Today's Message Index:
----------------------
1. 04:16 AM - Re: prop clearence (helspersew@aol.com)
2. 04:56 AM - Kevin (woodflier@aol.com)
3. 05:26 AM - Re: Kevin (Robert Bush)
4. 05:29 AM - Re: motorcycle wheels - bronze bearings (Michael Perez)
5. 06:13 AM - Re: Kevin (dog67@aol.com)
6. 06:16 AM - Re: Kevin (Larry Vetter)
7. 06:25 AM - Re: prop clearence (bender)
8. 06:30 AM - Re: Kevin (TOM STINEMETZE)
9. 06:51 AM - Re: Re: Kevin (ken anderson)
10. 09:10 AM - Re: Thank you (Jim Boyer)
11. 09:30 AM - Re: Kevin (ldmill)
12. 10:28 AM - Re: Kevin (taildrags)
13. 01:13 PM - Kevin Purtee Update (IT Girl)
14. 01:42 PM - Re: Kevin Purtee Update (John Francis)
15. 02:43 PM - Re: Kevin Purtee Update (helspersew@aol.com)
16. 02:47 PM - Re: Kevin Purtee Update (Jim Boyer)
17. 03:14 PM - Re: motorcycle wheels - bronze bearings (nightmare)
18. 04:06 PM - Re: Re: motorcycle wheels - bronze bearings (Jeff Wilson)
19. 06:46 PM - Re: prop clearence (BYD)
20. 06:49 PM - Re: Re: motorcycle wheels - bronze bearings (TOM MICHELLE BRANT)
21. 07:47 PM - Re: Re: motorcycle wheels - bronze bearings (Clif Dawson)
22. 10:25 PM - Re: motorcycle wheels - bronze bearings engine Q, too. (jorge lizarraga)
23. 10:50 PM - Re: Kevin (Billy McCaskill)
24. 10:57 PM - Re: motorcycle wheels - bronze bearings (Billy McCaskill)
25. 11:19 PM - Re: Brodhead report (Billy McCaskill)
Message 1
| INDEX | Back to Main INDEX |
| NEXT | Skip to NEXT Message |
| LIST | Reply to LIST Regarding this Message |
| SENDER | Reply to SENDER Regarding this Message |
|
| Subject: | Re: prop clearence |
Hey Douwe,
I have 9 inches I believe. I held to Tony Bingelis' recommendation.
Dan Helsper
Puryear, TN
-----Original Message-----
From: Douwe Blumberg <douweblumberg@earthlink.net>
Sent: Mon, Jul 23, 2012 4:50 pm
Subject: Pietenpol-List: prop clearence
Hey all,
I=99m curious in the tail-up position what isyour prop clear
ance? Especially you Ford guys with the big props.
Thanks,
Douwe
Do not archive
Message 2
| INDEX | Back to Main INDEX |
| PREVIOUS | Skip to PREVIOUS Message |
| NEXT | Skip to NEXT Message |
| LIST | Reply to LIST Regarding this Message |
| SENDER | Reply to SENDER Regarding this Message |
|
Just adding our thoughts and prayers.
Matt and Lynne Paxton
Connected by DROID on Verizon Wireless
Message 3
| INDEX | Back to Main INDEX |
| PREVIOUS | Skip to PREVIOUS Message |
| NEXT | Skip to NEXT Message |
| LIST | Reply to LIST Regarding this Message |
| SENDER | Reply to SENDER Regarding this Message |
|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Message 4
| INDEX | Back to Main INDEX |
| PREVIOUS | Skip to PREVIOUS Message |
| NEXT | Skip to NEXT Message |
| LIST | Reply to LIST Regarding this Message |
| SENDER | Reply to SENDER Regarding this Message |
|
| Subject: | Re: motorcycle wheels - bronze bearings |
I bought my bronze, flanged, oilite bearings from McMaster Carr.- I made
my own hubs with no oil/grease cup.
Michael Perez
=0APietenpol HINT Videos
=0AKaretaker Aero
=0Awww.karetakeraero.com
=0A
Message 5
| INDEX | Back to Main INDEX |
| PREVIOUS | Skip to PREVIOUS Message |
| NEXT | Skip to NEXT Message |
| LIST | Reply to LIST Regarding this Message |
| SENDER | Reply to SENDER Regarding this Message |
|
So sorry to hear about Kevin.
