---------------------------------------------------------- Pietenpol-List Digest Archive --- Total Messages Posted Sun 11/04/12: 27 ---------------------------------------------------------- Today's Message Index: ---------------------- 1. 04:38 AM - Fly-in Crestview,FL (Jerry Dotson) 2. 05:26 AM - small world! (Douwe Blumberg) 3. 05:36 AM - Re: Fly-in Crestview,FL (Amsafetyc) 4. 06:00 AM - Re: small world! (Matthew) 5. 08:12 AM - Re: Stupendous camera work (nightmare) 6. 09:12 AM - Re: small world! (dewey davenport) 7. 10:22 AM - Re: Missing Conversation... (Matt Dralle) 8. 10:31 AM - Re: A cold fall flight... (shad bell) 9. 10:47 AM - Re: Missing Conversation... (K5YAC) 10. 11:03 AM - Re: Re: Missing Conversation... (Matt Dralle) 11. 12:50 PM - First engine run today! NX898H (Gene Rambo) 12. 01:10 PM - Re: First engine run today! NX898H (Gary Boothe) 13. 01:15 PM - Re: First engine run today! NX898H (Gene Rambo) 14. 01:20 PM - Re: First engine run today! NX898H (Jack Phillips) 15. 04:21 PM - Re: First engine run today! NX898H (AMsafetyC@aol.com) 16. 04:25 PM - A good day building (Jack) 17. 04:47 PM - Re: First engine run today! NX898H (FandS_Piet) 18. 05:05 PM - Re: A good day building (Scott Knowlton) 19. 05:25 PM - Re: A good day building (Gary Boothe) 20. 05:28 PM - Re: First engine run today! NX898H (Gary Boothe) 21. 05:33 PM - Re: A good day building (dgaldrich) 22. 05:41 PM - Re: First engine run today! NX898H (Gene Rambo) 23. 05:45 PM - Re: First engine run today! NX898H (K5YAC) 24. 05:50 PM - sunset flight (Michael Groah) 25. 05:56 PM - Re: First engine run today! NX898H (Ryan Mueller) 26. 06:08 PM - Re: sunset flight (Gary Boothe) 27. 06:26 PM - Re: sunset flight (Michael Groah) ________________________________ Message 1 _____________________________________ Time: 04:38:32 AM PST US Subject: Pietenpol-List: Fly-in Crestview,FL From: "Jerry Dotson" I got an invite to Emeraldcoast Aviation's open house/fly-in at KCEW so I flew over yesterday. I was not expecting much but was pleasantly surprised. Near 50 airplanes flew in. I forgot my camera so no pictures :( There were only 3 experimentals there, the rest being mostly Piper and Cessna. An immaculate J-3, a very nice Tri-pacer and a couple of Aeronca Champs. For the ones that remember the TV series "SKY KING" and his Songbird there was a 1956 Cessna 310 there that is beyond my description. It was painted black, fully restored from nose to tail. It had all steam gauges recently rebuilt. Guess what. My Piet was parked close by and they all came over to see the Piet! A crew of onlookers around it all afternoon. -------- Jerry Dotson First flight June 16,2012 Started building July, 2009 Lycoming O-235 C2C Jay Anderson CloudCars prop 76 X 44 do not archive Read this topic online here: http://forums.matronics.com/viewtopic.php?p=386717#386717 ________________________________ Message 2 _____________________________________ Time: 05:26:59 AM PST US From: "Douwe Blumberg" Subject: Pietenpol-List: small world! WOW DAVE!! What a small world!! THANKS so much for the pics!!! IF you have anymore, I'd love to see them as I don't have many with me piloting. You can email me offline at douweblumberg@earthlink.net Let me know when you're at the airport and I'll try to fly over, or we can meet up at Waynesville where she's stationed for the next two weeks. Congrats Dan and Jeff on the sale and the purchase of a great plane!! Douwe Ps. Weather looks good for thurs or fri so I'm going to try to fly one or both of those days. If anyone is around the Waynesville area let's meet up. ________________________________ Message 3 _____________________________________ Time: 05:36:02 AM PST US Subject: Re: Pietenpol-List: Fly-in Crestview,FL From: Amsafetyc Sounds perfect Sent from my iPhone On Nov 4, 2012, at 7:38 AM, "Jerry Dotson" wrote: > > I got an invite to Emeraldcoast Aviation's open house/fly-in at KCEW so I flew over yesterday. I was not expecting much but was pleasantly surprised. Near 50 airplanes flew in. I forgot my camera so no pictures :( There were only 3 experimentals there, the rest being mostly Piper and Cessna. An immaculate J-3, a very nice Tri-pacer and a couple of Aeronca Champs. For the ones that remember the TV series "SKY KING" and his Songbird there was a 1956 Cessna 310 there that is beyond my description. It was painted black, fully restored from nose to tail. It had all steam gauges recently rebuilt. Guess what. My Piet was parked close by and they all came over to see the Piet! A crew of onlookers around it all afternoon. > > -------- > Jerry Dotson > > First flight June 16,2012 > Started building July, 2009 > Lycoming O-235 C2C > Jay Anderson CloudCars prop 76 X 44 > do not archive > > > > > Read this topic online here: > > http://forums.matronics.com/viewtopic.php?p=386717#386717 > > > > > > > > > > ________________________________ Message 4 _____________________________________ Time: 06:00:08 AM PST US Subject: Re: Pietenpol-List: small world! From: Matthew How late are you going to be around the airport Friday? I can be there aroun d 4 an would love to take a look! Matthew VanDervort Sent from my iPhone On Nov 4, 2012, at 8:27 AM, "Douwe Blumberg" w rote: > WOW DAVE!! > > What a small world!! > > THANKS so much for the pics!!! IF you have anymore, I=99d love to s ee them as I don=99t have many with me piloting. You can email me off line at douweblumberg@earthlink.net > > Let me know when you=99re at the airport and I=99ll try to fly over, or we can meet up at Waynesville where she=99s stationed for th e next two weeks. > > Congrats Dan and Jeff on the sale and the purchase of a great plane!! > > Douwe > > Ps. Weather looks good for thurs or fri so I=99m going to try to fl y one or both of those days. If anyone is around the Waynesville area let =99s meet up. > > ========================== ========= ========================== ========= ========================== ========= ========================== ========= > ________________________________ Message 5 _____________________________________ Time: 08:12:04 AM PST US Subject: Pietenpol-List: Re: Stupendous camera work From: "nightmare" great photos, thank you for posting! -------- Paul Donahue Started 8-3-12 do not archive Read this topic online here: http://forums.matronics.com/viewtopic.php?p=386732#386732 ________________________________ Message 6 _____________________________________ Time: 09:12:06 AM PST US From: dewey davenport Subject: Re: Pietenpol-List: small world! Douwe=0AI will be getting back home late Monday. I will be available anytim e after that. If the temp is in the 40's, I doubt I will be flying the piet but I can bring the Champ over to Waynesville for a visit. I enjoyed readi ng about the flight you did a couple mornings ago. When=C2-I read=C2-yo ur story, I was able to visualize myself taking off and flying around Wayne sville, Caesar Creek,and the=C2-fuel tanks at Lebanon Warren County airpo rt, and etc. Sounded like a blast.=0A=C2-=0AIf weather holds on Thursday or Friday, plan on some good grass-rooting around the area.=0A=C2-=0ADewe y=0A =0A=0A________________________________=0A From: Douwe Blumberg =0ATo: pietenpolgroup =0ASent: Sunday, November 4, 2012 5:27 AM=0ASubject: Pietenpol-List: small world!=0A =0A=0A =0AWOW DAVE!! =0A=C2- =0AWhat a small world!! =0A=C2- =0ATHANKS so much for the pics!!!=C2- IF you have anymore, I=99d =0Alove to see them as I don=99t have many with me piloting.=C2- Yo u can=0Aemail me offline at douweblumberg@earthlink.net =0A=C2- =0ALet me know when you=99re at the airport and I=99ll=0Atry to fly over , or we can meet up at Waynesville where she=99s stationed=0Afor the next two weeks. =0A=C2- =0ACongrats Dan and Jeff on the sale and the purc hase of a=0Agreat plane!! =0A=C2- =0ADouwe =0A=C2- =0APs.=C2- Weather looks good for thurs or fri so I=99m=0Agoing to try to fly one or bo th of those days.=C2- If anyone is around the=0AWaynesville area let == ________________________________ Message 7 _____________________________________ Time: 10:22:28 AM PST US From: Matt Dralle Subject: Re: Pietenpol-List: Missing Conversation... At 08:42 PM 11/3/2012 Saturday, you wrote: > >As an example, in this thread it is clear that Ray is responding to a comment that Gary made in reference to Douwe's most recent report. > >http://forums.matronics.com/viewtopic.php?t=93484&sid=050cc831f5c323faf06269b797dca07c > >But there is no sign of Gary's comment on Douwe's thread... > >http://forums.matronics.com/viewtopic.php?t=93478 Piet'rs, I had a look into this this morning. Seems that there was some formatting or encoding in Gary's message that the Forum importer didn't like and bombed out on. I took the original message and clean up some of the headers and then resubmitted it to the Fourm importer and it worked as expected: http://forums.matronics.com/viewtopic.php?t=93484 I'm not sure exactly what's causing the importer to crap out. But I'll keep looking. Don't forget that you can always catch up on the threaded messages using the List Browse feature, too: http://www.matronics.com/listbrowse/pietenpol-list/index.html Best regards, Matt Dralle Matronics Email List and Forums Admin Matt G Dralle | Matronics | 581 Jeannie Way | Livermore | CA | 94550 925-606-1001 V | 925-606-6281 F | dralle@matronics.com Email http://www.matronics.com/ WWW | Featuring Products For Aircraft ________________________________ Message 8 _____________________________________ Time: 10:31:59 AM PST US From: shad bell Subject: RE: Pietenpol-List: A cold fall flight... Douwe, You are not too far from me are you.=C2- Waynesville and s/w ohio is only about an hours flight for me.