Today's Message Index:
----------------------
1. 04:40 AM - Re: A engine out (bender)
2. 05:30 AM - Re: Continental Conn Rod Bolts (tkreiner)
3. 05:39 AM - Re: Alliance Ohio Fly-in (skipgadd@earthlink.net)
4. 06:55 AM - Re: Alliance Ohio Fly-in (shad bell)
5. 08:38 AM - Re: Alliance Ohio Fly-in (airlion2@gmail.com)
6. 08:53 AM - Re: Alliance Ohio Fly-in (John Hofmann)
7. 09:06 AM - Re: Alliance Ohio Fly-in (TOM STINEMETZE)
8. 09:40 AM - Re: Alliance Ohio Fly-in (helspersew@aol.com)
9. 01:13 PM - Logo Design. (Chris Rusch)
10. 01:37 PM - Re: Logo Design. (Gary Boothe)
11. 01:42 PM - Re: Logo Design. (echobravo4)
12. 01:46 PM - Re: Logo Design. (AircamperN11MS)
13. 03:32 PM - Re: Logo Design. (Jack)
14. 03:51 PM - Re: Logo Design. (Barry Davis)
15. 04:01 PM - Re: Logo Design. (Dortch, Steven D MAJ MIL USA NGB)
16. 04:22 PM - Re: Logo Design. (Jim Boyer)
17. 04:39 PM - Re: Logo Design. (Jack Phillips)
18. 04:50 PM - Re: Logo Design. (jarheadpilot82)
19. 04:55 PM - 4 blade prop (Dortch, Steven D MAJ MIL USA NGB)
20. 07:01 PM - Re: Logo Design. (Chris Rusch)
21. 07:07 PM - Re: Logo Design. (Chris Rusch)
22. 07:15 PM - My windscreen design... (Chris Rusch)
23. 07:53 PM - Re: My windscreen design... (Dortch, Steven D MAJ MIL USA NGB)
24. 07:59 PM - Re: Re: Logo Design. (Dortch, Steven D MAJ MIL USA NGB)
Message 1
INDEX | Back to Main INDEX |
NEXT | Skip to NEXT Message |
LIST | Reply to LIST Regarding this Message |
SENDER | Reply to SENDER Regarding this Message |
|
Subject: | Re: A engine out |
That "four square" idea is exactly what I have. .. the damage is in four places
equally spaced. .. the skirt on each corner has scuff marks. .
I'll be looking at everything close
Thanks guys
Jeff
Read this topic online here:
http://forums.matronics.com/viewtopic.php?p=404459#404459
Message 2
INDEX | Back to Main INDEX |
PREVIOUS | Skip to PREVIOUS Message |
NEXT | Skip to NEXT Message |
LIST | Reply to LIST Regarding this Message |
SENDER | Reply to SENDER Regarding this Message |
|
Subject: | Re: Continental Conn Rod Bolts |
Picture of the Conn Rod Bolts...
--------
Tom Kreiner
Read this topic online here:
http://forums.matronics.com/viewtopic.php?p=404461#404461
Attachments:
http://forums.matronics.com//files/conn_rod_bolts_145.jpg
Message 3
INDEX | Back to Main INDEX |
PREVIOUS | Skip to PREVIOUS Message |
NEXT | Skip to NEXT Message |
LIST | Reply to LIST Regarding this Message |
SENDER | Reply to SENDER Regarding this Message |
|
Subject: | Alliance Ohio Fly-in |
Ed Delancey and I are planning to drive up Friday. That is if the power
here comes back on and I can leave Cinda home alone.
Skip
> [Original Message]
> From: Pietflyer1977 <rob@stoinoff.com>
> To: <pietenpol-list@matronics.com>
> Date: 7/10/2013 9:02:11 PM
> Subject: Pietenpol-List: Alliance Ohio Fly-in
>
>
> Is anyone in the Midwest going to the Barber Airport fly-in this weekend
in Alliance, OH ? Anyone ever go? A good fly-in with a good turn out? Thanks
>
>
> Read this topic online here:
>
> http://forums.matronics.com/viewtopic.php?p=404431#404431
>
>
Message 4
INDEX | Back to Main INDEX |
PREVIOUS | Skip to PREVIOUS Message |
NEXT | Skip to NEXT Message |
LIST | Reply to LIST Regarding this Message |
SENDER | Reply to SENDER Regarding this Message |
|
Subject: | Alliance Ohio Fly-in |
I am planning on flying the piet up on saturday morning if the runway dries out.
we have had 3- 4 inches of rain in the past week. Does anyone know if Barber
field is a giant wet sponge at this point?
