---------------------------------------------------------- Pietenpol-List Digest Archive --- Total Messages Posted Thu 10/13/11: 34 ---------------------------------------------------------- Today's Message Index: ---------------------- 1. 01:40 AM - Re: Is there nothing casein glue can't do? (flea) 2. 04:00 AM - Re: "He's a four-flusher, Mary Beth..." (helspersew@aol.com) 3. 04:08 AM - Re: How to contact a local Piet? (j_dunavin) 4. 04:09 AM - Re: How to contact a local Piet? (j_dunavin) 5. 04:19 AM - Re: New to List (Jerry Dotson) 6. 04:25 AM - Re: Update on Mike "Tools" Danford's Trek back to GA (Dale McCleskey) 7. 05:14 AM - Re: Update on Mike "Tools" Danford's Trek back to GA (tools) 8. 05:17 AM - Re: Update on Mike "Tools" Danford's Trek back to GA (tools) 9. 05:56 AM - Push Pull Elevator? (Chris Rusch) 10. 06:01 AM - Re: Holes in helmet box (Jack Phillips) 11. 06:33 AM - Re: "He's a four-flusher, Mary Beth..." (Gene Rambo) 12. 07:00 AM - Re: "He's a four-flusher, Mary Beth..." (helspersew@aol.com) 13. 07:07 AM - Re: New to List (Bryan Reed) 14. 07:08 AM - Re: Re: Is there nothing casein glue can't do? (Dan Yocum) 15. 08:16 AM - Re: Push Pull Elevator? (Barry Davis) 16. 09:18 AM - Re: Push Pull Elevator? (Jim Boyer) 17. 10:30 AM - Re: Push Pull Elevator? (Bill Church) 18. 11:20 AM - Re: Push Pull Elevator? (Charles Campbell) 19. 12:03 PM - Re: Push Pull Elevator? (skipgadd@earthlink.net) 20. 03:08 PM - Re: Update on Mike "Tools" Danford's Trek back to GA (tools) 21. 03:16 PM - Re: Re: Update on Mike "Tools" Danford's Trek back to GA (Jack Phillips) 22. 03:21 PM - Re: Re: Update on Mike "Tools" Danford's Trek back to GA (Ryan Mueller) 23. 03:26 PM - Re: Re: Update on Mike "Tools" Danford's Trek back to GA (Matthew VanDervort) 24. 03:31 PM - Re: Re: Update on Mike "Tools" Danford's Trek back to GA (Charles Campbell) 25. 03:46 PM - Update, non-Piet related (VanDy) 26. 03:47 PM - Re: Re: Update on Mike "Tools" Danford's Trek back to GA (helspersew@aol.com) 27. 04:12 PM - Re: Update, non-Piet related (Matthew VanDervort) 28. 04:42 PM - Re: Update, non-Piet related (Michael Perez) 29. 05:12 PM - Re: Update, non-Piet related (Jim Ash) 30. 05:31 PM - Re: Update, non-Piet related (Jack Phillips) 31. 05:33 PM - Re: Push Pull Elevator? (Gboothe5) 32. 05:56 PM - Re: Update, non-Piet related (Ryan Mueller) 33. 06:32 PM - Re: Update, non-Piet related (Kringle) 34. 09:09 PM - Re: Push Pull Elevator?2 (jorge lizarraga) ________________________________ Message 1 _____________________________________ Time: 01:40:38 AM PST US Subject: Pietenpol-List: Re: Is there nothing casein glue can't do? From: "flea" yocum137 wrote: > > > At least I'm not on 24x7 pager duty, this week. > > -- Does anyone still use pagers? Seems like a waste to archive, so don't do it. Read this topic online here: http://forums.matronics.com/viewtopic.php?p=354902#354902 ________________________________ Message 2 _____________________________________ Time: 04:00:26 AM PST US Subject: Re: Pietenpol-List: "He's a four-flusher, Mary Beth..." From: helspersew@aol.com Gene Rambo, I can't believe you're not more excited about the nickname you have come up with for your Piet, that I revealed to the list last week. You know, the o ne you'll paint on to the cowl? Dan Helsper Puryear, TN do not archive -----Original Message----- From: Gene Rambo Sent: Wed, Oct 12, 2011 7:50 pm Subject: RE: Pietenpol-List: "He's a four-flusher, Mary Beth..." I responded to you, Dan. I am here, waiting for signs of intelligent life. Gene do not archive Subject: Re: Pietenpol-List: "He's a four-flusher, Mary Beth..." From: helspersew@aol.com Finally, I am getting some some empathy from this group. Dan Helsper Puryear, TN do not archive PS. I have not been able to raise Gene Rambo. Are you out there? -----Original Message----- From: Douwe Blumberg Sent: Wed, Oct 12, 2011 7:20 am Subject: Pietenpol-List: "He's a four-flusher, Mary Beth..." HEY, WAIT JUST ONE DOGGON (SP?) MINUTE!!! For the record =9CRe-Piet=9D has been painted on my wings for c lose to a year and now Gardiner is gonna swipe it my name just like Gene Ra mbo did with Dan=99s paint scheme. (Now I understand your paint and a ngst Dan) Wow, is there no shame or humanity left in this world? All in jest, Gardiner, name her what you like, you will have earned it at t hat point, but to avoid confusion, maybe =9Crepiet II=9D?? Douwe Do not archive " target=_blank>http://www.matronics.com/Navigator?Pietenpol-List ://forums.matronics.com lank>http://www.matronics.com/contribution st" target="_blank">http://www.matronics.com/Navigator?Pietenpol-List ttp://forums.matronics.com "_blank">http://www.matronics.com/contribution -= - The Pietenpol-List Email Forum - -= Use the Matronics List Features Navigator to browse -= the many List utilities such as List Un/Subscription, -= Archive Search & Download, 7-Day Browse, Chat, FAQ, -= Photoshare, and much much more: - -= --> http://www.matronics.com/Navigator?Pietenpol-List - -======================== -= - MATRONICS WEB FORUMS - -= Same great content also available via the Web Forums! - -= --> http://forums.matronics.com - -======================== -= - List Contribution Web Site - -= Thank you for your generous support! -= -Matt Dralle, List Admin. -= --> http://www.matronics.com/contribution -======================== ________________________________ Message 3 _____________________________________ Time: 04:08:32 AM PST US Subject: Pietenpol-List: Re: How to contact a local Piet? From: "j_dunavin" I think that my boy and I will make our way over to the airport and check in with the guys over there. Give them my business card and ask them to give it to Tim. Besides there is a T-38 gate guard over there that he really likes to see. Read this topic online here: http://forums.matronics.com/viewtopic.php?p=354906#354906 ________________________________ Message 4 _____________________________________ Time: 04:09:08 AM PST US Subject: Pietenpol-List: Re: How to contact a local Piet? From: "j_dunavin" I think that my boy and I will make our way over to the airport and check in with the guys over there. Give them my business card and ask them to give it to Tim. Besides there is a T-38 gate guard over there that he really likes to see. Read this topic online here: http://forums.matronics.com/viewtopic.php?p=354907#354907 ________________________________ Message 5 _____________________________________ Time: 04:19:48 AM PST US Subject: Pietenpol-List: Re: New to List From: "Jerry Dotson" I took the Aircraft Spruce route and bought all the wood from them. I would do it again. I didn't have any scraps from poor quality wood. Not 1 piece. The spars and longerons were perfect and beautiful. I picked up my order at the Atlanta store. I toured the wood warehouse/mill shop. It was very impressive. do not archive -------- Jerry Dotson 59 Daniel Johnson Rd Baker, FL 32531 Started building NX510JD July, 2009 now covering 21" wheels Lycoming O-235 C 2C Jay Anderson CloudCars prop 76 X 44 Read this topic online here: http://forums.matronics.com/viewtopic.php?p=354908#354908 ________________________________ Message 6 _____________________________________ Time: 04:25:45 AM PST US Subject: Pietenpol-List: Re: Update on Mike "Tools" Danford's Trek back to GA From: "Dale McCleskey" Glad you made it home. Wanna hear the story sometime. And now I've got an excuse to fly south some spring day. Congrats on the Piet. -------- Dale McCleskey N7035N Read this topic online here: http://forums.matronics.com/viewtopic.php?p=354910#354910 ________________________________ Message 7 _____________________________________ Time: 05:14:54 AM PST US Subject: Pietenpol-List: Re: Update on Mike "Tools" Danford's Trek back to GA From: "tools" Hey Dale! Sorry I missed you. Scott and I left our little "ditty" bag in Paxton (somewhere, IL?) with our phone charger, my wallet, corporate ID, SNACKS, stuff like that. So we had to make the MOST of our phone batteries and had them off unless necessary. Didn't get through Lebanon until yesterday afternoon, a short stop and then south while the weather was good. As it turned out, weather was JUST good enough to be non stressful, legal AND safe (so there were other moments earlier in the day...) so the last leg went well. Ran across a mechanic (the guy who helped you with the oil pressure gage in your piet before Brodhead) who knew you! He taught us how to prop it from behind and was kind enough to give us a prop getting out. This whole genre of flying is absolutely NOTHING like anything I've ever done before. It's damn challenging! Incredibly rewarding and really made this a life event. This was essentially my son's 18th birthday present. Hmmm, maybe my present... I've got to sit down and take notes, try to tag the pictures before memories slip away. We've definitely got plans to bring it back to Brodhead and Oshkosh next year. Thanks to all the offers for help and support along the way. Wild how I practically missed every planned stop, but really found some neat places along the way. Spending the night in Brodhead was really neat. We sat out there alone in the dark and made a little campfire. It was pretty cool. Time to get busy around here, I'll fill in on details later! Cheers, Tools Read this topic online here: http://forums.matronics.com/viewtopic.php?p=354914#354914 ________________________________ Message 8 _____________________________________ Time: 05:17:04 AM PST US Subject: Pietenpol-List: Re: Update on Mike "Tools" Danford's Trek back to GA From: "tools" Oh