=C2- I will have to make sure to let you know when I have the next Ohio Piet Gathering. =C2- Shad --- On Sat, 11/3/12, Jack Phillips wrote: From: Jack Phillips Subject: RE: Pietenpol-List: A cold fall flight... Nice writeup, Douwe. =C2- I find the same thing, after flying a long leg of a cross-country, I tend t o land about 3=99 above the runway.=C2- I find it best to make a fu ll pattern to get some turns in to sort of get the feel of the airplane bac k.=C2- Worst is if I make a straight-in approach.=C2- I need to make at least one turn, to have any chance at a decent landing. =C2- Jack Phillips NX899JP Smith Mountain Lake, Virginia =C2- From: owner-pietenpol-list-server@matronics.com [mailto:owner-pietenpol-lis t-server@matronics.com] On Behalf Of Douwe Blumberg Sent: Saturday, November 03, 2012 4:02 PM Subject: Pietenpol-List: A cold fall flight... =C2- Forecast said this would be a cool, cloudy but very still day.=C2- Got to the airport at 11:00am, it was about 40 degrees.=C2- I was interested in how cold it would feel, and excited because this would be my first chance to use the WWII vintage leather flying coveralls I purchased years ago Chri s Bobka during the building/dreaming stage. =C2- Fueled up with twelve gallons of 100ll.=C2- Suit felt great, clearly desi gned for sitting, though it was hard to get my harness on.=C2- Earplugs i n, leather helmet on, goggles on (I need these with my windscreens or else my eyes water all the time and burn the next day).=C2- Pointed her nose d own the runway (not into the wind, as there wasn=99t any) and took of into a leaden sky for a later morning patrol.=C2- =C2- The C-90/Cloud Car prop combo turns up about 2475 on climbout, though I kep t the nose down to keep the engine cool as she=99s still breaking in. =C2- Turned away to find the local lake while I climbed to 3,000.=C2- P roceeded to explore both power on and power off stalls.=C2- I can feel ab solutely NO buffet before either.=C2- I=99m trying to train myself to feel when she=99s on the edge, but the best I can come up with is a mushy feel on the elevators.=C2- If I didn=99t have earplugs, I =99m sure the sounds would be a giveaway as well.=C2- She stalls st raight ahead power on and power off.=C2- =C2- After I played around with that for a while, I decided to see if my refurbi shed Garmin 196 was working so I flew over to Lebanon/Warren County, led me right there.=C2- Overflew it and decided now was as good a time as ever to try an asphalt landing, so got into the pattern and did one fly by down the runway to get a feel for it.=C2- Set up again and everything went rea lly well, three-pointed it on and she stayed nice and straight.=C2- I lik e the bungees being pretty firm, she just seems to squat onto the pavement. =C2- As I gave her the gas to go around, I noticed a guy running out with a camera so gave him some smoke, knowing I=9Dd have to clean her up later because I=99ve not installed the longer downpipes on my exhaust , but what the heck! I remember being that guy for most of my life!! Did another nice landing and headed home. =C2- Approaching the field I saw about a half dozen parachutes over the field so I flew right through them with smoke going NO, JUST KIDDING I peeled off and hung out of range =98til the last one landed the n came in for a landing.=C2- However, by now, it=99s been almost an hour and I guess I=99m colder than I thought (my teeth were almost c hattering) and I plunked her down from too high.=C2- Guess I was in some sort of cold stupor or something.=C2- Ticked me off so I went around and did it twice more, both of them nice.=C2- Good lesson to learn, that you can get kind of numb when it=99s cold, or after a long flight. =C2- First raindrops started to fall as I taxied to the hangar.=C2- Went to Mc donalds and got some coffee and drove home. =C2- God is good! =C2- Keep building, it=99s worth it!!! =C2- Douwe =C2- =C2- =C2- =C2-www.buildersbooks.comhttp://www.matronics.com/Navigator ?Pietenpol-Listhttp://forums.matronics.com =C2- ________________________________ Message 9 _____________________________________ Time: 10:47:39 AM PST US Subject: Pietenpol-List: Re: Missing Conversation... From: "K5YAC" Thanks Matt! I've noticed that this has occurred several times in the past weeks/months where I see comments on a topic that are in response to a post that isn't available on the web. Sometimes the original post is included in the reply and I can catch up that way, but often it's not, which leads me to believe that some of us are missing parts of conversations that we didn't even know occurred. Are there any pointers you can give us on proper formatting that might help, or is it just the way that certain some clients are handling outgoing messages, and perhaps out of the users control? -------- Mark Chouinard Wings, Center Section and Empannage and Fuse framed up - Working on