums.matronics.com/viewtopic.php?p=354953#354953


    Message 26


  • INDEX
  • Back to Main INDEX
  • PREVIOUS
  • Skip to PREVIOUS Message
  • NEXT
  • Skip to NEXT Message
  • LIST
  • Reply to LIST Regarding this Message
  • SENDER
  • Reply to SENDER Regarding this Message
    Time: 03:47:26 PM PST US
    Subject: Re: Update on Mike "Tools" Danford's Trek back to
    GA
    From: helspersew@aol.com
    Mike: Simply awesome. Wow. Very cool. Congratulations to you and your son. Dan Helsper Puryear, TN do not archive -----Original Message----- From: tools <n0kkj@yahoo.com> Sent: Thu, Oct 13, 2011 5:08 pm Subject: Pietenpol-List: Re: Update on Mike "Tools" Danford's Trek back to GA Here's some highlights: My copilot: cott enjoying a little taxiing fam: campfire.... ully a quarter of the trip below 500 feet, awesome, but... ome was higher... his picture just doesn't do justice to the fall foliage: ne very happy dad, new Piet owner and flyer, and happy to be there! ools ead this topic online here: http://forums.matronics.com/viewtopic.php?p=354947#354947 -= - The Pietenpol-List Email Forum - -= Use the Matronics List Features Navigator to browse -= the many List utilities such as List Un/Subscription, -= Archive Search & Download, 7-Day Browse, Chat, FAQ, -= Photoshare, and much much more: - -= --> http://www.matronics.com/Navigator?Pietenpol-List - -======================== -= - MATRONICS WEB FORUMS - -= Same great content also available via the Web Forums! - -= --> http://forums.matronics.com - -======================== -= - List Contribution Web Site - -= Thank you for your generous support! -= -Matt Dralle, List Admin. -= --> http://www.matronics.com/contribution -========================


    Message 27


  • INDEX
  • Back to Main INDEX
  • PREVIOUS
  • Skip to PREVIOUS Message
  • NEXT
  • Skip to NEXT Message
  • LIST
  • Reply to LIST Regarding this Message
  • SENDER
  • Reply to SENDER Regarding this Message
    Time: 04:12:34 PM PST US
    Subject: Re: Update, non-Piet related
    From: Matthew VanDervort <matthew.vandervort@gmail.com>
    Pics.. For the real men.. Lol Zoom in on grass Back to your regular Piet broadcasting! Do not archive Sent from my iPhone On Oct 13, 2011, at 6:44 PM, "VanDy" <matthew.vandervort@gmail.com> wrote: m> > > So it's been a long summer and I didn't get a darn thing done! But things are looking up for the Pietenpol finally! Spent the majority of the summer getting the t-craft up to par again, but I'll spare you those details, fina lly managed a job with normal hours, GE aviation in evendale. So more time f or the Piet now! > > And some even better news, read close you single fella's!! > > First find a cute baby near an airplane.. > > > > Then find a cute girl to hold said baby for an airplane ride > > > Teach the baby to fly > > > > Then have an awesome brother inlaw paint his yard so you can ask her to ma rry you! > > > > And she said yes :) > > Do not archive unless you need it for future reference > > -------- > www.vansaviation.com follow my Piet rebuild there! > > almost dissasembled, getting ready to order all AN hardware and SS cable > > > > > Read this topic online here: > > http://forums.matronics.com/viewtopic.php?p=354953#354953 > > > > > > > ========================== ========= ========================== ========= ========================== ========= ========================== ========= > > > <pre><b><font size=2 color="#000000" face="courier new,courier"> </b></font></pre></body></html>


    Message 28


  • INDEX
  • Back to Main INDEX
  • PREVIOUS
  • Skip to PREVIOUS Message
  • NEXT
  • Skip to NEXT Message
  • LIST
  • Reply to LIST Regarding this Message
  • SENDER
  • Reply to SENDER Regarding this Message
    Time: 04:42:30 PM PST US
    From: Michael Perez <speedbrake@sbcglobal.net>
    Subject: Re: Update, non-Piet related
    Copy that! Is life good or what!? Michael Perez Karetaker Aero www.karetakeraero.com


    Message 29


  • INDEX
  • Back to Main INDEX
  • PREVIOUS
  • Skip to PREVIOUS Message
  • NEXT
  • Skip to NEXT Message
  • LIST
  • Reply to LIST Regarding this Message
  • SENDER
  • Reply to SENDER Regarding this Message
    Time: 05:12:40 PM PST US
    From: Jim Ash <ashcan@earthlink.net>
    Subject: Re: Update, non-Piet related
    That's just way cool. Congratulations. Jim Ash -----Original Message----- >From: Matthew VanDervort <matthew.vandervort@gmail.com> >Sent: Oct 13, 2011 7:08 PM >To: "pietenpol-list@matronics.com" <pietenpol-list@matronics.com> >Subject: Re: Pietenpol-List: Update, non-Piet related > >Pics.. For the real men.. Lol >


    Message 30


  • INDEX
  • Back to Main INDEX
  • PREVIOUS
  • Skip to PREVIOUS Message
  • NEXT
  • Skip to NEXT Message
  • LIST
  • Reply to LIST Regarding this Message
  • SENDER
  • Reply to SENDER Regarding this Message
    Time: 05:31:43 PM PST US
    From: "Jack Phillips" <pietflyr@bellsouth.net>
    Subject: Update, non-Piet related
    Man, what a DISH! You got her with a mere Taylorcraft? Think what you could have done with a Pietenpol! Do not archive Jack Phillips NX899JP Smith Mountain Lake, Virginia -----Original Message----- From: owner-pietenpol-list-server@matronics.com [mailto:owner-pietenpol-list-server@matronics.com] On Behalf Of Matthew VanDervort Sent: Thursday, October 13, 2011 7:09 PM Subject: Re: Pietenpol-List: Update, non-Piet related Pics.. For the real men.. Lol


