Today's Message Index:
----------------------
1. 05:43 AM - Re: ELT wanted (Jerry Dotson)
2. 06:46 AM - Re: For those of you who finished where did you start building? (Toddster)
3. 07:13 AM - Re: Re: For those of you who finished where did you start building? (Michael Perez)
4. 08:47 AM - Re: ELT wanted (AircamperN11MS)
5. 09:44 AM - Re: ELT wanted (Sanders, Andrew P)
6. 02:27 PM - Re: For those of you who finished where did you start building? (jammer)
7. 02:35 PM - Re: Re: ELT wanted (Chuck Campbell)
8. 03:05 PM - Re: Re: For those of you who finished where did you start building? (Rick Holland)
9. 03:07 PM - Re: Re: ELT wanted (Rick Holland)
10. 03:59 PM - NX626E (BYD)
11. 04:05 PM - Re: NX626E (taildrags)
12. 04:32 PM - Re: T.C. is back (Rick)
13. 05:00 PM - Re: NX626E (danhelsper@aol.com)
14. 05:43 PM - Re: NX626E (Jerry Dotson)
15. 07:10 PM - Re: NX626E (TriScout)
16. 08:28 PM - Re: NX626E (Greg Bacon)
17. 10:38 PM - Re: For those of you who finished where did you start building? (thavtoohey)
18. 11:16 PM - Re: For those of you who finished where did you start building? (jarheadpilot82)
19. 11:16 PM - Re: For those of you who finished where did you start building? (jarheadpilot82)
20. 11:16 PM - Re: For those of you who finished where did you start building? (jarheadpilot82)
Message 1
INDEX | Back to Main INDEX |
NEXT | Skip to NEXT Message |
LIST | Reply to LIST Regarding this Message |
SENDER | Reply to SENDER Regarding this Message |
|
Oscar,
I bought mine off Ebay for $50 with a year left on the battery. A new battery cost
me $24.95 from Spruce.
--------
Jerry Dotson
First flight June 16,2012
Flying in phase 2
Lycoming O-235 C2C
Jay Anderson CloudCars prop 76 X 44
do not archive
Read this topic online here:
http://forums.matronics.com/viewtopic.php?p=407097#407097
Message 2
INDEX | Back to Main INDEX |
PREVIOUS | Skip to PREVIOUS Message |
NEXT | Skip to NEXT Message |
LIST | Reply to LIST Regarding this Message |
SENDER | Reply to SENDER Regarding this Message |
|
Subject: | Re: For those of you who finished where did you start |
building?
If you don't mind me asking, where did you get the rough cut spruce?
Thanks,
Todd
Read this topic online here:
http://forums.matronics.com/viewtopic.php?p=407102#407102
Message 3
INDEX | Back to Main INDEX |
PREVIOUS | Skip to PREVIOUS Message |
NEXT | Skip to NEXT Message |
LIST | Reply to LIST Regarding this Message |
SENDER | Reply to SENDER Regarding this Message |
|
Subject: | Re: For those of you who finished where did you start |
building?
I bought most of mine from Public Lumber and some from McCormick Lumber.-
It appears both websites have changed are are now not as user friendly as
they were when I used them. I would imagine a phone call will get you what
you are after.=0A-=0AAt the time, I was able to pick and choose widths an
d thickness along with length. I believe I bought 1" X 8" X 6' and made all
my capstrip for the ribs. As time went on I bought various sizes-to cut
up-what was needed for the current stage of building.- Shipping was not
too bad, otherwise I would have tried something else. (all UPS or FedEx.)
