Pietenpol-List Digest Sat 11/02/13

Pietenpol-List Digest Archive

Sat 11/02/13

Total Messages Posted: 17



Today's Message Index:
----------------------
 
     1. 03:37 AM - Re: NX308MB Finally Up Again!! (Jack)
     2. 04:15 AM - Re: NX308MB Finally Up Again!! (Jack Phillips)
     3. 04:23 AM - Re: NX308MB Finally Up Again!! (Gary Boothe)
     4. 04:55 AM - Re: NX308MB Finally Up Again!! (Michael Groah)
     5. 04:58 AM - Re: NX308MB Finally Up Again!! (Gary Boothe)
     6. 05:30 AM - Re: NX308MB Finally Up Again!! (danhelsper@aol.com)
     7. 05:58 AM - Re: NX308MB Finally Up Again!! (John Francis)
     8. 06:08 AM - Re: Re: NX308MB Finally Up Again!! (Gary Boothe)
     9. 06:16 AM - gary's rebuild (Douwe Blumberg)
    10. 06:27 AM - Re: gary's rebuild (Gary Boothe)
    11. 07:12 AM - Re: NX308MB Finally Up Again!! (l.morlock)
    12. 08:02 AM - Re: NX308MB Finally Up Again!! (echobravo4)
    13. 03:13 PM - Re: NX308MB Finally Up Again!! (Bill Church)
    14. 06:14 PM - Re: NX308MB Finally Up Again!! (taildrags)
    15. 06:17 PM - Regarding the Contrex sensor... (John Franklin)
    16. 06:37 PM - Re: Re: NX308MB Finally Up Again!! (Gary Boothe)
    17. 07:43 PM - Re: NX308MB Finally Up Again!! (Steven Dortch)
 
 
 

Message 1


					INDEX  Back to Main INDEX
					NEXT  Skip to NEXT Message
	LIST  Reply to LIST Regarding this Message
		SENDER  Reply to SENDER Regarding this Message

      
      
Time: 03:37:12 AM PST US
Subject: Re: NX308MB Finally Up Again!!
From: Jack <jack@textors.com>      
      Congratulations Gary!
      
      Sent from my iPad
      Jack Textor
      
      On Nov 1, 2013, at 11:18 PM, "Gary Boothe" <gboothe5@comcast.net> wrote:
      
      > http://www.youtube.com/watch?v=3ziFp2viX1M&feature=youtu.be
      >  
      > Gary Boothe
      > NX308MB
      >  
      > 
      > 
      

Message 2


					INDEX  Back to Main INDEX
				PREVIOUS  Skip to PREVIOUS Message
					NEXT  Skip to NEXT Message
	LIST  Reply to LIST Regarding this Message
		SENDER  Reply to SENDER Regarding this Message

      
      
Time: 04:15:25 AM PST US
From: "Jack Phillips" <jack@bedfordlandings.com>
Subject: NX308MB Finally Up Again!!      
      Way to go, Gary!  You have persevered twice now, and can finally really
      begin to enjoy your new ship.
      
      
      Jack Phillips
      
      NX899JP
      
      Smith Mountain Lake, Virginia
      
      
        _____  
      
      From: owner-pietenpol-list-server@matronics.com
      [mailto:owner-pietenpol-list-server@matronics.com] On Behalf Of Gary Boothe
      Sent: Saturday, November 02, 2013 12:19 AM
      Subject: Pietenpol-List: NX308MB Finally Up Again!!
      
      
      http://www.youtube.com/watch?v=3ziFp2viX1M
      <http://www.youtube.com/watch?v=3ziFp2viX1M&feature=youtu.be>
      &feature=youtu.be
      
      
      Gary Boothe
      
      NX308MB
      
      

Message 3


					INDEX  Back to Main INDEX
				PREVIOUS  Skip to PREVIOUS Message
					NEXT  Skip to NEXT Message
	LIST  Reply to LIST Regarding this Message
		SENDER  Reply to SENDER Regarding this Message

      
      
Time: 04:23:07 AM PST US
From: "Gary Boothe" <gboothe5@comcast.net>
Subject: NX308MB Finally Up Again!!      
      Rick,
      
      
      I have nothing bad to say about the A-frame tail wheel gear that Mr. 
      Pietenpol designed, the problem was with my cable rigging. Since I had 
      decided to use return springs in the cockpit, I had no way of tightening 
      the cables to the tail wheel. Landings wereunpredictable. The 
      new setup is with a spring that extends the tail wheel back far enough 
      to link to the rudder with a rudder horn. Using a Matco tail wheel.
      
