---------------------------------------------------------- Pietenpol-List Digest Archive --- Total Messages Posted Thu 07/11/13: 24 ---------------------------------------------------------- Today's Message Index: ---------------------- 1. 04:40 AM - Re: A engine out (bender) 2. 05:30 AM - Re: Continental Conn Rod Bolts (tkreiner) 3. 05:39 AM - Re: Alliance Ohio Fly-in (skipgadd@earthlink.net) 4. 06:55 AM - Re: Alliance Ohio Fly-in (shad bell) 5. 08:38 AM - Re: Alliance Ohio Fly-in (airlion2@gmail.com) 6. 08:53 AM - Re: Alliance Ohio Fly-in (John Hofmann) 7. 09:06 AM - Re: Alliance Ohio Fly-in (TOM STINEMETZE) 8. 09:40 AM - Re: Alliance Ohio Fly-in (helspersew@aol.com) 9. 01:13 PM - Logo Design. (Chris Rusch) 10. 01:37 PM - Re: Logo Design. (Gary Boothe) 11. 01:42 PM - Re: Logo Design. (echobravo4) 12. 01:46 PM - Re: Logo Design. (AircamperN11MS) 13. 03:32 PM - Re: Logo Design. (Jack) 14. 03:51 PM - Re: Logo Design. (Barry Davis) 15. 04:01 PM - Re: Logo Design. (Dortch, Steven D MAJ MIL USA NGB) 16. 04:22 PM - Re: Logo Design. (Jim Boyer) 17. 04:39 PM - Re: Logo Design. (Jack Phillips) 18. 04:50 PM - Re: Logo Design. (jarheadpilot82) 19. 04:55 PM - 4 blade prop (Dortch, Steven D MAJ MIL USA NGB) 20. 07:01 PM - Re: Logo Design. (Chris Rusch) 21. 07:07 PM - Re: Logo Design. (Chris Rusch) 22. 07:15 PM - My windscreen design... (Chris Rusch) 23. 07:53 PM - Re: My windscreen design... (Dortch, Steven D MAJ MIL USA NGB) 24. 07:59 PM - Re: Re: Logo Design. (Dortch, Steven D MAJ MIL USA NGB) ________________________________ Message 1 _____________________________________ Time: 04:40:28 AM PST US Subject: Pietenpol-List: Re: A engine out From: "bender" That "four square" idea is exactly what I have. .. the damage is in four places equally spaced. .. the skirt on each corner has scuff marks. . I'll be looking at everything close Thanks guys Jeff Read this topic online here: http://forums.matronics.com/viewtopic.php?p=404459#404459 ________________________________ Message 2 _____________________________________ Time: 05:30:45 AM PST US Subject: Pietenpol-List: Re: Continental Conn Rod Bolts From: "tkreiner" Picture of the Conn Rod Bolts... -------- Tom Kreiner Read this topic online here: http://forums.matronics.com/viewtopic.php?p=404461#404461 Attachments: http://forums.matronics.com//files/conn_rod_bolts_145.jpg ________________________________ Message 3 _____________________________________ Time: 05:39:48 AM PST US From: "skipgadd@earthlink.net" Subject: RE: Pietenpol-List: Alliance Ohio Fly-in Ed Delancey and I are planning to drive up Friday. That is if the power here comes back on and I can leave Cinda home alone. Skip > [Original Message] > From: Pietflyer1977 > To: > Date: 7/10/2013 9:02:11 PM > Subject: Pietenpol-List: Alliance Ohio Fly-in > > > Is anyone in the Midwest going to the Barber Airport fly-in this weekend in Alliance, OH ? Anyone ever go? A good fly-in with a good turn out? Thanks > > > Read this topic online here: > > http://forums.matronics.com/viewtopic.php?p=404431#404431 > > ________________________________ Message 4 _____________________________________ Time: 06:55:26 AM PST US From: shad bell Subject: RE: Pietenpol-List: Alliance Ohio Fly-in I am planning on flying the piet up on saturday morning if the runway dries out. we have had 3- 4 inches of rain in the past week. Does anyone know if Barber field is a giant wet sponge at this point? Shad NX92GB -------------------------------------------- On Thu, 7/11/13, skipgadd@earthlink.net wrote: Subject: RE: Pietenpol-List: Alliance Ohio Fly-in To: pietenpol-list@matronics.com Date: Thursday, July 11, 2013, 8:39 AM --> Pietenpol-List message posted by: "skipgadd@earthlink.net" Ed Delancey and I are planning