- =0A-=0AIt is also nice to cut your own because you can get the most o
ut of the stock...if you plan well prior to cutting.=0A-=0A-=0A=0AMicha
el Perez=0APietenpol HINT Videos=0AKaretaker Aero=0Awww.karetakeraero.com
=0A=0A=0A>
Message 4
INDEX | Back to Main INDEX |
PREVIOUS | Skip to PREVIOUS Message |
NEXT | Skip to NEXT Message |
LIST | Reply to LIST Regarding this Message |
SENDER | Reply to SENDER Regarding this Message |
|
Oscar,
Are there any aircraft salvage yards near you? You could get a previously enjoyed
or tested one from a place like that. A lot of airplanes get salvaged that
haven't had severe accidents. Ground loops come to mind. Perhaps Wentworth
aircraft or someone near you will have one. Just get in touch with our friend
"Google". He can help you out.
Good luck,
--------
Scott Liefeld
Flying N11MS since March 1972
Steel Tube
C-85-12
Wire Wheels
Brodhead in 1996
Read this topic online here:
http://forums.matronics.com/viewtopic.php?p=407114#407114
Message 5
INDEX | Back to Main INDEX |
PREVIOUS | Skip to PREVIOUS Message |
NEXT | Skip to NEXT Message |
LIST | Reply to LIST Regarding this Message |
SENDER | Reply to SENDER Regarding this Message |
|
Oscar:
I have a spare Narco ELT-10 that you are welcome to for the price of shippi
ng.
If that is acceptable to you, send me your "Snail Mail" address off list.
I will be at the hangar this weekend and will dig it out then.
Also, would you like it "heavy" (with a recently expired battery) or "light
" (without).
Regards,
Andrew
C-177 "Cardinal"
N2206Y w/180 hp & CS.
Time: 12:03:09 PM PST US
From: Oscar Zuniga <taildrags@hotmail.com<mailto:taildrags@hotmail.co
m>>
Subject: Pietenpol-List: ELT wanted
Inspecting my Narco ELT-10 for annual=2C I find that the battery ha
s create
d corrosion that has damaged the printed circuit board and battery co
nnecto
r=2C so it's now junk. I do not want to spend the money on a "real
" 406 MH
z ELT so I'm looking for an old standard 121.5 MHz ELT like my Narco
or the
thousands of other yellow and orange ELTs that used to be in every C
essna
and Piper out there. If someone has one they would like to sell or i
f they
can refer me to a shop or individual that may have one=2C let me k
now (off
line).
Oscar Zuniga
Air Camper NX41CC "Scout"
Medford=2C OR
Message 6
INDEX | Back to Main INDEX |
PREVIOUS | Skip to PREVIOUS Message |
NEXT | Skip to NEXT Message |
LIST | Reply to LIST Regarding this Message |
SENDER | Reply to SENDER Regarding this Message |
|
Subject: | Re: For those of you who finished where did you start |
building?
I started building in a winter month also. I did all the metal fittings and assemblies
first so I didn't have to worry about my cold basement causing problems
with glue setting up. I only had to heat a very small space to get them all
cut out and welded up. When it warmed up I started in on other smaller stuff
like rudders, elevators, wing ribs and whatever I could store in my garage.
Read this topic online here:
http://forums.matronics.com/viewtopic.php?p=407127#407127
Message 7
INDEX | Back to Main INDEX |
PREVIOUS | Skip to PREVIOUS Message |
NEXT | Skip to NEXT Message |
LIST | Reply to LIST Regarding this Message |
SENDER | Reply to SENDER Regarding this Message |
|
Andrew=2C if Oscar doesn't want it I will take it. My Piet is not as far a
long as his but I will need an ELT eventually. If Oscar doesn't want it=2C
send it "light" to:
CN Campbelll=2C 604 Cordova Court=2C Salisbury=2C NC 28146.
