---------------------------------------------------------- Pietenpol-List Digest Archive --- Total Messages Posted Tue 05/08/12: 9 ---------------------------------------------------------- Today's Message Index: ---------------------- 1. 06:24 AM - Re: 14 YEAR UPDATE (Jerry Dotson) 2. 06:50 AM - Re: Re: 14 YEAR UPDATE (Michael Perez) 3. 07:05 AM - Re: "Mighty Corvair Again Roars to Life After 6 Months" (shad bell) 4. 07:38 AM - Re: 14 YEAR UPDATE (aerocarjake) 5. 11:56 AM - Fir available in Minneapolis (TOM MICHELLE BRANT) 6. 06:21 PM - Re: Fir available in Minneapolis (Dick N) 7. 07:38 PM - turnbuckle size (Larry V) 8. 09:26 PM - ShortCut (Clif Dawson) 9. 10:55 PM - Re: ShortCut (Clif Dawson) ________________________________ Message 1 _____________________________________ Time: 06:24:03 AM PST US Subject: Pietenpol-List: Re: 14 YEAR UPDATE From: "Jerry Dotson" Looking good. Now you need some Elmers school glue and some of the wife's bed sheets so the wind can't flow through the nice structure. Covering was the most dreaded and turned out to be the most fun for me. Do not archive -------- Jerry Dotson 59 Daniel Johnson Rd Baker, FL 32531 Started building NX510JD July, 2009 thru covering and painting, now in final assembly 21" wheels Lycoming O-235 C2C Jay Anderson CloudCars prop 76 X 44 Read this topic online here: http://forums.matronics.com/viewtopic.php?p=372620#372620 ________________________________ Message 2 _____________________________________ Time: 06:50:44 AM PST US From: Michael Perez Subject: Re: Pietenpol-List: Re: 14 YEAR UPDATE Very nice indeed. It's been a long journey, but from what I can see, well worth the effort. Michael Perez Pietenpol HINT Videos Karetaker Aero www.karetakeraero.com ________________________________ Message 3 _____________________________________ Time: 07:05:11 AM PST US From: shad bell Subject: Re: Pietenpol-List: "Mighty Corvair Again Roars to Life After 6 Months" Man I don't know, Latex paint, and a Corvair, you are asking for it!=C2- Just kidding ya Gary From Cool, Nice work.=C2- I should have our corvair latex rocket ship flying this weekend, as long as I don't have to install f loats due to the rain we have been getting. =C2- Shad --- On Sun, 5/6/12, Gary Boothe wrote: From: Gary Boothe Subject: Pietenpol-List: "Mighty Corvair Again Roars to Life After 6 Months " Just finished up some electrical loose ends, and, after having the airframe dismantled for fabric and paint, I just HAD to run it again =C2- http://youtu.be/JE0WxHGZxus =C2- Just need a volunteer to do another static run-up! (Curt Merdanwhe re are you?) =C2- Gary from Cool NX308MB =C2- ________________________________ Message 4 _____________________________________ Time: 07:38:14 AM PST US Subject: Pietenpol-List: Re: 14 YEAR UPDATE From: "aerocarjake" VERY nice..... Looks fantastic...... I can't think of a better way to spend those years....!! Do not archive -------- Jake Schultz - curator, Newport Way Air Museum (OK, it's just my home) Read this topic online here: http://forums.matronics.com/viewtopic.php?p=372630#372630 ________________________________ Message 5 _____________________________________ Time: 11:56:52 AM PST US From: TOM MICHELLE BRANT Subject: Pietenpol-List: Fir available in Minneapolis Hey all=2C I have a couple of boards of nice clear fir I could offer to someone cheap - perhaps Dick Navratril. I purchased them a while back with the intention s of using them for spars but they didn't pan out. They'd make good materi al for the fuselage=2C ribs=2C tail=2C etc. but without a bunch of glue up =2C they wouldn't make good spars. Looking to get $50 for the 3+ boards th at are 3/4 thick=2C x 4 3/4" wide x 16'-0" long. Lemme know if you're interested - I don't want to ship so you'd have to pic k them up. If I don't sell=2C I'm thinking it will feed another project fo r someone (perhaps me) down the road=2C but currently I have all that I can do to work on my current project which was started in 2001 and is on sched ule to complete sometime before the next