to drive up Friday. That is if the power here comes back on and I can leave Cinda home alone. Skip > [Original Message] > From: Pietflyer1977 > To: > Date: 7/10/2013 9:02:11 PM > Subject: Pietenpol-List: Alliance Ohio Fly-in > "Pietflyer1977" > > Is anyone in the Midwest going to the Barber Airport fly-in this weekend in Alliance, OH ? Anyone ever go? A good fly-in with a good turn out? Thanks > > > > > Read this topic online here: > > http://forums.matronics.com/viewtopic.php?p=404431#404431 > > > > > > > > > > Email Forum - - MATRONICS WEB FORUMS - List Contribution Web Site - -Matt Dralle, List Admin. ________________________________ Message 5 _____________________________________ Time: 08:38:48 AM PST US From: airlion2@gmail.com Subject: Re: Pietenpol-List: Alliance Ohio Fly-in Does anyone know about the field conditions at Brodhead? Have they had as much rain as everyone else? I will need a sub to get out of the Atlanta area . Cheers, Gardiner Sent from my iPad On Jul 11, 2013, at 9:55 AM, shad bell wrote: > > I am planning on flying the piet up on saturday morning if the runway dries out. we have had 3- 4 inches of rain in the past week. Does anyone know if Barber field is a giant wet sponge at this point? > > Shad > NX92GB > -------------------------------------------- > On Thu, 7/11/13, skipgadd@earthlink.net wrote: > > Subject: RE: Pietenpol-List: Alliance Ohio Fly-in > To: pietenpol-list@matronics.com > Date: Thursday, July 11, 2013, 8:39 AM > > --> Pietenpol-List message posted > by: "skipgadd@earthlink.net" > > > Ed Delancey and I are planning to drive up Friday. That is > if the power > here comes back on and I can leave Cinda home alone. > Skip > > >> [Original Message] >> From: Pietflyer1977 >> To: >> Date: 7/10/2013 9:02:11 PM >> Subject: Pietenpol-List: Alliance Ohio Fly-in >> > "Pietflyer1977" >> >> Is anyone in the Midwest going to the Barber Airport > fly-in this weekend > in Alliance, OH ? Anyone ever go? A good fly-in with a good > turn out? Thanks >> >> >> >> >> Read this topic online here: >> >> http://forums.matronics.com/viewtopic.php?p=404431#404431 > > > > Email Forum - > - MATRONICS WEB FORUMS - > List Contribution Web Site - > -Matt > Dralle, List Admin. > > > > > > > > > ________________________________ Message 6 _____________________________________ Time: 08:53:54 AM PST US From: John Hofmann Subject: Re: Pietenpol-List: Alliance Ohio Fly-in I am based 60 north of Brodhead. We were in bad shape up until the past weekend. All seems good now and it should be dry here for the next week (according to the forecast). Sunday was the first day I was able to take theRocket out since May, it has been so wet. The real problem this year will be the mosquitos. The rain has made a real good crop this year. John Hofmann Vice-President, Information Technology The Rees Group, Inc. 2424 American Lane Madison, WI 53704 Phone: 608.443.2468 ext 150 Fax: 608.443.2474 Email: jhofmann@reesgroupinc.com On Jul 11, 2013, at 10:38 AM, airlion2@gmail.com wrote: > > Does anyone know about the field conditions at Brodhead? Have they had as much rain as everyone else? I will need a sub to get out of the Atlanta area . Cheers, Gardiner > > Sent from my iPad > > On Jul 11, 2013, at 9:55 AM, shad bell wrote: > >> >> I am planning on flying the piet up on saturday morning if the runway dries out. we have had 3- 4 inches of rain in the past week. Does anyone know if Barber field is a giant wet sponge at this point? >> >> Shad >> NX92GB >> -------------------------------------------- >> On Thu, 7/11/13, skipgadd@earthlink.net wrote: >> >> Subject: RE: Pietenpol-List: Alliance Ohio Fly-in >> To: pietenpol-list@matronics.com >> Date: Thursday, July 11, 2013, 8:39 AM >> >> --> Pietenpol-List message posted >> by: "skipgadd@earthlink.net" >> >> >> Ed Delancey and I are planning to drive up Friday. That is >> if the power >> here comes back on and I can leave Cinda home alone. >> Skip >> >> >>> [Original Message] >>> From: Pietflyer1977 >>> To: >>> Date: 7/10/2013 9:02:11 PM >>> Subject: Pietenpol-List: Alliance Ohio Fly-in >>> >> "Pietflyer1977" >>> >>> Is anyone in the Midwest going to the Barber Airport >> fly-in this weekend >> in Alliance, OH ? Anyone ever go? A good fly-in with a good >> turn out? Thanks >>> >>> >>> >>> >>> Read this topic online here: >>> >>> http://forums.matronics.com/viewtopic.php?p=404431#404431 >> >> >> >> Email Forum - >> - MATRONICS WEB FORUMS - >> List Contribution Web Site - >> -Matt >> Dralle, List Admin. >> >> >> >> >> >> >> >> >> > > > > > ________________________________ Message 7 _____________________________________ Time: 09:06:13 AM PST US From: "TOM STINEMETZE" Subject: Re: Pietenpol-List: Alliance Ohio Fly-in Has anybody given thought to harnessing those pests for extra motive power? I know it can be done with the common house fly but the return on investment is hard to track. Stinemetze Looking forward to Brodhead! do not archive >>> John Hofmann 7/11/2013 10:53 AM >>> I am based 60 north of Brodhead. We were in bad shape up until the past weekend. All seems good now and it should be dry here for the next week (according to the forecast). Sunday was the first day I was able to take theRocket out since May, it has been so wet. The real problem this year will be the mosquitos. The rain has made a real good crop this year. John Hofmann Vice-President, Information Technology The Rees Group, Inc. 2424 American Lane Madison, WI 53704 Phone: 608.443.2468 ext 150 Fax: 608.443.2474 Email: jhofmann@reesgroupinc.com ________________________________ Message 8 _____________________________________ Time: 09:40:09 AM PST US Subject: Re: Pietenpol-List: Alliance Ohio Fly-in From: helspersew@aol.com I'll chop'em up with this. Dan Helsper Puryear, TN -----Original Message----- From: John Hofmann Sent: Thu, Jul 11, 2013 11:12 am Subject: Re: Pietenpol-List: Alliance Ohio Fly-in I am based 60 north of Brodhead. We were in bad shape up until the past wee kend. All seems good now and it should be dry here for the next week (accor ding to the forecast). Sunday was the first day I was able to take theRocke t out since May, it has been so wet. The real problem this year will be the mosquitos. The rain has made a real good crop this year. John Hofmann Vice-President, Information Technology The Rees Group, Inc. 2424 American Lane Madison, WI 53704 Phone: 608.443.2468 ext 150 Fax: 608.443.2474 Email: jhofmann@reesgroupinc.com On Jul 11, 2013, at 10:38 AM, airlion2@gmail.com wrote: Does anyone know about the field conditions at Brodhead? Have they had as m uch rain as everyone else? I will need a sub to get out of the Atlanta area . Cheers, Gardiner Sent from my iPad On Jul 11, 2013, at 9:55 AM, shad bell wrote: I am planning on flying the piet up on saturday morning if the runway dries out. we have had 3- 4 inches of rain in the past week. Does anyone know if Barber field is a giant wet sponge at this point? Shad NX92GB -------------------------------------------- On Thu, 7/11/13, skipgadd@earthlink.net wrote: Subject: RE: Pietenpol-List: Alliance Ohio Fly-in --> Pietenpol-List message posted by: "skipgadd@earthlink.net" Ed Delancey and I are planning to drive up Friday. That is if the power here comes back on and I can leave Cinda home alone. Skip [Original Message] From: Pietflyer1977 Subject: Pietenpol-List: Alliance Ohio Fly-in "Pietflyer1977" Is anyone in the Midwest going to the Barber Airport fly-in this weekend