Don't know how you want to handle the shipping expenses. If you send it pr
epaid=2C I will reimburse you. Thanks=2C Chuck
From: andrew.p.sanders@boeing.com
Subject: Pietenpol-List: Re: ELT wanted
=0A
=0A
=0A
=0A
=0A
=0A
=0A
=0A
=0A
Oscar:=0A
=0A
I have a spare Narco ELT-10 that you are welcome to for the price of shippi
ng.=0A
=0A
If that is acceptable to you=2C send me your =93Snail Mail=94 address off l
ist. I will be at the hangar this weekend and will dig it out then.=0A
=0A
Also=2C would you like it =93heavy=94 (with a recently expired battery) or
=93light=94 (without).=0A
=0A
Regards=2C=0A
Andrew=0A
=0A
C-177 =93Cardinal=94=0A
N2206Y w/180 hp & CS.=0A
=0A
Time: 12:03:09 PM PST US=0A
From: Oscar Zuniga <taildrags@hotmail.com>=0A
Subject: Pietenpol-List: ELT wanted=0A
=0A
Inspecting my Narco ELT-10 for annual=2C I find that the battery has crea
te=0A
d corrosion that has damaged the printed circuit board and battery connecto
=0A
r=2C so it's now junk. I do not want to spend the money on a "real" 406
MH=0A
z ELT so I'm looking for an old standard 121.5 MHz ELT like my Narco or the
=0A
thousands of other yellow and orange ELTs that used to be in every Cessna
=0A
and Piper out there. If someone has one they would like to sell or if they
=0A
can refer me to a shop or individual that may have one=2C let me know (o
ff=0A
line).=0A
=0A
=0A
Oscar Zuniga=0A
=0A
Air Camper NX41CC "Scout"=0A
=0A
Medford=2C OR =0A
=0A
=0A
=0A
=0A
=0A
=0A
=0A
=0A
=0A
============0A
============0A
============0A
============0A
=0A
Message 8
INDEX | Back to Main INDEX |
PREVIOUS | Skip to PREVIOUS Message |
NEXT | Skip to NEXT Message |
LIST | Reply to LIST Regarding this Message |
SENDER | Reply to SENDER Regarding this Message |
|
Subject: | Re: For those of you who finished where did you start |
building?
I still have several fittings that I made in advance hanging above my
workbench that I had to remake after finding the finished sizes of many
glued/welded parts were different than plans. Wife wants me to make
windchimes out of them. Would wait on making fittings until you need them
to hold something together.
rh
On Tue, Aug 20, 2013 at 3:26 PM, jammer <nokkj@yahoo.com> wrote:
>
> I started building in a winter month also. I did all the metal fittings
> and assemblies first so I didn't have to worry about my cold basement
> causing problems with glue setting up. I only had to heat a very small
> space to get them all cut out and welded up. When it warmed up I started
> in on other smaller stuff like rudders, elevators, wing ribs and whatever I
> could store in my garage.
>
>
> Read this topic online here:
>
> http://forums.matronics.com/viewtopic.php?p=407127#407127
>
>
--
Rick Holland
Castle Rock, Colorado
NX6819Z
Message 9
INDEX | Back to Main INDEX |
PREVIOUS | Skip to PREVIOUS Message |
NEXT | Skip to NEXT Message |
LIST | Reply to LIST Regarding this Message |
SENDER | Reply to SENDER Regarding this Message |
|
btw - just finished my airworthiness last Saturday and yes the DAR did ask
to see my ELT. Didn't care if it worked or even had batteries in it. I got
it off ebay for $19 + $50 shipping, from Aukland NZ.
rh
On Tue, Aug 20, 2013 at 3:34 PM, Chuck Campbell <cncampbell@outlook.com>wro
te:
> Andrew, if Oscar doesn't want it I will take it. My Piet is not as far
> along as his but I will need an ELT eventually. If Oscar doesn't want it
,
> send it "light" to:
> CN Campbelll, 604 Cordova Court, Salisbury, NC 28146.
>
> Don't know how you want to handle the shipping expenses. If you send it
> prepaid, I will reimburse you. Thanks, Chuck
> ------------------------------
> From: andrew.p.sanders@boeing.com
> To: taildrags@hotmail.com
> Subject: Pietenpol-List: Re: ELT wanted
> Date: Tue, 20 Aug 2013 16:43:42 +0000
>
> Oscar:
>
> I have a spare Narco ELT-10 that you are welcome to for the price of
> shipping.