You both are in my thoughts and prayers.
While it is difficult to know what to say in times like this, know that the
re are many folks here who care and will do anything we can to help.
I'm up at Oshkosh - if we can do ANYTHING to help - please don't hesitate t
o call.
Jon Apfelbaum
801-913-1211
DO NOT ARCHIVE
-----Original Message-----
From: Robert Bush <rbush96589@aol.com>
Sent: Tue, Jul 24, 2012 6:26 am
Subject: Re: Pietenpol-List: Kevin
Just wanted to say you are both in my thoughts and prayers as well. Any thi
ng I can do to help just ask.
Randy Bush
Sent from my iPhone
On Jul 24, 2012, at 6:56 AM, "woodflier@aol.com" <woodflier@aol.com> wrote:
Just adding our thoughts and prayers.
Matt and Lynne Paxton
Connected by DROID on Verizon Wireless
ky=EF=BD=EF=BD=EF=BD"=EF=BD=ED=9C=A2Z+=EF=BDM4=EF=BDG=EF
=BDq=EF=BD(=EF=BD=EF=BD=EF=BD=EF=BDw=EF=BDr=EF=BD
=EF=BD=EF=BD=EF=BD=D3=85=EF=BD=EF=BDz=D7=A7=EF=BD=EF
=BDK=EF=BD=EF=BDD=EF=BD=EF=BD=EF=BD=EF=BD=EF=BDK=EF
=BD=EF=BDj=EF=BD=EF=BD',.+-=E6=AD=BA=EF=BD=EF=BD5=EF=BD
=81=ABh=EF=BD=EF=BD=EF=BD=EF=BD,z=EF=BD^=EF=BD=EF
=BD=EF=BD.+-=EF=BD=D8=A5=EF=BD=D8=9E=EF=BD=CB=9C=EF=BD=EF
=BD=EF=BD=EF=BDT=EF=BD=EF=BDn=EF=BD+=EF=BD=EF=BDb=EF
=BDp+r=EF=BDy'=EF=BD=EF=BD=EF=BDC=EF=BD=E5=A1=A7{=EF
=BD=EF=BD=EF=BD=EF=BD,x(Z=EF=BDP>-=EF=BD=EF=BDZ=EF
=BD=EF=BDvk=EF=BD=EF=BDk=EF=BD=EF=BDj+y=EF=BDky=EF=BDm
=EF=BD=EF=BD=EF=BD=EF=BD&j=EF=BD=EF=BD',r=EF=BD=EF
=BD5=EF=BD=81=ABh=EF=BD=EF=BD=EF=BD=EF=BDR=EF=BD=EF
=BDm=EF=BD=EF=BD=EF=BD=EF=BD&j=EF=BD=EF=BD',r=EF=BD=EF
=BD5=EF=BD=81=ABh=EF=BD=EF=BD=EF=BD=EF=BDR=EF=BD=EF
=BD=EF=BD0=EF=BD8=EF=BDIa=EF=BDT1$=EF=BD=EF=BD=EF
=BD+y=EF=BD\=EF=BD{^=EF=BD=D6=A5=EF=BD=EF=BD=EF=BDj)ZnW
=EF=BD=EF=BD=EF=BDayg=EF=BD=EF=BD=EF=BD=C6=A1=EF=BD=EF
=BD=EF=BD=EF=BD =EF=BD=EF=BD+=EF=BDk&j=EF=BD=EF=BD'
,r=EF=BD=EF=BD=EF=BD=EF=BD =EF=BD=EF=BD+=EF=BDk&j=EF
=BD=EF=BD',r=EF=BD=EF=BDh=EF=BD=EF=BD=EF=BD*'=EF=BD
=EF=BD=EF=BD=EF=BD=D8=A8=EF=BDg=EF=BDJ+^N=EF=BD=EF=BD*
.~=EF=BD=EF=BD=EF=BD=EF=BDzw=EF=BD=EF=BD=EF=BD,=EF
=BD=EF=BDh=EF=BD=EF=BD=EF=BD=EF=BD=EF=BDjY^.+-=D9=A2=EF
=BD=EF=BDky=EF=BDm=EF=BD=EF=BD=EF=BD=EF=BD&j=EF=BD
=EF=BD',r=EF=BD=EF=BDr=EF=BD=EF=BD&=EF=BD*'=EF=BD=EF
=BDi=EF=BD=EF=BD0=EF=BDf=EF=BD=EF=BD=EF=BD=EF=BDr
=EF=BD(=EF=BD=EF=BD(=EF=BD=EF=BD=EF=BDn=EF=BDb=EF
=BD =EF=BD=EF=BD=DF=A2{ =EF=BD=EF=BD=EF=BDn=EF=BDr=EF
=BDf
Message 6
| INDEX | Back to Main INDEX |
| PREVIOUS | Skip to PREVIOUS Message |
| NEXT | Skip to NEXT Message |
| LIST | Reply to LIST Regarding this Message |
| SENDER | Reply to SENDER Regarding this Message |
|
Thoughts and prayers for Kevin, Shelly and their family...Also for Kevin's full
recovery.....Really sorry to hear this news.....