in Alliance, OH ? Anyone ever go? A good fly-in with a good turn out? Thanks Read this topic online here: http://forums.matronics.com/viewtopic.php?p=404431#404431 Email Forum - - MATRONICS WEB FORUMS - List Contribution Web Site - -Matt Dralle, List - The --> http://www.matr &n - &nbs --> http://www.matronics.com/co==== ============ ________________________________ Message 9 _____________________________________ Time: 01:13:54 PM PST US Subject: Pietenpol-List: Logo Design. From: "Chris Rusch" I finalized my logo design and installed it today....I think it sets it off pretty good! -------- NX321LR ON THE FINAL PUSH!! Mitsubishi Powered Read this topic online here: http://forums.matronics.com/viewtopic.php?p=404489#404489 Attachments: http://forums.matronics.com//files/logo1_195.jpg ________________________________ Message 10 ____________________________________ Time: 01:37:05 PM PST US From: "Gary Boothe" Subject: RE: Pietenpol-List: Logo Design. Nice! Gary Boothe NX308MB -----Original Message----- From: owner-pietenpol-list-server@matronics.com [mailto:owner-pietenpol-list-server@matronics.com] On Behalf Of Chris Rusch Sent: Thursday, July 11, 2013 1:14 PM Subject: Pietenpol-List: Logo Design. --> I finalized my logo design and installed it today....I think it sets it off pretty good! -------- NX321LR ON THE FINAL PUSH!! Mitsubishi Powered Read this topic online here: http://forums.matronics.com/viewtopic.php?p=404489#404489 Attachments: http://forums.matronics.com//files/logo1_195.jpg ________________________________ Message 11 ____________________________________ Time: 01:42:59 PM PST US Subject: Pietenpol-List: Re: Logo Design. From: "echobravo4" Very cool! -------- Earl Brown I may not have gone where I intended to go, but I think I have ended up where I intended to be. Read this topic online here: http://forums.matronics.com/viewtopic.php?p=404492#404492 ________________________________ Message 12 ____________________________________ Time: 01:46:30 PM PST US Subject: Pietenpol-List: Re: Logo Design. From: "AircamperN11MS" Very cool, With him flapping his wings you should have one heck of a climb rate. Very patriotic too. -------- Scott Liefeld Flying N11MS since March 1972 Steel Tube C-85-12 Wire Wheels Brodhead in 1996 Read this topic online here: http://forums.matronics.com/viewtopic.php?p=404494#404494 ________________________________ Message 13 ____________________________________ Time: 03:32:48 PM PST US Subject: Re: Pietenpol-List: Logo Design. From: Jack Chris very nice! Sent from my iPhone On Jul 11, 2013, at 3:13 PM, "Chris Rusch" wrote: > > I finalized my logo design and installed it today....I think it sets it off pretty good! > > -------- > NX321LR > ON THE FINAL PUSH!! > Mitsubishi Powered > > > > > Read this topic online here: > > http://forums.matronics.com/viewtopic.php?p=404489#404489 > > > > > Attachments: > > http://forums.matronics.com//files/logo1_195.jpg > > > > > > > ________________________________ Message 14 ____________________________________ Time: 03:51:36 PM PST US From: "Barry Davis" Subject: RE: Pietenpol-List: Logo Design. Like It! Barry -----Original Message----- From: owner-pietenpol-list-server@matronics.com [mailto:owner-pietenpol-list-server@matronics.com] On Behalf Of Chris Rusch Sent: Thursday, July 11, 2013 4:14 PM Subject: Pietenpol-List: Logo Design. --> I finalized my logo design and installed it today....I think it sets it off pretty good! -------- NX321LR ON THE FINAL PUSH!! Mitsubishi Powered Read this topic online here: http://forums.matronics.com/viewtopic.php?p=404489#404489 Attachments: http://forums.matronics.com//files/logo1_195.jpg ________________________________ Message 15 ____________________________________ Time: 04:01:43 PM PST US From: "Dortch, Steven D MAJ MIL USA NGB" Subject: Re: Pietenpol-List: Logo Design. UNCLASSIFIED Is your plane from the republic of Pietmania or Pietenstan? ;-} Steve D On 07/11/13, Chris Rusch wrote: > > I finalized my logo design and installed it today....I think it sets it off pretty good! > > -------- > NX321LR > ON THE FINAL PUSH!! > Mitsubishi Powered > > > > > Read this topic online here: > > http://forums.matronics.com/viewtopic.php?p=404489#404489 > > > > > Attachments: > > http://forums.matronics.com//files/logo1_195.jpg > > > > UNCLASSIFIED ________________________________ Message 16 ____________________________________ Time: 04:22:45 PM PST US From: Jim Boyer Subject: Re: Pietenpol-List: Logo Design. Very nice Chris; it goes with your paint scheme well. Jim B. ________________________________ Message 17 ____________________________________ Time: 04:39:31 PM PST US From: "Jack Phillips" Subject: RE: Pietenpol-List: Logo Design. Looks great, Chris! Is that paint or vinyl? Jack Phillips NX899JP Smith Mountain Lake, Virginia -----Original Message----- From: owner-pietenpol-list-server@matronics.com [mailto:owner-pietenpol-list-server@matronics.com] On Behalf Of Chris Rusch Sent: Thursday, July 11, 2013 4:14 PM Subject: Pietenpol-List: Logo Design. I finalized my logo design and installed it today....I think it sets it off pretty good! -------- NX321LR ON THE FINAL PUSH!! Mitsubishi Powered Read this topic online here: http://forums.matronics.com/viewtopic.php?p=404489#404489 Attachments: http://forums.matronics.com//files/logo1_195.jpg ________________________________ Message 18 ____________________________________ Time: 04:50:42 PM PST US Subject: Pietenpol-List: Re: Logo Design. From: "jarheadpilot82" It looks great, but I, for one, would like to see the other markings as well. It looks like there is lettering by the cockpit. We want more! -------- Semper Fi, Terry Hand Athens, GA Read this topic online here: http://forums.matronics.com/viewtopic.php?p=404514#404514 ________________________________ Message 19 ____________________________________ Time: 04:55:22 PM PST US From: "Dortch, Steven D MAJ MIL USA NGB" Subject: Pietenpol-List: 4 blade prop UNCLASSIFIED Dan, Love the look. Discussion on another list (Beech) talked quite a bit about the value of going from 2 to 3 blades on General Aviation airplanes Two blades is more efficient than three blades in all areas, except ground clearance and noise. On most prop planes the prop makes most of the noise, Engine is second. Look at the videos of the electric Sonex E-flight. The plane is almost as noisy as a regular plane. One member is an aerodynamics professor. He said it came down to this. The very most efficient prop is a Single, Big, Long Blade turning at slower RPM with great torque. Yes, a single, one side is a blade, the other is like a club. As you add, blades they become smaller bladed and shorter and less efficient. as you get into 3,4 and more blades they nowstart to run in each other's turbulance and the airflow becomes less smooth. Smaller diameter props have to run faster to make the same thrust. Also the Prop becomes more of a gyroscope as blades are added. That is why early planes with low horsepower engines, turning slow with big props were somewhat efficient. while early ultralights with fast turning chainsaw engines turning small props make a lot of noise with wasted horsepower. Blue Skies, Steve D On 07/11/13, helspersew@aol.com wrote: > I'll chop'em up with this. > > Dan Helsper > Puryear, TN > > > -----Original Message----- > From: John Hofmann > To: pietenpol-list > Sent: Thu, Jul 11, 2013 11:12 am > Subject: Re: Pietenpol-List: Alliance Ohio Fly-in > > I am