---------------------------------------------------------- Pietenpol-List Digest Archive --- Total Messages Posted Wed 06/19/13: 12 ---------------------------------------------------------- Today's Message Index: ---------------------- 1. 06:18 AM - Contacts Wanted (Allan Macklem) 2. 06:31 AM - Re: ELT requirement (Ben Charvet) 3. 06:38 AM - Re: Contacts Wanted (John Hofmann) 4. 06:42 AM - Re: engine out.. (bender) 5. 07:25 AM - My favorite Brodhead pic (woodflier) 6. 07:49 AM - Brodhead pictures (TOM STINEMETZE) 7. 10:53 AM - A65- 8 core in classifieds (brian.e.jardine@l-3com.com) 8. 01:10 PM - Re: Sunset - send in your favorite photo (Jerry Dotson) 9. 02:07 PM - Re: Re: engine out.. (shad bell) 10. 07:17 PM - Re: Sunset - send in your favorite photo (Bill Church) 11. 08:37 PM - West Coast Piet Fly-In 2014 (taildrags) 12. 10:05 PM - Re: West Coast Piet Fly-In 2014 (Mark Roberts) ________________________________ Message 1 _____________________________________ Time: 06:18:56 AM PST US From: "Allan Macklem" Subject: Pietenpol-List: Contacts Wanted I would like to contact both Lowell Frank and Roman Bukolt (or anyone else who is actually flying a Piet with a Riblett 612 airfoil. I am interested in possibly widening the center section to 3 feet and shortening the wings 12 feet 6 inches (as suggested by Bill Rewey). Can someone please help me with their email addresses. Allan Macklem Low N Slow in Elkhorn, NE AWMacklem@cox.net 402.880.6559 ________________________________ Message 2 _____________________________________ Time: 06:31:35 AM PST US From: Ben Charvet Subject: Re: Pietenpol-List: ELT requirement The outdated 121.5 mhz Elts are still enough to make you legal, and are available used for pretty cheap. I had the one I use given to me by someone that had updated to the newer version. The 121.5 units don't really do much good. The guy in the hangar next door set his off accidently while doing some maintenance, and it went off for 5 days in his hangar before he was able to shut it off, and nobody except us hangar bums even checked on it. I use a Spot GPS device for safety. http://www.ebay.com/itm/Narco-ELT-10-System-w-Tray-and-Antenna-/370834214299?pt=Motors_Aviation_Parts_Gear&hash=item5657710d9b&vxp=mtr As Douwe said, you can spend your phase 1 time shopping and planning the installation. Ben Charvet (coming to Brodhead by car) On 6/18/2013 11:00 PM, Douwe Blumberg wrote: > > Hey Larry, > > You absolutely are NOT required to have an ELT installed during phase 1 flight testing, if you do not carry a passenger (which you aren't really supposed to anyways). You ARE required after phase 1 is complete. It is explained very clearly in the FAR AIM. > > Douwe > > -- Ben Charvet, PharmD Staff Pharmacist Parrish Medical center ________________________________ Message 3 _____________________________________ Time: 06:38:20 AM PST US From: John Hofmann Subject: Re: Pietenpol-List: Contacts Wanted Lowell monitors this list. If he does not pipe up, I can send his contact info. Roman passed away about a year ago. -john- John Hofmann Vice-President, Information Technology The Rees Group, Inc. 2424 American Lane Madison, WI 53704 Phone: 608.443.2468 ext 150 Fax: 608.443.2474 Email: jhofmann@reesgroupinc.com On Jun 19, 2013, at 8:18 AM, "Allan Macklem" wrote: > I would like to contact both Lowell Frank and Roman Bukolt (or anyone else who is actually flying a Piet with a Riblett 612 airfoil. I am interested in possibly widening the center section to 3 feet and shortening the wings 12 feet 6 inches (as suggested by Bill Rewey). > > Can someone please help me with their email addresses. > > Allan Macklem > Low N Slow in Elkhorn, NE > AWMacklem@cox.net > 402.880.6559 > > > > ________________________________ Message 4 _____________________________________ Time: 06:42:38 AM PST US Subject: Pietenpol-List: Re: engine out.. From: "bender" Yeah... thanks Shad.. I measured back from the fitting, following 43-13 and started the splice based on the rules. I got the replacement spar cut too.. holes marked and waiting on new T88 to show up. jeff Read this topic online here: http://forums.matronics.com/viewtopic.php?p=402989#402989 ________________________________ Message 5 _____________________________________ Time: 07:25:35 AM PST US Subject: Pietenpol-List: My favorite Brodhead pic From: woodflier I don't know who took this but it's from the 2011 flyin. Just because my ai rplane is in it has nothing to do with it..... Matt Paxton ________________________________ Message 6 _____________________________________ Time: 07:49:03 AM PST US From: "TOM STINEMETZE" Subject: Pietenpol-List: Brodhead pictures Here are a couple of my screensaver photos which I took at Brodhead. However, unfortunately, I have never been there during the Piet gathering. THAT IS ABOUT TO CHANGE!!! I have already booked a flight, etc. for the pilgrimage to this year's gathering. I am even ready to endure the fish boil if that is a requirement of the initiation. Tom Stinemetze McPherson, KS N328X ________________________________ Message 7 _____________________________________ Time: 10:53:56 AM PST US From: brian.e.jardine@l-3com.com Subject: Pietenpol-List: A65- 8 core in classifieds List was listed in our local classifieds, just passing it along. I have no affiliation