Shad
NX92GB
--------------------------------------------
On Thu, 7/11/13, skipgadd@earthlink.net <skipgadd@earthlink.net> wrote:
Subject: RE: Pietenpol-List: Alliance Ohio Fly-in
To: pietenpol-list@matronics.com
Date: Thursday, July 11, 2013, 8:39 AM
--> Pietenpol-List message posted
by: "skipgadd@earthlink.net"
<skipgadd@earthlink.net>
Ed Delancey and I are planning to drive up Friday. That is
if the power
here comes back on and I can leave Cinda home alone.
Skip
> [Original Message]
> From: Pietflyer1977 <rob@stoinoff.com>
> To: <pietenpol-list@matronics.com>
> Date: 7/10/2013 9:02:11 PM
> Subject: Pietenpol-List: Alliance Ohio Fly-in
>
"Pietflyer1977" <rob@stoinoff.com>
>
> Is anyone in the Midwest going to the Barber Airport
fly-in this weekend
in Alliance, OH ? Anyone ever go? A good fly-in with a good
turn out? Thanks
>
>
>
>
> Read this topic online here:
>
> http://forums.matronics.com/viewtopic.php?p=404431#404431
>
>
>
>
>
>
>
>
>
>
Email Forum -
- MATRONICS WEB FORUMS -
List Contribution Web Site -
-Matt
Dralle, List Admin.
Message 5
INDEX | Back to Main INDEX |
PREVIOUS | Skip to PREVIOUS Message |
NEXT | Skip to NEXT Message |
LIST | Reply to LIST Regarding this Message |
SENDER | Reply to SENDER Regarding this Message |
|
Subject: | Re: Alliance Ohio Fly-in |
Does anyone know about the field conditions at Brodhead? Have they had as much
rain as everyone else? I will need a sub to get out of the Atlanta area . Cheers,
Gardiner
Sent from my iPad
On Jul 11, 2013, at 9:55 AM, shad bell <aviatorbell@yahoo.com> wrote:
>
> I am planning on flying the piet up on saturday morning if the runway dries out.
we have had 3- 4 inches of rain in the past week. Does anyone know if Barber
field is a giant wet sponge at this point?
>
> Shad
> NX92GB
> --------------------------------------------
> On Thu, 7/11/13, skipgadd@earthlink.net <skipgadd@earthlink.net> wrote:
>
> Subject: RE: Pietenpol-List: Alliance Ohio Fly-in
> To: pietenpol-list@matronics.com
> Date: Thursday, July 11, 2013, 8:39 AM
>
> --> Pietenpol-List message posted
> by: "skipgadd@earthlink.net"
> <skipgadd@earthlink.net>
>
> Ed Delancey and I are planning to drive up Friday. That is
> if the power
> here comes back on and I can leave Cinda home alone.
> Skip
>
>
>> [Original Message]
>> From: Pietflyer1977 <rob@stoinoff.com>
>> To: <pietenpol-list@matronics.com>
>> Date: 7/10/2013 9:02:11 PM
>> Subject: Pietenpol-List: Alliance Ohio Fly-in
>>
> "Pietflyer1977" <rob@stoinoff.com>
>>
>> Is anyone in the Midwest going to the Barber Airport
> fly-in this weekend
> in Alliance, OH ? Anyone ever go? A good fly-in with a good
> turn out? Thanks
>>
>>
>>
>>
>> Read this topic online here:
>>
>> http://forums.matronics.com/viewtopic.php?p=404431#404431
>
>
>
> Email Forum -
> - MATRONICS WEB FORUMS -
> List Contribution Web Site -
> -Matt
> Dralle, List Admin.
