Pietenpol-List Digest Archive

Sat 03/09/13


Total Messages Posted: 25



Today's Message Index:
----------------------
 
     1. 04:28 AM - Re: Corvair cowl (caldwrl)
     2. 04:35 AM - corvair cowl (JOSEPH SWITHIN)
     3. 04:37 AM - Rick first run (JOSEPH SWITHIN)
     4. 07:48 AM - Re: Jim Boyer's 1st start-up (Jim Boyer)
     5. 07:49 AM - Re: Jim Boyer's 1st start-up (Jim Boyer)
     6. 07:52 AM - Re: Jim Boyer's 1st start-up (Jim Boyer)
     7. 07:55 AM - Re: Jim Boyer's 1st start-up (Jim Boyer)
     8. 08:09 AM - Re: Re: Corvair cowl (Gary Boothe)
     9. 08:11 AM - Re: Jim Boyer's 1st start-up (Bill Church)
    10. 12:00 PM - Re: Re: Jim Boyer's 1st start-up (Jim Boyer)
    11. 02:37 PM - Re: Re: Jim Boyer's 1st start-up (Robert Bush)
    12. 04:01 PM - Re: Jim Boyer's 1st start-up (Ray Krause)
    13. 04:01 PM - Re: Re: Jim Boyer's 1st start-up (V Groah)
    14. 04:04 PM - FIRST FLIGHT OF THE SEASON (Douwe Blumberg)
    15. 04:09 PM - Re: FIRST FLIGHT OF THE SEASON (helspersew@aol.com)
    16. 04:14 PM - Re: FIRST FLIGHT OF THE SEASON (Rick)
    17. 04:31 PM - Re: FIRST FLIGHT OF THE SEASON (Gary Boothe)
    18. 05:09 PM - First flight of the season (Douwe Blumberg)
    19. 05:10 PM - Re: Re: Sky Scout fuselage (Rick Schreiber)
    20. 05:48 PM - Re: Rick first run (Rick Schreiber)
    21. 05:49 PM - Re: Re: Jim Boyer's 1st start-up (Jim Boyer)
    22. 05:53 PM - Re: Jim Boyer's 1st start-up (Jim Boyer)
    23. 05:57 PM - Re: Re: Jim Boyer's 1st start-up (Jim Boyer)
    24. 06:03 PM - Re: FIRST FLIGHT OF THE SEASON (Jim Boyer)
    25. 08:37 PM - Re: Jim Boyer's 1st start-up (Ray Krause)
 
 
 


Message 1


  • INDEX
  • Back to Main INDEX
  • NEXT
  • Skip to NEXT Message
  • LIST
  • Reply to LIST Regarding this Message
  • SENDER
  • Reply to SENDER Regarding this Message
    Time: 04:28:06 AM PST US
    Subject: Re: Corvair cowl
    From: "caldwrl" <caldwrl@etex.net>
    Gardner, Yes, I have a front starter and alternator (dynamo) per the typical William Wynne setup. Very happy with it so far. Han's cowl design covers the starter quite nicely. Jack, The bolts I think you are referencing in center section are across the bottom of both spars to secure the fore an aft fuel tank supports. The supports are composed of a 1" sq. wood piece and a 3/4" alum. angle ( I notched the rear support in the center for the fuel take off point. the front support is continuous). I am attaching a pic of the aft support. -------- Robert Caldwell Read this topic online here: http://forums.matronics.com/viewtopic.php?p=395923#395923 Attachments: http://forums.matronics.com//files/dsc00039a_169.jpg


    Message 2


  • INDEX
  • Back to Main INDEX
  • PREVIOUS
  • Skip to PREVIOUS Message
  • NEXT
  • Skip to NEXT Message
  • LIST
  • Reply to LIST Regarding this Message
  • SENDER
  • Reply to SENDER Regarding this Message
    Time: 04:35:25 AM PST US
    From: JOSEPH SWITHIN <joeswithin@yahoo.com>
    Subject: corvair cowl
    Hans, I really liked the look of the cowl. Do you have a drawing with dimensions available? I looks cleaner than most I have seen. Thanks Joe Swithin Morris, IL Hunting & Gathering Mode