based 60 north of Brodhead. We were in bad shape up until the past weekend. All seems good now and it should be dry here for the next week (according to the forecast). Sunday was the first day I was able to take theRocket out since May, it has been so wet. > > The real problem this year will be the mosquitos. The rain has made a real good crop this year. > > > > John Hofmann > Vice-President, Information Technology > The Rees Group, Inc. > 2424 American Lane > Madison, WI 53704 > Phone: 608.443.2468 ext 150 > Fax: 608.443.2474 > Email: jhofmann@reesgroupinc.com(blockedmailto:jhofmann@reesgroupinc.com) > > > > On Jul 11, 2013, at 10:38 AM, airlion2@gmail.com(blockedmailto:airlion2@gmail.com) wrote: > > > > > > Does anyone know about the field conditions at Brodhead? Have they had as much rain as everyone else? I will need a sub to get out of the Atlanta area . Cheers, Gardiner > > > > Sent from my iPad > > > > On Jul 11, 2013, at 9:55 AM, shad bell wrote: > > > > > > > > > > I am planning on flying the piet up on saturday morning if the runway dries out. we have had 3- 4 inches of rain in the past week. Does anyone know if Barber field is a giant wet sponge at this point? > > > > > > Shad > > > NX92GB > > > -------------------------------------------- > > > On Thu, 7/11/13, skipgadd@earthlink.net(blockedmailto:skipgadd@earthlink.net) wrote: > > > > > > Subject: RE: Pietenpol-List: Alliance Ohio Fly-in > > > To: pietenpol-list@matronics.com(blockedmailto:pietenpol-list@matronics.com) > > > Date: Thursday, July 11, 2013, 8:39 AM > > > > > > --> Pietenpol-List message posted > > > by: "skipgadd@earthlink.net(blockedmailto:skipgadd@earthlink.net)" > > > > > > > > > Ed Delancey and I are planning to drive up Friday. That is > > > if the power > > > here comes back on and I can leave Cinda home alone. > > > Skip > > > > > > > > > > > > > [Original Message] > > > > From: Pietflyer1977 > > > > To: > > > > Date: 7/10/2013 9:02:11 PM > > > > Subject: Pietenpol-List: Alliance Ohio Fly-in > > > > > > > > > > > "Pietflyer1977" > > > > > > > > > > > Is anyone in the Midwest going to the Barber Airport > > > > > > > fly-in this weekend > > > in Alliance, OH ? Anyone ever go? A good fly-in with a good > > > turn out? Thanks > > > > > > > > > > > > > > > > > > > > > > > Read this topic online here: > > > > > > > > http://forums.matronics.com/viewtopic.php?p=404431#404431(blockedhttp://forums.matronics.com/viewtopic.php?p=404431#404431) > > > > > > > > > > > > > > > > Email Forum - > > > - MATRONICS WEB FORUMS - > > > List Contribution Web Site - > > > -Matt > > > Dralle, List - The --> (blockedhttp://www.matronics.com/Navigator?Pietenpol-List" target="1">http://www.matr &n - &nbs --> http://www.matronics.com/co================ > > > > > > > > > > > > > > > > > > w,courier" size="2"> _blank">http://www.matronics.com/contribution UNCLASSIFIED ________________________________ Message 20 ____________________________________ Time: 07:01:53 PM PST US Subject: Pietenpol-List: Re: Logo Design. From: "Chris Rusch" Ok, here are some more! -------- NX321LR ON THE FINAL PUSH!! Mitsubishi Powered Read this topic online here: http://forums.matronics.com/viewtopic.php?p=404516#404516 Attachments: http://forums.matronics.com//files/image_946.jpg http://forums.matronics.com//files/image_757.jpg http://forums.matronics.com//files/image_320.jpg ________________________________ Message 21 ____________________________________ Time: 07:07:35 PM PST US Subject: Pietenpol-List: Re: Logo Design. From: "Chris Rusch" If your wondering, Bags was my dads nickname and he started this plane in the mid 70's........ He passed away in 2002 with only the fusalage completed. so I finished the plane and named it after him. That name is hand painted and the bird logo is vinyl. -------- NX321LR ON THE FINAL PUSH!! Mitsubishi Powered Read this topic online here: http://forums.matronics.com/viewtopic.php?p=404517#404517 ________________________________ Message 22 ____________________________________ Time: 07:15:40 PM PST US Subject: Pietenpol-List: My windscreen design... From: "Chris Rusch" I saw a windscreen made like this at fantasy of flight while taking a tour, so I thought I would give it a try.....032 3003-h14, with a rolled wire edge. I have to cut out the middle yet, but you get the idea -------- NX321LR ON THE FINAL PUSH!! Mitsubishi Powered Read this topic online here: http://forums.matronics.com/viewtopic.php?p=404519#404519 Attachments: http://forums.matronics.com//files/image_481.jpg http://forums.matronics.com//files/image_136.jpg http://forums.matronics.com//files/image_395.jpg ________________________________ Message 23 ____________________________________ Time: 07:53:56 PM PST US From: "Dortch, Steven D MAJ MIL USA NGB" Subject: Re: Pietenpol-List: My windscreen design... UNCLASSIFIED Uh, won't that be hard to see through? I Thought Plexiglass would be easier to see through? LOL Steve D On 07/11/13, Chris Rusch wrote: > > I saw a windscreen made like this at fantasy of flight while taking a tour, so I thought I would give it a try.....032 3003-h14, with a rolled wire edge. I have to cut out the middle yet, but you get the idea > > -------- > NX321LR > ON THE FINAL PUSH!! > Mitsubishi Powered > > > > > Read this topic online here: > > http://forums.matronics.com/viewtopic.php?p=404519#404519 > > > > > Attachments: > > http://forums.matronics.com//files/image_481.jpg > http://forums.matronics.com//files/image_136.jpg > http://forums.matronics.com//files/image_395.jpg > > > > UNCLASSIFIED ________________________________ Message 24 ____________________________________ Time: 07:59:25 PM PST US From: "Dortch, Steven D MAJ MIL USA NGB" Subject: Re: Pietenpol-List: Re: Logo Design. UNCLASSIFIED Love It. I really like the gascolator access panel. Might do that myself. Steve "I never had a good idea, but I have stolen some On 07/11/13, Chris Rusch wrote: > > Ok, here are some more! > > -------- > NX321LR > ON THE FINAL PUSH!! > Mitsubishi Powered > > > > > Read this topic online here: > > http://forums.matronics.com/viewtopic.php?p=404516#404516 > > > > > Attachments: > > http://forums.matronics.com//files/image_946.jpg > http://forums.matronics.com//files/image_757.jpg > http://forums.matronics.com//files/image_320.jpg > > > > UNCLASSIFIED ------------------------------------------------------------------------------------- Other Matronics Email List Services ------------------------------------------------------------------------------------- Post A New Message pietenpol-list@matronics.com UN/SUBSCRIBE http://www.matronics.com/subscription List FAQ http://www.matronics.com/FAQ/Pietenpol-List.htm Web Forum Interface To Lists http://forums.matronics.com Matronics List Wiki http://wiki.matronics.com Full Archive Search Engine http://www.matronics.com/search 7-Day List Browse http://www.matronics.com/browse/pietenpol-list Browse Digests http://www.matronics.com/digest/pietenpol-list Browse Other Lists http://www.matronics.com/browse Live Online Chat! http://www.matronics.com/chat Archive Downloading http://www.matronics.com/archives Photo Share http://www.matronics.com/photoshare Other Email Lists http://www.matronics.com/emaillists Contributions http://www.matronics.com/contribution ------------------------------------------------------------------------------------- These Email List Services are sponsored solely by Matronics and through the generous Contributions of its members.