Landing Gear Read this topic online here: http://forums.matronics.com/viewtopic.php?p=386746#386746 ________________________________ Message 10 ____________________________________ Time: 11:03:52 AM PST US From: Matt Dralle Subject: Re: Pietenpol-List: Re: Missing Conversation... Actually, yes, there is some configuration that users can do to grease the process. Most email clients allow you to configure the type of encoding that is used when sending the messages. Two of the most common are "Plain-Text" and "HTML". These days, by default, most clients will send BOTH a Plain-Text and an HTML version of the message within the body. MIME is used to wrap these two versions up and the receiving client picks which version it wants to view. When posting messages to the Lists and Forums, its always better, faster, and more reliable to send JUST the Plain-Text version. Generally you can go into your email client and select how Sent messages are encoded. Select just "Plain-Text". This will make posts the Lists and Forums a LOT cleaner and work much more smoothly. Matt Dralle Matronics Email List and Forum Admin At 10:47 AM 11/4/2012 Sunday, you wrote: > >Thanks Matt! I've noticed that this has occurred several times in the past weeks/months where I see comments on a topic that are in response to a post that isn't available on the web. Sometimes the original post is included in the reply and I can catch up that way, but often it's not, which leads me to believe that some of us are missing parts of conversations that we didn't even know occurred. > >Are there any pointers you can give us on proper formatting that might help, or is it just the way that certain some clients are handling outgoing messages, and perhaps out of the users control? > >-------- >Mark Chouinard >Wings, Center Section and Empannage and Fuse framed up - Working on Landing Gear ________________________________ Message 11 ____________________________________ Time: 12:50:33 PM PST US From: Gene Rambo Subject: Pietenpol-List: First engine run today! NX898H OK=2C got grief for not posting photos=2C so here is a video shot today of first engine run. Brett Phillips came and helped out=2C and after chasing initial water and fuel leaks=2C we got it running and put nearly an hour on it off and on. Ran it to full power briefly a couple of times=2C can't wa it to get the fish scale=2C I think it'll break it! LOL Finalize a few eng ine items=2C trim a few areas of the cowling=2C and all is ready to paint a nd install. Wing is almost ready to shoot silver=2C then color. Planning on first flight as soon as the weather warms up in the spring. Brodhead FO R SURE this year=2C Jack and Matt=2C get ready . . . Douwe=2C we'll meet yo u on the way. Now we need to get Brett to get to work on his airpland and have a REAL squadron headed west! Gene Rambo Here is the link to youtube: h ttp://youtu.be/9MB3W6QpkLE ________________________________ Message 12 ____________________________________ Time: 01:10:17 PM PST US From: "Gary Boothe" Subject: RE: Pietenpol-List: First engine run today! NX898H I'll be damned! Black & yellow.I had no idea! Sounds great, Gene!! Gary Boothe NX308MB From: owner-pietenpol-list-server@matronics.com [mailto:owner-pietenpol-list-server@matronics.com] On Behalf Of Gene Rambo Sent: Sunday, November 04, 2012 12:50 PM Subject: Pietenpol-List: First engine run today! NX898H OK, got grief for not posting photos, so here is a video shot today of first engine run. Brett Phillips came and helped out, and after chasing initial water and fuel leaks, we got it running and put nearly an hour on it off and on. Ran it to full power briefly a couple of times, can't wait to get the fish scale, I think it'll break it! LOL Finalize a few engine items, trim a few areas of the cowling, and all is ready to paint and install. Wing is almost ready to shoot silver, then color. Planning on first flight as soon as the weather warms up in the spring. Brodhead FOR SURE this year, Jack and Matt, get ready . . . Douwe, we'll meet you on the way. Now we need to get Brett to get to work on his airpland and have a REAL squadron headed west! Gene Rambo Here is the link to youtube: http://youtu.be/9MB3W6QpkLE ________________________________ Message 13 ____________________________________ Time: 01:15:40 PM PST US From: Gene Rambo Subject: RE: Pietenpol-List: First engine run today! NX898H why? Is there already a black and yellow one out there?? Gene From: gboothe5@comcast.net Subject: RE: Pietenpol-List: First engine run today! NX898H I=92ll be damned! Black & yellow=85I had no idea! Sounds great=2C Gene!! Ga ry BootheNX308MB From: owner-pietenpol-list-server@matronics.com [mailto:ow ner-pietenpol-list-server@matronics.com] On Behalf Of Gene Rambo Sent: Sunday=2C November 04=2C 2012 12:50 PM Subject: Pietenpol-List: First engine run