    Message 3


  • INDEX
  • Back to Main INDEX
  • PREVIOUS
  • Skip to PREVIOUS Message
  • NEXT
  • Skip to NEXT Message
  • LIST
  • Reply to LIST Regarding this Message
  • SENDER
  • Reply to SENDER Regarding this Message
    Time: 04:37:10 AM PST US
    From: JOSEPH SWITHIN <joeswithin@yahoo.com>
    Subject: Rick first run
    Rick, I' am not to far from you and would like to see your project and the first run if possible. Please let me know if this is acceptable. Joe Swithin Morris, IL Hunting & Gathering Mode


    Message 4


  • INDEX
  • Back to Main INDEX
  • PREVIOUS
  • Skip to PREVIOUS Message
  • NEXT
  • Skip to NEXT Message
  • LIST
  • Reply to LIST Regarding this Message
  • SENDER
  • Reply to SENDER Regarding this Message
    Time: 07:48:00 AM PST US
    From: Jim Boyer <boyerjrb@comcast.net>
    Subject: Re: Jim Boyer's 1st start-up
    HI Gary, Thanks again for coming over and helping get the engine ready for starting. I thought there was a wrench missing but couldn't figure out where. Thanks for putting the video on U tube; don't know how to do that. The computer said the video was too long to send the whole thing so you all got a short clip of the video. Cheers, Jim


    Message 5


  • INDEX
  • Back to Main INDEX
  • PREVIOUS
  • Skip to PREVIOUS Message
  • NEXT
  • Skip to NEXT Message
  • LIST
  • Reply to LIST Regarding this Message
  • SENDER
  • Reply to SENDER Regarding this Message
    Time: 07:49:30 AM PST US
    From: Jim Boyer <boyerjrb@comcast.net>
    Subject: Re: Jim Boyer's 1st start-up
    Thanks Rick, it is neat to finally have it running and fortunately 9/16 wrenches aren't that expensive. Cheers, Jim


    Message 6


  • INDEX
  • Back to Main INDEX
  • PREVIOUS
  • Skip to PREVIOUS Message
  • NEXT
  • Skip to NEXT Message
  • LIST
  • Reply to LIST Regarding this Message
  • SENDER
  • Reply to SENDER Regarding this Message
    Time: 07:52:12 AM PST US
    From: Jim Boyer <boyerjrb@comcast.net>
    Subject: Re: Jim Boyer's 1st start-up
    Hi Mike, It is nice to have it running even if I have minor problems to fix; rocker arm oil leak on right side. Now on to priming and painting and wings. Cheers, Jim


    Message 7


  • INDEX
  • Back to Main INDEX
  • PREVIOUS
  • Skip to PREVIOUS Message
  • NEXT
  • Skip to NEXT Message
  • LIST
  • Reply to LIST Regarding this Message
  • SENDER
  • Reply to SENDER Regarding this Message
    Time: 07:55:20 AM PST US
    From: Jim Boyer <boyerjrb@comcast.net>
    Subject: Re: Jim Boyer's 1st start-up
    Thanks Ray; no Arlene took a run down to pick up some stuff at the drug store and when she got back we were just shutting it down. Gary told me you broke your hip; sorry to hear that and hope you are up and around soon. I thought the guys were coming up to see you but Gary said no you had gotten hurt. Get well soon. Jim


    Message 8


  • INDEX
  • Back to Main INDEX
  • PREVIOUS
  • Skip to PREVIOUS Message
  • NEXT
  • Skip to NEXT Message
  • LIST
  • Reply to LIST Regarding this Message
  • SENDER
  • Reply to SENDER Regarding this Message
    Time: 08:09:41 AM PST US
    Subject: Re: Corvair cowl
    From: Gary Boothe <gboothe5@comcast.net>
    Robert, Your cowling looks great...personalized and aesthetic! Well done, buddy! Gary Sent from my iPhone On Mar 9, 2013, at 4:27 AM, "caldwrl" <caldwrl@etex.net> wrote: > > Gardner, > > Yes, I have a front starter and alternator (dynamo) per the typical William Wynne setup. Very happy with it so far. Han's cowl design covers the starter quite nicely. > > Jack, > > The bolts I think you are referencing in center section are across the bottom of both spars to secure the fore an aft fuel tank supports. The supports are composed of a 1" sq. wood piece and a 3/4" alum. angle ( I notched the rear support in the center for the fuel take off point. the front support is continuous). I am attaching a pic of the aft support. > > -------- > Robert Caldwell > > > > > Read this topic online here: > > http://forums.matronics.com/viewtopic.php?p=395923#395923 > > > > > Attachments: > > http://forums.matronics.com//files/dsc00039a_169.jpg > > > > > > >


