---------------------------------------------------------- Pietenpol-List Digest Archive --- Total Messages Posted Tue 03/13/12: 27 ---------------------------------------------------------- Today's Message Index: ---------------------- 1. 12:16 AM - Re: Of electronics and banjos (Clif Dawson) 2. 05:20 AM - Re: Of electronics and banjos (bender) 3. 05:34 AM - Re: Of electronics and banjos (Jerry Dotson) 4. 06:16 AM - dimple (airlion) 5. 06:41 AM - Re: dimple (Jack@textors.com) 6. 09:08 AM - Corvair College 22 (kevinpurtee) 7. 09:44 AM - Re: SunNFun plans (Barry Davis) 8. 09:48 AM - Re: SunNFun plans (SKIP GADD) 9. 10:23 AM - Re: CONTACT!!!!!! (Billy McCaskill) 10. 10:39 AM - Re: Corvair College 22 (K5YAC) 11. 10:39 AM - Re: dimple (airlion) 12. 11:09 AM - Re: Corvair College 22 (Bill Church) 13. 11:25 AM - short video of Douwe's first engine run! (Cuy, Michael D. (GRC-RXD0)[ASRC AEROSPACE CORP]) 14. 11:58 AM - First Composite Pedal Kitplane (Creative Eagles Corp) 15. 12:02 PM - what dedication....holy moly (Cuy, Michael D. (GRC-RXD0)[ASRC AEROSPACE CORP]) 16. 12:09 PM - Continental C85-12 0-SMOH "For Sale" (brian.e.jardine@l-3com.com) 17. 12:43 PM - Re: what dedication....holy moly (kevinpurtee) 18. 01:47 PM - Wire Wheels (indyaquanaut) 19. 02:17 PM - Re: Wire Wheels (Jim Markle) 20. 02:25 PM - a better linke..... Wire Wheels (Jim Markle) 21. 04:07 PM - Re: Re: Corvair College 22 (Gboothe5) 22. 04:07 PM - Re: Wire Wheels (Gboothe5) 23. 05:05 PM - Re: Wire Wheels (Bill Church) 24. 05:10 PM - Brodhead plans (Mark Baxter) 25. 05:41 PM - Re: Wire Wheels (Dave Millikan) 26. 07:26 PM - You Tube link to Douwe's C-90 First Run-up in Airframe (Douwe Blumberg) 27. 09:52 PM - Re: Re: Wire Wheels (Ken Bickers) ________________________________ Message 1 _____________________________________ Time: 12:16:52 AM PST US From: "Clif Dawson" Subject: Re: Pietenpol-List: Of electronics and banjos Jealousy. :-) http://www.youtube.com/watch?v=lKK_n4Ac0Bk&feature=related Clif Dem's da brakes! I wonder why there are so many jokes about banjos and banjo players? Jack Phillips ________________________________ Message 2 _____________________________________ Time: 05:20:52 AM PST US Subject: Pietenpol-List: Re: Of electronics and banjos From: "bender" If you drop a banjo player and a guitar from a plane.. Which one hits the ground first... The guitar player.....the banjo player has to stop and tune Jeff Do not archive Read this topic online here: http://forums.matronics.com/viewtopic.php?p=368340#368340 ________________________________ Message 3 _____________________________________ Time: 05:34:45 AM PST US Subject: Pietenpol-List: Re: Of electronics and banjos From: "Jerry Dotson" Clif the brake is impressive. Is it your own design? Does it warp there at the cable to actuate? I have more questions than answers! do not archive -------- Jerry Dotson 59 Daniel Johnson Rd Baker, FL 32531 Started building NX510JD July, 2009 now covering and painting 21" wheels Lycoming O-235 C2C Jay Anderson CloudCars prop 76 X 44 Read this topic online here: http://forums.matronics.com/viewtopic.php?p=368341#368341 ________________________________ Message 4 _____________________________________ Time: 06:16:52 AM PST US From: airlion Subject: Pietenpol-List: dimple Hi all, on my newly installed 1/16 ply on one bay of my leading edge I noticed a dimple about the size of a coffee can. Is there a way to get that out? I wonder if wetting it down and putting an iron to it will work. Gardiner ________________________________ Message 5 _____________________________________ Time: 06:41:12 AM PST US Subject: Re: Pietenpol-List: dimple From: "Jack@textors.com" Gardiner, I have them also and hoping the fabric will pull them down when shrunk. Jack Textor Sent from my iPad On Mar 13, 2012, at 8:16 AM, airlion wrote: > > Hi all, on my newly installed 1/16 ply on one bay of my leading edge I noticed a > dimple about the size of a coffee can. Is there a way to get that out? I wonder > if wetting it down and putting an iron to it will work. Gardiner > > > > > ________________________________ Message 6 _____________________________________ Time: 09:08:26 AM PST US Subject: Pietenpol-List: Corvair College 22 From: "kevinpurtee" CC 22 was a great success. Thanks to our Piet friends for attending. Thanks especially to Tim Willis, Gary Boothe and Mark Chouinard for their extra efforts. Lots of pics on Facebook: https://www.facebook.com/#!