    Message 31


  • INDEX
  • Back to Main INDEX
  • PREVIOUS
  • Skip to PREVIOUS Message
  • NEXT
  • Skip to NEXT Message
  • LIST
  • Reply to LIST Regarding this Message
  • SENDER
  • Reply to SENDER Regarding this Message
    Time: 05:33:38 PM PST US
    From: "Gboothe5" <gboothe5@comcast.net>
    Subject: Push Pull Elevator?
    Cover your eyes, Dan! Do not archive -----Original Message----- From: owner-pietenpol-list-server@matronics.com [mailto:owner-pietenpol-list-server@matronics.com] On Behalf Of skipgadd@earthlink.net Sent: Thursday, October 13, 2011 12:01 PM Subject: RE: Pietenpol-List: Push Pull Elevator? Also, has anyone run the rudder control horn below the elevator to give a more straight line to the rudder bar? Again mine is already built that way and it seems to me there will be allot of twisting action of the rudder if not mounted centered. Thanks in advance! > Chris Chris, Attached is how I did mine. I like it but it hasn't flown yet. Ski


    Message 32


  • INDEX
  • Back to Main INDEX
  • PREVIOUS
  • Skip to PREVIOUS Message
  • NEXT
  • Skip to NEXT Message
  • LIST
  • Reply to LIST Regarding this Message
  • SENDER
  • Reply to SENDER Regarding this Message
    Time: 05:56:36 PM PST US
    Subject: Re: Update, non-Piet related
    From: Ryan Mueller <rmueller23@gmail.com>
    Funny....my first thought upon finding a cute baby near an airplane is to call the authorities to get rid of it.....but I can't argue with your strategy, seemed to work out quite well. :) Ryan do not archive On Thu, Oct 13, 2011 at 5:44 PM, VanDy <matthew.vandervort@gmail.com> wrote: > matthew.vandervort@gmail.com> > > So it's been a long summer and I didn't get a darn thing done! But things > are looking up for the Pietenpol finally! Spent the majority of the summer > getting the t-craft up to par again, but I'll spare you those details, > finally managed a job with normal hours, GE aviation in evendale. So more > time for the Piet now! > > And some even better news, read close you single fella's!! > > First find a cute baby near an airplane.. > >


    Message 33


  • INDEX
  • Back to Main INDEX
  • PREVIOUS
  • Skip to PREVIOUS Message
  • NEXT
  • Skip to NEXT Message
  • LIST
  • Reply to LIST Regarding this Message
  • SENDER
  • Reply to SENDER Regarding this Message
    Time: 06:32:46 PM PST US
    Subject: Re: Update, non-Piet related
    From: "Kringle" <Mrkringles@msn.com>
    Congrats Matthew, glad to hear all the good news. John -------- John Read this topic online here: http://forums.matronics.com/viewtopic.php?p=354966#354966


    Message 34


  • INDEX
  • Back to Main INDEX
  • PREVIOUS
  • Skip to PREVIOUS Message
  • NEXT
  • Skip to NEXT Message
  • LIST
  • Reply to LIST Regarding this Message
  • SENDER
  • Reply to SENDER Regarding this Message
    Time: 09:09:42 PM PST US
    From: jorge lizarraga <flightwood@yahoo.com>
    Subject: Push Pull Elevator?2
    hi crist , these looks bery perfect to my let talk you some, afew year ago frien of my come to hanford ca, from woodlake arport in his pieten pol these fly like angel in the sky these have same rudder horn in the same position your my have in the same plase fly perfect your feel in your foot not to mouch presured need to aply . mosly piet fly whit the original disaignt but today mosly newone haved 50%modifications so lets duet and hapy wonderfull fly ,seyou in the sky jorge from hanford, --- On Thu, 10/13/11, skipgadd@earthlink.net <skipgadd@earthlink.net> wrote: From: skipgadd@earthlink.net <skipgadd@earthlink.net> Subject: RE: Pietenpol-List: Push Pull Elevator? Also, has anyone run the rudder control horn below the elevator to give a more straight line to the rudder bar? Again mine is already built that way and it seems to me there will be allot of twisting action of the rudder if not mounted centered. Thanks in advance! > Chris Chris, Attached is how I did mine. I like it but it hasn't flown yet. Ski




    Other Matronics Email List Services

  • Post A New Message
  •   pietenpol-list@matronics.com
  • UN/SUBSCRIBE
  •   http://www.matronics.com/subscription
  • List FAQ
  •   http://www.matronics.com/FAQ/Pietenpol-List.htm
  • Web Forum Interface To Lists
  •   http://forums.matronics.com
  • Matronics List Wiki
  •   http://wiki.matronics.com
  • 7-Day List Browse
  •   http://www.matronics.com/browse/pietenpol-list
  • Browse Pietenpol-List Digests
  •   http://www.matronics.com/digest/pietenpol-list
  • Browse Other Lists
  •   http://www.matronics.com/browse
  • Live Online Chat!
  •   http://www.matronics.com/chat
  • Archive Downloading
  •   http://www.matronics.com/archives
  • Photo Share
  •   http://www.matronics.com/photoshare
  • Other Email Lists
  •   http://www.matronics.com/emaillists
  • Contributions
  •   http://www.matronics.com/contribution

    These Email List Services are sponsored solely by Matronics and through the generous Contributions of its members.

    -- Please support this service by making your Contribution today! --