---------------------------------------------------------- Pietenpol-List Digest Archive --- Total Messages Posted Fri 07/19/13: 19 ---------------------------------------------------------- Today's Message Index: ---------------------- 1. 03:12 AM - Re: Painting, step 1 (Jack Phillips) 2. 03:42 AM - Live Video Feed at Brodhead (Jack) 3. 04:39 AM - WX forecast for Chicago (Brodhead) (helspersew@aol.com) 4. 05:53 AM - Re: Live Video Feed at Brodhead (airlion2@gmail.com) 5. 06:09 AM - Re: Live Video Feed at Brodhead (Gary Boothe) 6. 06:14 AM - Re: Brat Fest III (Ralph) 7. 06:22 AM - Re: Painting, step 1 (Ken Bickers) 8. 06:33 AM - Live feed from Brodhead----this morning! (Cuy, Michael D. (GRC-RXD0)[Vantage Partners, LLC]) 9. 06:46 AM - Re: Painting, step 1 (l.morlock) 10. 07:21 AM - Re: Brat Fest III (dgaldrich) 11. 07:37 AM - Re: Brat Fest III (curtdm(at)gmail.com) 12. 08:33 AM - Re: Live feed from Brodhead----this morning! (echobravo4) 13. 09:00 AM - Re: Live feed from Brodhead----this morning! (Jack) 14. 09:50 AM - Re: Live feed from Brodhead----this morning! (Cuy, Michael D. (GRC-RXD0)[Vantage Partners, LLC]) 15. 09:50 AM - Re: Painting, step 1 (Barry Davis) 16. 09:58 AM - Re: Painting, step 1 (Ken Bickers) 17. 12:13 PM - Re: Painting, step 1 (Claude Corbett) 18. 03:39 PM - Re: if you helped with "RE-PIET"... (Pieti Lowell) 19. 05:51 PM - Re: Painting, step 1 (Dortch, Steven D MAJ MIL USA NGB) ________________________________ Message 1 _____________________________________ Time: 03:12:46 AM PST US From: "Jack Phillips" Subject: RE: Pietenpol-List: Painting, step 1 Something wrong here, Ken. Your shop looks way too neat. Jack Phillips NX899JP Smith Mountain Lake, Virginia _____ From: owner-pietenpol-list-server@matronics.com [mailto:owner-pietenpol-list-server@matronics.com] On Behalf Of Ken Bickers Sent: Monday, July 15, 2013 10:44 AM Subject: Pietenpol-List: Painting, step 1 Yesterday, I framed up a booth for doing some painting. Still some work to go to brace it, enclose it, and fit it out with lights, etc. But squirting paint is in the near future. Cheers, Ken ________________________________ Message 2 _____________________________________ Time: 03:42:39 AM PST US Subject: Pietenpol-List: Live Video Feed at Brodhead From: Jack Friends, Could anyone share advice on providing a feed from Brodhead. I know nothing about it like could it be run on my site www.textors.com? What is needed? I have cameras, wireless card, computer, etc... Sent from my iPad Jack Textor ________________________________ Message 3 _____________________________________ Time: 04:39:21 AM PST US Subject: Pietenpol-List: WX forecast for Chicago (Brodhead) From: helspersew@aol.com So far it looks like the easterly contingent might have to dodge a few stor ms, but a nice cool front is cleaning everything out for Thursday. http://www.chicagoweathercenter.com/forecast/ Dan Helsper Puryear, TN ________________________________ Message 4 _____________________________________ Time: 05:53:42 AM PST US Subject: Re: Pietenpol-List: Live Video Feed at Brodhead From: airlion2@gmail.com Also, is there a charging station set up? Gardiner Sent from my iPad On Jul 19, 2013, at 6:42 AM, Jack wrote: > > Friends, > Could anyone share advice on providing a feed from Brodhead. I know nothing about it like could it be run on my site www.textors.com? What is needed? I have cameras, wireless card, computer, etc... > > Sent from my iPad > Jack Textor > > > > ________________________________ Message 5 _____________________________________ Time: 06:09:45 AM PST US From: "Gary Boothe" Subject: RE: Pietenpol-List: Live Video Feed at Brodhead Lotta smart guys on this list, Jack, but you might try sending that question to Matt Dralle directly. Good idea! Gary Boothe NX308MB -----Original Message----- From: owner-pietenpol-list-server@matronics.com [mailto:owner-pietenpol-list-server@matronics.com] On Behalf Of Jack Sent: Friday, July 19, 2013 3:42 AM Subject: Pietenpol-List: Live Video Feed at Brodhead Friends, Could anyone share advice on providing a feed from Brodhead. I know nothing about it like could it be