with ad or seller. http://www.ksl.com/index.php?nid=218&ad=25649147&cat=151&lpid=&search=&ad_cid=11 Brian SLC-UT Do not archive ________________________________ Message 8 _____________________________________ Time: 01:10:47 PM PST US Subject: Pietenpol-List: Re: Sunset - send in your favorite photo From: "Jerry Dotson" Here is my favorite Sunset -------- Jerry Dotson First flight June 16,2012 Flying in phase 2 Lycoming O-235 C2C Jay Anderson CloudCars prop 76 X 44 do not archive Read this topic online here: http://forums.matronics.com/viewtopic.php?p=403009#403009 Attachments: http://forums.matronics.com//files/a9_231.jpg ________________________________ Message 9 _____________________________________ Time: 02:07:26 PM PST US From: shad bell Subject: Re: Pietenpol-List: Re: engine out.. I have only done a spar splice 1 time in A&P school, lots of work to get it right.- Look forward to seeing you flying again soon.=0A-=0AShad=0A =0A=0A________________________________=0A From: bender =0ATo: pietenpol-list@matronics.com =0ASent: Wednesday, June 19, 2 013 9:42 AM=0ASubject: Pietenpol-List: Re: engine out..=0A =0A=0A--> Piete npol-List message posted by: "bender" =0A=0AYe ah... thanks Shad..=0AI measured back from the fitting, following 43-13 and started the splice based on the rules.=0A=0AI got the replacement spar cut too.. holes marked and waiting on new T88 to show up.=0A=0Ajeff=0A=0A=0A =0A=0ARead this topic online here:=0A=0Ahttp://forums.matronics.com/viewtop - - - - - - - - - - - - - - - -Matt Dralle, L ======= ________________________________ Message 10 ____________________________________ Time: 07:17:38 PM PST US Subject: Pietenpol-List: Re: Sunset - send in your favorite photo From: "Bill Church" Okay, here's a batch of Brodhead sunset Piet photos. BC Read this topic online here: http://forums.matronics.com/viewtopic.php?p=403021#403021 Attachments: http://forums.matronics.com//files/brodhead2008_188_493.jpg http://forums.matronics.com//files/20090726_260_174.jpg http://forums.matronics.com//files/20090726_211_181.jpg http://forums.matronics.com//files/20090726_158_140.jpg ________________________________ Message 11 ____________________________________ Time: 08:37:07 PM PST US Subject: Pietenpol-List: West Coast Piet Fly-In 2014 From: "taildrags" Well, just a week ago I passed within about 40 miles of Frazier Lake airport headed south, and on Sunday I passed by it again, headed back north. I drove down to San Luis Obispo from my home in Oregon and back, via Interstate 5. (And yes, Mark Roberts, I completed my master's degree work!) It took me 10 hours to drive to San Luis Obispo from Medford, so I figure it will take me 7 or 8 hours to fly it in Scout. Probably 4 legs, 3 fuel stops. Leave out of Medford at sunup (6 or 7 AM), arrive to the critical eye of the landing judges at 3 in the afternoon. From what I saw, there are some mighty windy spots along the way though. That whole forest of wind turbines around Tracy was a tipoff that it might be slow and bumpy going on that leg, and the clouds of garlic skins flying out of the farm trailers on the highway was another indication that it gets windy as the day warms up. Set the date... I'll put it on the 2014 calendar, and we'll see how the chips fall for me and Scout. -------- Oscar Zuniga Medford, OR Air Camper NX41CC "Scout" A75 power Read this topic online here: http://forums.matronics.com/viewtopic.php?p=403022#403022 ________________________________ Message 12 ____________________________________ Time: 10:05:25 PM PST US Subject: Pietenpol-List: Re: West Coast Piet Fly-In 2014 From: "Mark Roberts" Congratulations on your degree Oscar! Well deserved I'm sure. With the turmoil in life right now, I doubt I woulda been able to drive over to meet you, but hopefully at next years West Coast Piet gathering. However, I just applied for a job in madison WI (45 minute drive from Brodhead I have discovered) so I may not be at the event next year... But, with my luch lately, I WILL be which is a good thing too... I need the diet! Read this topic online here: http://forums.matronics.com/viewtopic.php?p=403027#403027 ------------------------------------------------------------------------------------- Other Matronics Email List Services ------------------------------------------------------------------------------------- Post A New Message pietenpol-list@matronics.com UN/SUBSCRIBE http://www.matronics.com/subscription List FAQ http://www.matronics.com/FAQ/Pietenpol-List.htm Web Forum Interface To Lists http://forums.matronics.com Matronics List Wiki http://wiki.matronics.com Full Archive Search Engine http://www.matronics.com/search 7-Day List Browse http://www.matronics.com/browse/pietenpol-list Browse Digests http://www.matronics.com/digest/pietenpol-list Browse Other Lists http://www.matronics.com/browse Live Online Chat! http://www.matronics.com/chat Archive Downloading http://www.matronics.com/archives Photo Share http://www.matronics.com/photoshare Other Email Lists http://www.matronics.com/emaillists Contributions http://www.matronics.com/contribution ------------------------------------------------------------------------------------- These Email List Services are sponsored solely by Matronics and through the generous Contributions of its members.