      
      Gary Boothe
      
      NX308MB
      
      
      From: owner-pietenpol-list-server@matronics.com 
      [mailto:owner-pietenpol-list-server@matronics.com] On Behalf Of Rick
      Sent: Friday, November 01, 2013 10:07 PM
      Subject: Re: Pietenpol-List: NX308MB Finally Up Again!!
      
      
      Way to go Gary! I'm sure it took a lot of intestinal fortitude to have 
      to rebuild. What changes did you make to your tail wheel design?
      
      
      Rick Schreiber
      
      
      Sent from my iPad
      
      
      On Nov 1, 2013, at 11:18 PM, "Gary Boothe" <gboothe5@comcast.net> wrote:
      
      http://www.youtube.com/watch?v=3ziFp2viX1M 
      <http://www.youtube.com/watch?v=3ziFp2viX1M&feature=youtu.be> 
      &feature=youtu.be
      
      
      Gary Boothe
      
      NX308MB
      
      
      3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=
      3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=
      3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=
      3D
      3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=
      3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=
      3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=
      3D
      3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=
      3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=
      3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=
      3D
      3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=
      3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=
      3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=
      3D
      

Message 4


					INDEX  Back to Main INDEX
				PREVIOUS  Skip to PREVIOUS Message
					NEXT  Skip to NEXT Message
	LIST  Reply to LIST Regarding this Message
		SENDER  Reply to SENDER Regarding this Message

      
      
Time: 04:55:27 AM PST US
Subject: Re: NX308MB Finally Up Again!!
From: Michael Groah <dskogrover@yahoo.com>      
      Congrats Gary.   It's great to see it in the air and know that you can start
       to enjoy using it again.
      
      Mike Groah
      
      
      Sent from my iPad
      
      > On Nov 2, 2013, at 4:22 AM, "Gary Boothe" <gboothe5@comcast.net> wrote:
      > 
      > Rick,
      >  
      > I have nothing bad to say about the A-frame tail wheel gear that Mr. Piete
      npol designed, the problem was with my cable rigging. Since I had decided to
       use return springs in the cockpit, I had no way of tightening the cables to
       the tail wheel. Landings wereunpredictable. The new setup is with a
       spring that extends the tail wheel back far enough to link to the rudder wi
      th a rudder horn. Using a Matco tail wheel.
      >  
      > Gary Boothe
      > NX308MB
      >  
      > From: owner-pietenpol-list-server@matronics.com [mailto:owner-pietenpol-li
      st-server@matronics.com] On Behalf Of Rick
      > Sent: Friday, November 01, 2013 10:07 PM
      > To: pietenpol-list@matronics.com
      > Subject: Re: Pietenpol-List: NX308MB Finally Up Again!!
      >  
      > Way to go Gary! I'm sure it took a lot of intestinal fortitude to have to r
      ebuild. What changes did you make to your tail wheel design?
      >  
      > Rick Schreiber
      >  
      > 
      > 
      > Sent from my iPad
      > 
      > On Nov 1, 2013, at 11:18 PM, "Gary Boothe" <gboothe5@comcast.net> wrote:
      > 
      > http://www.youtube.com/watch?v=3ziFp2viX1M&feature=youtu.be
      >  
      > Gary Boothe
      > NX308MB
      >  
      >  
      >  
      >  
      >  
      > www.aeroelectric.com
      > www.buildersbooks.com
      > www.homebuilthelp.com
      > www.mypilotstore.com
      > www.mrrace.com
      > http://www.matronics.com/contribution
      > http://www.matronics.com/Navigator?Pietenpol-List
      > http://forums.matronics.com
      > 
      > 
      3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3
      D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D
      =3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D
      3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3
      D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D
      =3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D
      3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3
      D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D
      =3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D
      3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3
      D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D
      =3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D
      