    Message 9


  • INDEX
  • Back to Main INDEX
  • PREVIOUS
  • Skip to PREVIOUS Message
  • NEXT
  • Skip to NEXT Message
  • LIST
  • Reply to LIST Regarding this Message
  • SENDER
  • Reply to SENDER Regarding this Message
    Time: 08:11:40 AM PST US
    Subject: Re: Jim Boyer's 1st start-up
    From: "Bill Church" <billspiet@sympatico.ca>
    Congrats, Jim. What an exciting day for you. By the way, your paint job looks a little rough. :) Bill C. Read this topic online here: http://forums.matronics.com/viewtopic.php?p=395933#395933


    Message 10


  • INDEX
  • Back to Main INDEX
  • PREVIOUS
  • Skip to PREVIOUS Message
  • NEXT
  • Skip to NEXT Message
  • LIST
  • Reply to LIST Regarding this Message
  • SENDER
  • Reply to SENDER Regarding this Message
    Time: 12:00:03 PM PST US
    From: Jim Boyer <boyerjrb@comcast.net>
    Subject: Re: Jim Boyer's 1st start-up
    Hi Bill, Just got out of the garage this morning from painting it a medium gray color; not saying what the final paint job may be but who knows it might end up anothe black and something Piet! The paint job at first engine start was a little on the weird side, have to admit it. It really is a great feeling to see and hear it run...finally. Thanks, Jim B.


    Message 11


  • INDEX
  • Back to Main INDEX
  • PREVIOUS
  • Skip to PREVIOUS Message
  • NEXT
  • Skip to NEXT Message
  • LIST
  • Reply to LIST Regarding this Message
  • SENDER
  • Reply to SENDER Regarding this Message
    Time: 02:37:41 PM PST US
    Subject: Re: Jim Boyer's 1st start-up
    From: Robert Bush <rbush96589@aol.com>
    Congrats Jim, it's a good feeling to here that corvair run on your plane is n't it.wont be long now until you and your wife will be enjoying flights aro und the California country side. Randy Bush NX294RB Sent from my iPhone On Mar 9, 2013, at 1:59 PM, Jim Boyer <boyerjrb@comcast.net> wrote: > Hi Bill, > > Just got out of the garage this morning from painting it a medium gray col or; not saying what the final paint job may be but who knows it might end up anothe black and something Piet! > > The paint job at first engine start was a little on the weird side, have t o admit it. > > > > It really is a great feeling to see and hear it run...finally. > > Thanks, > > Jim B. > > > > > > ========================== ========= ========================== ========= ========================== ========= ========================== ========= >


    Message 12


  • INDEX
  • Back to Main INDEX
  • PREVIOUS
  • Skip to PREVIOUS Message
  • NEXT
  • Skip to NEXT Message
  • LIST
  • Reply to LIST Regarding this Message
  • SENDER
  • Reply to SENDER Regarding this Message
    Time: 04:01:41 PM PST US
    From: Ray Krause <raykrause@frontiernet.net>
    Subject: Re: Jim Boyer's 1st start-up
    Yes, Jim. Broke my hip exactly 6weeks ago, but have been flying for the pas t three weeks. Just short flights, but it is still lying! Your plane looks beautiful. Guess I had better quit building mine, all you g uys are putting me to shame! I will be going to the EAA Workshop for fabric covering in Watsonville on Ma rch 23-24. Hope what I learn will help me do as nice a Job as you have one. Maybe I will have to take lessons from you and Gary. Thanks, Ray Sent from my iPad On Mar 9, 2013, at 7:54 AM, Jim Boyer <boyerjrb@comcast.net> wrote: > Thanks Ray; no Arlene took a run down to pick up some stuff at the drug st ore and when she got back we were just shutting it down. > > > > Gary told me you broke your hip; sorry to hear that and hope you are up an d around soon. I thought the guys were coming up to see you but Gary said no you had gotten hurt. > > Get well soon. > > Jim > > > > > > ========================== ========= ========================== ========= ========================== ========= ========================== ========= >