>
> If that is acceptable to you, send me your =93Snail Mail=94 address off l
ist.
> I will be at the hangar this weekend and will dig it out then.
>
> Also, would you like it =93heavy=94 (with a recently expired battery) or
> =93light=94 (without).
>
> Regards,
> Andrew
>
> C-177 =93Cardinal=94
> N2206Y w/180 hp & CS.
>
> Time: 12:03:09 PM PST US
> From: Oscar Zuniga <*taildrags@hotmail.com* <taildrags@hotmail.com>>
> Subject: Pietenpol-List: ELT wanted
>
> Inspecting my Narco ELT-10 for annual=2C I find that the battery has cr
eate
> d corrosion that has damaged the printed circuit board and battery connec
to
> r=2C so it's now junk. I do not want to spend the money on a "real" 40
6 MH
> z ELT so I'm looking for an old standard 121.5 MHz ELT like my Narco or t
he
> thousands of other yellow and orange ELTs that used to be in every Cessn
a
> and Piper out there. If someone has one they would like to sell or if th
ey
> can refer me to a shop or individual that may have one=2C let me know
(off
> line).
>
>
> Oscar Zuniga
>
> Air Camper NX41CC "Scout"
>
> Medford=2C OR
>
>
> *
>
> ==========
> st" target="_blank">http://www.matronics.com/Navigator?Pietenpol-List
> ===========http://forums.matronics.com
> ==========
> ="_blank">http://www.matronics.com/contribution
> ==========
> *
>
> *
>
===========
===========
===========
===========
> *
>
>
--
Rick Holland
Castle Rock, Colorado
NX6819Z
Message 10
INDEX | Back to Main INDEX |
PREVIOUS | Skip to PREVIOUS Message |
NEXT | Skip to NEXT Message |
LIST | Reply to LIST Regarding this Message |
SENDER | Reply to SENDER Regarding this Message |
|
Hello good people!
You better all grab your courage everybody because this is flying weather. Now
Im talking about the best 20 minutes of your life.
When you die and St. Peter asks you, Hey, when were you happiest down there? Youre
gonna say well, it was okay the day that I got married and I didnt much
mind the day I first fell in love but seeing the sky in my own Pietenpol Air
Camper that I built myself well sir that beats them all.
NX626E flew for the first time August 20th, 2013
(Video proof forthcoming)
Read this topic online here:
http://forums.matronics.com/viewtopic.php?p=407132#407132
Message 11
INDEX | Back to Main INDEX |
PREVIOUS | Skip to PREVIOUS Message |
NEXT | Skip to NEXT Message |
LIST | Reply to LIST Regarding this Message |
SENDER | Reply to SENDER Regarding this Message |
|
Whoa-! That is the best news I've heard all day! Congratulations on a successful
first flight, but you'll need to post a lot more detail than that!
"Experimental Two-Six Echo, low pass and victory roll approved; cleared to land!"
--------
Oscar Zuniga
Medford, OR
Air Camper NX41CC "Scout"
A75 power
Read this topic online here:
http://forums.matronics.com/viewtopic.php?p=407133#407133
Message 12
INDEX | Back to Main INDEX |
PREVIOUS | Skip to PREVIOUS Message |
NEXT | Skip to NEXT Message |
LIST | Reply to LIST Regarding this Message |
SENDER | Reply to SENDER Regarding this Message |
|
Subject: | Re: T.C. is back |
Larry,
I hope to be at both Blakesburg and Brodhead this year.
Rick Schreiber
Valparaiso, in
Sent from my iPad
On Aug 19, 2013, at 8:27 AM, Lawrence Williams <lnawms@yahoo.com> wrote:
> Mr. Helsper et al,
>
> It is true, I Larry Williams (aka. Top Curmudgeon) have returned to active
ly scanning the daily digest ;ever vigilant for some poor soul who inadverte
ntly posts a question that has been answered 500 times in the past 6 months o
r asks something so off-base that his ability to build a true flying machine
is doubtful. (for those....well, we banish them to Belize!)