>
>
>
>
>
>
>
>
>
Message 6
INDEX | Back to Main INDEX |
PREVIOUS | Skip to PREVIOUS Message |
NEXT | Skip to NEXT Message |
LIST | Reply to LIST Regarding this Message |
SENDER | Reply to SENDER Regarding this Message |
|
Subject: | Re: Alliance Ohio Fly-in |
I am based 60 north of Brodhead. We were in bad shape up until the past
weekend. All seems good now and it should be dry here for the next week
(according to the forecast). Sunday was the first day I was able to take
theRocket out since May, it has been so wet.
The real problem this year will be the mosquitos. The rain has made a
real good crop this year.
John Hofmann
Vice-President, Information Technology
The Rees Group, Inc.
2424 American Lane
Madison, WI 53704
Phone: 608.443.2468 ext 150
Fax: 608.443.2474
Email: jhofmann@reesgroupinc.com
On Jul 11, 2013, at 10:38 AM, airlion2@gmail.com wrote:
>
> Does anyone know about the field conditions at Brodhead? Have they had
as much rain as everyone else? I will need a sub to get out of the
Atlanta area . Cheers, Gardiner
>
> Sent from my iPad
>
> On Jul 11, 2013, at 9:55 AM, shad bell <aviatorbell@yahoo.com> wrote:
>
<aviatorbell@yahoo.com>
>>
>> I am planning on flying the piet up on saturday morning if the runway
dries out. we have had 3- 4 inches of rain in the past week. Does
anyone know if Barber field is a giant wet sponge at this point?
>>
>> Shad
>> NX92GB
>> --------------------------------------------
>> On Thu, 7/11/13, skipgadd@earthlink.net <skipgadd@earthlink.net>
wrote:
>>
>> Subject: RE: Pietenpol-List: Alliance Ohio Fly-in
>> To: pietenpol-list@matronics.com
>> Date: Thursday, July 11, 2013, 8:39 AM
>>
>> --> Pietenpol-List message posted
>> by: "skipgadd@earthlink.net"
>> <skipgadd@earthlink.net>
>>
>> Ed Delancey and I are planning to drive up Friday. That is
>> if the power
>> here comes back on and I can leave Cinda home alone.
>> Skip
>>
>>
>>> [Original Message]
>>> From: Pietflyer1977 <rob@stoinoff.com>
>>> To: <pietenpol-list@matronics.com>
>>> Date: 7/10/2013 9:02:11 PM
>>> Subject: Pietenpol-List: Alliance Ohio Fly-in
>>>
>> "Pietflyer1977" <rob@stoinoff.com>
>>>
>>> Is anyone in the Midwest going to the Barber Airport
>> fly-in this weekend
>> in Alliance, OH ? Anyone ever go? A good fly-in with a good
>> turn out? Thanks
>>>
>>>
>>>
>>>
>>> Read this topic online here:
>>>
>>> http://forums.matronics.com/viewtopic.php?p=404431#404431
>>
>>
>>
>> Email Forum -
>> - MATRONICS WEB FORUMS -
>> List Contribution Web Site -
>> -Matt
>> Dralle, List Admin.
>>
>>
>>
>>
>>
>>
>>
>>
>>
>
>
>
>
>
Message 7
INDEX | Back to Main INDEX |
PREVIOUS | Skip to PREVIOUS Message |
NEXT | Skip to NEXT Message |
LIST | Reply to LIST Regarding this Message |
SENDER | Reply to SENDER Regarding this Message |
|
Subject: | Re: Alliance Ohio Fly-in |
Has anybody given thought to harnessing those pests for extra motive power? I
know it can be done with the common house fly but the return on investment is
hard to track.
Stinemetze
Looking forward to Brodhead!
do not archive
>>> John Hofmann <jhofmann@reesgroupinc.com> 7/11/2013 10:53 AM >>>
I am based 60 north of Brodhead. We were in bad shape up until the past weekend.
All seems good now and it should be dry here for the next week (according to
the forecast). Sunday was the first day I was able to take theRocket out since
May, it has been so wet.
The real problem this year will be the mosquitos. The rain has made a real good
crop this year.
John Hofmann
Vice-President, Information Technology
The Rees Group, Inc.