    Message 13


  • INDEX
  • Back to Main INDEX
  • PREVIOUS
  • Skip to PREVIOUS Message
  • NEXT
  • Skip to NEXT Message
  • LIST
  • Reply to LIST Regarding this Message
  • SENDER
  • Reply to SENDER Regarding this Message
    Time: 04:01:41 PM PST US
    From: V Groah <vgroah@hotmail.com>
    Subject: Re: Jim Boyer's 1st start-up
    So happy to see the great progress Jim!!! Looks like you are going the lat ex finish route. Sure is easier and less expensive. They say it is easier to repair as well. Looks like you will be flying by west coast Piet time in June but may not have the 40 flown off to make the trip. Good for you! !! Vic NX414MV Subject: Re: Pietenpol-List: Re: Jim Boyer's 1st start-up From: rbush96589@aol.com Congrats Jim=2C it's a good feeling to here that corvair run on your plane isn't it.wont be long now until you and your wife will be enjoying flights around the California country side. Randy Bush NX294RB Sent from my iPhone On Mar 9=2C 2013=2C at 1:59 PM=2C Jim Boyer <boyerjrb@comcast.net> wrote: Hi Bill=2C Just got out of the garage this morning from painting it a medium gray colo r=3B not saying what the final paint job may be but who knows it might end up anothe black and something Piet! The paint job at first engine start was a little on the weird side=2C have to admit it. It really is a great feeling to see and hear it run...finally. Thanks=2C Jim B. 3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D= 3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D= 3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D= 3D 3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D= 3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D= 3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D= 3D 3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D= 3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D= 3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D= 3D 3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D= 3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D= 3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D= 3D


    Message 14


  • INDEX
  • Back to Main INDEX
  • PREVIOUS
  • Skip to PREVIOUS Message
  • NEXT
  • Skip to NEXT Message
  • LIST
  • Reply to LIST Regarding this Message
  • SENDER
  • Reply to SENDER Regarding this Message
    Time: 04:04:43 PM PST US
    Subject: FIRST FLIGHT OF THE SEASON
    From: Douwe Blumberg <douweblumberg@earthlink.net>
    BEAUTIFUL FLIGHT, CHT PERFECT!! <pre><b><font size=2 color="#000000" face="courier new,courier"> </b></font></pre></body></html>


    Message 15


  • INDEX
  • Back to Main INDEX
  • PREVIOUS
  • Skip to PREVIOUS Message
  • NEXT
  • Skip to NEXT Message
  • LIST
  • Reply to LIST Regarding this Message
  • SENDER
  • Reply to SENDER Regarding this Message
    Time: 04:09:39 PM PST US
    Subject: Re: FIRST FLIGHT OF THE SEASON
    From: helspersew@aol.com
    Douwe, That is an awesome photo! Just the start of a great flying season. Looking forward to seeing you at Brodhead. Should be a record year! Dan Helsper Puryear, TN. -----Original Message----- From: Douwe Blumberg <douweblumberg@earthlink.net> Sent: Sat, Mar 9, 2013 6:05 Subject: Pietenpol-List: FIRST FLIGHT OF THE SEASON BEAUTIFUL FLIGHT, CHT PERFECT!! <pre><b><font size=2 color="#000000" face="courier new,courier"> ttp://www.matronics.com/Navigator?Pietenpol-List</a> .com</a> tronics.com/contribution</a> </b></font></pre>


    Message 16


  • INDEX
  • Back to Main INDEX
  • PREVIOUS
  • Skip to PREVIOUS Message
  • NEXT
  • Skip to NEXT Message
  • LIST
  • Reply to LIST Regarding this Message
  • SENDER
  • Reply to SENDER Regarding this Message
    Time: 04:14:15 PM PST US
    Subject: Re: FIRST FLIGHT OF THE SEASON
    From: Rick <lmforge@earthlink.net>
    Douse, Very nice picture. I especially like how the side pipes show up. Rick Schreiber Valparaiso. IN Sent from my iPad On Mar 9, 2013, at 6:04 PM, Douwe Blumberg <douweblumberg@earthlink.net> wrote: > > > <IMG_6981.jpg> > > > > BEAUTIFUL FLIGHT, CHT PERFECT!! > <pre><b><font size=2 color="#000000" face="courier new,courier"> > > > </b></font></pre>


    Message 17


  • INDEX
  • Back to Main INDEX
  • PREVIOUS
  • Skip to PREVIOUS Message
  • NEXT
  • Skip to NEXT Message
  • LIST
  • Reply to LIST Regarding this Message
  • SENDER
  • Reply to SENDER Regarding this Message
    Time: 04:31:22 PM PST US
    From: "Gary Boothe" <gboothe5@comcast.net>
    Subject: FIRST FLIGHT OF THE SEASON
    Beautiful, Douwe!!! Gary Boothe NX308MB -----Original Message----- From: owner-pietenpol-list-server@matronics.com [mailto:owner-pietenpol-list-server@matronics.com] On Behalf Of Douwe Blumberg Sent: Saturday, March 09, 2013 4:04 PM Subject: Pietenpol-List: FIRST FLIGHT OF THE SEASON