>
> As I have been on sabbatical, I have come closer to being "one with the sk
y" and have therefore gained a sense of clarity, charity and compassion. As a
result, the fiery barbs from my keyboard will likely be much more infrequen
t and less harsh than what was the norm in days gone by. Not by any means ni
ce, just gentler............maybe.
>
> Larry (TC) Williams
>
> ps. Trying to get to Blakesburg, IA and Brodhead for the antique/grass roo
ts fly-ins in the next couple of weeks. Anyone else???
>
>
==========================
=========
==========================
=========
==========================
=========
==========================
=========
>
Message 13
INDEX | Back to Main INDEX |
PREVIOUS | Skip to PREVIOUS Message |
NEXT | Skip to NEXT Message |
LIST | Reply to LIST Regarding this Message |
SENDER | Reply to SENDER Regarding this Message |
|
Congratulations Bill!! Can't wait to see the vid!!
Dan Helsper
Puryear, TN
-----Original Message-----
From: BYD <billsayre@ymail.com>
Sent: Tue, Aug 20, 2013 6:00 pm
Subject: Pietenpol-List: NX626E
Hello good people!
You better all grab your courage everybody because this is flying weather.
Now
I=C3=A2=C2=C2=99m talking about the best 20 minutes of your life.
When you die and St. Peter asks you, =C3=A2=C2=C2=9CHey, when were you h
appiest down
there?=C3=A2=C2=C2=9D You=C3=A2=C2=C2=99re gonna say =C3=A2=C2=C2
=93 well, it was okay the day that I got married
=C3=A2=C2=C2=93 and I didn=C3=A2=C2=C2=99t much mind the day I first
fell in love =C3=A2=C2=C2=93 but seeing the sky
in my own Pietenpol Air Camper that I built myself =C3=A2=C2=C2=93 well
sir =C3=A2=C2=C2=93 that beats
them all.
NX626E flew for the first time August 20th, 2013
(Video proof forthcoming)
Read this topic online here:
http://forums.matronics.com/viewtopic.php?p=407132#407132
Message 14
INDEX | Back to Main INDEX |
PREVIOUS | Skip to PREVIOUS Message |
NEXT | Skip to NEXT Message |
LIST | Reply to LIST Regarding this Message |
SENDER | Reply to SENDER Regarding this Message |
|
I know just how you feel and it is great!
Congratulations
--------
Jerry Dotson
First flight June 16,2012
Flying in phase 2
Lycoming O-235 C2C
Jay Anderson CloudCars prop 76 X 44
do not archive
Read this topic online here:
http://forums.matronics.com/viewtopic.php?p=407136#407136
Message 15
INDEX | Back to Main INDEX |
PREVIOUS | Skip to PREVIOUS Message |
NEXT | Skip to NEXT Message |
LIST | Reply to LIST Regarding this Message |
SENDER | Reply to SENDER Regarding this Message |
|
I fly a GN-1 constructed by someone else, but now you're making me want to build
a Piet... Congratz!
--------
L.Metzel
KLNC
A65-8
N2308C
AN Hardware
Airframe 712TT
W72CK-42 Sensenich
Standard Factory GN-1
Read this topic online here:
http://forums.matronics.com/viewtopic.php?p=407138#407138
Message 16
INDEX | Back to Main INDEX |
PREVIOUS | Skip to PREVIOUS Message |
NEXT | Skip to NEXT Message |
LIST | Reply to LIST Regarding this Message |
SENDER | Reply to SENDER Regarding this Message |
|
Congratulations Bill!! Glad to hear of your success.
On Tue, Aug 20, 2013 at 5:59 PM, BYD <billsayre@ymail.com> wrote:
>
> Hello good people!
>
> You better all grab your courage everybody because this is flying weather
.
> Now I=92m talking about the best 20 minutes of your life.
