---------------------------------------------------------- Pietenpol-List Digest Archive --- Total Messages Posted Wed 05/09/12: 9 ---------------------------------------------------------- Today's Message Index: ---------------------- 1. 04:17 AM - Board stretcher (helspersew@aol.com) 2. 04:29 AM - Re: Board stretcher (womenfly2) 3. 05:10 AM - Re: turnbuckle size (Michael Perez) 4. 05:23 AM - Re: Board stretcher (tools) 5. 06:12 AM - Re: Re: Board stretcher (Michael Perez) 6. 08:06 AM - Re: ShortCut (K5YAC) 7. 08:44 AM - Cone Gear for Magneto (tkreiner) 8. 07:45 PM - Re: Re: Board stretcher (Clif Dawson) 9. 09:07 PM - Re: ShortCut (K5YAC) ________________________________ Message 1 _____________________________________ Time: 04:17:56 AM PST US Subject: Pietenpol-List: Board stretcher From: helspersew@aol.com C'mon Cliff, this had GOT to be a hoax! Dan Helsper Puryear, TN do not archive ________________________________ Message 2 _____________________________________ Time: 04:29:33 AM PST US Subject: Pietenpol-List: Re: Board stretcher From: "womenfly2" Really! ... I hope no one believed this, note the date posted, April 1st, 2012. Good one! -------- Read this topic online here: http://forums.matronics.com/viewtopic.php?p=372681#372681 ________________________________ Message 3 _____________________________________ Time: 05:10:44 AM PST US From: Michael Perez Subject: Re: Pietenpol-List: turnbuckle size Larry, the -32L body, the "L" indicates it is a long body as opposed to the short body, -32S. The forks and the eyes can also be odered long. If the LAST letter for each is the letter "L", they are long as well. Next to last letters indicate th read direction.-- -32LL left head thread, long. -32RL, right hand threa d, long.- -32 RS, right hand thread, short. Michael Perez =0APietenpol HINT Videos =0AKaretaker Aero =0Awww.karetakeraero.com ________________________________ Message 4 _____________________________________ Time: 05:23:17 AM PST US Subject: Pietenpol-List: Re: Board stretcher From: "tools" Obviously fake... to go from 4 to 5 feet is NOT 20 percent like he says... However, if you read the comments, and look carefully, you'll see it's a knot remover as well. THAT could be useful. I imagine once stretched, the grain runout would be less as well. Lastly, if longer, but cross section dimensionally the same, it should weigh less per cubic volume, making it lighter and our planes will climb better! Seriously, this stuff has all kinds of uses! Read this topic online here: http://forums.matronics.com/viewtopic.php?p=372684#372684 ________________________________ Message 5 _____________________________________ Time: 06:12:28 AM PST US From: Michael Perez Subject: Re: Pietenpol-List: Re: Board stretcher I agree! Since I am building the short fuselage, if later in time, (during a re-cover perhaps), I can put some of this "pancake" mix on the wood and s tretch out the fuse to the long version...or more!- Fuselage too narrow? Stretch it! Make it a two place side by side...or... Do Not Archive Michael Perez =0APietenpol HINT Videos =0AKaretaker Aero =0Awww.karetakeraero.com ________________________________ Message 6 _____________________________________ Time: 08:06:58 AM PST US Subject: Pietenpol-List: Re: ShortCut From: "K5YAC" Clif: Do you know if that stuff works equally well on all types of wood? I'm wondering if I were to apply it to my wings if the spruce, birch and mahogany would all stretch equally. Seems like a good way to add 6' to the wings once they are fully constructed. rather than pulling with a simple come-along, I figure I could use a couple of trees tied to the root corners and pull on the wing tip bow with a Bobcat or something. -------- Mark Chouinard Wings, Center Section and Empannage and Fuse framed up - Working on Landing Gear Read this topic online here: http://forums.matronics.com/viewtopic.php?p=372690#372690 ________________________________ Message 7 _____________________________________ Time: 08:44:02 AM PST US Subject: Pietenpol-List: Cone Gear for Magneto From: "tkreiner" Hey gang, I'm looking for a 1 3/4 inch long cone gear to fit an older Bendix magneto (SF4RN8), or a complete SF4RN8 core with gear. Hit me offline if you have one. Thanks, -------- Tom Kreiner Read this topic online here: http://forums.matronics.com/viewtopic.php?p=372692#372692 ________________________________ Message 8 _____________________________________ Time: 07:45:41 PM PST US From: "Clif Dawson" Subject: Re: Pietenpol-List: Re: Board stretcher Sometimes I just can't help myself! And my kids are three thousand miles away so they can't help me either! :-) Anyway, here's the other end of my brake system. Finally!! Clif "Beware of geeks bearing formulas." (Warren Buffett) > > Obviously fake... to go from 4 to 5 feet is NOT 20 percent like he says... ________________________________ Message 9 _____________________________________ Time: 09:07:37 PM PST US Subject: Pietenpol-List: Re: ShortCut From: "K5YAC" I couldn't lure anyone in? I tried to sound like I was buying it... guess it didn't work. Slow day... -------- Mark Chouinard Wings, Center Section and Empannage and Fuse framed up - Working on Landing Gear Read this topic online here: http://forums.matronics.com/viewtopic.php?p=372725#372725 ------------------------------------------------------------------------------------- Other Matronics Email List Services ------------------------------------------------------------------------------------- Post A New Message pietenpol-list@matronics.com UN/SUBSCRIBE http://www.matronics.com/subscription List FAQ http://www.matronics.com/FAQ/Pietenpol-List.htm Web Forum Interface To Lists http://forums.matronics.com Matronics List Wiki http://wiki.matronics.com Full Archive Search Engine http://www.matronics.com/search 7-Day List Browse http://www.matronics.com/browse/pietenpol-list Browse Digests http://www.matronics.com/digest/pietenpol-list Browse Other Lists http://www.matronics.com/browse Live Online Chat! http://www.matronics.com/chat Archive Downloading http://www.matronics.com/archives Photo Share http://www.matronics.com/photoshare Other Email Lists http://www.matronics.com/emaillists Contributions http://www.matronics.com/contribution ------------------------------------------------------------------------------------- These Email List Services are sponsored solely by Matronics and through the generous Contributions of its members.