today! NX898H OK=2C got grief for not posting photos=2C so here is a video shot today of first engine run. Brett Phillips came and helped out=2C and after chasing initial water and f uel leaks=2C we got it running and put nearly an hour on it off and on. Ra n it to full power briefly a couple of times=2C can't wait to get the fish scale=2C I think it'll break it! LOL Finalize a few engine items=2C trim a few areas of the cowling=2C and all i s ready to paint and install. Wing is almost ready to shoot silver=2C then color. Planning on first flight as soon as the weather warms up in the sp ring. Brodhead FOR SURE this year=2C Jack and Matt=2C get ready . . . Douw e=2C we'll meet you on the way. Now we need to get Brett to get to work on his airpland and have a REAL squadron headed west! Gene Rambo Here is the link to youtube: http://youtu.be/9MB3W6QpkLE www.aeroelectric.comwww.buildersbooks.comwww.homebuilthelp.comhttp://www .matronics.com/contributionhttp://www.matronics.com/Navigator?Pietenpol-Lis thttp://forums.matronics.com ________________________________ Message 14 ____________________________________ Time: 01:20:37 PM PST US From: "Jack Phillips" Subject: RE: Pietenpol-List: First engine run today! NX898H Looks good! Sounds good! I'll bet she'll FLY good! I'll be ready to fly to Brodhead in the Virginia Squadron next year. Jack Phillips NX899JP Smith Mountain Lake, Virginia _____ From: owner-pietenpol-list-server@matronics.com [mailto:owner-pietenpol-list-server@matronics.com] On Behalf Of Gene Rambo Sent: Sunday, November 04, 2012 3:50 PM Subject: Pietenpol-List: First engine run today! NX898H OK, got grief for not posting photos, so here is a video shot today of first engine run. Brett Phillips came and helped out, and after chasing initial water and fuel leaks, we got it running and put nearly an hour on it off and on. Ran it to full power briefly a couple of times, can't wait to get the fish scale, I think it'll break it! LOL Finalize a few engine items, trim a few areas of the cowling, and all is ready to paint and install. Wing is almost ready to shoot silver, then color. Planning on first flight as soon as the weather warms up in the spring. Brodhead FOR SURE this year, Jack and Matt, get ready . . . Douwe, we'll meet you on the way. Now we need to get Brett to get to work on his airpland and have a REAL squadron headed west! Gene Rambo Here is the link to youtube: http://youtu.be/9MB3W6QpkLE ________________________________ Message 15 ____________________________________ Time: 04:21:26 PM PST US From: AMsafetyC@aol.com Subject: Re: Pietenpol-List: First engine run today! NX898H Gene, lookin good soundin good! John ________________________________ Message 16 ____________________________________ Time: 04:25:07 PM PST US From: "Jack" Subject: Pietenpol-List: A good day building Tried out my new powder coat oven, you have to watch the heat close. Works great for the longer parts. Jack Textor ________________________________ Message 17 ____________________________________ Time: 04:47:14 PM PST US Subject: Pietenpol-List: Re: First engine run today! NX898H From: "FandS_Piet" Gene, Looks great. Do you recall the size of your wheels. Particularly the width? Also did you use the Frank Pavliga method to shave your tires? A chainsaw? -------- Fred Kim Pittsburgh, Pa Read this topic online here: http://forums.matronics.com/viewtopic.php?p=386774#386774 ________________________________ Message 18 ____________________________________ Time: 05:05:56 PM PST US From: "Scott Knowlton " Subject: Re: Pietenpol-List: A good day building Jack, great looking parts and nice oven. I've had my control horns and cabane fittings powder coated at a local coating company and it wasn't cheap! I'd love to do the rest of my parts on my own. Can you give us the Readers Digest condensed version of your set-up for the oven as well as the application of the powder coating material? Scott Knowlton -----Original Message----- From: Jack Subject: Pietenpol-List: A good day building Tried out my new powder coat oven, you have to watch the heat close. Works great for the longer parts. <<...>> <<...>> Jack Textor ________________________________ Message 19 ____________________________________ Time: 05:25:58 PM PST US From: "Gary Boothe" Subject: RE: Pietenpol-List: A good day building Very cool, Jack!! Gary Boothe NX308MB From: owner-pietenpol-list-server@matronics.com [mailto:owner-pietenpol-list-server@matronics.com] On Behalf Of Jack Sent: Sunday, November 04, 2012 4:24 PM Subject: Pietenpol-List: A good day building Tried out my new powder coat oven, you have to watch the heat close. Works great for the longer parts. <<...>> <<...