run on my site www.textors.com? What is needed? I have cameras, wireless card, computer, etc... Sent from my iPad Jack Textor ________________________________ Message 6 _____________________________________ Time: 06:14:56 AM PST US From: "Ralph" Subject: Re: Pietenpol-List: Brat Fest III Thanks for hosting the brat fest. Two from South Dakota plan on attending. Ralph ________________________________ Message 7 _____________________________________ Time: 06:22:24 AM PST US Subject: Re: Pietenpol-List: Painting, step 1 From: Ken Bickers Jack, not to worry. The camera was carefully pointed to avoid the messes. Here's the finished booth, ready for paint to be squirted later today. Cheers, Ken On Fri, Jul 19, 2013 at 4:11 AM, Jack Phillips wrote: > Something wrong here, Ken. Your shop looks way too neat.**** > > ** ** > > Jack Phillips**** > > NX899JP**** > > Smith Mountain Lake, Virginia**** > > ** ** > ------------------------------ > > *From:* owner-pietenpol-list-server@matronics.com [mailto: > owner-pietenpol-list-server@matronics.com] *On Behalf Of *Ken Bickers > *Sent:* Monday, July 15, 2013 10:44 AM > *To:* pietenpol-list@matronics.com > *Subject:* Pietenpol-List: Painting, step 1**** > > ** ** > > Yesterday, I framed up a booth for doing some painting. Still some work > to go to brace it, enclose it, and fit it out with lights, etc. But > squirting paint is in the near future. Cheers, Ken**** > > * > > > * > > ________________________________ Message 8 _____________________________________ Time: 06:33:54 AM PST US From: "Cuy, Michael D. (GRC-RXD0)[Vantage Partners, LLC]" Subject: Pietenpol-List: Live feed from Brodhead----this morning! Jack-here's the current image from the Bratcam that they have setup at the airport from Brodhead..... [cid:image001.png@01CE8463.0576E5F0] ________________________________ Message 9 _____________________________________ Time: 06:46:41 AM PST US From: "l.morlock" Subject: Re: Pietenpol-List: Painting, step 1 Ken, that looks similar to the one I made big enough for a one-piece wing. I hung mine from the rafters. Larry Morlock ----- Original Message ----- From: Ken Bickers To: pietenpol-list@matronics.com Sent: Friday, July 19, 2013 9:22 AM Subject: Re: Pietenpol-List: Painting, step 1 Jack, not to worry. The camera was carefully pointed to avoid the messes. Here's the finished booth, ready for paint to be squirted later today. Cheers, Ken On Fri, Jul 19, 2013 at 4:11 AM, Jack Phillips wrote: Something wrong here, Ken. Your shop looks way too neat. Jack Phillips NX899JP Smith Mountain Lake, Virginia ------------------------------------------------------------------------- --- From: owner-pietenpol-list-server@matronics.com [mailto:owner-pietenpol-list-server@matronics.com] On Behalf Of Ken Bickers Sent: Monday, July 15, 2013 10:44 AM To: pietenpol-list@matronics.com Subject: Pietenpol-List: Painting, step 1 Yesterday, I framed up a booth for doing some painting. Still some work to go to brace it, enclose it, and fit it out with lights, etc. But squirting paint is in the near future. Cheers, Ken " target="_blank">http://www.matronics.com/Navigator?Pietenpol-List tp://forums.matronics.com _blank">http://www.matronics.com/contribution ________________________________ Message 10 ____________________________________ Time: 07:21:11 AM PST US Subject: Pietenpol-List: Re: Brat Fest III From: "dgaldrich" Sue and I will be there. Looks like another good year at Brodhead. Dave Read this topic online here: http://forums.matronics.com/viewtopic.php?p=404934#404934 ________________________________ Message 11 ____________________________________ Time: 07:37:02 AM PST US Subject: Pietenpol-List: Re: Brat Fest III From: "curtdm(at)gmail.com" Thanks for the invite! I'll be there solo this year. -------- Curt Merdan Flower Mound, TX Read this topic online here: http://forums.matronics.com/viewtopic.php?p=404937#404937 ________________________________ Message 12 ____________________________________ Time: 08:33:04 AM PST US Subject: Pietenpol-List: Re: Live feed from Brodhead----this morning! From: "echobravo4" Nice! I heard there are going to