ya Dale, I was definitely thinking of flying back up or inviting you down (or both). I flew over some really neat little field (I think I "tagged" it with my GPS) about half way that is a base for hunting lodges or something. That might be pretty cool. The Piet really draws a lot of attention where ever it goes, that was a lot of fun as well. Tools Read this topic online here: http://forums.matronics.com/viewtopic.php?p=354915#354915 ________________________________ Message 9 _____________________________________ Time: 05:56:20 AM PST US Subject: Pietenpol-List: Push Pull Elevator? From: "Chris Rusch" I am wondering if anyone has detailed pictures of the "BIg" Piets push pull elevator setups? i saw them at EAA and would like to study the design. The piet i am finishing has a push pull set up already in it, i would just like to compare the designs. Also, has anyone run the rudder control horn below the elevator to give a more straight line to the rudder bar? Again mine is already built that way and it seems to me there will be allot of twisting action of the rudder if not mounted centered. Thanks in advance! Chris Read this topic online here: http://forums.matronics.com/viewtopic.php?p=354917#354917 ________________________________ Message 10 ____________________________________ Time: 06:01:29 AM PST US From: "Jack Phillips" Subject: RE: Pietenpol-List: Holes in helmet box Hi Dan, Those are just vent holes to allow moisture to dry out. Jack Phillips NX899JP Smith Mountain Lake, Virginia _____ From: owner-pietenpol-list-server@matronics.com [mailto:owner-pietenpol-list-server@matronics.com] On Behalf Of helspersew@aol.com Sent: Wednesday, October 12, 2011 8:20 AM Subject: Pietenpol-List: Holes in helmet box Hey Jack Phillips, I was admiring the photo of your radio set-up in your center section. What is the purpose of those small holes in the underside of the helmet box? Dan Helsper Puryear, TN ________________________________ Message 11 ____________________________________ Time: 06:33:50 AM PST US Subject: Re: Pietenpol-List: "He's a four-flusher, Mary Beth..." From: Gene Rambo What? My unique black and yellow scheme with "Re-Piet" on the cowl and "G. O wen Loensloe" on the fuselage? Gene Rambo Sent from my iPhone On Oct 13, 2011, at 6:57 AM, helspersew@aol.com wrote: > Gene Rambo, > > I can't believe you're not more excited about the nickname you have come u p with for your Piet, that I revealed to the list last week. You know, the o ne you'll paint on to the cowl? > > Dan Helsper > Puryear, TN > > do not archive > > > -----Original Message----- > From: Gene Rambo > To: pietenpol-list > Sent: Wed, Oct 12, 2011 7:50 pm > Subject: RE: Pietenpol-List: "He's a four-flusher, Mary Beth..." > > I responded to you, Dan. I am here, waiting for signs of intelligent life .. > > Gene > > do not archive > > To: pietenpol-list@matronics.com > Subject: Re: Pietenpol-List: "He's a four-flusher, Mary Beth..." > From: helspersew@aol.com > Date: Wed, 12 Oct 2011 08:37:04 -0400 > > Finally, I am getting some some empathy from this group. > > Dan Helsper > Puryear, TN > > do not archive > > PS. I have not been able to raise Gene Rambo. Are you out there? > > > -----Original Message----- > From: Douwe Blumberg > To: pietenpolgroup > Sent: Wed, Oct 12, 2011 7:20 am > Subject: Pietenpol-List: "He's a four-flusher, Mary Beth..." > > HEY, WAIT JUST ONE DOGGON (SP?) MINUTE!!! > > For the record =9CRe-Piet=9D has been painted on my wings for c lose to a year and now Gardiner is gonna swipe it my name just like Gene Ram bo did with Dan=99s paint scheme. (Now I understand your paint and ang st Dan) Wow, is there no shame or humanity left in this world? > > All in jest, Gardiner, name her what you like, you will have earned it at t hat point, but to avoid confusion, maybe =9Crepiet II=9D?? > > Douwe > > Do not archive > > > " target=_blank>http://www.matronics.com/Navigator?Pietenpol-List > p://forums.matronics.com > blank>http://www.matronics.com/contribution > > > > st" target="_blank">http://www.matronics.com/Navigator?Pietenpol-List > http://forums.matronics.com > ="_blank">http://www.matronics.com/contribution > > > > " target=_blank>http://www.matronics.com/Navigator?Pietenpol-List > p://forums.matronics.com > blank>http://www.matronics.com/contribution > > > ========================== ========= ========================== ========= ========================== ========= ========================== ========= > ________________________________ Message 12 ____________________________________ Time: 07:00:08 AM PST US Subject: Re: Pietenpol-List: "He's a four-flusher, Mary Beth..." From: helspersew@aol.com No, you told me last week that it would be "CopyT". Dan Helsper Puryear, TN do not archive -----Original