---------------------------------------------------------- Pietenpol-List Digest Archive --- Total Messages Posted Thu 07/25/13: 8 ---------------------------------------------------------- Today's Message Index: ---------------------- 1. 12:40 AM - WW first gear article (bubbleboy) 2. 04:57 AM - Re: Re: tires & tubes (Dortch, Steven D MAJ MIL USA NGB) 3. 10:28 AM - 7242 or -44 wood prop for taper shaft Cont. A-65 (woodflier@aol.com) 4. 10:40 AM - Re: 7242 or -44 wood prop for taper shaft Cont. A-65 (Ben Charvet) 5. 11:16 AM - Re: WW first gear article (Barry Davis) 6. 02:13 PM - Re: WW first gear article (bubbleboy) 7. 06:18 PM - Re: 7242 or -44 wood prop for taper shaft Cont. A-65 (Dan Yocum) 8. 06:46 PM - Re: 7242 or -44 wood prop for taper shaft Cont. A-65 (M. Zeke Zechini) ________________________________ Message 1 _____________________________________ Time: 12:40:07 AM PST US Subject: Pietenpol-List: WW first gear article From: "bubbleboy" Hi all...im about to start building my wood gear and I dont have the first article that WW and Ryan published in the magazine. I ordered my mag subscription at that time and the first mag I received started with the second article. Does anyone have a PDF copy of that mag or first article they could email to me please? I know I could email Mr Mosher but im sure he is in the throws of heading to the fly in. Scotty -------- Tamworth, Australia Building a Corvair Powered Pietenpol Air Camper www.scottyspietenpol.com Tail and Ribs built...Building fuselage & undercarriage...Corvair engine at Roy's Garage waiting to be modified. Read this topic online here: http://forums.matronics.com/viewtopic.php?p=405288#405288 ________________________________ Message 2 _____________________________________ Time: 04:57:05 AM PST US From: "Dortch, Steven D MAJ MIL USA NGB" Subject: Re: Pietenpol-List: Re: tires & tubes UNCLASSIFIED You Look Marvelous!. I wore out two sets with my old 150. Probably more of a reflection on my ability than on the tires. Then again that was over 600 hours of flying. Blue Skies, Steve D On 07/24/13, taildrags wrote: > > Steve; "clothes make the man- and with me, appearance is everything;o) I think I'm going to go for Aero Trainers again. I'm pretty hard on tires, so I'll stay cheap. I do like the look of plain, fat, ribbed tires on Scout. > > -------- > Oscar Zuniga > Medford, OR > Air Camper NX41CC "Scout" > A75 power > > > > > Read this topic online here: > > http://forums.matronics.com/viewtopic.php?p=405278#405278 > > > > > > > UNCLASSIFIED ________________________________ Message 3 _____________________________________ Time: 10:28:05 AM PST US From: woodflier@aol.com Subject: Pietenpol-List: 7242 or -44 wood prop for taper shaft Cont. A-65 Just checking the list to see if anyone has a prop for an A-65 to sell. Email me offline at woodflier@AOL.com. Matt Paxton Sent from my android device. ________________________________ Message 4 _____________________________________ Time: 10:40:33 AM PST US Subject: Re: Pietenpol-List: 7242 or -44 wood prop for taper shaft Cont. A-65 From: Ben Charvet Dont turn down a 72x40, thats what I have Sent from my iPhone On Jul 25, 2013, at 12:27 PM, woodflier@aol.com wrote: > Just checking the list to see if anyone has a prop for an A-65 to sell. Em ail me offline at woodflier@AOL.com. > > Matt Paxton > > Sent from my android device. > > ========================== ========= ========================== ========= ========================== ========= ========================== ========= > ________________________________ Message 5 _____________________________________ Time: 11:16:25 AM PST US From: "Barry Davis" Subject: RE: Pietenpol-List: WW first gear article What is the approx.. date of that magazine? Barry -----Original Message----- From: owner-pietenpol-list-server@matronics.com [mailto:owner-pietenpol-list-server@matronics.com] On Behalf Of bubbleboy Sent: Thursday, July 25, 2013 3:40 AM Subject: Pietenpol-List: WW first gear article --> Hi all...im about to start building my wood gear and I dont have the first article that WW and Ryan published in the magazine. I ordered my mag subscription at that time and the first mag I received started with the second article. Does anyone have a PDF copy of that mag or first article they could email to me please? I know I could email Mr Mosher but im