be airplanes at Bratfest too! -------- Earl Brown I may not have gone where I intended to go, but I think I have ended up where I intended to be. Read this topic online here: http://forums.matronics.com/viewtopic.php?p=404938#404938 ________________________________ Message 13 ____________________________________ Time: 09:00:05 AM PST US Subject: Re: Pietenpol-List: Live feed from Brodhead----this morning! From: Jack What the heck is going on there today? Maybe the worlds largest but not the b est! :) Sent from my iPad Jack Textor On Jul 19, 2013, at 8:33 AM, "Cuy, Michael D. (GRC-RXD0)[Vantage Partners, L LC]" wrote: > > Jack=94here=99s the current image from the Bratcam that they h ave setup at the airport from Brodhead.. > > > > ________________________________ Message 14 ____________________________________ Time: 09:50:35 AM PST US From: "Cuy, Michael D. (GRC-RXD0)[Vantage Partners, LLC]" Subject: RE: Pietenpol-List: Live feed from Brodhead----this morning! W0Rlc2NyaXB0aW9uOiBCcm9kaGVhZCBBaXJwb3J0IChDMzcpIC0gQnJvZGhlYWQsIFdJXTxodHRw Oi8vd3d3LmFpcnBvcnQtZGF0YS5jb20vYWlycG9ydC9waG90by8wMDU0MTguaHRtbD4NCg0K ________________________________ Message 15 ____________________________________ Time: 09:50:35 AM PST US From: "Barry Davis" Subject: RE: Pietenpol-List: Painting, step 1 Ken It would be better to have your exhaust fan on the floor. The way it is, you are having the overspray climb up to the ceiling and cross the freshly painted parts. The trick is to let the overspray fall down near the floor (gravity) and let it exit the booth without being deposited on anything else except the floor (pulled up and across a wing will cause dry overspray). This also allows the air to move across the booth near the floor and not set up swirls and currents. In my paint booth for cars, the intake is in the ceiling and the exhaust fan is in the floor in the middle of the booth so the spray goes under the car and out. Always paint in the direction of from the intake to the exhaust to minimize overspray. Also be sure to stick a scrap piece of fabric (about 8"x8") over the back of the box fan in the center over the motor. This will keep most of the overspray out of the fan motor. In Harold's homebuilt Pietenpol Paint Booth, our first box fan lasted about a month without the fabric and the second lasted through painting 5 Pietenpols. My 2 cents Barry NX973BP From: owner-pietenpol-list-server@matronics.com [mailto:owner-pietenpol-list-server@matronics.com] On Behalf Of Ken Bickers Sent: Friday, July 19, 2013 9:22 AM Subject: Re: Pietenpol-List: Painting, step 1 Jack, not to worry. The camera was carefully pointed to avoid the messes. Here's the finished booth, ready for paint to be squirted later today. Cheers, Ken On Fri, Jul 19, 2013 at 4:11 AM, Jack Phillips wrote: Something wrong here, Ken. Your shop looks way too neat. Jack Phillips NX899JP Smith Mountain Lake, Virginia _____ From: owner-pietenpol-list-server@matronics.com [mailto:owner-pietenpol-list-server@matronics.com] On Behalf Of Ken Bickers Sent: Monday, July 15, 2013 10:44 AM Subject: Pietenpol-List: Painting, step 1 Yesterday, I framed up a booth for doing some painting. Still some work to go to brace it, enclose it, and fit it out with lights, etc. But squirting paint is in the near future. Cheers, Ken " target="_blank">http://www.matronics.com/Navigator?Pietenpol-List tp://forums.matronics.com _blank">http://www.matronics.com/contribution ________________________________ Message 16 ____________________________________ Time: 09:58:18 AM PST US Subject: Re: Pietenpol-List: Painting, step 1 From: Ken Bickers Barry, this is great advice and easily accommodated (I used slip fittings for the PVC that secure the fan and the two air filters). I hadn't thought about the pattern of overspray. Instead I was thinking about drawing in cooler air and exhausting warmer air. Cheers, Ken On Fri, Jul 19, 2013 at 10:50 AM, Barry Davis wrote: > Ken**** > > It would be better to have your exhaust fan on the floor. The way it is, > you are having the overspray climb up to the ceiling and cross the freshl y > painted parts. The trick is to let the overspray fall down near the floor > (gravity) and let it exit the booth without being deposited on anything > else except the floor (pulled up and across a wing will cause dry > overspray). This also allows the air to move across the booth near the > floor and not set up swirls and currents. In my paint booth for cars, th e > intake is in the ceiling and the exhaust fan is in the floor in the midd le > of the booth so the spray goes under the car and out. Always paint in the > direction of from the intake to the exhaust to minimize overspray.