>> Jack Textor ________________________________ Message 20 ____________________________________ Time: 05:28:20 PM PST US From: "Gary Boothe" Subject: RE: Pietenpol-List: First engine run today! NX898H Nope.not that I recall. ;-) Gary Boothe NX308MB From: owner-pietenpol-list-server@matronics.com [mailto:owner-pietenpol-list-server@matronics.com] On Behalf Of Gene Rambo Sent: Sunday, November 04, 2012 1:15 PM Subject: RE: Pietenpol-List: First engine run today! NX898H why? Is there already a black and yellow one out there?? Gene _____ From: gboothe5@comcast.net Subject: RE: Pietenpol-List: First engine run today! NX898H I'll be damned! Black & yellow.I had no idea! Sounds great, Gene!! Gary Boothe NX308MB From: owner-pietenpol-list-server@matronics.com [mailto:owner-pietenpol-list-server@matronics.com] On Behalf Of Gene Rambo Sent: Sunday, November 04, 2012 12:50 PM Subject: Pietenpol-List: First engine run today! NX898H OK, got grief for not posting photos, so here is a video shot today of first engine run. Brett Phillips came and helped out, and after chasing initial water and fuel leaks, we got it running and put nearly an hour on it off and on. Ran it to full power briefly a couple of times, can't wait to get the fish scale, I think it'll break it! LOL Finalize a few engine items, trim a few areas of the cowling, and all is ready to paint and install. Wing is almost ready to shoot silver, then color. Planning on first flight as soon as the weather warms up in the spring. Brodhead FOR SURE this year, Jack and Matt, get ready . . . Douwe, we'll meet you on the way. Now we need to get Brett to get to work on his airpland and have a REAL squadron headed west! Gene Rambo Here is the link to youtube: http://youtu.be/9MB3W6QpkLE www.aeroelectric.com www.buildersbooks.com www.homebuilthelp.com http://www.matronics.com/contribution http://www.matronics.com/Navigator?Pietenpol-List http://forums.matronics.com _blank">www.aeroelectric.com " target="_blank">www.buildersbooks.com ="_blank">www.homebuilthelp.com ="_blank">http://www.matronics.com/contribution st" target="_blank">http://www.matronics.com/Navigator?Pietenpol-List http://forums.matronics.com ________________________________ Message 21 ____________________________________ Time: 05:33:18 PM PST US Subject: Pietenpol-List: Re: A good day building From: "dgaldrich" When I remodeled our kitchen, the old oven went out to the garage and is now used for powder coating small parts. Even did my Corvair block in it. Works just dandy. Got the powder from Eastman as they have an excellent selection of colors. Sears cheepie powder gun. Voila. Now those long parts are a different story.... Will be interested in what Jack did as well. Dave Read this topic online here: http://forums.matronics.com/viewtopic.php?p=386778#386778 ________________________________ Message 22 ____________________________________ Time: 05:41:02 PM PST US Subject: Re: Pietenpol-List: First engine run today! NX898H From: Gene Rambo Me either. Someone would have to be pretty mean to steal my paint scheme! Gene Gene Rambo On Nov 4, 2012, at 8:26 PM, "Gary Boothe" wrote: > Nopenot that I recall. ;-) > > Gary Boothe > NX308MB > > From: owner-pietenpol-list-server@matronics.com [mailto:owner-pietenpol-li st-server@matronics.com] On Behalf Of Gene Rambo > Sent: Sunday, November 04, 2012 1:15 PM > To: pietenpol-list > Subject: RE: Pietenpol-List: First engine run today! NX898H > > why? Is there already a black and yellow one out there?? > > Gene > > From: gboothe5@comcast.net > To: pietenpol-list@matronics.com > Subject: RE: Pietenpol-List: First engine run today! NX898H > Date: Sun, 4 Nov 2012 13:08:01 -0800 > > I=99ll be damned! Black & yellowI had no idea! Sounds great , Gene!! > > Gary Boothe > NX308MB > > From: owner-pietenpol-list-server@matronics.com [mailto:owner-pietenpol-li st-server@matronics.com] On Behalf Of Gene Rambo > Sent: Sunday, November 04, 2012 12:50 PM > To: pietenpol-list > Subject: Pietenpol-List: First engine run today! NX898H > > OK, got grief for not posting photos, so here is a video shot today of fir st engine run. Brett Phillips came and helped out, and after chasing initia l water and fuel leaks, we got it running and put nearly an hour on it off a nd on. Ran it to full power briefly a couple of times, can't wait to get th e fish scale, I think it'll break it! LOL > > Finalize a few engine items, trim a few areas of the cowling, and all is r eady to paint and install. Wing is almost ready to shoot silver, then color . Planning on first flight as soon as the weather warms up in the spring. B rodhead FOR SURE this year, Jack and Matt, get ready . . . Douwe, we'll meet you on the way. Now we need to get Brett to get to work on his airpland an d have a REAL squadron headed west! > > Gene Rambo > > Here is the link to youtube: > > http://youtu.be/9MB3W6QpkLE > > > > www.aeroelectric.com > www.buildersbooks.com > www.homebuilthelp.com > http://www.matronics.com/contribution > http://www.matronics.com/Navigator?Pietenpol-List > http://forums.matronics.com > > > > _blank">www.aeroelectric.com > " target="_blank">www.buildersbooks.com > ="_blank">www.homebuilthelp.com > ="_blank">http://www.matronics.com/contribution > st" target="_blank">http://www.matronics.com/Navigator?Pietenpol-List > http://forums.matronics.com > > > > www.aeroelectric.com > www.buildersbooks.com > www.homebuilthelp.com > http://www.matronics.com/contribution > http://www.matronics.com/Navigator?Pietenpol-List > http://forums.matronics.com > > > ========================== ========= ========================== ========= ========================== ========= ========================== ========= > ________________________________ Message 23 ____________________________________ Time: 05:45:26 PM PST US Subject: Pietenpol-List: Re: First engine run today! NX898H From: "K5YAC" Good stuff Gene! All you guys finishing up are really keeping others motivated. Not that the many already flying examples aren't inspirational, but to see projects being finished up and making their first flights... wow! Hats off to all of you who continue to demonstrate that perseverance pays! -------- Mark Chouinard Wings, Center Section and Empannage and Fuse framed up - Working on Landing Gear Read this topic online here: http://forums.matronics.com/viewtopic.php?p=386782#386782 ________________________________ Message 24 ____________________________________ Time: 05:50:29 PM PST US Subject: Pietenpol-List: sunset flight From: Michael Groah Well, I managed to get a couple of flights in today. One this morning and a nice short sunset flight. It was a beautiful evening. Took off and climbed to 1000agl so I could cruise around over the town and then when out over th e farm fields. I did a nice hard slip to get me low, and enjoyed what Piete npol flying is all about. I returned to the airport and did two nice wheel landings to end the day. I'm now at 22.6 hours of flight time, and I'm exci ted to get the remainder of my forty hours in so I can share the experience w ith my wife, father and daughter. Mike Groah Tulare California 414MV Sent from my iPhone
________________________________ Message 25 ____________________________________ Time: 05:56:26 PM PST US Subject: Re: Pietenpol-List: First engine run today! NX898H From: Ryan Mueller Some kinda four-flusher, they would be. Congratulations Gene, looks and sounds beautiful On Sun, Nov 4, 2012 at 7:40 PM, Gene Rambo wrote: > Me either. Someone would have to be pretty mean to steal my paint scheme ! > > Gene > > Gene Rambo > > On Nov 4, 2012, at 8:26 PM, "Gary Boothe" wrote: > > Nope=85not that I recall. ;-)**** > > ** ** > > Gary Boothe**** > > NX308MB**** > > ** ** > > *From:* owner-pietenpol-list-server@matronics.com [mailto: > owner-pietenpol-list-server@matronics.com] *On Behalf Of *Gene Rambo > *Sent:* Sunday, November 04, 2012 1:15 PM > *To:* pietenpol-list > *Subject:* RE: Pietenpol-List: First engine run today! NX898H**** > > ** ** > > why? Is there already a black and yellow one out there?? > > Gene > **** > ------------------------------ > > From: gboothe5@comcast.net > To: pietenpol-list@matronics.com > Subject: RE: Pietenpol-List: First engine run today! NX898H > Date: Sun, 4 Nov 2012 13:08:01 -0800**** > > I=92ll be damned! Black & yellow=85I had no idea! Sounds great, Gene!!*** * > > **** > > Gary Boothe**** > > NX308MB**** > > **** > > *From:* owner-pietenpol-list-server@matronics.com [ > mailto:owner-pietenpol-list-server@matronics.com] > *On Behalf Of *Gene Rambo > *Sent:* Sunday, November 04, 2012 12:50 PM > *To:* pietenpol-list > *Subject:* Pietenpol-List: First engine run today! NX898H**** > > **** > > OK, got grief for not posting photos, so here is a video shot today of > first engine run. Brett Phillips came and helped out, and after chasing > initial water and fuel leaks, we got it running and put nearly an hour on > it off and on. Ran it to full power briefly a couple of times, can't wai t > to get the fish scale, I think it'll break it! LOL > > Finalize a few engine items, trim a few areas of the cowling, and all is > ready to paint and install. Wing is almost ready to shoot silver, then > color. Planning on first flight as soon as the weather warms up in the > spring. Brodhead FOR SURE this year, Jack and Matt, get ready . . . Douw e, > we'll meet you on the way. Now we need to get Brett to get to work on hi s > airpland and have a REAL squadron headed west! > > Gene Rambo > > Here is the link to youtube: > > http://youtu.be/9MB3W6QpkLE > **** > > * ***** > > * ***** > > *www.aeroelectric.com***** > > *www.buildersbooks.com***** > > *www.homebuilthelp.com***** > > *http://www.matronics.com/contribution***** > > *http://www.matronics.com/Navigator?Pietenpol-List***** > > *http://forums.matronics.com***** > > * ***** > > * * > > * * > > *_blank">www.aeroelectric.com* > > *" target="_blank">www.buildersbooks.com* > > *="_blank">www.homebuilthelp.com* > > *="_blank">http://www.matronics.com/contribution* > > *st" target="_blank">http://www.matronics.com/Navigator?Pietenpol-List* > > *http://forums.matronics.com* > > * * > > * * > > * * > > ** > > ** > > ** > > ** > > ** > > ** > > ** > > ** > > *www.aeroelectric.com* > > *www.buildersbooks.com* > > *www.homebuilthelp.com* > > ** > > *http://www.matronics.com/contribution* > > ** > > ** > > ** > > ** > > ** > > ** > > ** > > *http://www.matronics.com/Navigator?Pietenpol-List* > > ** > > ** > > *http://forums.matronics.com* > > ** > > * * > > * > > ======================== ===========ctric.com > >www.buildersbooks.comuilthelp.commatronics.com/contribution > ======================== > >http://www.matronics.com/Navigator?Pietenpol-List > ======================== ===========cs.com > ======================== > * > > * > =========== =========== =========== =========== > * > > ________________________________ Message 26 ____________________________________ Time: 06:08:03 PM PST US From: "Gary Boothe" Subject: RE: Pietenpol-List: sunset flight Way to go, Mike! I see you have a front cover...working on that right now... Gary Boothe NX308MB -----Original Message----- From: owner-pietenpol-list-server@matronics.com [mailto:owner-pietenpol-list-server@matronics.com] On Behalf Of Michael Groah Sent: Sunday, November 04, 2012 5:50 PM Subject: Pietenpol-List: sunset flight Well, I managed to get a couple of flights in today. One this morning and a nice short sunset flight. It was a beautiful evening. Took off and climbed to 1000agl so I could cruise around over the town and then when out over the farm fields. I did a nice hard slip to get me low, and enjoyed what Pietenpol flying is all about. I returned to the airport and did two nice wheel landings to end the day. I'm now at 22.6 hours of flight time, and I'm excited to get the remainder of my forty hours in so I can share the experience with my wife, father and daughter. Mike Groah Tulare California 414MV ________________________________ Message 27 ____________________________________ Time: 06:26:15 PM PST US Subject: Re: Pietenpol-List: sunset flight From: Michael Groah Gary, yes the front cover makes a big difference and keeps my legs warmer on these cool California evenings. I think it was only in the 70's today. I still need to finish mine by stitching around the perimeter but the main part is complete. I've started on one for the rear to keep the dust out.... and rain too if I fly it out of California. Mike Groah Sent from my iPhone On Nov 4, 2012, at 6:07 PM, "Gary Boothe" wrote: > > Way to go, Mike! I see you have a front cover...working on that right now... > > Gary Boothe > NX308MB > > > -----Original Message----- > From: owner-pietenpol-list-server@matronics.com > [mailto:owner-pietenpol-list-server@matronics.com] On Behalf Of Michael > Groah > Sent: Sunday, November 04, 2012 5:50 PM > To: pietenpol-list@matronics.com > Subject: Pietenpol-List: sunset flight > > > Well, I managed to get a couple of flights in today. One this morning and a > nice short sunset flight. It was a beautiful evening. Took off and climbed > to 1000agl so I could cruise around over the town and then when out over the > farm fields. I did a nice hard slip to get me low, and enjoyed what > Pietenpol flying is all about. I returned to the airport and did two nice > wheel landings to end the day. I'm now at 22.6 hours of flight time, and I'm > excited to get the remainder of my forty hours in so I can share the > experience with my wife, father and daughter. > > Mike Groah > Tulare California > 414MV > > > > > ------------------------------------------------------------------------------------- Other Matronics Email List Services ------------------------------------------------------------------------------------- Post A New Message pietenpol-list@matronics.com UN/SUBSCRIBE http://www.matronics.com/subscription List FAQ http://www.matronics.com/FAQ/Pietenpol-List.htm Web Forum Interface To Lists http://forums.matronics.com Matronics List Wiki http://wiki.matronics.com Full Archive Search Engine http://www.matronics.com/search 7-Day List Browse http://www.matronics.com/browse/pietenpol-list Browse Digests http://www.matronics.com/digest/pietenpol-list Browse Other Lists http://www.matronics.com/browse Live Online Chat! http://www.matronics.com/chat Archive Downloading http://www.matronics.com/archives Photo Share http://www.matronics.com/photoshare Other Email Lists http://www.matronics.com/emaillists Contributions http://www.matronics.com/contribution ------------------------------------------------------------------------------------- These Email List Services are sponsored solely by Matronics and through the generous Contributions of its members.