2424 American Lane
Madison, WI 53704
Phone: 608.443.2468 ext 150
Fax: 608.443.2474
Email: jhofmann@reesgroupinc.com
Message 8
INDEX | Back to Main INDEX |
PREVIOUS | Skip to PREVIOUS Message |
NEXT | Skip to NEXT Message |
LIST | Reply to LIST Regarding this Message |
SENDER | Reply to SENDER Regarding this Message |
|
Subject: | Re: Alliance Ohio Fly-in |
I'll chop'em up with this.
Dan Helsper
Puryear, TN
-----Original Message-----
From: John Hofmann <jhofmann@reesgroupinc.com>
Sent: Thu, Jul 11, 2013 11:12 am
Subject: Re: Pietenpol-List: Alliance Ohio Fly-in
I am based 60 north of Brodhead. We were in bad shape up until the past wee
kend. All seems good now and it should be dry here for the next week (accor
ding to the forecast). Sunday was the first day I was able to take theRocke
t out since May, it has been so wet.
The real problem this year will be the mosquitos. The rain has made a real
good crop this year.
John Hofmann
Vice-President, Information Technology
The Rees Group, Inc.
2424 American Lane
Madison, WI 53704
Phone: 608.443.2468 ext 150
Fax: 608.443.2474
Email: jhofmann@reesgroupinc.com
On Jul 11, 2013, at 10:38 AM, airlion2@gmail.com wrote:
Does anyone know about the field conditions at Brodhead? Have they had as m
uch rain as everyone else? I will need a sub to get out of the Atlanta area
. Cheers, Gardiner
Sent from my iPad
On Jul 11, 2013, at 9:55 AM, shad bell <aviatorbell@yahoo.com> wrote:
I am planning on flying the piet up on saturday morning if the runway dries
out. we have had 3- 4 inches of rain in the past week. Does anyone know
if Barber field is a giant wet sponge at this point?
Shad
NX92GB
--------------------------------------------
On Thu, 7/11/13, skipgadd@earthlink.net <skipgadd@earthlink.net> wrote:
Subject: RE: Pietenpol-List: Alliance Ohio Fly-in
--> Pietenpol-List message posted
by: "skipgadd@earthlink.net"
<skipgadd@earthlink.net>
Ed Delancey and I are planning to drive up Friday. That is
if the power
here comes back on and I can leave Cinda home alone.
Skip
[Original Message]
From: Pietflyer1977 <rob@stoinoff.com>
Subject: Pietenpol-List: Alliance Ohio Fly-in
"Pietflyer1977" <rob@stoinoff.com>
Is anyone in the Midwest going to the Barber Airport
fly-in this weekend
in Alliance, OH ? Anyone ever go? A good fly-in with a good
turn out? Thanks
Read this topic online here:
http://forums.matronics.com/viewtopic.php?p=404431#404431
Email Forum -
- MATRONICS WEB FORUMS -
List Contribution Web Site -
-Matt
Dralle, List - The --> http://www.matr &n
- &nbs --> http://www.matronics.com/co====
============
Message 9
INDEX | Back to Main INDEX |
PREVIOUS | Skip to PREVIOUS Message |
NEXT | Skip to NEXT Message |
LIST | Reply to LIST Regarding this Message |
SENDER | Reply to SENDER Regarding this Message |
|
I finalized my logo design and installed it today....I think it sets it off pretty
good!
--------
NX321LR
ON THE FINAL PUSH!!
Mitsubishi Powered
Read this topic online here:
http://forums.matronics.com/viewtopic.php?p=404489#404489
Attachments:
http://forums.matronics.com//files/logo1_195.jpg
Message 10
INDEX | Back to Main INDEX |
PREVIOUS | Skip to PREVIOUS Message |
NEXT | Skip to NEXT Message |
LIST | Reply to LIST Regarding this Message |
SENDER | Reply to SENDER Regarding this Message |
|
Nice!
Gary Boothe
NX308MB
-----Original Message-----
From: owner-pietenpol-list-server@matronics.com
[mailto:owner-pietenpol-list-server@matronics.com] On Behalf Of Chris Rusch
Sent: Thursday, July 11, 2013 1:14 PM
Subject: Pietenpol-List: Logo Design.
