---------------------------------------------------------- Pietenpol-List Digest Archive --- Total Messages Posted Wed 07/17/13: 8 ---------------------------------------------------------- Today's Message Index: ---------------------- 1. 04:43 AM - Re: Who's flying from TX, OK to Brodhead (caldwrl) 2. 04:57 AM - Re: Re: Who's flying from TX, OK to Brodhead NOW OT the one that got away (Dortch, Steven D MAJ MIL USA NGB) 3. 05:41 AM - Re: New Spar In Place (AircamperN11MS) 4. 09:12 AM - Re: Painting, step 1 (Rick Holland) 5. 11:01 AM - Re: wood vs steel struts (womenfly2) 6. 11:27 AM - Room reservation for Brodhead (brian.e.jardine@l-3com.com) 7. 12:50 PM - Re: Room reservation for Brodhead (Marcus Zechini) 8. 07:15 PM - Model-A throttle response (BYD) ________________________________ Message 1 _____________________________________ Time: 04:43:00 AM PST US Subject: Pietenpol-List: Re: Who's flying from TX, OK to Brodhead From: "caldwrl" I'm planning on flying up in my Stinson Voyager. Leaving on Wednesday morning from Mineola Wisener (3F9), but will stop off at St. Louis to spend a day and pick up my Son. We plan to depart Creve Coeur (1H0) on Friday morning direct to Brodhead. Let me know if this fits in your schedule or flight scheme. Hope to see you there. -------- Robert Caldwell Read this topic online here: http://forums.matronics.com/viewtopic.php?p=404827#404827 ________________________________ Message 2 _____________________________________ Time: 04:57:32 AM PST US From: "Dortch, Steven D MAJ MIL USA NGB" Subject: Re: Pietenpol-List: Re: Who's flying from TX, OK to Brodhead NOW OT the one that got away UNCLASSIFIED Robert, since you mentioned a Stinson, now I can tell you my story about the one that got away. In 1992 I was working in Dalhart, Texas. I went out to the airport to see what was going on and who rented airplanes. There was no flight school and no one renting, but the Lineboy mentioned that a part owner of a pretty Stinson Stationwagon had died and the family was trying to sell his half. When I saw the plane, it was awesome. It had been restored to prize winning status including an engine overhaul. I got the number and tried to contact the family. Never was able to get hold of them. Finally, I gave up. Later, I found out that it sold. The other partner told the family that they could do what they wanted but his half of the plane was staying right there in Dalhart. As a result there were no offers. Finally, a local rancher bought 1/2 of the plane for $2,500 so that his wife could learn to fly. The one that got away. Blue Skies, Steve D On 07/17/13, caldwrl wrote: > > I'm planning on flying up in my Stinson Voyager. Leaving on Wednesday morning from Mineola Wisener (3F9), but will stop off at St. Louis to spend a day and pick up my Son. We plan to depart Creve Coeur (1H0) on Friday morning direct to Brodhead. Let me know if this fits in your schedule or flight scheme. Hope to see you there. > > -------- > Robert Caldwell > > > > > Read this topic online here: > > http://forums.matronics.com/viewtopic.php?p=404827#404827 > > > > > > > UNCLASSIFIED ________________________________ Message 3 _____________________________________ Time: 05:41:41 AM PST US Subject: Pietenpol-List: Re: New Spar In Place From: "AircamperN11MS" Gary, Great to see the progress. Scott -------- Scott Liefeld Flying N11MS since March 1972 Steel Tube C-85-12 Wire Wheels Brodhead in 1996 Read this topic online here: http://forums.matronics.com/viewtopic.php?p=404829#404829 ________________________________ Message 4 _____________________________________ Time: 09:12:07 AM PST US Subject: Re: Pietenpol-List: Painting, step 1 From: Rick Holland Will see you there Ken, will get there on Saturday and am staying in Monroe (yes in a hotel, I am too much of a wimp to handle the rain and bugs in a tent). Am looking forward to that pork chop dinner. rick On Tue, Jul 16, 2013 at 7:42 PM, Ken Bickers wrote: > > Rick, this year I won't be able to make Brodhead. Hopefully we'll be able > to ooh and aah at each