Message 5


					INDEX  Back to Main INDEX
				PREVIOUS  Skip to PREVIOUS Message
					NEXT  Skip to NEXT Message
	LIST  Reply to LIST Regarding this Message
		SENDER  Reply to SENDER Regarding this Message

      
      
Time: 04:58:22 AM PST US
From: "Gary Boothe" <gboothe5@comcast.net>
Subject: NX308MB Finally Up Again!!      
      Still a bit hot, Mike. About 380.
      
      
      From: owner-pietenpol-list-server@matronics.com 
      [mailto:owner-pietenpol-list-server@matronics.com] On Behalf Of Michael 
      Groah
      Sent: Saturday, November 02, 2013 4:55 AM
      Subject: Re: Pietenpol-List: NX308MB Finally Up Again!!
      
      
      Congrats Gary.   It's great to see it in the air and know that you can 
      start to enjoy using it again.
      
      
      Mike Groah
      
      
      Sent from my iPad
      
      
      On Nov 2, 2013, at 4:22 AM, "Gary Boothe" <gboothe5@comcast.net> wrote:
      
      Rick,
      
      
      I have nothing bad to say about the A-frame tail wheel gear that Mr. 
      Pietenpol designed, the problem was with my cable rigging. Since I had 
      decided to use return springs in the cockpit, I had no way of tightening 
      the cables to the tail wheel. Landings wereunpredictable. The 
      new setup is with a spring that extends the tail wheel back far enough 
      to link to the rudder with a rudder horn. Using a Matco tail wheel.
      
      
      Gary Boothe
      
      NX308MB
      
      
      From: owner-pietenpol-list-server@matronics.com 
      [mailto:owner-pietenpol-list-server@matronics.com] On Behalf Of Rick
      Sent: Friday, November 01, 2013 10:07 PM
      Subject: Re: Pietenpol-List: NX308MB Finally Up Again!!
      
      
      Way to go Gary! I'm sure it took a lot of intestinal fortitude to have 
      to rebuild. What changes did you make to your tail wheel design?
      
      
      Rick Schreiber
      
      
      Sent from my iPad
      
      
      On Nov 1, 2013, at 11:18 PM, "Gary Boothe" <gboothe5@comcast.net> wrote:
      
      http://www.youtube.com/watch?v=3ziFp2viX1M 
      <http://www.youtube.com/watch?v=3ziFp2viX1M&feature=youtu.be> 
      &feature=youtu.be
      
      
      Gary Boothe
      
      NX308MB
      
      
      <="" span="">
      <="" span="">
      www.aeroelectric.com
      www.buildersbooks.com
      www.homebuilthelp.com
      www.mypilotstore.com
      www.mrrace.com
      <="" span="">
      <="" span="">
      http://www.matronics.com/contribution
      <="" span="">
      <="" span="">
      <="" span="">
      <="" span="">
      http://www.matronics.com/Navigator?Pietenpol-List
      <="" span="">
      <="" span="">
      http://forums.matronics.com
      <="" span="">
      
      
      D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=
      3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=
      3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=
      3D
      ot;">www.aeroelectric.com
      books.com"">www.buildersbooks.com
      quot;">www.homebuilthelp.com
      quot;">www.mypilotstore.com
      ">www.mrrace.com
      ot;">http://www.matronics.com/contribution
      D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=
      3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=
      3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=
      3D
      npol-List"">http://www.matronics.com/Navigator?Pietenpol-List
      D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=
      3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=
      3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=
      3D
      //forums.matronics.com
      D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=
      3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=
      3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=
      3D
      
      

Message 6


					INDEX  Back to Main INDEX
				PREVIOUS  Skip to PREVIOUS Message
					NEXT  Skip to NEXT Message
	LIST  Reply to LIST Regarding this Message
		SENDER  Reply to SENDER Regarding this Message

      
      
Time: 05:30:22 AM PST US
Subject: Re: NX308MB Finally Up Again!!
From: danhelsper@aol.com      
      
      Good for you Gary. 380? What's that? MPH? What about the prop re-grind?
      
