---------------------------------------------------------- Pietenpol-List Digest Archive --- Total Messages Posted Fri 09/21/12: 11 ---------------------------------------------------------- Today's Message Index: ---------------------- 1. 04:35 AM - Re: spam apology (Michael Perez) 2. 04:56 AM - Re: spam apology (Greg Bacon) 3. 05:05 AM - Re: spam apology (Michael Perez) 4. 05:10 AM - Re: NAS3 Assembly Bolts (Michael Perez) 5. 05:25 AM - Re: spam apology (curtdm(at)gmail.com) 6. 05:36 AM - Re: Re: spam apology (Gary Boothe) 7. 05:42 AM - Re: NAS3 Assembly Bolts (Ryan Mueller) 8. 05:50 AM - Re: NAS3 Assembly Bolts (Michael Perez) 9. 08:38 AM - Re: Re: Douwe Blumberg Please (Dick N) 10. 08:54 PM - aileron cable tension (nightmare) 11. 09:02 PM - Re: Jeff's external aileron cables (Bill Church) ________________________________ Message 1 _____________________________________ Time: 04:35:51 AM PST US From: Michael Perez Subject: Re: Pietenpol-List: spam apology Not your fault. How did you fix the issue? Michael Perez Pietenpol HINT Videos Karetaker Aero www.karetakeraero.com ________________________________ Message 2 _____________________________________ Time: 04:56:46 AM PST US Subject: Re: Pietenpol-List: spam apology From: Greg Bacon Forget this "Not your fault" baloney! Douwe's negligence has clearly slightly almost offended most of us and a settlement is warranted. I suggest a ride in his Piet as restitution for each that received the spamish email. I volunteer to go first to make sure everything is safe. :-) Greg Do Not Archive On Fri, Sep 21, 2012 at 6:35 AM, Michael Perez wrote: > Not your fault. How did you fix the issue? > > Michael Perez > Pietenpol HINT Videos > Karetaker Aero > www.karetakeraero.com > > ** > > * > > * > > -- Greg Bacon ________________________________ Message 3 _____________________________________ Time: 05:05:23 AM PST US From: Michael Perez Subject: Re: Pietenpol-List: spam apology I'm down with that! I'm next! Perhaps I can get the master craftsman to make me a small hood ornament for my plane...? Michael Perez Pietenpol HINT Videos Karetaker Aero www.karetakeraero.com ________________________________ Message 4 _____________________________________ Time: 05:10:56 AM PST US From: Michael Perez Subject: Re: Pietenpol-List: NAS3 Assembly Bolts It sounds like you have a NAS3A - something. The 3B does not have the mixtu re control and that location is just blocked off with an aluminum plate. Th ere are no internals inside at all. You can remove the mixture hardware and block it off, but I am not sure how/if you would need to re-name the carb. - If you decide later to go back, or sell the carb., just leave the name the same and reassemble it. To answer you question more directly, the mixture would need to be wired fu ll open, (rich) to the nearest bolt, nut, etc. Michael Perez =0APietenpol HINT Videos =0AKaretaker Aero =0Awww.karetakeraero.com =0A ________________________________ Message 5 _____________________________________ Time: 05:25:14 AM PST US Subject: Pietenpol-List: Re: spam apology From: "curtdm(at)gmail.com" Rides sound great! I received the e-mail twice! -------- Curt Merdan Flower Mound, TX Do Not Archive Read this topic online here: http://forums.matronics.com/viewtopic.php?p=383700#383700 ________________________________ Message 6 _____________________________________ Time: 05:36:55 AM PST US From: "Gary Boothe" Subject: RE: Pietenpol-List: Re: spam apology I received it twice, too; however, I opened it. I'm now $500 million richer!! (I think).... Gary Boothe NX308MB -----Original Message----- From: owner-pietenpol-list-server@matronics.com [mailto:owner-pietenpol-list-server@matronics.com] On Behalf Of curtdm(at)gmail.com Sent: Friday, September 21, 2012 5:25 AM Subject: Pietenpol-List: Re: spam apology --> Rides sound great! I received the e-mail twice! -------- Curt Merdan Flower Mound, TX Do Not Archive Read this topic online here: http://forums.matronics.com/viewtopic.php?p=383700#383700 ________________________________ Message 7 _____________________________________ Time: 05:42:28 AM PST US From: Ryan Mueller Subject: Re: Pietenpol-List: NAS3 Assembly Bolts He has a Marvel Schebler=85=85.different carb, different manufacturer On Sep 21, 2012, at 7:10 AM, Michael Perez wrote: > > It sounds like you have a NAS3A - something. The 3B does not have the mixture control and that location is just blocked off with an aluminum plate. There are no internals inside at all. You can remove the mixture hardware and block it off, but I am not sure how/if you would need to re-name the carb. If you decide later to go back, or sell the carb., just leave the name the same and reassemble it. > > To answer you question more directly, the mixture would need to be wired full open, (rich) to the nearest bolt, nut, etc. > > Michael Perez > Pietenpol HINT Videos > Karetaker Aero > www.karetakeraero.com > > > > ________________________________ Message 8 _____________________________________ Time: 05:50:37 AM PST US From: Michael Perez Subject: Re: Pietenpol-List: NAS3 Assembly Bolts Ah yes, he did mention that it was a Marvel...I missed it. Michael Perez Pietenpol HINT Videos Karetaker Aero www.karetakeraero.com ________________________________ Message 9 _____________________________________ Time: 08:38:17 AM PST US From: "Dick N" Subject: Re: Pietenpol-List: Re: Douwe Blumberg Please I got the same e mail and responded to it, big mistake, now my computer wont work from home. I'm at Mc Donalds now till I get this computer thing figured out. Dick N. ----- Original Message ----- From: "jarheadpilot82" Sent: Thursday, September 20, 2012 10:43 AM Subject: Pietenpol-List: Re: Douwe Blumberg Please > > > I got on the phone and called Douwe directly, in case the hacking had also > affected his computer and did not allow him to access the forum. He is > aware of it and is having it dealt with by a technician. > > Just thought I would go direct, but post it here so as to prevent anyone > else from calling unnecessarily, as he is aware of the problem. > > -------- > Semper Fi, > > Terry Hand > Athens, GA > > > Read this topic online here: > > http://forums.matronics.com/viewtopic.php?p=383610#383610 > > > ________________________________ Message 10 ____________________________________ Time: 08:54:33 PM PST US Subject: Pietenpol-List: aileron cable tension From: "nightmare" i may be removing wings fairly often and was wondering if aileron cable tension is light enough to be able to disconnect and reconnect with clevis pin and not loosening the turnbuckle? Paul -------- Paul Donahue Started 8-3-12 do not archive Read this topic online here: http://forums.matronics.com/viewtopic.php?p=383759#383759 ________________________________ Message 11 ____________________________________ Time: 09:02:10 PM PST US Subject: Pietenpol-List: Re: Jeff's external aileron cables From: "Bill Church" Upper wing? Read this topic online here: http://forums.matronics.com/viewtopic.php?p=383760#383760 ------------------------------------------------------------------------------------- Other Matronics Email List Services ------------------------------------------------------------------------------------- Post A New Message pietenpol-list@matronics.com UN/SUBSCRIBE http://www.matronics.com/subscription List FAQ http://www.matronics.com/FAQ/Pietenpol-List.htm Web Forum Interface To Lists http://forums.matronics.com Matronics List Wiki http://wiki.matronics.com Full Archive Search Engine http://www.matronics.com/search 7-Day List Browse http://www.matronics.com/browse/pietenpol-list Browse Digests http://www.matronics.com/digest/pietenpol-list Browse Other Lists http://www.matronics.com/browse Live Online Chat! http://www.matronics.com/chat Archive Downloading http://www.matronics.com/archives Photo Share http://www.matronics.com/photoshare Other Email Lists http://www.matronics.com/emaillists Contributions http://www.matronics.com/contribution ------------------------------------------------------------------------------------- These Email List Services are sponsored solely by Matronics and through the generous Contributions of its members.