>
> When you die and St. Peter asks you, =93Hey, when were you happiest down
> there?=94 You=92re gonna say ' well, it was okay the day that I got mar
ried '
> and I didn=92t much mind the day I first fell in love ' but seeing the
sky in
> my own Pietenpol Air Camper that I built myself ' well sir ' that bea
ts
> them all.
>
> NX626E flew for the first time August 20th, 2013
> (Video proof forthcoming)
>
>
> Read this topic online here:
>
> http://forums.matronics.com/viewtopic.php?p=407132#407132
>
>
===========
===========
===========
===========
>
>
--
Greg Bacon
Prairie Home, MO
NX114D(Mountain Piet)
Message 17
INDEX | Back to Main INDEX |
PREVIOUS | Skip to PREVIOUS Message |
NEXT | Skip to NEXT Message |
LIST | Reply to LIST Regarding this Message |
SENDER | Reply to SENDER Regarding this Message |
|
Subject: | Re: For those of you who finished where did you start |
building?
I have an experience to share with you guys. Once I was in a remote place, my signal in my phone got jammed, i thought the problem would be with my service provider. After coming back home i gave black and blues to my customer care highlighting my issue. They pleaded me saying that the problem is not with them. Then i browsed through the search engine regarding my issue, i got a remedy for my cell phone, there i came to know the problem called signal jamming that is experienced in most cell phones. They have a product called cell phone jammer (http://www.jammerall.com/categories/Cell-Phone-Jammers/) could be very useful to get rid of these problems. Check out the details here cell phone jammer and hope this information would be beneficial. Hope that u would pass this information to all your friends, so that they too would benefited, Stay safe, Cheers
Read this topic online here:
http://forums.matronics.com/viewtopic.php?p=407143#407143
Message 18
INDEX | Back to Main INDEX |
PREVIOUS | Skip to PREVIOUS Message |
NEXT | Skip to NEXT Message |
LIST | Reply to LIST Regarding this Message |
SENDER | Reply to SENDER Regarding this Message |
|
Subject: | Re: For those of you who finished where did you start |
building?
Folks,
I have emailed Matt Dralle about this most recent post. Apparently the scammers
and sellers have descended on this forum. I though Matt would want to know. Hopefully,
he can block this guy, so we don't have to put up with these type posts.
--------
Semper Fi,
Terry Hand
Athens, GA
Read this topic online here:
http://forums.matronics.com/viewtopic.php?p=407146#407146
Message 19
INDEX | Back to Main INDEX |
PREVIOUS | Skip to PREVIOUS Message |
NEXT | Skip to NEXT Message |
LIST | Reply to LIST Regarding this Message |
SENDER | Reply to SENDER Regarding this Message |
|
Subject: | Re: For those of you who finished where did you start |
building?
Folks,
I have emailed Matt Dralle about this most recent post. Apparently the scammers
and sellers have descended on this forum. I though Matt would want to know. Hopefully,
he can block this guy, so we don't have to put up with these type posts.
--------
Semper Fi,
Terry Hand
Athens, GA
Read this topic online here:
http://forums.matronics.com/viewtopic.php?p=407147#407147
Message 20
INDEX | Back to Main INDEX |
PREVIOUS | Skip to PREVIOUS Message |
NEXT | Skip to NEXT Message |
LIST | Reply to LIST Regarding this Message |
SENDER | Reply to SENDER Regarding this Message |
|
Subject: | Re: For those of you who finished where did you start |
building?
Folks,
I have emailed Matt Dralle about this most recent post. Apparently the scammers
and sellers have descended on this forum. I though Matt would want to know. Hopefully,
he can block this guy, so we don't have to put up with these type posts.
--------
Semper Fi,
Terry Hand
Athens, GA
Read this topic online here:
http://forums.matronics.com/viewtopic.php?p=407145#407145
Other Matronics Email List Services
These Email List Services are sponsored solely by Matronics and through the generous Contributions of its members.
-- Please support this service by making your Contribution today! --
|