Larry & Sheri Vetter
Read this topic online here:
http://forums.matronics.com/viewtopic.php?p=379084#379084
Message 7
| INDEX | Back to Main INDEX |
| PREVIOUS | Skip to PREVIOUS Message |
| NEXT | Skip to NEXT Message |
| LIST | Reply to LIST Regarding this Message |
| SENDER | Reply to SENDER Regarding this Message |
|
| Subject: | Re: prop clearence |
Model A and 76" prop.....9 inches ..
jeff
Read this topic online here:
http://forums.matronics.com/viewtopic.php?p=379085#379085
Message 8
| INDEX | Back to Main INDEX |
| PREVIOUS | Skip to PREVIOUS Message |
| NEXT | Skip to NEXT Message |
| LIST | Reply to LIST Regarding this Message |
| SENDER | Reply to SENDER Regarding this Message |
|
Kevin and Shelly:
I was greatly saddened to hear of the accident. My ride with Kevin in FBG remains
one of the high points in my aviation career and I would dearly love to repeat
it one day in SpaceShip0.1. I have been praying for Kevin's speedy recovery
and for your peace of mind and will continue to do so.
The legend of Axel Purdy will only grow with this latest saga.
Tom Stinemetze
McPherson, KS.
Message 9
| INDEX | Back to Main INDEX |
| PREVIOUS | Skip to PREVIOUS Message |
| NEXT | Skip to NEXT Message |
| LIST | Reply to LIST Regarding this Message |
| SENDER | Reply to SENDER Regarding this Message |
|
Got home late sunday catching up on emails.
I am sorry to hear the news.
Thoughts and prayers are with you.
I read the list but rarely post
Ken Anderson
do not archive
On Tue, Jul 24, 2012 at 8:15 AM, Larry Vetter <vetter@evertek.net> wrote:
>
> Thoughts and prayers for Kevin, Shelly and their family...Also for Kevin's
> full recovery.....Really sorry to hear this news.....
> Larry & Sheri Vetter
>
>
> Read this topic online here:
>
> http://forums.matronics.com/viewtopic.php?p=379084#379084
>
>
Message 10
| INDEX | Back to Main INDEX |
| PREVIOUS | Skip to PREVIOUS Message |
| NEXT | Skip to NEXT Message |
| LIST | Reply to LIST Regarding this Message |
| SENDER | Reply to SENDER Regarding this Message |
|
Hi Shelley,
Just read email and saw messages about Kevin. Please know that Arlene and I will
keep you and Kevin in our prayers and hope for a speedy recovery.
Jim Boyer
Message 11
| INDEX | Back to Main INDEX |
| PREVIOUS | Skip to PREVIOUS Message |
| NEXT | Skip to NEXT Message |
| LIST | Reply to LIST Regarding this Message |
| SENDER | Reply to SENDER Regarding this Message |
|
Kevin & Shelly,
Our thoughts and prayers are with you. We pray for a full recovery.
Joshua was sad to hear about this - you gave him his very first airplane ride ever
on Saturday. He's one sad 18 year old right now.
Lorin Miller and Lance Miller
"The Iowa Boys"
--------
Lorin Miller
Waiex N81YX
GN-1 N30PP
Read this topic online here:
http://forums.matronics.com/viewtopic.php?p=379095#379095
Message 12
| INDEX | Back to Main INDEX |
| PREVIOUS | Skip to PREVIOUS Message |
| NEXT | Skip to NEXT Message |
| LIST | Reply to LIST Regarding this Message |
| SENDER | Reply to SENDER Regarding this Message |
|
I've only met Kevin and his airplane once, but that was enough to cement the relationship.