century. Tom B. ________________________________ Message 6 _____________________________________ Time: 06:21:07 PM PST US From: "Dick N" Subject: Re: Pietenpol-List: Fir available in Minneapolis Sorry Tom, I dont need any right now. Dick N. ----- Original Message ----- From: TOM MICHELLE BRANT To: pietenpol-list@matronics.com Sent: Tuesday, May 08, 2012 1:55 PM Subject: Pietenpol-List: Fir available in Minneapolis Hey all, I have a couple of boards of nice clear fir I could offer to someone cheap - perhaps Dick Navratril. I purchased them a while back with the intentions of using them for spars but they didn't pan out. They'd make good material for the fuselage, ribs, tail, etc. but without a bunch of glue up, they wouldn't make good spars. Looking to get $50 for the 3+ boards that are 3/4 thick, x 4 3/4" wide x 16'-0" long. Lemme know if you're interested - I don't want to ship so you'd have to pick them up. If I don't sell, I'm thinking it will feed another project for someone (perhaps me) down the road, but currently I have all that I can do to work on my current project which was started in 2001 and is on schedule to complete sometime before the next century. Tom B. ________________________________ Message 7 _____________________________________ Time: 07:38:44 PM PST US Subject: Pietenpol-List: turnbuckle size From: "Larry V" Hello Today my trip to aircraft spruce in Brantford Can. I picked up 1 little bag and 750.00 worth of cable, thimbles, clevises, copper sleeves, turnbuckles and a couple of tools. When I got home I was just like a kid at Christmas time opening up the little packages. The problem is once I put together the turnbuckles they seem way to big. Size 155-32L With 170 eye and 161 fork The length with eye and fork screwed all the way in is 6 inches. I have one I bought that was a 155-16s and it looks way to small. I am using 1/8th 7-19 cable throughout the plane. I was wondering if any one could help me out with the turnbuckle size? Thanks Larry V Read this topic online here: http://forums.matronics.com/viewtopic.php?p=372670#372670 ________________________________ Message 8 _____________________________________ Time: 09:26:52 PM PST US From: "Clif Dawson" Subject: Pietenpol-List: ShortCut This is nuts! Of course none of us would EVER need this! http://www.finehomebuilding.com/item/23183/how-to-make-a-woodworking-spri ng-clamp-out-of-pvc-drainpipe/ ________________________________ Message 9 _____________________________________ Time: 10:55:17 PM PST US From: "Clif Dawson" Subject: Re: Pietenpol-List: ShortCut Rats! That's not the one that was supposed to come up! THIS one is! http://www.finehomebuilding.com/item/22728/how-to-save-a-miscut-board-fro m-the-scrap-bin This is nuts! Of course none of us would EVER need this! http://www.finehomebuilding.com/item/23183/how-to-make-a-woodworking-spri ng-clamp-out-of-pvc-drainpipe/ ------------------------------------------------------------------------------------- Other Matronics Email List Services ------------------------------------------------------------------------------------- Post A New Message pietenpol-list@matronics.com UN/SUBSCRIBE http://www.matronics.com/subscription List FAQ http://www.matronics.com/FAQ/Pietenpol-List.htm Web Forum Interface To Lists http://forums.matronics.com Matronics List Wiki http://wiki.matronics.com Full Archive Search Engine http://www.matronics.com/search 7-Day List Browse http://www.matronics.com/browse/pietenpol-list Browse Digests http://www.matronics.com/digest/pietenpol-list Browse Other Lists http://www.matronics.com/browse Live Online Chat! http://www.matronics.com/chat Archive Downloading http://www.matronics.com/archives Photo Share http://www.matronics.com/photoshare Other Email Lists http://www.matronics.com/emaillists Contributions http://www.matronics.com/contribution ------------------------------------------------------------------------------------- These Email List Services are sponsored solely by Matronics and through the generous Contributions of its members.