    Message 18


  • INDEX
  • Back to Main INDEX
  • PREVIOUS
  • Skip to PREVIOUS Message
  • NEXT
  • Skip to NEXT Message
  • LIST
  • Reply to LIST Regarding this Message
  • SENDER
  • Reply to SENDER Regarding this Message
    Time: 05:09:49 PM PST US
    From: Douwe Blumberg <douweblumberg@earthlink.net>
    Subject: First flight of the season
    Sent this before from my iphone but thought I'd send again from my computer and add some details. Got her buttoned up after all the eyebrows/baffling installation and snuck in a flight this evening. Wanted to ck temps and security of the eyebrow installation, so I took off and climbed with full power to 3,000, watching the cht, which stayed nicely in the green. Without the eyebrows I couldn't climb full power without it threatening to go out of the green, so that solves that! Was a beautiful, smooth evening. Flew for 20 minutes, sidelipped down to pattern altitude and made a decent landing considering I haven't flown for three months. Can't wait to get back into the saddle. One weird thing. When I drained my tank sump for water, the gas was unusually dark blue for a bit. Does the dye settle in the fuel?? got normal after a few drains. Douwe


    Message 19


  • INDEX
  • Back to Main INDEX
  • PREVIOUS
  • Skip to PREVIOUS Message
  • NEXT
  • Skip to NEXT Message
  • LIST
  • Reply to LIST Regarding this Message
  • SENDER
  • Reply to SENDER Regarding this Message
    Time: 05:10:56 PM PST US
    From: Rick Schreiber <lmforge@earthlink.net>
    Subject: Re: Sky Scout fuselage
    On 3/8/2013 8:28 AM, Bill Church wrote: > > Rick, > I've only seen the FGM version of the Sky Scout plans, so this is only speculation, but I doubt that the other version is drawn to suit the lighter Continental engines. I bet the plans he got from the Pietenpol family were drawn before the Continental engines were even built. My guess is that the differences are akin to the difference between the FGM version and the Orrin Hoopman version of the Air Camper plans. The Hoopman plans are identified as the "improved" Air Camper, which gives a little bit more room for pilot and passenger. I would suggest checking the dates on both sets of plans, and go with the later version (most likely the plans from the Pietenpol family). > Bill C. > > Thanks Bill, sounds like a good plan. Rick Schreiber


    Message 20


  • INDEX
  • Back to Main INDEX
  • PREVIOUS
  • Skip to PREVIOUS Message
  • NEXT
  • Skip to NEXT Message
  • LIST
  • Reply to LIST Regarding this Message
  • SENDER
  • Reply to SENDER Regarding this Message
    Time: 05:48:08 PM PST US
    From: Rick Schreiber <lmforge@earthlink.net>
    Subject: Re: Rick first run
    On 3/9/2013 6:37 AM, JOSEPH SWITHIN wrote: > Rick, > I' am not to far from you and would like to see your project and the > first run if possible. Please let me know if this is acceptable. > > Joe Swithin > Morris, IL > Hunting & Gathering Mode Joe you can stop by anytime. Just contact me offline and I will give you my contact info. Rick Schreiber


    Message 21


  • INDEX
  • Back to Main INDEX
  • PREVIOUS
  • Skip to PREVIOUS Message
  • NEXT
  • Skip to NEXT Message
  • LIST
  • Reply to LIST Regarding this Message
  • SENDER
  • Reply to SENDER Regarding this Message
    Time: 05:49:44 PM PST US
    From: Jim Boyer <boyerjrb@comcast.net>
    Subject: Re: Jim Boyer's 1st start-up
    Hi Randy, It really is nice to have it running. Its a great motivational kick to finish the wings and get with it. Thanks, Jim