--> <rmdinfo@rmdbenders.com>
I finalized my logo design and installed it today....I think it sets it off
pretty good!
--------
NX321LR
ON THE FINAL PUSH!!
Mitsubishi Powered
Read this topic online here:
http://forums.matronics.com/viewtopic.php?p=404489#404489
Attachments:
http://forums.matronics.com//files/logo1_195.jpg
Message 11
INDEX | Back to Main INDEX |
PREVIOUS | Skip to PREVIOUS Message |
NEXT | Skip to NEXT Message |
LIST | Reply to LIST Regarding this Message |
SENDER | Reply to SENDER Regarding this Message |
|
Subject: | Re: Logo Design. |
Very cool!
--------
Earl Brown
I may not have gone where I intended to go, but I think I have ended up where I
intended to be.
Read this topic online here:
http://forums.matronics.com/viewtopic.php?p=404492#404492
Message 12
INDEX | Back to Main INDEX |
PREVIOUS | Skip to PREVIOUS Message |
NEXT | Skip to NEXT Message |
LIST | Reply to LIST Regarding this Message |
SENDER | Reply to SENDER Regarding this Message |
|
Subject: | Re: Logo Design. |
Very cool, With him flapping his wings you should have one heck of a climb rate.
Very patriotic too.
--------
Scott Liefeld
Flying N11MS since March 1972
Steel Tube
C-85-12
Wire Wheels
Brodhead in 1996
Read this topic online here:
http://forums.matronics.com/viewtopic.php?p=404494#404494
Message 13
INDEX | Back to Main INDEX |
PREVIOUS | Skip to PREVIOUS Message |
NEXT | Skip to NEXT Message |
LIST | Reply to LIST Regarding this Message |
SENDER | Reply to SENDER Regarding this Message |
|
Subject: | Re: Logo Design. |
Chris very nice!
Sent from my iPhone
On Jul 11, 2013, at 3:13 PM, "Chris Rusch" <rmdinfo@rmdbenders.com> wrote:
>
> I finalized my logo design and installed it today....I think it sets it off pretty
good!
>
> --------
> NX321LR
> ON THE FINAL PUSH!!
> Mitsubishi Powered
>
>
>
>
> Read this topic online here:
>
> http://forums.matronics.com/viewtopic.php?p=404489#404489
>
>
>
>
> Attachments:
>
> http://forums.matronics.com//files/logo1_195.jpg
>
>
>
>
>
>
>
Message 14
INDEX | Back to Main INDEX |
PREVIOUS | Skip to PREVIOUS Message |
NEXT | Skip to NEXT Message |
LIST | Reply to LIST Regarding this Message |
SENDER | Reply to SENDER Regarding this Message |
|
Like It!
Barry
-----Original Message-----
From: owner-pietenpol-list-server@matronics.com
[mailto:owner-pietenpol-list-server@matronics.com] On Behalf Of Chris Rusch
Sent: Thursday, July 11, 2013 4:14 PM
Subject: Pietenpol-List: Logo Design.
--> <rmdinfo@rmdbenders.com>
I finalized my logo design and installed it today....I think it sets it off
pretty good!
--------
NX321LR
ON THE FINAL PUSH!!
Mitsubishi Powered
Read this topic online here:
http://forums.matronics.com/viewtopic.php?p=404489#404489
Attachments:
http://forums.matronics.com//files/logo1_195.jpg
Message 15
INDEX | Back to Main INDEX |
PREVIOUS | Skip to PREVIOUS Message |
NEXT | Skip to NEXT Message |
LIST | Reply to LIST Regarding this Message |
SENDER | Reply to SENDER Regarding this Message |
|
Subject: | Re: Logo Design. |
UNCLASSIFIED
Is your plane from the republic of Pietmania or Pietenstan?
;-}
Steve D
On 07/11/13, Chris Rusch wrote:
>
> I finalized my logo design and installed it today....I think it sets it off pretty
good!
>
> --------
> NX321LR
> ON THE FINAL PUSH!!
