---------------------------------------------------------- Pietenpol-List Digest Archive --- Total Messages Posted Sun 07/15/12: 5 ---------------------------------------------------------- Today's Message Index: ---------------------- 1. 09:40 AM - Re: Re: Airworthiness Certificate !!! (V Groah) 2. 05:04 PM - Mike and Vic Groah visit (AircamperN11MS) 3. 05:26 PM - Can't make Brodhead (shad bell) 4. 05:30 PM - Re: Can't make Brodhead (Gary Boothe) 5. 05:32 PM - Re: Mike and Vic Groah visit (Gary Boothe) ________________________________ Message 1 _____________________________________ Time: 09:40:36 AM PST US From: V Groah Subject: RE: Pietenpol-List: Re: Airworthiness Certificate !!! You must have seen the photos that were taken yesterday with the two piets together. The wing gap seals are still off for the inspector to see the wi ng mounts. We have not had time to reinstall them yet. Yes it is a standa rd three piece wing. As for the engine we have made sure that all the bolt s are securely wired as to insure a firm mount on the prop. That way it ca n turn either way securely. You know=2C you have to be flexible about thes e things. No use getting into a rut and have the thing turn the same way a s every one else. They say a little variety in life is good. This way we can fly with you and with the counter rotating props it would be like flyin g a twin. Makes for a smooth flight. Lets try it at the west coast Piet m eet at Frazier Lake next june. We slipped that one through the inspection. HA No worm drive clamps on a ny pressure lines of any kind. All aircraft screw on lines. Safetied. In all seriousness. it is good to have you out west. If I ever go to to my place in Oregon again I will try to stop in on the way through. I hope yo u can make it to the west coast Piet meet next year at Frazier Lake Ca. It would be a long flight for a Piet but you will meet some of the nicest air men in the country. Markel even came one year. Hope he can again some tim e soon. We hope to have several new Piets at the meet next year. Vic do not archive > Subject: Pietenpol-List: Re: Airworthiness Certificate !!! > From: taildrags@hotmail.com > Date: Sat=2C 14 Jul 2012 09:22:30 -0700 > To: pietenpol-list@matronics.com > > > Wow=2C Vic and Mike- that is a beautiful airplane! Well done! It looks li ke you'll have no problem 3-pointing it in full stall with it sitting up on the tall spoked wheels like that. And a very handsome and classic paint sc heme. > > I just see a few problems with it. For one=2C I've never seen one built w ith a 2-piece wing like that=2C with the starboard wing longer than the por t one. And don't forget to install the gap cover where the wings join. > > Another thing=2C the propeller is installed backwards and may try to unsc rew itself from the airplane if you start up the engine with it turning bac kwards. Everyone knows that real airplane engines turn clockwise when viewe d from the cockpit. Just a caution for you on that little faux pas. > > Last item: did you safety all the worm drive hose clamps? =3Bo) > > do not archive > > -------- > Oscar Zuniga > Medford/Ashland=2C OR > Air Camper NX41CC "=3BScout"=3B > A75 power > > > > > Read this topic online here: > > http://forums.matronics.com/viewtopic.php?p=378285#378285 > > > > > > > =========== =========== =========== =========== > > > ________________________________ Message 2 _____________________________________ Time: 05:04:48 PM PST US Subject: Pietenpol-List: Mike and Vic Groah visit From: "AircamperN11MS" Hi Pieters, Mike and Vic have built a beautiful Piet. I very much approve of the colors they have chosen. The wood work is amazing. All they need to do now is fly it. We had a great visit and I am looking forward to flying with him in the near future. Congratulations to both Mike and Vic.. Outstanding Job, -------- Scott Liefeld Flying N11MS since March 1972 Steel Tube C-85-12 Wire Wheels Brodhead in 1996 Read this topic online here: http://forums.matronics.com/viewtopic.php?p=378342#378342 Attachments: http://forums.matronics.com//files/img_0465_128.jpg http://forums.matronics.com//files/img_0459_175.jpg http://forums.matronics.com//files/img_0457_136.jpg ________________________________ Message 3 _____________________________________ Time: 05:26:33 PM PST US From: shad bell Subject: Pietenpol-List: Can't make Brodhead Well Guys and Gals, I won't be making Brodhead this year, I had some family commitments that came up that I need to be here for on Saturday.- I will miss your fellowship, and camaraderie.- I hope you all have a great time , take lots of pictures, videos.- Looks like a good forcast not in the 10 0's like last year.- - Fly safe, drive safe, Shad - - - - don't archive ________________________________ Message 4 _____________________________________ Time: 05:30:23 PM PST US From: "Gary Boothe" Subject: RE: Pietenpol-List: Can't make Brodhead Dang family commitments! Gary Boothe NX308MB Do not archive From: owner-pietenpol-list-server@matronics.com [mailto:owner-pietenpol-list-server@matronics.com] On Behalf Of shad bell Sent: Sunday, July 15, 2012 5:26 PM Subject: Pietenpol-List: Can't make Brodhead Well Guys and Gals, I won't be making Brodhead this year, I had some family commitments that came up that I need to be here for on Saturday. I will miss your fellowship, and camaraderie. I hope you all have a great time, take lots of pictures, videos. Looks like a good forcast not in the 100's like last year. Fly safe, drive safe, Shad don't archive ________________________________ Message 5 _____________________________________ Time: 05:32:51 PM PST US From: "Gary Boothe" Subject: RE: Pietenpol-List: Mike and Vic Groah visit How about that varnish job in the interior!! Mike says he just vacuums up the flies off the floor boards, 'cuz the flies just slide off the paint job... Gary Boothe NX308MB Do not archive -----Original Message----- From: owner-pietenpol-list-server@matronics.com [mailto:owner-pietenpol-list-server@matronics.com] On Behalf Of AircamperN11MS Sent: Sunday, July 15, 2012 5:04 PM Subject: Pietenpol-List: Mike and Vic Groah visit --> Hi Pieters, Mike and Vic have built a beautiful Piet. I very much approve of the colors they have chosen. The wood work is amazing. All they need to do now is fly it. We had a great visit and I am looking forward to flying with him in the near future. Congratulations to both Mike and Vic.. Outstanding Job, -------- Scott Liefeld Flying N11MS since March 1972 Steel Tube C-85-12 Wire Wheels Brodhead in 1996 Read this topic online here: http://forums.matronics.com/viewtopic.php?p=378342#378342 Attachments: http://forums.matronics.com//files/img_0465_128.jpg http://forums.matronics.com//files/img_0459_175.jpg http://forums.matronics.com//files/img_0457_136.jpg ------------------------------------------------------------------------------------- Other Matronics Email List Services ------------------------------------------------------------------------------------- Post A New Message pietenpol-list@matronics.com UN/SUBSCRIBE http://www.matronics.com/subscription List FAQ http://www.matronics.com/FAQ/Pietenpol-List.htm Web Forum Interface To Lists http://forums.matronics.com Matronics List Wiki http://wiki.matronics.com Full Archive Search Engine http://www.matronics.com/search 7-Day List Browse http://www.matronics.com/browse/pietenpol-list Browse Digests http://www.matronics.com/digest/pietenpol-list Browse Other Lists http://www.matronics.com/browse Live Online Chat! http://www.matronics.com/chat Archive Downloading http://www.matronics.com/archives Photo Share http://www.matronics.com/photoshare Other Email Lists http://www.matronics.com/emaillists Contributions http://www.matronics.com/contribution ------------------------------------------------------------------------------------- These Email List Services are sponsored solely by Matronics and through the generous Contributions of its members.