Message----- From: Gene Rambo Sent: Thu, Oct 13, 2011 8:34 am Subject: Re: Pietenpol-List: "He's a four-flusher, Mary Beth..." What? My unique black and yellow scheme with "Re-Piet" on the cowl and "G. Owen Loensloe" on the fuselage? Gene Rambo Sent from my iPhone On Oct 13, 2011, at 6:57 AM, helspersew@aol.com wrote: Gene Rambo, I can't believe you're not more excited about the nickname you have come up with for your Piet, that I revealed to the list last week. You know, the o ne you'll paint on to the cowl? Dan Helsper Puryear, TN do not archive -----Original Message----- From: Gene Rambo Sent: Wed, Oct 12, 2011 7:50 pm Subject: RE: Pietenpol-List: "He's a four-flusher, Mary Beth..." I responded to you, Dan. I am here, waiting for signs of intelligent life. Gene do not archive Subject: Re: Pietenpol-List: "He's a four-flusher, Mary Beth..." From: helspersew@aol.com Finally, I am getting some some empathy from this group. Dan Helsper Puryear, TN do not archive PS. I have not been able to raise Gene Rambo. Are you out there? -----Original Message----- From: Douwe Blumberg Sent: Wed, Oct 12, 2011 7:20 am Subject: Pietenpol-List: "He's a four-flusher, Mary Beth..." HEY, WAIT JUST ONE DOGGON (SP?) MINUTE!!! For the record =9CRe-Piet=9D has been painted on my wings for c lose to a year and now Gardiner is gonna swipe it my name just like Gene Ra mbo did with Dan=99s paint scheme. (Now I understand your paint and a ngst Dan) Wow, is there no shame or humanity left in this world? All in jest, Gardiner, name her what you like, you will have earned it at t hat point, but to avoid confusion, maybe =9Crepiet II=9D?? Douwe Do not archive " target=_blank>http://www.matronics.com/Navigator?Pietenpol-List ://forums.matronics.com lank>http://www.matronics.com/contribution st" target="_blank">http://www.matronics.com/Navigator?Pietenpol-List ttp://forums.matronics.com "_blank">http://www.matronics.com/contribution " target=_blank>http://www.matronics.com/Navigator?Pietenpol-List ://forums.matronics.com lank>http://www.matronics.com/contribution ========= http://www.matronics.com/Navigator?Pietenpol-List ======== forums.matronics.com">http://forums.matronics.com ======== "http://www.matronics.com/contribution">;http://www.matronics.com/contribut ion ======== -= - The Pietenpol-List Email Forum - -= Use the Matronics List Features Navigator to browse -= the many List utilities such as List Un/Subscription, -= Archive Search & Download, 7-Day Browse, Chat, FAQ, -= Photoshare, and much much more: - -= --> http://www.matronics.com/Navigator?Pietenpol-List - -======================== -= - MATRONICS WEB FORUMS - -= Same great content also available via the Web Forums! - -= --> http://forums.matronics.com - -======================== -= - List Contribution Web Site - -= Thank you for your generous support! -= -Matt Dralle, List Admin. -= --> http://www.matronics.com/contribution -======================== ________________________________ Message 13 ____________________________________ Time: 07:07:24 AM PST US Subject: Pietenpol-List: Re: New to List From: "Bryan Reed" I want to thank all for the welcome and loads of tips and good information. I apologize if I did not respond to all posts as time has been hard to find this week. I did indeed read all of them. Unfortunately, I am still cursed as a working man and with one in college my work load must still remain high. I am envious to those that have more free time. Actually I am "VERY" envious to those that are lucky enough to fly off all those beautiful grass strips. I only had the pleasure to do so once and it was like landing on carpet. Since I am not a devious man I will "attempt" to refrain from comments on the beautiful spring-like weather we will have for the next 6-months while many of you endure the harsh coming months. : ) I will full well expect the comments regarding our heat here in Arizona for the months of July and August but alas would not want to trade my 2 for your 6. : ) Cheers to all and CAVU, Bryan -------- While I may not always be right, I apologize well. Read this topic online here: http://forums.matronics.com/viewtopic.php?p=354924#354924 ________________________________ Message 14 ____________________________________ Time: 07:08:16 AM PST US From: Dan Yocum Subject: Re: Pietenpol-List: Re: Is there nothing casein glue can't do? On 10/13/2011 03:37 AM, flea wrote: > --> Pietenpol-List message posted by: "flea" > > > yocum137 wrote: >> >> >> At least I'm not on 24x7 pager duty, this week. Oh, don't even get me started... By the way, the system is trained specifically to not archive a message only if it sees the following string, verbatim: do not archive -- Dan Yocum Fermilab 630.840.6509 yocum@fnal.gov, http://fermigrid.fnal.gov "I fly because it releases