> Mitsubishi Powered
>
>
>
>
> Read this topic online here:
>
> http://forums.matronics.com/viewtopic.php?p=404489#404489
>
>
>
>
> Attachments:
>
> http://forums.matronics.com//files/logo1_195.jpg
>
>
>
>
UNCLASSIFIED
Message 16
INDEX | Back to Main INDEX |
PREVIOUS | Skip to PREVIOUS Message |
NEXT | Skip to NEXT Message |
LIST | Reply to LIST Regarding this Message |
SENDER | Reply to SENDER Regarding this Message |
|
Subject: | Re: Logo Design. |
Very nice Chris; it goes with your paint scheme well.
Jim B.
Message 17
INDEX | Back to Main INDEX |
PREVIOUS | Skip to PREVIOUS Message |
NEXT | Skip to NEXT Message |
LIST | Reply to LIST Regarding this Message |
SENDER | Reply to SENDER Regarding this Message |
|
Looks great, Chris! Is that paint or vinyl?
Jack Phillips
NX899JP
Smith Mountain Lake, Virginia
-----Original Message-----
From: owner-pietenpol-list-server@matronics.com
[mailto:owner-pietenpol-list-server@matronics.com] On Behalf Of Chris Rusch
Sent: Thursday, July 11, 2013 4:14 PM
Subject: Pietenpol-List: Logo Design.
I finalized my logo design and installed it today....I think it sets it off
pretty good!
--------
NX321LR
ON THE FINAL PUSH!!
Mitsubishi Powered
Read this topic online here:
http://forums.matronics.com/viewtopic.php?p=404489#404489
Attachments:
http://forums.matronics.com//files/logo1_195.jpg
Message 18
INDEX | Back to Main INDEX |
PREVIOUS | Skip to PREVIOUS Message |
NEXT | Skip to NEXT Message |
LIST | Reply to LIST Regarding this Message |
SENDER | Reply to SENDER Regarding this Message |
|
Subject: | Re: Logo Design. |
It looks great, but I, for one, would like to see the other markings as well. It
looks like there is lettering by the cockpit.
We want more!
--------
Semper Fi,
Terry Hand
Athens, GA
Read this topic online here:
http://forums.matronics.com/viewtopic.php?p=404514#404514
Message 19
INDEX | Back to Main INDEX |
PREVIOUS | Skip to PREVIOUS Message |
NEXT | Skip to NEXT Message |
LIST | Reply to LIST Regarding this Message |
SENDER | Reply to SENDER Regarding this Message |
|
UNCLASSIFIED
Dan, Love the look.
Discussion on another list (Beech) talked quite a bit about the value of going
from 2 to 3 blades on General Aviation airplanes
Two blades is more efficient than three blades in all areas, except ground clearance
and noise. On most prop planes the prop makes most of the noise, Engine
is second. Look at the videos of the electric Sonex E-flight. The plane is almost
as noisy as a regular plane.
One member is an aerodynamics professor. He said it came down to this. The very
most efficient prop is a Single, Big, Long Blade turning at slower RPM with great
torque. Yes, a single, one side is a blade, the other is like a club. As
you add, blades they become smaller bladed and shorter and less efficient. as
you get into 3,4 and more blades they nowstart to run in each other's turbulance
and the airflow becomes less smooth. Smaller diameter props have to run faster
to make the same thrust. Also the Prop becomes more of a gyroscope as blades
are added.
That is why early planes with low horsepower engines, turning slow with big props
were somewhat efficient. while early ultralights with fast turning chainsaw
engines turning small props make a lot of noise with wasted horsepower.
Blue Skies,
Steve D
On 07/11/13, helspersew@aol.com wrote:
> I'll chop'em up with this.
>
> Dan Helsper
> Puryear, TN
>
>
> -----Original Message-----
> From: John Hofmann <jhofmann@reesgroupinc.com>
> To: pietenpol-list <pietenpol-list@matronics.com>
> Sent: Thu, Jul 11, 2013 11:12 am
> Subject: Re: Pietenpol-List: Alliance Ohio Fly-in
>
> I am based 60 north of Brodhead. We were in bad shape up until the past weekend.
All seems good now and it should be dry here for the next week (according
to the forecast). Sunday was the first day I was able to take theRocket out since
May, it has been so wet.