/pages/Corvair-College-22/320305497999282?sk=wall In the attached photo: Mark Chouinard, Bill & David Roach, Kevin & Shelley, John Franklin (congrats on your first engine run, John!), Gary Boothe, Robert Caldwell, Buddy Linder -------- Kevin "Axel" Purtee NX899KP Austin/Georgetown, TX Read this topic online here: http://forums.matronics.com/viewtopic.php?p=368354#368354 Attachments: http://forums.matronics.com//files/piet_people_cc22_156.jpg ________________________________ Message 7 _____________________________________ Time: 09:44:23 AM PST US From: "Barry Davis" Subject: RE: Pietenpol-List: SunNFun plans We took 12 planes from our EAA Chapter to Triple Tree last year and camped out. I think the count was around 450 planes in attendance, but don't quote me on that. We had so much fun that we plan to take our EAA Trailer with all the gear and make a 4 day trip this year. Should have 50 chapter members or so attend. See you there. Ps: we take the wives on this one. Barry Davis -----Original Message----- From: owner-pietenpol-list-server@matronics.com [mailto:owner-pietenpol-list-server@matronics.com] On Behalf Of Jack Phillips Sent: Monday, March 12, 2012 7:39 PM Subject: RE: Pietenpol-List: SunNFun plans --> I'm planning on making Triple Tree this year. Supposed to be the best fly-in south of Brodhead, and I don't have to fly over the mountains to get to it. Jack Phillips NX899JP Smith Mountain Lake, Virginia Do Not Archive -----Original Message----- From: owner-pietenpol-list-server@matronics.com [mailto:owner-pietenpol-list-server@matronics.com] On Behalf Of airlion Sent: Monday, March 12, 2012 5:38 PM Subject: Re: Pietenpol-List: SunNFun plans Ben, how about planning on joining with us at Tripple Tree Aerodrome just after labor day.Gardiner Mason ----- Original Message ---- From: Barry Davis Sent: Mon, March 12, 2012 4:51:09 PM Subject: RE: Pietenpol-List: SunNFun plans Ben Sorry, no Big Piets at Sun n Fun this year, especially after they sent us a bill for $28,000 for moving and cleanup. Barry -----Original Message----- From: owner-pietenpol-list-server@matronics.com [mailto:owner-pietenpol-list-server@matronics.com] On Behalf Of Ben Charvet Sent: Sunday, March 11, 2012 9:15 PM Subject: Pietenpol-List: SunNFun plans Hi all, I've been staying in a friend's motorhome the last 2 or 3 years at Sun-N-Fun. This year he isn't going, so I'm planning some Air-camping, loading all the camping gear I can fit into my front cockpit and center section and flying over. Anybody else planning to camp this year so I'm not hanging out by myself? -- Ben Charvet Titusville, Fl Really hoping his Pietenpol finally makes it to Lakeland ________________________________ Message 8 _____________________________________ Time: 09:48:43 AM PST US From: SKIP GADD Subject: Re: Pietenpol-List: SunNFun plans Hi Ben, Two of the "whoever else shows up" Dick mentioned are Jerry and Nancy who work at Homebuilt Parking check-in. They can give you directions to the Cow Pasture camping, and maybe a golf cart ride for your camping gear, or call Dick or me. Skip 304 483-8342 do not archive -----Original Message----- >From: Dick N >Sent: Mar 12, 2012 2:51 PM >To: pietenpol-list@matronics.com >Subject: Re: Pietenpol-List: SunNFun plans > > >Hi Ben >You can come over and hang out with me and Skip Gadd and whoever else shows >up. I will have some cold beer. >I'm already in Fla. Camping on the Okachabee waterway at the St. Locks. >Dick N. >612-805-1742 >----- Original Message ----- >From: "Ben Charvet" >To: "Pietenpol list" >Sent: Sunday, March 11, 2012 8:14 PM >Subject: Pietenpol-List: SunNFun plans > > >> >> Hi all, >> I've been staying in a friend's motorhome the last 2 or 3 years at >> Sun-N-Fun. This year he isn't going, so I'm planning some Air-camping, >> loading all the camping gear I can fit into my front cockpit and center >> section and flying over. Anybody else planning to camp this year so I'm >> not hanging out by myself? >> >> >> -- >> Ben Charvet >> Titusville, Fl >> >> Really hoping his Pietenpol finally makes it to Lakeland >> >> >> >> >> > > ________________________________ Message 9 _____________________________________ Time: 10:23:05 AM PST US Subject: Pietenpol-List: Re: CONTACT!!!!!! From: "Billy McCaskill" Awesome, Douwe! Can't wait to see it and hear it at Brodhead! do not archive -------- Billy McCaskill Urbana, IL tail section almost done, starting on ribs soon Read this topic online here: http://forums.matronics.com/viewtopic.php?p=368362#368362 ________________________________ Message 10 ____________________________________ Time: 10:39:55 AM PST US Subject: Pietenpol-List: Re: Corvair College 22 From: "K5YAC" Had a great time and learned a lot. Question... is that big guy on the far left building a Pietenpol? -------- Mark Chouinard Wings, Center Section and Empannage framed up - Working on Fuselage Read this topic online here: http://forums.matronics.com/viewtopic.php?p=368363#368363 ________________________________ Message 11 ____________________________________ Time: 10:39:55 AM PST US From: airlion Subject: Re: Pietenpol-List: dimple Jack, my dimples are concave and the water treatment did not work. So I scruffed the area up and smothed it out with liteweight body filler. It will be covered with fabric so I hope this works. Gardiner ----- Original Message ---- From: "Jack@textors.com" Sent: Tue, March 13, 2012 9:40:14 AM Subject: Re: Pietenpol-List: dimple Gardiner, I have them also and hoping the fabric will pull them down when shrunk. Jack Textor Sent from my iPad On Mar 13, 2012, at 8:16 AM, airlion wrote: > > Hi all, on my newly installed 1/16 ply on one bay of my leading edge I noticed >a > > dimple about the size of a coffee can. Is there a way to get that out? I wonder > > if wetting it down and putting an iron to it will work. Gardiner > > > > > ________________________________ Message 12 ____________________________________ Time: 11:09:02 AM PST US Subject: Pietenpol-List: Re: Corvair College 22 From: "Bill Church" Or maybe the question is: Why is everyone else so small? do not archive BC Read this topic online here: http://forums.matronics.com/viewtopic.php?p=368366#368366 ________________________________ Message 13 ____________________________________ Time: 11:25:50 AM PST US From: "Cuy, Michael D. (GRC-RXD0)[ASRC AEROSPACE CORP]" Subject: Pietenpol-List: short video of Douwe's first engine run! Just released. Douwe...I hope you don't mind me sharing this. http://ww w.youtube.com/watch?v=p-G09RmXPOo&feature=related Congratulations man!!!!!! (seriously-congrats!) Mike C. do not archive ________________________________ Message 14 ____________________________________ Time: 11:58:26 AM PST US From: "Creative Eagles Corp" Subject: Pietenpol-List: First Composite Pedal Kitplane Good day everyone! I thought that I mention here that the First Composite Pedal Kitplane is now available! The first model they called GOTCHA! Gotcha3.jpg Gotcha Composite Pedal Kitplane turns your kids tricycle into something wonderful and exciting rides. The Gotcha composite pedal kitplane is a bolt-in project into your kids existing tricycle. The kit consist of the fuselage, the propeller, seat back, wings, horizontal stabilizer and hardwares. Build your Gotcha now and enjoy watching your young pilots as they fly around the neighborhood. Their smile will touch your heart! Their website www.creative-eagles.com or contact at info@creative-eagles.com Gotcha Pedal Plane.JPG Unleash your young eagles and let