my mind from the tyranny of petty things." ________________________________ Message 15 ____________________________________ Time: 08:16:27 AM PST US From: "Barry Davis" Subject: RE: Pietenpol-List: Push Pull Elevator? I'll send you some pictures Barry Big Piet NX973BP -----Original Message----- From: owner-pietenpol-list-server@matronics.com [mailto:owner-pietenpol-list-server@matronics.com] On Behalf Of Chris Rusch Sent: Thursday, October 13, 2011 8:54 AM Subject: Pietenpol-List: Push Pull Elevator? --> I am wondering if anyone has detailed pictures of the "BIg" Piets push pull elevator setups? i saw them at EAA and would like to study the design. The piet i am finishing has a push pull set up already in it, i would just like to compare the designs. Also, has anyone run the rudder control horn below the elevator to give a more straight line to the rudder bar? Again mine is already built that way and it seems to me there will be allot of twisting action of the rudder if not mounted centered. Thanks in advance! Chris Read this topic online here: http://forums.matronics.com/viewtopic.php?p=354917#354917 ________________________________ Message 16 ____________________________________ Time: 09:18:05 AM PST US From: Jim Boyer Subject: Re: Pietenpol-List: Push Pull Elevator? Hi Barry, Can you put them on line? It seems like that might be a popular change to the Piet. Thanks, Jim B. do not archive ________________________________ Message 17 ____________________________________ Time: 10:30:07 AM PST US Subject: Pietenpol-List: Re: Push Pull Elevator? From: "Bill Church" Chris, When it comes to the Pietenpol, just about EVERY idea has been tried at least once - well, except some of Michael Perez's ideas... :) . Just kidding, Michael. The lowered rudder horn is one of the modifications commonly done in the UK. In order to compensate for the torsion imposed on the rudder, the structure gets beefed up, as indicated in the attached, poor image quality sketch. Bill C. Read this topic online here: http://forums.matronics.com/viewtopic.php?p=354932#354932 Attachments: http://forums.matronics.com//files/rudder_mod_107.jpg ________________________________ Message 18 ____________________________________ Time: 11:20:21 AM PST US From: "Charles Campbell" Subject: Re: Pietenpol-List: Push Pull Elevator? Chris, the GN-1 plans show the rudder horn below the elevators but the bottom of the rudder is beefed up pretty well. Pobably adds a bit of weight but I think it's worth it-- I'm doing my rudder that way. I just don't like the looks of the rudder cables going up above the stab/elev. C ----- Original Message ----- From: "Chris Rusch" Sent: Thursday, October 13, 2011 8:54 AM Subject: Pietenpol-List: Push Pull Elevator? > > > I am wondering if anyone has detailed pictures of the "BIg" Piets push > pull elevator setups? i saw them at EAA and would like to study the > design. The piet i am finishing has a push pull set up already in it, i > would just like to compare the designs. Also, has anyone run the rudder > control horn below the elevator to give a more straight line to the rudder > bar? Again mine is already built that way and it seems to me there will be > allot of twisting action of the rudder if not mounted centered. Thanks in > advance! > Chris > > > Read this topic online here: > > http://forums.matronics.com/viewtopic.php?p=354917#354917 > > > ________________________________ Message 19 ____________________________________ Time: 12:03:48 PM PST US From: "skipgadd@earthlink.net" Subject: RE: Pietenpol-List: Push Pull Elevator? Also, has anyone run the rudder control horn below the elevator to give a more straight line to the rudder bar? Again mine is already built that way and it seems to me there will be allot of twisting action of the rudder if not mounted centered. Thanks in advance! > Chris Chris, Attached is how I did mine. I like it but it hasn't flown yet. Ski ________________________________ Message 20 ____________________________________ Time: 03:08:42 PM PST US Subject: Pietenpol-List: Re: Update on Mike "Tools" Danford's Trek back to GA From: "tools" Here's some highlights: My copilot: Scott enjoying a little taxiing fam: A campfire.... Fully a quarter of the trip below 500 feet, awesome, but... Some was higher... This picture just doesn't do justice to the fall foliage: One very happy dad, new Piet owner and flyer, and happy to be there! Tools Read this topic online here: http://forums.matronics.com/viewtopic.php?p=354947#354947 ________________________________ Message 21 ____________________________________ Time: 03:16:28 PM PST US From: "Jack Phillips" Subject: RE: Pietenpol-List: Re: Update on Mike "Tools" Danford's Trek back to GA No pictures visible. Were they supposed to be? Jack Phillips