A true Pietenpoler, and a talented builder and pilot as well. I
offer my prayers for a speedy recovery along with those of others here and abroad.
There will be work to do, but he is fortunate to have his IT Girl at his
side and so many others of you also nearby. Sorry I am not closer.
do not archive
--------
Oscar Zuniga
Medford/Ashland, OR
Air Camper NX41CC "Scout"
A75 power
Read this topic online here:
http://forums.matronics.com/viewtopic.php?p=379101#379101
Attachments:
http://forums.matronics.com//files/kevin_oz_899.jpg
Message 13
| INDEX | Back to Main INDEX |
| PREVIOUS | Skip to PREVIOUS Message |
| NEXT | Skip to NEXT Message |
| LIST | Reply to LIST Regarding this Message |
| SENDER | Reply to SENDER Regarding this Message |
|
| Subject: | Kevin Purtee Update |
Kevin is awake, breathing on his own, and is doing great. He said that he is ready
for visitors, so anyone still in the area is welcome to stop by.
We are at UW in the TLC Room 19
--------
Shelley Tumino
IT Girl
wife of "Axel"
NX899KP
DO NOT ARCHIVE
Read this topic online here:
http://forums.matronics.com/viewtopic.php?p=379112#379112
Message 14
| INDEX | Back to Main INDEX |
| PREVIOUS | Skip to PREVIOUS Message |
| NEXT | Skip to NEXT Message |
| LIST | Reply to LIST Regarding this Message |
| SENDER | Reply to SENDER Regarding this Message |
|
| Subject: | Re: Kevin Purtee Update |
Thanks for the update Shelley. That's good news.
John
Do not archive
--------
John Francis
Read this topic online here:
http://forums.matronics.com/viewtopic.php?p=379114#379114
Message 15
| INDEX | Back to Main INDEX |
| PREVIOUS | Skip to PREVIOUS Message |
| NEXT | Skip to NEXT Message |
| LIST | Reply to LIST Regarding this Message |
| SENDER | Reply to SENDER Regarding this Message |
|
| Subject: | Re: Kevin Purtee Update |
"Praise the Lord!"
TGWP
do not archive
-----Original Message-----
From: IT Girl <shlizbth@gmail.com>
Sent: Tue, Jul 24, 2012 3:13 pm
Subject: Pietenpol-List: Kevin Purtee Update
Kevin is awake, breathing on his own, and is doing great. He said that he
is
ready for visitors, so anyone still in the area is welcome to stop by.
We are at UW in the TLC Room 19
--------
Shelley Tumino
IT Girl
wife of "Axel"
NX899KP
DO NOT ARCHIVE
Read this topic online here:
http://forums.matronics.com/viewtopic.php?p=379112#379112
Message 16
| INDEX | Back to Main INDEX |
| PREVIOUS | Skip to PREVIOUS Message |
| NEXT | Skip to NEXT Message |
| LIST | Reply to LIST Regarding this Message |
| SENDER | Reply to SENDER Regarding this Message |
|
| Subject: | Re: Kevin Purtee Update |
Hi Shelley,
That is wonderful news, wish I were there to see Kevin right now.
Please tell Kevin Arlene and I are praying for him and want him to be well soon.