    Message 22


  • INDEX
  • Back to Main INDEX
  • PREVIOUS
  • Skip to PREVIOUS Message
  • NEXT
  • Skip to NEXT Message
  • LIST
  • Reply to LIST Regarding this Message
  • SENDER
  • Reply to SENDER Regarding this Message
    Time: 05:53:29 PM PST US
    From: Jim Boyer <boyerjrb@comcast.net>
    Subject: Re: Jim Boyer's 1st start-up
    HI Ray, Don't =C2-stop, keep it going. My PIet is standoff scale like we use to m ake in RC model airplanes. When I get it done and go to our west coast gath ering I will park at the far end of Gary's and Mike's Piets. I have a feeling your Sky Scout will look just like your Wiex (howevery you spell it); i.e. beautiful! Cheers, Jim


    Message 23


  • INDEX
  • Back to Main INDEX
  • PREVIOUS
  • Skip to PREVIOUS Message
  • NEXT
  • Skip to NEXT Message
  • LIST
  • Reply to LIST Regarding this Message
  • SENDER
  • Reply to SENDER Regarding this Message
    Time: 05:57:03 PM PST US
    From: Jim Boyer <boyerjrb@comcast.net>
    Subject: Re: Jim Boyer's 1st start-up
    HI Vic, I do hope to have it flying by then but probably would have to taxi to Frazier Lake due to the 40 hours. I think that would be a scary trip with the traffic on 101. I just spent this morning painting the fuselage a medium gray primer. Not saying what paint or colors yet. Originally wanted to paint it green but so many of the newest PIets are green or shades of green I may change my mind and its colors! Thanks for the nice comments. Jim


    Message 24


  • INDEX
  • Back to Main INDEX
  • PREVIOUS
  • Skip to PREVIOUS Message
  • NEXT
  • Skip to NEXT Message
  • LIST
  • Reply to LIST Regarding this Message
  • SENDER
  • Reply to SENDER Regarding this Message
    Time: 06:03:08 PM PST US
    From: Jim Boyer <boyerjrb@comcast.net>
    Subject: Re: FIRST FLIGHT OF THE SEASON
    HI Douwe, Love that silhouette especially with the two long pipes. Reminds me of the English SE-5; one of my WW1 favorites. Jim B.


    Message 25


  • INDEX
  • Back to Main INDEX
  • PREVIOUS
  • Skip to PREVIOUS Message
  • NEXT
  • Skip to NEXT Message
  • LIST
  • Reply to LIST Regarding this Message
  • SENDER
  • Reply to SENDER Regarding this Message
    Time: 08:37:11 PM PST US
    From: Ray Krause <raykrause@frontiernet.net>
    Subject: Re: Jim Boyer's 1st start-up
    You will probably be to Fraiser Lake this year, at least one more for me, ma ybe two. Think I will paint my entire plane with flat black latex paint so i t cannot be seen very well! See you at the FLYIN, if not before! Ray PS. Thanks for the kind words. Sent from my iPad On Mar 9, 2013, at 5:53 PM, Jim Boyer <boyerjrb@comcast.net> wrote: > HI Ray, > > Don't stop, keep it going. My PIet is standoff scale like we use to make i n RC model airplanes. When I get it done and go to our west coast gathering I will park at the far end of Gary's and Mike's Piets. > > I have a feeling your Sky Scout will look just like your Wiex (howevery yo u spell it); i.e. beautiful! > > Cheers, > > Jim > > > > > > 3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3 D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D =3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D 3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3 D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D =3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D 3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3 D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D =3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D 3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3 D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D =3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D >




    Other Matronics Email List Services

  • Post A New Message
  •   pietenpol-list@matronics.com
  • UN/SUBSCRIBE
  •   http://www.matronics.com/subscription
  • List FAQ
  •   http://www.matronics.com/FAQ/Pietenpol-List.htm
  • Web Forum Interface To Lists
  •   http://forums.matronics.com
  • Matronics List Wiki
  •   http://wiki.matronics.com
  • 7-Day List Browse
  •   http://www.matronics.com/browse/pietenpol-list
  • Browse Pietenpol-List Digests
  •   http://www.matronics.com/digest/pietenpol-list
  • Browse Other Lists
  •   http://www.matronics.com/browse
  • Live Online Chat!
  •   http://www.matronics.com/chat
  • Archive Downloading
  •   http://www.matronics.com/archives
  • Photo Share
  •   http://www.matronics.com/photoshare
  • Other Email Lists
  •   http://www.matronics.com/emaillists
  • Contributions
  •   http://www.matronics.com/contribution

    These Email List Services are sponsored solely by Matronics and through the generous Contributions of its members.

    -- Please support this service by making your Contribution today! --