NX899JP Smith Mountain Lake, Virginia -----Original Message----- From: owner-pietenpol-list-server@matronics.com [mailto:owner-pietenpol-list-server@matronics.com] On Behalf Of tools Sent: Thursday, October 13, 2011 6:06 PM Subject: Pietenpol-List: Re: Update on Mike "Tools" Danford's Trek back to GA Here's some highlights: My copilot: Scott enjoying a little taxiing fam: A campfire.... Fully a quarter of the trip below 500 feet, awesome, but... Some was higher... This picture just doesn't do justice to the fall foliage: One very happy dad, new Piet owner and flyer, and happy to be there! Tools Read this topic online here: http://forums.matronics.com/viewtopic.php?p=354947#354947 ________________________________ Message 22 ____________________________________ Time: 03:21:39 PM PST US Subject: Re: Pietenpol-List: Re: Update on Mike "Tools" Danford's Trek back to GA From: Ryan Mueller Matronics stripped them out of the email (ya know, the way real men read this *mailing list*). If you click on the forum link at the bottom you can see them... Ryan do not archive On Thu, Oct 13, 2011 at 5:13 PM, Jack Phillips wrote: > pietflyr@bellsouth.net> > > No pictures visible. Were they supposed to be? > > Jack Phillips > NX899JP > Smith Mountain Lake, Virginia > > -----Original Message----- > From: owner-pietenpol-list-server@matronics.com > [mailto:owner-pietenpol-list-server@matronics.com] On Behalf Of tools > Sent: Thursday, October 13, 2011 6:06 PM > To: pietenpol-list@matronics.com > Subject: Pietenpol-List: Re: Update on Mike "Tools" Danford's Trek back to > GA > > > Here's some highlights: > > My copilot: > > > Scott enjoying a little taxiing fam: > > > A campfire.... > > > Fully a quarter of the trip below 500 feet, awesome, but... > > > Some was higher... > > > This picture just doesn't do justice to the fall foliage: > > > One very happy dad, new Piet owner and flyer, and happy to be there! > > > Tools > > > Read this topic online here: > > http://forums.matronics.com/viewtopic.php?p=354947#354947 > > ________________________________ Message 23 ____________________________________ Time: 03:26:17 PM PST US From: Matthew VanDervort Subject: Re: Pietenpol-List: Re: Update on Mike "Tools" Danford's Trek back to GA I had to go to the actual matronics site to see them, great pics!! Sent from my iPhone On Oct 13, 2011, at 6:13 PM, "Jack Phillips" wrote: > > No pictures visible. Were they supposed to be? > > Jack Phillips > NX899JP > Smith Mountain Lake, Virginia > > -----Original Message----- > From: owner-pietenpol-list-server@matronics.com > [mailto:owner-pietenpol-list-server@matronics.com] On Behalf Of tools > Sent: Thursday, October 13, 2011 6:06 PM > To: pietenpol-list@matronics.com > Subject: Pietenpol-List: Re: Update on Mike "Tools" Danford's Trek back to > GA > > > Here's some highlights: > > My copilot: > > > Scott enjoying a little taxiing fam: > > > A campfire.... > > > Fully a quarter of the trip below 500 feet, awesome, but... > > > Some was higher... > > > This picture just doesn't do justice to the fall foliage: > > > One very happy dad, new Piet owner and flyer, and happy to be there! > > > Tools > > > > > Read this topic online here: > > http://forums.matronics.com/viewtopic.php?p=354947#354947 > > > > > > > > > > > > > > ________________________________ Message 24 ____________________________________ Time: 03:31:23 PM PST US From: "Charles Campbell" Subject: Re: Pietenpol-List: Re: Update on Mike "Tools" Danford's Trek back to GA Jack, go to the matronics forum page -- the pics are there. C ----- Original Message ----- From: "Jack Phillips" Sent: Thursday, October 13, 2011 6:13 PM Subject: RE: Pietenpol-List: Re: Update on Mike "Tools" Danford's Trek back to GA > > > No pictures visible. Were they supposed to be? > > Jack Phillips > NX899JP > Smith Mountain Lake, Virginia > > -----Original Message----- > From: owner-pietenpol-list-server@matronics.com > [mailto:owner-pietenpol-list-server@matronics.com] On Behalf Of tools > Sent: Thursday, October 13, 2011 6:06 PM > To: pietenpol-list@matronics.com > Subject: Pietenpol-List: Re: Update on Mike "Tools" Danford's Trek back to > GA > > > Here's some highlights: > > My copilot: > > > Scott enjoying a little taxiing fam: > > > A campfire.... > > > Fully a quarter of the trip below 500 feet, awesome, but... > > > Some was higher... > > > This picture just doesn't do justice to the fall foliage: > > > One very happy dad, new Piet owner and flyer, and happy to be there! > > > Tools > > > Read this topic online here: > > http://forums.matronics.com/viewtopic.php?p=354947#354947 > > > ________________________________ Message 25 ____________________________________ Time: 03:46:27 PM PST US Subject: Pietenpol-List: Update, non-Piet related