      Dan Helsper
      Puryear, TN
      
      
      -----Original Message-----
      From: Gary Boothe <gboothe5@comcast.net>
      Sent: Sat, Nov 2, 2013 6:58 am
      Subject: RE: Pietenpol-List: NX308MB Finally Up Again!!
      
      
      Still a bit hot, Mike. About 380.
      
      
      From: owner-pietenpol-list-server@matronics.com [mailto:owner-pietenpol-lis
      t-server@matronics.com] On Behalf Of Michael Groah
      Sent: Saturday, November 02, 2013 4:55 AM
      Subject: Re: Pietenpol-List: NX308MB Finally Up Again!!
      
      
      Congrats Gary.   It's great to see it in the air and know that you can star
      t to enjoy using it again.
      
      
      Mike Groah
      
      
      Sent from my iPad
      
      
      On Nov 2, 2013, at 4:22 AM, "Gary Boothe" <gboothe5@comcast.net> wrote:
      
      
      Rick,
      
      I have nothing bad to say about the A-frame tail wheel gear that Mr. Pieten
      pol designed, the problem was with my cable rigging. Since I had decided to
       use return springs in the cockpit, I had no way of tightening the cables t
      o the tail wheel. Landings wereunpredictable. The new setup is wit
      h a spring that extends the tail wheel back far enough to link to the rudde
      r with a rudder horn. Using a Matco tail wheel.
      
      
      Gary Boothe
      NX308MB
      
      
      From: owner-pietenpol-list-server@matronics.com [mailto:owner-pietenpol-lis
      t-server@matronics.com] On Behalf Of Rick
      Sent: Friday, November 01, 2013 10:07 PM
      Subject: Re: Pietenpol-List: NX308MB Finally Up Again!!
      
      
      Way to go Gary! I'm sure it took a lot of intestinal fortitude to have to r
      ebuild. What changes did you make to your tail wheel design?
      
      
      Rick Schreiber
      
      
      Sent from my iPad
      
      
      On Nov 1, 2013, at 11:18 PM, "Gary Boothe" <gboothe5@comcast.net> wrote:
      
      
      http://www.youtube.com/watch?v=3ziFp2viX1M&feature=youtu.be
      
      Gary Boothe
      NX308MB
      
      
      <="" span="">
      <="" span="">
      www.aeroelectric.com
      www.buildersbooks.com
      www.homebuilthelp.com
      www.mypilotstore.com
      www.mrrace.com
      <="" span="">
      <="" span="">
      http://www.matronics.com/contribution
      <="" span="">
      <="" span="">
      <="" span="">
      <="" span="">
      http://www.matronics.com/Navigator?Pietenpol-List
      <="" span="">
      <="" span="">
      http://forums.matronics.com
      <="" span="">
      
      
      D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3
      D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3
      D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3
      D
      ot;">www.aeroelectric.com
      books.com"">www.buildersbooks.com
      quot;">www.homebuilthelp.com
      quot;">www.mypilotstore.com
      ">www.mrrace.com
      ot;">http://www.matronics.com/contribution
      D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3
      D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3
      D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3
      D
      npol-List"">http://www.matronics.com/Navigator?Pietenpol-List
      D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3
      D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3
      D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3
      D
      //forums.matronics.com
      D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3
      D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3
      D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3
      D
      
      
      www.aeroelectric.com
      www.buildersbooks.com
      www.homebuilthelp.com
      www.mypilotstore.com
      www.mrrace.com
      
      http://www.matronics.com/contribution
      
      
      http://www.matronics.com/Navigator?Pietenpol-List
      
      
      http://forums.matronics.com
      
      

Message 7


					INDEX  Back to Main INDEX
				PREVIOUS  Skip to PREVIOUS Message
					NEXT  Skip to NEXT Message
	LIST  Reply to LIST Regarding this Message
		SENDER  Reply to SENDER Regarding this Message

      
      
Time: 05:58:51 AM PST US
Subject: Re: NX308MB Finally Up Again!!
From: "John Francis" <Mrkringles@msn.com>      
      
      Very nice Gary!  GoPro camera?
      