other's Piets next year at Brodhead. Best, Ken > > On Jul 16, 2013, at 4:03 PM, Rick wrote: > > > > > Very nice Ken. I am almost exactly at the same point. I spent today > taking everything off the fuselage, firewall forward, getting ready to > cover the fuselage. I have a friend that just built a large spray booth > to paint his Cherokee. The plastic he used was heavy gauge construction > polypropylene. It now sits in my T hangar ready to be attached to a frame. > Hopefully I will get it set up before Brodhead. > > > > See you in a few days! > > > > Rick Schreiber > > NX478RS > > > > > > > > Sent from my iPad > > > > On Jul 15, 2013, at 9:44 AM, Ken Bickers wrote: > > > >> Yesterday, I framed up a booth for doing some painting. Still some > work to go to brace it, enclose it, and fit it out with lights, etc. But > squirting paint is in the near future. Cheers, Ken > >> > > > > > > > > > > > > -- Rick Holland Castle Rock, Colorado NX6819Z ________________________________ Message 5 _____________________________________ Time: 11:01:06 AM PST US Subject: Pietenpol-List: Re: wood vs steel struts From: "womenfly2" ... or this: hydrographic wood grain -------- Read this topic online here: http://forums.matronics.com/viewtopic.php?p=404851#404851 ________________________________ Message 6 _____________________________________ Time: 11:27:31 AM PST US From: brian.e.jardine@l-3com.com Subject: Pietenpol-List: Room reservation for Brodhead Due to work again this year I won't be attending Brodhead. I do have a room reserved in Monroe at the AmericInn. I have till next Wednesday to cancel if anybody is interested in the 2 Queen room, free Breakfast, nice pool. Brian SLC-UT 385-315-0127 ________________________________ Message 7 _____________________________________ Time: 12:50:35 PM PST US Subject: Re: Pietenpol-List: Room reservation for Brodhead From: Marcus Zechini I aam interested. Camping fine if it isnt HOT! On Jul 17, 2013 2:30 PM, wrote: > > Due to work again this year I won't be attending Brodhead. I do have a > room reserved in Monroe at the AmericInn. I have till next Wednesday to > cancel if anybody is interested in the 2 Queen room, free Breakfast, > nice pool. > > Brian > SLC-UT > 385-315-0127 > > ________________________________ Message 8 _____________________________________ Time: 07:15:31 PM PST US Subject: Pietenpol-List: Model-A throttle response From: "BYD" Model-A drivers, does your engine stumble if you add throttle quickly? (Sounds like the beginning of an advertisement) My engine is being broken in and in the past it would quit if I closed the throttle quickly (friction) but Im at that magical point of 20 hours and thats gone, however, I still suffer from a bad stumble if I add power quickly. Anyone else work through this already? Thanks in advance. Read this topic online here: http://forums.matronics.com/viewtopic.php?p=404861#404861 ------------------------------------------------------------------------------------- Other Matronics Email List Services ------------------------------------------------------------------------------------- Post A New Message pietenpol-list@matronics.com UN/SUBSCRIBE http://www.matronics.com/subscription List FAQ http://www.matronics.com/FAQ/Pietenpol-List.htm Web Forum Interface To Lists http://forums.matronics.com Matronics List Wiki http://wiki.matronics.com Full Archive Search Engine http://www.matronics.com/search 7-Day List Browse http://www.matronics.com/browse/pietenpol-list Browse Digests http://www.matronics.com/digest/pietenpol-list Browse Other Lists http://www.matronics.com/browse Live Online Chat! http://www.matronics.com/chat Archive Downloading http://www.matronics.com/archives Photo Share http://www.matronics.com/photoshare Other Email Lists http://www.matronics.com/emaillists Contributions http://www.matronics.com/contribution ------------------------------------------------------------------------------------- These Email List Services are sponsored solely by Matronics and through the generous Contributions of its members.