sure he is in the throws of heading to the fly in. Scotty -------- Tamworth, Australia Building a Corvair Powered Pietenpol Air Camper www.scottyspietenpol.com Tail and Ribs built...Building fuselage & undercarriage...Corvair engine at Roy's Garage waiting to be modified. Read this topic online here: http://forums.matronics.com/viewtopic.php?p=405288#405288 ________________________________ Message 6 _____________________________________ Time: 02:13:10 PM PST US Subject: Pietenpol-List: Re: WW first gear article From: "bubbleboy" Hi Barry..looks like October 2010. Scotty -------- Tamworth, Australia Building a Corvair Powered Pietenpol Air Camper www.scottyspietenpol.com Tail and Ribs built...Building fuselage & undercarriage...Corvair engine at Roy's Garage waiting to be modified. Read this topic online here: http://forums.matronics.com/viewtopic.php?p=405313#405313 ________________________________ Message 7 _____________________________________ Time: 06:18:12 PM PST US From: Dan Yocum Subject: Re: Pietenpol-List: 7242 or -44 wood prop for taper shaft Cont. A-65 Matt, I got 88mph at 2350RPM out of the 7442 McCauley Met-L-Prop on N8031 - it was cut down to 72" though. Nice prop. Shined up real good, too. What happened to the Wille (Hegy?) prop you had/have? It wasn't about to win any beauty contests, but I thought you said it performed fine. Dan On 07/25/2013 12:40 PM, Ben Charvet wrote: > Dont turn down a 72x40, thats what I have > > Sent from my iPhone > > On Jul 25, 2013, at 12:27 PM, woodflier@aol.com > wrote: > >> Just checking the list to see if anyone has a prop for an A-65 to >> sell. Email me offline at woodflier @ >> AOL . >> com . >> >> Matt Paxton >> >> Sent from my android device. >> * >> >> >> * > * > > > * > ________________________________ Message 8 _____________________________________ Time: 06:46:52 PM PST US From: "M. Zeke Zechini" Subject: Re: Pietenpol-List: 7242 or -44 wood prop for taper shaft Cont. A-65 Matt: Hope to see you tomorrow at Brodhead! My GN-1 climbs great with McCauley metal 74x41, that was originally attached to A65. My Piet GN-1 now has C-85-12. Still swingin' the 41". I burn a lot and have to spin 2450 to keep up with Cub buddy. I plan on bending prop to 42-43. Will swap with Cub who has 72x42, and also a metal 74x42 from C-90 (PA-11). I am interested in what you find out. I need more pitch. Dan, see you at Brodhead? Zeke Sent from my iPad On Jul 25, 2013, at 9:17 PM, Dan Yocum wrote: > > Matt, > > I got 88mph at 2350RPM out of the 7442 McCauley Met-L-Prop on N8031 - it > was cut down to 72" though. Nice prop. Shined up real good, too. > > What happened to the Wille (Hegy?) prop you had/have? It wasn't about > to win any beauty contests, but I thought you said it performed fine. > > Dan > > On 07/25/2013 12:40 PM, Ben Charvet wrote: >> Dont turn down a 72x40, thats what I have >> >> Sent from my iPhone >> >> On Jul 25, 2013, at 12:27 PM, woodflier@aol.com >> wrote: >> >>> Just checking the list to see if anyone has a prop for an A-65 to >>> sell. Email me offline at woodflier @ >>> AOL . >>> com . >>> >>> Matt Paxton >>> >>> Sent from my android device. >>> * >>> >>> >>> * >> * >> >> >> * >> > > > > ------------------------------------------------------------------------------------- Other Matronics Email List Services ------------------------------------------------------------------------------------- Post A New Message pietenpol-list@matronics.com UN/SUBSCRIBE http://www.matronics.com/subscription List FAQ http://www.matronics.com/FAQ/Pietenpol-List.htm Web Forum Interface To Lists http://forums.matronics.com Matronics List Wiki http://wiki.matronics.com Full Archive Search Engine http://www.matronics.com/search 7-Day List Browse http://www.matronics.com/browse/pietenpol-list Browse Digests http://www.matronics.com/digest/pietenpol-list Browse Other Lists http://www.matronics.com/browse Live Online Chat! http://www.matronics.com/chat Archive Downloading http://www.matronics.com/archives Photo Share http://www.matronics.com/photoshare Other Email Lists http://www.matronics.com/emaillists Contributions http://www.matronics.com/contribution ------------------------------------------------------------------------------------- These Email List Services are sponsored solely by Matronics and through the generous Contributions of its members.