      John
      
      --------
      John Francis
      
      
      Read this topic online here:
      
      http://forums.matronics.com/viewtopic.php?p=411962#411962
      
      

Message 8


					INDEX  Back to Main INDEX
				PREVIOUS  Skip to PREVIOUS Message
					NEXT  Skip to NEXT Message
	LIST  Reply to LIST Regarding this Message
		SENDER  Reply to SENDER Regarding this Message

      
      
Time: 06:08:35 AM PST US
From: "Gary Boothe" <gboothe5@comcast.net>
Subject: Re: NX308MB Finally Up Again!!      
      
      Sony HDR...cost a lot less! Thanks!
      
      
      -----Original Message-----
      From: owner-pietenpol-list-server@matronics.com
      [mailto:owner-pietenpol-list-server@matronics.com] On Behalf Of John Francis
      Sent: Saturday, November 02, 2013 5:58 AM
      Subject: Pietenpol-List: Re: NX308MB Finally Up Again!!
      
      --> <Mrkringles@msn.com>
      
      Very nice Gary!  GoPro camera?
      
      John
      
      --------
      John Francis
      
      
      Read this topic online here:
      
      http://forums.matronics.com/viewtopic.php?p=411962#411962
      
      

Message 9


					INDEX  Back to Main INDEX
				PREVIOUS  Skip to PREVIOUS Message
					NEXT  Skip to NEXT Message
	LIST  Reply to LIST Regarding this Message
		SENDER  Reply to SENDER Regarding this Message

      
      
Time: 06:16:05 AM PST US
From: "Douwe Blumberg" <douweblumberg@earthlink.net>
Subject: gary's rebuild      
      Way to go Gary!!  Takes guts!!!
      
      
      Douwe
      
      

Message 10


					INDEX  Back to Main INDEX
				PREVIOUS  Skip to PREVIOUS Message
					NEXT  Skip to NEXT Message
	LIST  Reply to LIST Regarding this Message
		SENDER  Reply to SENDER Regarding this Message

      
      
Time: 06:27:13 AM PST US
From: "Gary Boothe" <gboothe5@comcast.net>
Subject: gary's rebuild      
      Thanks, Douwe! I reckon I'm in good company.
      
      
      Gary Boothe
      
      NX308MB
      
      
      From: owner-pietenpol-list-server@matronics.com
      [mailto:owner-pietenpol-list-server@matronics.com] On Behalf Of Douwe
      Blumberg
      Sent: Saturday, November 02, 2013 6:17 AM
      Subject: Pietenpol-List: gary's rebuild
      
      
      Way to go Gary!!  Takes guts!!!
      
      
      Douwe
      
      

Message 11


					INDEX  Back to Main INDEX
				PREVIOUS  Skip to PREVIOUS Message
					NEXT  Skip to NEXT Message
	LIST  Reply to LIST Regarding this Message
		SENDER  Reply to SENDER Regarding this Message

      
      
Time: 07:12:51 AM PST US
From: "l.morlock" <l.morlock@att.net>
Subject: Re: NX308MB Finally Up Again!!      
      Congratulations, Gary !!!  Wish I could make major repairs that quickly 
      (and that well).  Way to go.
      
          Larry
      
          
      

Message 12


					INDEX  Back to Main INDEX
				PREVIOUS  Skip to PREVIOUS Message
					NEXT  Skip to NEXT Message
	LIST  Reply to LIST Regarding this Message
		SENDER  Reply to SENDER Regarding this Message

      
      
Time: 08:02:40 AM PST US
Subject: Re: NX308MB Finally Up Again!!
From: "echobravo4" <eab4@comcast.net>      
      
      Congratulations Gary! 
      Great news!
      