>
> The real problem this year will be the mosquitos. The rain has made a real good
crop this year.
>
>
>
> John Hofmann
> Vice-President, Information Technology
> The Rees Group, Inc.
> 2424 American Lane
> Madison, WI 53704
> Phone: 608.443.2468 ext 150
> Fax: 608.443.2474
> Email: jhofmann@reesgroupinc.com(blockedmailto:jhofmann@reesgroupinc.com)
>
>
>
> On Jul 11, 2013, at 10:38 AM, airlion2@gmail.com(blockedmailto:airlion2@gmail.com) wrote:
>
>
> >
> > Does anyone know about the field conditions at Brodhead? Have they had as much
rain as everyone else? I will need a sub to get out of the Atlanta area .
Cheers, Gardiner
> >
> > Sent from my iPad
> >
> > On Jul 11, 2013, at 9:55 AM, shad bell <aviatorbell@yahoo.com(blockedmailto:aviatorbell@yahoo.com)> wrote:
> >
> >
> > >
> > > I am planning on flying the piet up on saturday morning if the runway dries
out. we have had 3- 4 inches of rain in the past week. Does anyone know if
Barber field is a giant wet sponge at this point?
> > >
> > > Shad
> > > NX92GB
> > > --------------------------------------------
> > > On Thu, 7/11/13, skipgadd@earthlink.net(blockedmailto:skipgadd@earthlink.net) <skipgadd@earthlink.net(blockedmailto:skipgadd@earthlink.net)> wrote:
> > >
> > > Subject: RE: Pietenpol-List: Alliance Ohio Fly-in
> > > To: pietenpol-list@matronics.com(blockedmailto:pietenpol-list@matronics.com)
> > > Date: Thursday, July 11, 2013, 8:39 AM
> > >
> > > --> Pietenpol-List message posted
> > > by: "skipgadd@earthlink.net(blockedmailto:skipgadd@earthlink.net)"
> > > <skipgadd@earthlink.net(blockedmailto:skipgadd@earthlink.net)>
> > >
> > > Ed Delancey and I are planning to drive up Friday. That is
> > > if the power
> > > here comes back on and I can leave Cinda home alone.
> > > Skip
> > >
> > >
> > >
> > > > [Original Message]
> > > > From: Pietflyer1977 <rob@stoinoff.com(blockedmailto:rob@stoinoff.com)>
> > > > To: <pietenpol-list@matronics.com(blockedmailto:pietenpol-list@matronics.com)>
> > > > Date: 7/10/2013 9:02:11 PM
> > > > Subject: Pietenpol-List: Alliance Ohio Fly-in
> > > >
> > > >
> > > "Pietflyer1977" <rob@stoinoff.com(blockedmailto:rob@stoinoff.com)>
> > >
> > > >
> > > > Is anyone in the Midwest going to the Barber Airport
> > > >
> > > fly-in this weekend
> > > in Alliance, OH ? Anyone ever go? A good fly-in with a good
> > > turn out? Thanks
> > >
> > > >
> > > >
> > > >
> > > >
> > > > Read this topic online here:
> > > >
> > > > http://forums.matronics.com/viewtopic.php?p=404431#404431(blockedhttp://forums.matronics.com/viewtopic.php?p=404431#404431)
> > > >
> > >
> > >
> > >
> > > Email Forum -
> > > - MATRONICS WEB FORUMS -
> > > List Contribution Web Site -
> > > -Matt
> > > Dralle, List - The --> (blockedhttp://www.matronics.com/Navigator?Pietenpol-List" target="1">http://www.matr &n - &nbs --> http://www.matronics.com/co================
> > >
> > >
> > >
> > >
> >
>
>
>
> w,courier" size="2"> _blank">http://www.matronics.com/contribution
UNCLASSIFIED
Message 20
INDEX | Back to Main INDEX |
PREVIOUS | Skip to PREVIOUS Message |
NEXT | Skip to NEXT Message |
LIST | Reply to LIST Regarding this Message |
SENDER | Reply to SENDER Regarding this Message |
|
Subject: | Re: Logo Design. |
Ok, here are some more!
--------
NX321LR
ON THE FINAL PUSH!!