**** > > Also be sure to stick a scrap piece of fabric (about 8=94x8=94) over the back > of the box fan in the center over the motor. This will keep most of the > overspray out of the fan motor. In Harold=92s homebuilt Pietenpol Paint > Booth, our first box fan lasted about a month without the fabric and the > second lasted through painting 5 Pietenpols. **** > > My 2 cents**** > > Barry**** > > NX973BP**** > > ** ** > > *From:* owner-pietenpol-list-server@matronics.com [mailto: > owner-pietenpol-list-server@matronics.com] *On Behalf Of *Ken Bickers > > *Sent:* Friday, July 19, 2013 9:22 AM > *To:* pietenpol-list@matronics.com > > *Subject:* Re: Pietenpol-List: Painting, step 1**** > > ** ** > > Jack, not to worry. The camera was carefully pointed to avoid the messes .. > Here's the finished booth, ready for paint to be squirted later today. > Cheers, Ken**** > > ** ** > > On Fri, Jul 19, 2013 at 4:11 AM, Jack Phillips > wrote:**** > > Something wrong here, Ken. Your shop looks way too neat.**** > > **** > > Jack Phillips**** > > NX899JP**** > > Smith Mountain Lake, Virginia**** > > **** > ------------------------------ > > *From:* owner-pietenpol-list-server@matronics.com [mailto: > owner-pietenpol-list-server@matronics.com] *On Behalf Of *Ken Bickers > *Sent:* Monday, July 15, 2013 10:44 AM > *To:* pietenpol-list@matronics.com > *Subject:* Pietenpol-List: Painting, step 1**** > > **** > > Yesterday, I framed up a booth for doing some painting. Still some work > to go to brace it, enclose it, and fit it out with lights, etc. But > squirting paint is in the near future. Cheers, Ken**** > > * * > > * * > > *" target="_blank">http://www.matronics.com/Navigator?Pietenpol-List* > > * * > > *tp://forums.matronics.com* > > *_blank">http://www.matronics.com/contribution* > > * * > > ** ** > > * > =========== > =========== =========== =========== > > * > > ________________________________ Message 17 ____________________________________ Time: 12:13:11 PM PST US Subject: Re: Pietenpol-List: Painting, step 1 From: Claude Corbett Why not try putting hose with running watertocompleteycoverthefloor while.sp raying. Might save time and lungs CMC Sent from my iPad On Jul 19, 2013, at 11:50 AM, "Barry Davis" wrote: > Ken > It would be better to have your exhaust fan on the floor. The way it is, y ou are having the overspray climb up to the ceiling and cross the freshly pa inted parts. The trick is to let the overspray fall down near the floor (gra vity) and let it exit the booth without being deposited on anything else exc ept the floor (pulled up and across a wing will cause dry overspray). This a lso allows the air to move across the booth near the floor and not set up sw irls and currents. In my paint booth for cars, the intake is in the ceiling and the exhaust fan is in the floor in the middle of the booth so the spra y goes under the car and out. Always paint in the direction of from the inta ke to the exhaust to minimize overspray. > Also be sure to stick a scrap piece of fabric (about 8=9Dx8=9D ) over the back of the box fan in the center over the motor. This will keep m ost of the overspray out of the fan motor. In Harold=99s homebuilt Pie tenpol Paint Booth, our first box fan lasted about a month without the fabri c and the second lasted through painting 5 Pietenpols. > My 2 cents > Barry > NX973BP > > From: owner-pietenpol-list-server@matronics.com [mailto:owner-pietenpol-li st-server@matronics.com] On Behalf Of Ken Bickers > Sent: Friday, July 19, 2013 9:22 AM > To: pietenpol-list@matronics.com > Subject: Re: Pietenpol-List: Painting, step 1 > > Jack, not to worry. The camera was carefully pointed to avoid the messes. Here's the finished booth, ready for paint to be squirted later today. Chee rs, Ken > > > On Fri, Jul 19, 2013 at 4:11 AM, Jack Phillips w rote: > Something wrong here, Ken. Your shop looks way too neat. > > Jack Phillips > NX899JP > Smith Mountain Lake, Virginia > > From: owner-pietenpol-list-server@matronics.com [mailto:owner-pietenpol-li st-server@matronics.com] On Behalf Of Ken Bickers > Sent: Monday, July 15, 2013 10:44 AM > To: pietenpol-list@matronics.com > Subject: Pietenpol-List: Painting, step 1 > > Yesterday, I framed up a booth for doing some painting. Still some work t o go to brace it, enclose it, and fit it out with lights, etc. But squirtin g paint is in the near future. Cheers, Ken > > > " target="_blank">http://www.matronics.com/Navigator?Pietenpol-List > > tp://forums.matronics.com > _blank">http://www.matronics.com/contribution > > > > ========================== ========= ========================== ========= ========================== ========= ========================== ========= > ________________________________ Message 18 ____________________________________ Time: 03:39:02 PM PST US Subject: Pietenpol-List: Re: if you helped with "RE-PIET"... From: "Pieti Lowell" Douwe: Do I qualify ? I can spell inverted . Pieti Lowell Read this topic online here: http://forums.matronics.com/viewtopic.php?p=404958#404958 ________________________________ Message 19 ____________________________________ Time: 05:51:41 PM PST US From: "Dortch, Steven D MAJ MIL USA NGB" Subject: Re: Pietenpol-List: Painting, step 1 UNCLASSIFIED A buddy uses one of the canopy garages as the basis of his paint booth. On 07/19/13, Ken Bickers wrote: > Jack, not to worry. The camera was carefully pointed to avoid the messes. Here's the finished booth, ready for paint to be squirted later today. Cheers, Ken > > > On Fri, Jul 19, 2013 at 4:11 AM, Jack Phillips wrote: > > > > > Something wrong here, Ken. Your shop looks way too neat. > > > > > > > > Jack Phillips > > > > NX899JP > > > > Smith Mountain Lake, Virginia > > > > > > > > > > From: owner-pietenpol-list-server@matronics.com(blockedmailto:owner-pietenpol-list-server@matronics.com) [mailto:owner-pietenpol-list-server@matronics.com(blockedmailto:owner-pietenpol-list-server@matronics.com)] On Behalf Of Ken Bickers > > Sent: Monday, July 15, 2013 10:44 AM > > To: pietenpol-list@matronics.com(blockedmailto:pietenpol-list@matronics.com) > > Subject: Pietenpol-List: Painting, step 1 > > > > > > > > > > > > Yesterday, I framed up a booth for doing some painting. Still some work to go to brace it, enclose it, and fit it out with lights, etc. But squirting paint is in the near future. Cheers, Ken > > > > > > > > " target="_blank">http://www.matronics.com/Navigator?Pietenpol-List tp://forums.matronics.com _blank">http://www.matronics.com/contribution > > > > > > UNCLASSIFIED ------------------------------------------------------------------------------------- Other Matronics Email List Services ------------------------------------------------------------------------------------- Post A New Message pietenpol-list@matronics.com UN/SUBSCRIBE http://www.matronics.com/subscription List FAQ http://www.matronics.com/FAQ/Pietenpol-List.htm Web Forum Interface To Lists http://forums.matronics.com Matronics List Wiki http://wiki.matronics.com Full Archive Search Engine http://www.matronics.com/search 7-Day List Browse http://www.matronics.com/browse/pietenpol-list Browse Digests http://www.matronics.com/digest/pietenpol-list Browse Other Lists http://www.matronics.com/browse Live Online Chat! http://www.matronics.com/chat Archive Downloading http://www.matronics.com/archives Photo Share http://www.matronics.com/photoshare Other Email Lists http://www.matronics.com/emaillists Contributions http://www.matronics.com/contribution ------------------------------------------------------------------------------------- These Email List Services are sponsored solely by Matronics and through the generous Contributions of its members.