them enjoy the power of flight. Enjoy! ________________________________ Message 15 ____________________________________ Time: 12:02:37 PM PST US From: "Cuy, Michael D. (GRC-RXD0)[ASRC AEROSPACE CORP]" Subject: Pietenpol-List: what dedication....holy moly Kevin and Shelley built SIXTEEN work benches for the Corvair College. Wo w, that's some effort. The pictures posted on Facebook were outstanding. Looks like some nice work was accom plished and some gorgeous looking engines. What a great setup too. Kevin-is that the hangar where Devil Dog is hangared with Beth and group? Nice bunch. Bummed with them at OSH a few years back. https://www.facebook.com/pages/Corvair-College-22/320305497999282?sk=wall #!/pages/Corvair-College-22/320305497999282 do not archive [cid:image001.png@01CD012A.21237B00] ________________________________ Message 16 ____________________________________ Time: 12:09:56 PM PST US From: brian.e.jardine@l-3com.com Subject: Pietenpol-List: Continental C85-12 0-SMOH "For Sale" Group, This showed up on our local KSL.com classifieds under Aviation so I thought I would pass it along. I do not have any affiliation with listed engine or seller. http://www.ksl.com/index.php?nid=218&ad=19569820&cat=151&lpid=&se arch Brian SLC-UT ________________________________ Message 17 ____________________________________ Time: 12:43:15 PM PST US Subject: Pietenpol-List: Re: what dedication....holy moly From: "kevinpurtee" We asked and Beth offered, but Shelley used her charms and Georgetown Jet Center came up with an empty hangar for us. Beth runs a very busy flight school and we would have absolutely been in the way. Also, the B-25 takes up a little space in their hangar :) . 17 work benches, to be exact... do not archive -------- Kevin "Axel" Purtee NX899KP Austin/Georgetown, TX Read this topic online here: http://forums.matronics.com/viewtopic.php?p=368388#368388 ________________________________ Message 18 ____________________________________ Time: 01:47:02 PM PST US Subject: Pietenpol-List: Wire Wheels From: "indyaquanaut" The long and the short...I started a business 8 years ago and when I did, it pretty much stopped the Piet project. The business has finally setteled down a little and I'm now able to get back to building. I've owned and flown a Cessna 170 for years and now I think it's time to move up, so it's back to work on the Pietenpol I'm getting ready to build the straight axle gear and I'm looking for a good option for 21" wire wheels. I've spent a lot of time looking through the posts and I'm not crazy about making my own wheels. The 21" Harley spoke wheels sound like something I'd be interested in and if anyone who has them would be willing to share some information, it would really be appreciated. (Or if anyone could offer a better option, I'm all ears). Information such as: Where you got them What kind of cost am I looking at What did you do for breaks What size axle did you use Are you glad you used them What tires did you use Read this topic online here: http://forums.matronics.com/viewtopic.php?p=368399#368399 ________________________________ Message 19 ____________________________________ Time: 02:17:41 PM PST US From: Jim Markle Subject: Re: Pietenpol-List: Wire Wheels Here's what I did (well, the wheels/brakes part).... http://mykitplane.com/Planes/PeoplesFiles/wheels.doc Hope that helps. It was a while back so the prices have probably changed.... -----Original Message----- >From: indyaquanaut >Sent: Mar 13, 2012 3:46 PM >To: pietenpol-list@matronics.com >Subject: Pietenpol-List: Wire Wheels > > >The long and the short...I started a business 8 years ago and when I did, it pretty much stopped the Piet project. The business has finally setteled down >a little and I'm now able to get back to building. I've owned and flown a Cessna 170 for years and now I think it's time to move up, so it's back to work on the Pietenpol > >I'm getting ready to build the straight axle gear and I'm looking for a good option for 