Mitsubishi Powered
Read this topic online here:
http://forums.matronics.com/viewtopic.php?p=404516#404516
Attachments:
http://forums.matronics.com//files/image_946.jpg
http://forums.matronics.com//files/image_757.jpg
http://forums.matronics.com//files/image_320.jpg
Message 21
INDEX | Back to Main INDEX |
PREVIOUS | Skip to PREVIOUS Message |
NEXT | Skip to NEXT Message |
LIST | Reply to LIST Regarding this Message |
SENDER | Reply to SENDER Regarding this Message |
|
Subject: | Re: Logo Design. |
If your wondering, Bags was my dads nickname and he started this plane in the mid
70's........ He passed away in 2002 with only the fusalage completed. so I
finished the plane and named it after him. That name is hand painted and the bird
logo is vinyl.
--------
NX321LR
ON THE FINAL PUSH!!
Mitsubishi Powered
Read this topic online here:
http://forums.matronics.com/viewtopic.php?p=404517#404517
Message 22
INDEX | Back to Main INDEX |
PREVIOUS | Skip to PREVIOUS Message |
NEXT | Skip to NEXT Message |
LIST | Reply to LIST Regarding this Message |
SENDER | Reply to SENDER Regarding this Message |
|
Subject: | My windscreen design... |
I saw a windscreen made like this at fantasy of flight while taking a tour, so
I thought I would give it a try.....032 3003-h14, with a rolled wire edge. I have
to cut out the middle yet, but you get the idea
--------
NX321LR
ON THE FINAL PUSH!!
Mitsubishi Powered
Read this topic online here:
http://forums.matronics.com/viewtopic.php?p=404519#404519
Attachments:
http://forums.matronics.com//files/image_481.jpg
http://forums.matronics.com//files/image_136.jpg
http://forums.matronics.com//files/image_395.jpg
Message 23
INDEX | Back to Main INDEX |
PREVIOUS | Skip to PREVIOUS Message |
NEXT | Skip to NEXT Message |
LIST | Reply to LIST Regarding this Message |
SENDER | Reply to SENDER Regarding this Message |
|
Subject: | Re: My windscreen design... |
UNCLASSIFIED
Uh, won't that be hard to see through? I Thought Plexiglass would be easier to
see through?
LOL
Steve D
On 07/11/13, Chris Rusch wrote:
>
> I saw a windscreen made like this at fantasy of flight while taking a tour, so
I thought I would give it a try.....032 3003-h14, with a rolled wire edge. I
have to cut out the middle yet, but you get the idea
>
> --------
> NX321LR
> ON THE FINAL PUSH!!
> Mitsubishi Powered
>
>
>
>
> Read this topic online here:
>
> http://forums.matronics.com/viewtopic.php?p=404519#404519
>
>
>
>
> Attachments:
>
> http://forums.matronics.com//files/image_481.jpg
> http://forums.matronics.com//files/image_136.jpg
> http://forums.matronics.com//files/image_395.jpg
>
>
>
>
UNCLASSIFIED
Message 24
INDEX | Back to Main INDEX |
PREVIOUS | Skip to PREVIOUS Message |
NEXT | Skip to NEXT Message |
LIST | Reply to LIST Regarding this Message |
SENDER | Reply to SENDER Regarding this Message |
|
Subject: | Re: Logo Design. |
UNCLASSIFIED
Love It. I really like the gascolator access panel. Might do that myself.
Steve "I never had a good idea, but I have stolen some
On 07/11/13, Chris Rusch wrote:
>
> Ok, here are some more!
>
> --------
> NX321LR
> ON THE FINAL PUSH!!
> Mitsubishi Powered
>
>
>
>
> Read this topic online here:
>
> http://forums.matronics.com/viewtopic.php?p=404516#404516
>
>
>
>
> Attachments:
>
> http://forums.matronics.com//files/image_946.jpg
> http://forums.matronics.com//files/image_757.jpg
> http://forums.matronics.com//files/image_320.jpg
>
>
>
>
UNCLASSIFIED
Other Matronics Email List Services
These Email List Services are sponsored solely by Matronics and through the generous Contributions of its members.
-- Please support this service by making your Contribution today! --
|