From: "VanDy" So it's been a long summer and I didn't get a darn thing done! But things are looking up for the Pietenpol finally! Spent the majority of the summer getting the t-craft up to par again, but I'll spare you those details, finally managed a job with normal hours, GE aviation in evendale. So more time for the Piet now! And some even better news, read close you single fella's!! First find a cute baby near an airplane.. Then find a cute girl to hold said baby for an airplane ride Teach the baby to fly Then have an awesome brother inlaw paint his yard so you can ask her to marry you! And she said yes :) Do not archive unless you need it for future reference -------- www.vansaviation.com follow my Piet rebuild there! almost dissasembled, getting ready to order all AN hardware and SS cable Read this topic online here: http://forums.matronics.com/viewtopic.php?p=354953#354953 ________________________________ Message 26 ____________________________________ Time: 03:47:26 PM PST US Subject: Re: Pietenpol-List: Re: Update on Mike "Tools" Danford's Trek back to GA From: helspersew@aol.com Mike: Simply awesome. Wow. Very cool. Congratulations to you and your son. Dan Helsper Puryear, TN do not archive -----Original Message----- From: tools Sent: Thu, Oct 13, 2011 5:08 pm Subject: Pietenpol-List: Re: Update on Mike "Tools" Danford's Trek back to GA Here's some highlights: My copilot: cott enjoying a little taxiing fam: campfire.... ully a quarter of the trip below 500 feet, awesome, but... ome was higher... his picture just doesn't do justice to the fall foliage: ne very happy dad, new Piet owner and flyer, and happy to be there! ools ead this topic online here: http://forums.matronics.com/viewtopic.php?p=354947#354947 -= - The Pietenpol-List Email Forum - -= Use the Matronics List Features Navigator to browse -= the many List utilities such as List Un/Subscription, -= Archive Search & Download, 7-Day Browse, Chat, FAQ, -= Photoshare, and much much more: - -= --> http://www.matronics.com/Navigator?Pietenpol-List - -======================== -= - MATRONICS WEB FORUMS - -= Same great content also available via the Web Forums! - -= --> http://forums.matronics.com - -======================== -= - List Contribution Web Site - -= Thank you for your generous support! -= -Matt Dralle, List Admin. -= --> http://www.matronics.com/contribution -======================== ________________________________ Message 27 ____________________________________ Time: 04:12:34 PM PST US Subject: Re: Pietenpol-List: Update, non-Piet related From: Matthew VanDervort Pics.. For the real men.. Lol Zoom in on grass Back to your regular Piet broadcasting! Do not archive Sent from my iPhone On Oct 13, 2011, at 6:44 PM, "VanDy" wrote: m> > > So it's been a long summer and I didn't get a darn thing done! But things are looking up for the Pietenpol finally! Spent the majority of the summer getting the t-craft up to par again, but I'll spare you those details, fina lly managed a job with normal hours, GE aviation in evendale. So more time f or the Piet now! > > And some even better news, read close you single fella's!! > > First find a cute baby near an airplane.. > > > > Then find a cute girl to hold said baby for an airplane ride > > > Teach the baby to fly > > > > Then have an awesome brother inlaw paint his yard so you can ask her to ma rry you! > > > > And she said yes :) > > Do not archive unless you need it for future reference > > -------- > www.vansaviation.com follow my Piet rebuild there! > > almost dissasembled, getting ready to order all AN hardware and SS cable > > > > > Read this topic online here: > > http://forums.matronics.com/viewtopic.php?p=354953#354953 > > > > > > > ========================== ========= ========================== ========= ========================== ========= ========================== ========= > > >
________________________________ Message 28 ____________________________________ Time: 04:42:30 PM PST US From: Michael Perez Subject: Re: Pietenpol-List: Update, non-Piet related Copy that! Is life good or what!? Michael Perez Karetaker Aero www.karetakeraero.com ________________________________ Message 29 ____________________________________ Time: 05:12:40 PM PST US From: Jim Ash Subject: Re: Pietenpol-List: Update, non-Piet related That's just way cool. Congratulations. Jim Ash -----Original Message----- >From: Matthew VanDervort >Sent: Oct 13, 2011 7:08 PM >To: "pietenpol-list@matronics.com" >Subject: Re: Pietenpol-List: Update, non-Piet related > >Pics.. For the real men.. Lol > ________________________________ Message 30 ____________________________________ Time: 05:31:43 PM PST US From: "Jack Phillips" Subject: RE: Pietenpol-List: Update, non-Piet related Man, what a DISH! You got her