21" wire wheels. I've spent a lot of time looking through the posts and I'm not crazy about making my own wheels. The 21" Harley spoke wheels sound like something I'd be interested in and if anyone who has them would be willing to share some information, it would really be appreciated. (Or if anyone could offer a better option, I'm all ears). > >Information such as: >Where you got them >What kind of cost am I looking at >What did you do for breaks >What size axle did you use >Are you glad you used them >What tires did you use > > >Read this topic online here: > >http://forums.matronics.com/viewtopic.php?p=368399#368399 > > ________________________________ Message 20 ____________________________________ Time: 02:25:18 PM PST US From: Jim Markle Subject: a better linke..... Pietenpol-List: Wire Wheels Oops, that link should have been: http://mykitplane.com/Planes/filesList2.cfm?AlbumID=67 -----Original Message----- >From: Jim Markle >Sent: Mar 13, 2012 4:17 PM >To: pietenpol-list@matronics.com >Subject: Re: Pietenpol-List: Wire Wheels > >Here's what I did (well, the wheels/brakes part).... > >http://mykitplane.com/Planes/PeoplesFiles/wheels.doc > >Hope that helps. It was a while back so the prices have probably changed.... > > >-----Original Message----- >>From: indyaquanaut >>Sent: Mar 13, 2012 3:46 PM >>To: pietenpol-list@matronics.com >>Subject: Pietenpol-List: Wire Wheels >> >> >>The long and the short...I started a business 8 years ago and when I did, it pretty much stopped the Piet project. The business has finally setteled down >>a little and I'm now able to get back to building. I've owned and flown a Cessna 170 for years and now I think it's time to move up, so it's back to work on the Pietenpol >> >>I'm getting ready to build the straight axle gear and I'm looking for a good option for 21" wire wheels. I've spent a lot of time looking through the posts and I'm not crazy about making my own wheels. The 21" Harley spoke wheels sound like something I'd be interested in and if anyone who has them would be willing to share some information, it would really be appreciated. (Or if anyone could offer a better option, I'm all ears). >> >>Information such as: >>Where you got them >>What kind of cost am I looking at >>What did you do for breaks >>What size axle did you use >>Are you glad you used them >>What tires did you use >> >> >> >> >>Read this topic online here: >> >>http://forums.matronics.com/viewtopic.php?p=368399#368399 >> >> >> >> >> >> >> >> >> >> > > ________________________________ Message 21 ____________________________________ Time: 04:07:44 PM PST US From: "Gboothe5" Subject: RE: Pietenpol-List: Re: Corvair College 22 Who? Jim Markle? Yes...I hear he is... Gary from Cool Do not archive -----Original Message----- From: owner-pietenpol-list-server@matronics.com [mailto:owner-pietenpol-list-server@matronics.com] On Behalf Of K5YAC Sent: Tuesday, March 13, 2012 10:39 AM Subject: Pietenpol-List: Re: Corvair College 22 Had a great time and learned a lot. Question... is that big guy on the far left building a Pietenpol? -------- Mark Chouinard Wings, Center Section and Empannage framed up - Working on Fuselage Read this topic online here: http://forums.matronics.com/viewtopic.php?p=368363#368363 ________________________________ Message 22 ____________________________________ Time: 04:07:44 PM PST US From: "Gboothe5" Subject: RE: Pietenpol-List: Wire Wheels Where you got them - Paughco, Inc.; www.paughco.com; 21" Harley Sportster. Ask for "Troy" and tell him you want the same wheels that he supplied to Gary Boothe for his airplane. What kind of cost am I looking at - I got a special price...so not sure...you can call. What did you do for breaks - go cart What size axle did you use - 1 1/2" stepped down to 1". Paughco puts 1" bearings in all their wheels. Are you glad you used them - OH YEAH!!! I am told that I need to pack stick to beat the ladies back... What tires did you use - Whatever Paughco installed. Dave - you can see most of what I have done on www.westcoastpiet.com. Let me know if you want any answers... Gary from Cool -----Original Message----- From: owner-pietenpol-list-server@matronics.com [mailto:owner-pietenpol-list-server@matronics.com] On Behalf Of indyaquanaut Sent: Tuesday, March 13, 2012 1:46 PM Subject: Pietenpol-List: Wire Wheels The long and the short...I started a business 8 years ago and when I did, it pretty much stopped the Piet project. The business has finally setteled down a little and I'm now able to get back to building. I've owned and flown a Cessna 170 for years and now I think it's time to move up, so it's back to work on the Pietenpol I'm getting ready to build the straight axle gear and I'm looking for a good option for 21" wire wheels. I've spent a lot of time looking through the posts and I'm not crazy about making my own wheels. The 21" Harley spoke wheels sound like something I'd be interested in and if anyone who has them would be willing to share some information, it would really be appreciated. (Or if anyone could offer a better option, I'm all ears). Information such as: Where you got them What kind of cost am I looking at What did you do for breaks What size axle did you use Are you glad you used them What tires did you use Read this topic online here: http://forums.matronics.com/viewtopic.php?p=368399#368399 ________________________________ Message 23 ____________________________________ Time: 05:05:11 PM PST US Subject: Pietenpol-List: Re: Wire Wheels From: "Bill Church" Here's a different option. http://www.airdromeaeroplanes.com/heavydutywheels.html However, I think they're only 19" rims, not 21". The hubs come fully fabricated, and I think you need to assemble the wheels, but the price seems pretty reasonable. I believe a few builders have used these wheels. If any of those guys are reading this thread they might be able to shine a little light on the product and the service. Bill C. Read this topic online here: http://forums.matronics.com/viewtopic.php?p=368420#368420 ________________________________ Message 24 ____________________________________ Time: 05:10:23 PM PST US Subject: Pietenpol-List: Brodhead plans From: "Mark Baxter" Greetings all, I am planning to attend the fly-in this summer. I will be flying by airline from Corvallis, Oregon. I would appreciate any advise some of you might have regarding flights, car rental etc. I would like to camp while there and was thinking it would be handy if I could UPS a small box of camping gear to someone at Brodhead. Thanks in advance and I look forward to meeting some of you there. Mark Baxter Read this topic online here: http://forums.matronics.com/viewtopic.php?p=368421#368421 ________________________________ Message 25 ____________________________________ Time: 05:41:42 PM PST US From: Dave Millikan Subject: Re: Pietenpol-List: Wire Wheels Got mine from "Airdromes & Airplanes " in Missouri. He does wheels and WW1 replicas. I had left over Grove brakes from a unfinished float project. The drums bolt on to the hubs, not the spokes. He took pity on me and threaded the spokes for me. I understand that is a chore. I took them to a local motorcycle shop for the tires. Not cheep ... 8 bills- plus. Dave- Inverness, Fl- N1QZ-- --- On Tue, 3/13/12, indyaquanaut wrote: From: indyaquanaut Subject: Pietenpol-List: Wire Wheels us> The long and the short...I started a business 8 years ago and when I did, i t pretty much stopped the Piet project. The business has finally setteled d own a little and I'm now able to get back to building.