Jim Boyer
Message 17
| INDEX | Back to Main INDEX |
| PREVIOUS | Skip to PREVIOUS Message |
| NEXT | Skip to NEXT Message |
| LIST | Reply to LIST Regarding this Message |
| SENDER | Reply to SENDER Regarding this Message |
|
| Subject: | Re: motorcycle wheels - bronze bearings |
was wondering what the advantage of bronze over modern bearings. thanks; Paul
Read this topic online here:
http://forums.matronics.com/viewtopic.php?p=379124#379124
Message 18
| INDEX | Back to Main INDEX |
| PREVIOUS | Skip to PREVIOUS Message |
| NEXT | Skip to NEXT Message |
| LIST | Reply to LIST Regarding this Message |
| SENDER | Reply to SENDER Regarding this Message |
|
| Subject: | Re: motorcycle wheels - bronze bearings |
Weight
Sent from my iPhone
On Jul 24, 2012, at 5:14 PM, "nightmare" <pauldonahuepilot@yahoo.com> wrote:
>
> was wondering what the advantage of bronze over modern bearings. thanks; Paul
>
>
>
>
> Read this topic online here:
>
> http://forums.matronics.com/viewtopic.php?p=379124#379124
>
>
>
>
>
>
>
>
>
>
Message 19
| INDEX | Back to Main INDEX |
| PREVIOUS | Skip to PREVIOUS Message |
| NEXT | Skip to NEXT Message |
| LIST | Reply to LIST Regarding this Message |
| SENDER | Reply to SENDER Regarding this Message |
|
| Subject: | Re: prop clearence |
Model A and 76" prop 19" wheels.....8.5 inches
--------
Please check with Larry "TC" Williams before archiving, otherwise,
DO NOT ARCHIVE
Read this topic online here:
http://forums.matronics.com/viewtopic.php?p=379128#379128
Message 20
| INDEX | Back to Main INDEX |
| PREVIOUS | Skip to PREVIOUS Message |
| NEXT | Skip to NEXT Message |
| LIST | Reply to LIST Regarding this Message |
| SENDER | Reply to SENDER Regarding this Message |
|
| Subject: | Re: motorcycle wheels - bronze bearings |
for me=2C I'm milling out the hubs and I want to remove as little material
as possible. But weight as said previously is also a good reason. Also=2C
inexpensive.
> From: jlwilsonnn@yahoo.com
> Subject: Re: Pietenpol-List: Re: motorcycle wheels - bronze bearings
> Date: Tue=2C 24 Jul 2012 18:06:28 -0500
> To: pietenpol-list@matronics.com
>
>
> Weight
>
> Sent from my iPhone
>
> On Jul 24=2C 2012=2C at 5:14 PM=2C "nightmare" <pauldonahuepilot@yahoo.co
m> wrote:
>
oo.com>
> >
> > was wondering what the advantage of bronze over modern bearings. thanks
=3B Paul
> >
> >
> >
> >
> > Read this topic online here:
> >
> > http://forums.matronics.com/viewtopic.php?p=379124#379124
> >
> >
> >
> >
> >
> >
> >
> >
> >
> >
>
>
===========
===========
===========
===========
>
>
>
Message 21
| INDEX | Back to Main INDEX |
| PREVIOUS | Skip to PREVIOUS Message |
| NEXT | Skip to NEXT Message |
| LIST | Reply to LIST Regarding this Message |
| SENDER | Reply to SENDER Regarding this Message |
|
| Subject: | Re: motorcycle wheels - bronze bearings |
ALL bearings in this thing are bronze journal bearings.
http://www.youtube.com/watch?v=nP1_4ymsIig&feature=relmfu
Also don't forget the engine in your car and plane.
journal bearings again.
Clif
> <pauldonahuepilot@yahoo.com>
>
> was wondering what the advantage of bronze over modern bearings. thanks;
> Paul
Message 22
| INDEX | Back to Main INDEX |
| PREVIOUS | Skip to PREVIOUS Message |
| NEXT | Skip to NEXT Message |
| LIST | Reply to LIST Regarding this Message |
| SENDER | Reply to SENDER Regarding this Message |
|
| Subject: | motorcycle wheels - bronze bearings engine Q, too. |
hello vi ,jorge for hanford congrat about your piet and all tose tales you
sending us , bery helpfull for novice like my, in these pas mont I coming b
ac fro mazatlan spend time whit my 4 year baby gilr and wife, when i bac to
fresno wesnelson my american fhader get for my a new aereo v engine vw con
vertion ,all complete include alot instrumet new bold tail weel, master cil
inder for brake selenoide and alot thinks , big wonder full surprice, these
parts coming fron kit unfinished dragon fly all new parts never used , i d
on now homany horse power i haved but dragon fly is aroun 80-90horse power
needed and 1835-2300. i think is ok for piet but I don have idea how put in
my plane , in these moment , cuting wooden strips from sticka spruce 86 st
rips for my ribs i used 1932 side ribs, probaly for the side used okumy ply
, I glon to now your almos fly your wonderfull museum piet plane, i hope ca
nd see these plane later tanks for all your post vi,jorge from
hanford
--- On Mon, 7/23/12, V Groah <vgroah@hotmail.com> wrote:
From: V Groah <vgroah@hotmail.com>
Subject: RE: Pietenpol-List: motorcycle wheels - bronze bearings
1 1/2 should be plenty.- The plane is not that heavy.- Ours are about t
hat and seem fine.