with a mere Taylorcraft? Think what you could have done with a Pietenpol! Do not archive Jack Phillips NX899JP Smith Mountain Lake, Virginia -----Original Message----- From: owner-pietenpol-list-server@matronics.com [mailto:owner-pietenpol-list-server@matronics.com] On Behalf Of Matthew VanDervort Sent: Thursday, October 13, 2011 7:09 PM Subject: Re: Pietenpol-List: Update, non-Piet related Pics.. For the real men.. Lol ________________________________ Message 31 ____________________________________ Time: 05:33:38 PM PST US From: "Gboothe5" Subject: RE: Pietenpol-List: Push Pull Elevator? Cover your eyes, Dan! Do not archive -----Original Message----- From: owner-pietenpol-list-server@matronics.com [mailto:owner-pietenpol-list-server@matronics.com] On Behalf Of skipgadd@earthlink.net Sent: Thursday, October 13, 2011 12:01 PM Subject: RE: Pietenpol-List: Push Pull Elevator? Also, has anyone run the rudder control horn below the elevator to give a more straight line to the rudder bar? Again mine is already built that way and it seems to me there will be allot of twisting action of the rudder if not mounted centered. Thanks in advance! > Chris Chris, Attached is how I did mine. I like it but it hasn't flown yet. Ski ________________________________ Message 32 ____________________________________ Time: 05:56:36 PM PST US Subject: Re: Pietenpol-List: Update, non-Piet related From: Ryan Mueller Funny....my first thought upon finding a cute baby near an airplane is to call the authorities to get rid of it.....but I can't argue with your strategy, seemed to work out quite well. :) Ryan do not archive On Thu, Oct 13, 2011 at 5:44 PM, VanDy wrote: > matthew.vandervort@gmail.com> > > So it's been a long summer and I didn't get a darn thing done! But things > are looking up for the Pietenpol finally! Spent the majority of the summer > getting the t-craft up to par again, but I'll spare you those details, > finally managed a job with normal hours, GE aviation in evendale. So more > time for the Piet now! > > And some even better news, read close you single fella's!! > > First find a cute baby near an airplane.. > > ________________________________ Message 33 ____________________________________ Time: 06:32:46 PM PST US Subject: Pietenpol-List: Re: Update, non-Piet related From: "Kringle" Congrats Matthew, glad to hear all the good news. John -------- John Read this topic online here: http://forums.matronics.com/viewtopic.php?p=354966#354966 ________________________________ Message 34 ____________________________________ Time: 09:09:42 PM PST US From: jorge lizarraga Subject: RE: Pietenpol-List: Push Pull Elevator?2 hi crist , these looks bery perfect to my let talk you some, afew year ago frien of my come to hanford ca, from woodlake arport in his pieten pol these fly like angel in the sky these have same rudder horn in the same position your my have in the same plase fly perfect your feel in your foot not to mouch presured need to aply . mosly piet fly whit the original disaignt but today mosly newone haved 50%modifications so lets duet and hapy wonderfull fly ,seyou in the sky jorge from hanford, --- On Thu, 10/13/11, skipgadd@earthlink.net wrote: From: skipgadd@earthlink.net Subject: RE: Pietenpol-List: Push Pull Elevator? Also, has anyone run the rudder control horn below the elevator to give a more straight line to the rudder bar? Again mine is already built that way and it seems to me there will be allot of twisting action of the rudder if not mounted centered. Thanks in advance! > Chris Chris, Attached is how I did mine. I like it but it hasn't flown yet. Ski ------------------------------------------------------------------------------------- Other Matronics Email List Services ------------------------------------------------------------------------------------- Post A New Message pietenpol-list@matronics.com UN/SUBSCRIBE http://www.matronics.com/subscription List FAQ http://www.matronics.com/FAQ/Pietenpol-List.htm Web Forum Interface To Lists http://forums.matronics.com Matronics List Wiki http://wiki.matronics.com Full Archive Search Engine http://www.matronics.com/search 7-Day List Browse http://www.matronics.com/browse/pietenpol-list Browse Digests http://www.matronics.com/digest/pietenpol-list Browse Other Lists http://www.matronics.com/browse Live Online Chat! http://www.matronics.com/chat Archive Downloading http://www.matronics.com/archives Photo Share http://www.matronics.com/photoshare Other Email Lists http://www.matronics.com/emaillists Contributions http://www.matronics.com/contribution ------------------------------------------------------------------------------------- These Email List Services are sponsored solely by Matronics and through the generous Contributions of its members.