- I've owned and flown a Cessna 170 for years and now I think it's time to move up, so it's back t o work on the Pietenpol I'm getting ready to build the straight axle gear and I'm looking for a goo d option for 21" wire wheels. I've spent a lot of time looking through the posts and I'm not crazy about making my own wheels. The 21" Harley spoke wh eels sound like something I'd be interested in and if anyone who has them w ould be willing to share some information, it would really be appreciated. - (Or if anyone could offer a better option, I'm all ears). Information such as: Where you got them What kind of cost am I looking at What did you do for breaks What size axle did you use Are you glad you used them What tires did you use Read this topic online here: http://forums.matronics.com/viewtopic.php?p=368399#368399 le, List Admin. ________________________________ Message 26 ____________________________________ Time: 07:26:44 PM PST US From: "Douwe Blumberg" Subject: Pietenpol-List: You Tube link to Douwe's C-90 First Run-up in Airframe Hey all, Due to overwhelming demand... http://www.youtube.com/watch?v=zlQXwjuoVKA&feature=youtube_gdata_player If that link doesn't get you there, just search for "Douwe's C-90 first run-up in airframe", and that outta do it. Working away now on lots of persnickety stuff. Douwe ________________________________ Message 27 ____________________________________ Time: 09:52:21 PM PST US Subject: Re: Pietenpol-List: Re: Wire Wheels From: Ken Bickers This is a copy of a message that I posted in a related thread last year on Feb. 2: "One word of warning about Robert Baslee and Airdrome Aeroplanes. I bought my wheels from him, but he never delivered on the tubes and tires. I emailed, called, emailed, called. At first, he told me they would be coming in a separate shipment, then after repeated efforts to get him to send them, he quit responding all together.I'll say this, the hubs and wheels look beautiful. But the hubs are not straight enough to just bolt brakes to, even though he indicated they would be. The cost of coming up with an option to fix that isn't trivial. Worse, I'm not sure, and won't be until the aircraft is moving, whether my solution solves that problem. And I ended up buying tubes and tires from a motorcycle website and having a local motorcycle shop mount them for me.That added to the cost even more. If I had the option to replay history, I wouldn't have dealt with Baslee. Your mileage might differ and I'm sure others have had good experiences with him, but that was my experience." Hopefully, Baslee has improved on his customer service by now. Cheers, Ken On Tue, Mar 13, 2012 at 6:04 PM, Bill Church wrote: > > Here's a different option. > > http://www.airdromeaeroplanes.com/heavydutywheels.html > > However, I think they're only 19" rims, not 21". > The hubs come fully fabricated, and I think you need to assemble the wheels, but the price seems pretty reasonable. I believe a few builders have used these wheels. If any of those guys are reading this thread they might be able to shine a little light on the product and the service. > > Bill C. > > > Read this topic online here: > > http://forums.matronics.com/viewtopic.php?p=368420#368420 > > ------------------------------------------------------------------------------------- Other Matronics Email List Services ------------------------------------------------------------------------------------- Post A New Message pietenpol-list@matronics.com UN/SUBSCRIBE http://www.matronics.com/subscription List FAQ http://www.matronics.com/FAQ/Pietenpol-List.htm Web Forum Interface To Lists http://forums.matronics.com Matronics List Wiki http://wiki.matronics.com Full Archive Search Engine http://www.matronics.com/search 7-Day List Browse http://www.matronics.com/browse/pietenpol-list Browse Digests http://www.matronics.com/digest/pietenpol-list Browse Other Lists http://www.matronics.com/browse Live Online Chat! http://www.matronics.com/chat Archive Downloading http://www.matronics.com/archives Photo Share http://www.matronics.com/photoshare Other Email Lists http://www.matronics.com/emaillists Contributions http://www.matronics.com/contribution ------------------------------------------------------------------------------------- These Email List Services are sponsored solely by Matronics and through the generous Contributions of its members.