-
Vic NX414MV
-
do not archive
-
Subject: Re: Pietenpol-List: motorcycle wheels - bronze bearings
From: lmforge@earthlink.net
Tom,
Get them from Mcmaster Carr
Rick Schreiber
NX478RS
Valparaiso, In
Sent from my iPad
On Jul 23, 2012, at 8:36 PM, TOM MICHELLE BRANT <tmbrant@msn.com> wrote:
those that have used motorcycle wheels with Bronze bearings, - where did yo
u get your material for the bearings.- I'm assuming you used sleeved (fla
nged) bearing but I can only find stuff that's 1 1/2" long.- Was thinking
it should be the entire hub length.
Tom B.
3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=
3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=
3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=
3D
tor?Pietenpol-List%22" target=_blank>http://www.matronics.com/Navigator?P
ietenpol-List
3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=
3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=
3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=
3D
target=_blank>http://forums.matronics.com
3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=
3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=
3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=
3D
bution%22" target=_blank>http://www.matronics.com/contribution
3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=
3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=
3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=
3D
Message 23
| INDEX | Back to Main INDEX |
| PREVIOUS | Skip to PREVIOUS Message |
| NEXT | Skip to NEXT Message |
| LIST | Reply to LIST Regarding this Message |
| SENDER | Reply to SENDER Regarding this Message |
|
Wow, what a shock to hear about this. I'm just now finding out that Kevin had
this incident. My prayers are with you both, Kevin and Shelley! To repeat what
all of the list has said, if there is ANYTHING that any of us can do, please
don't hesitate to ask. We are ALL here for you both.
do not archive
--------
Billy McCaskill
Baker, LA
tail section almost done, starting on ribs soon
Read this topic online here:
http://forums.matronics.com/viewtopic.php?p=379135#379135
Message 24
| INDEX | Back to Main INDEX |
| PREVIOUS | Skip to PREVIOUS Message |
| NEXT | Skip to NEXT Message |
| LIST | Reply to LIST Regarding this Message |
| SENDER | Reply to SENDER Regarding this Message |
|
| Subject: | Re: motorcycle wheels - bronze bearings |
Because motorcycle wheels are taller, they already have much less rolling resistance
than short wheels like Cubs and such use, there is no need for the reduced
friction of roller or ball bearings in the hubs of motorcycle wheels. It also
eliminated the need for threading the ends of the axles for the adjusting/retaining
nuts required by ball or roller bearings. And at the low speeds they're
used at on an airplane, bronze with some grease in the hub is more than adequate.
--------
Billy McCaskill
Baker, LA
tail section almost done, starting on ribs soon
Read this topic online here:
http://forums.matronics.com/viewtopic.php?p=379136#379136
Message 25
| INDEX | Back to Main INDEX |
| PREVIOUS | Skip to PREVIOUS Message |
| NEXT | Skip to NEXT Message |
| LIST | Reply to LIST Regarding this Message |
| SENDER | Reply to SENDER Regarding this Message |
|
| Subject: | Re: Brodhead report |
Dan's report on this year's reunion was spot-on! All who were present missed those
of you who were not, and we all had a great time reuniting with each other
and meeting new faces that go with the names on the Matronics list. This was
my 4th consecutive trip, and I certainly plan to be there next year as well.
Dan certainly made up for lost time when he started giving the rides in his
gorgeous airplane, and I was fortunate to get two flights in it this past weekend.
Thanks Dan, it was fabulous! And thanks to Shelley for playing den mother
to the rest of us misfits and infidels who camped in the cove, you took great
care of all of us. A great time was had by all, and I'm counting the days
until Brodhead 2013!
--------
Billy McCaskill
Baker, LA
tail section almost done, starting on ribs soon
Read this topic online here:
http://forums.matronics.com/viewtopic.php?p=379137#379137
Other Matronics Email List Services
These Email List Services are sponsored solely by Matronics and through the generous Contributions of its members.
-- Please support this service by making your Contribution today! --
|