      --------
      Earl Brown
      
      I may not have gone where I intended to go, but I think I have ended up where I
      intended to be.
      
      
      Read this topic online here:
      
      http://forums.matronics.com/viewtopic.php?p=411973#411973
      
      

Message 13


					INDEX  Back to Main INDEX
				PREVIOUS  Skip to PREVIOUS Message
					NEXT  Skip to NEXT Message
	LIST  Reply to LIST Regarding this Message
		SENDER  Reply to SENDER Regarding this Message

      
      
Time: 03:13:59 PM PST US
Subject: Re: NX308MB Finally Up Again!!
From: "Bill Church" <billspiet@sympatico.ca>      
      
      Yee haw!
      Way to go, Gary.
      
      BC
      
      
      Read this topic online here:
      
      http://forums.matronics.com/viewtopic.php?p=411975#411975
      
      

Message 14


					INDEX  Back to Main INDEX
				PREVIOUS  Skip to PREVIOUS Message
					NEXT  Skip to NEXT Message
	LIST  Reply to LIST Regarding this Message
		SENDER  Reply to SENDER Regarding this Message

      
      
Time: 06:14:49 PM PST US
Subject: Re: NX308MB Finally Up Again!!
From: "taildrags" <taildrags@hotmail.com>      
      
      Gary;
      
      I've always considered that life in California would be like "that hot place down
      there", but can it really be 380 degrees where you are?  You probably mean
      that your CHTs are running that high ;o)  Note that there has recently been a
      discussion on WW's website about where the CHT sensor is placed and what the corresponding
      temperatures should be, based on the sensor placement.  The question
      is, where is your CHT sensor placed?  Under the plugs, or at the threaded
      boss in the head?  And if under the plugs, which specific cylinder/plug? They
      don't all run the same temperature.
      
      --------
      Oscar Zuniga
      Medford, OR
      Air Camper NX41CC &quot;Scout&quot;
      A75 power
      
      
      Read this topic online here:
      
      http://forums.matronics.com/viewtopic.php?p=411976#411976
      
      

Message 15


					INDEX  Back to Main INDEX
				PREVIOUS  Skip to PREVIOUS Message
					NEXT  Skip to NEXT Message
	LIST  Reply to LIST Regarding this Message
		SENDER  Reply to SENDER Regarding this Message

      
      
Time: 06:17:43 PM PST US
From: John Franklin <jbfjr@peoplepc.com>
Subject: Regarding the Contrex sensor...      
      
      While we're on the subject of the Contrex sensor, how are you guys holding it in
      place?  I welded up a "T" bracket like the one shown on WW's website.  He mentions
      it as being a press fit, I believe.  Mine fits fairly tight but I don't
      know if it will hold the correct position since I haven't run the engine with
      it in place.  I was hoping some RTV in the end of the tube might hold it but
      would like to hear what your experiences have shown.
      
      Thanks,
      John Franklin
      Prairie Aire 4TA0
      Needville, TX
      
      

Message 16


					INDEX  Back to Main INDEX
				PREVIOUS  Skip to PREVIOUS Message
					NEXT  Skip to NEXT Message
	LIST  Reply to LIST Regarding this Message
		SENDER  Reply to SENDER Regarding this Message

      
      
Time: 06:37:27 PM PST US
From: "Gary Boothe" <gboothe5@comcast.net>
Subject: Re: NX308MB Finally Up Again!!      
      
      WAS under the plug, but now under the 'hot' cylinder. Not sure if it made
      any difference. Yes, I have been closely following that commentary. More
      flight testing is required...
      
      Thanks,
      Gary Boothe
      NX308MB
      
      
      -----Original Message-----
      From: owner-pietenpol-list-server@matronics.com
      [mailto:owner-pietenpol-list-server@matronics.com] On Behalf Of taildrags
      Sent: Saturday, November 02, 2013 6:15 PM
      Subject: Pietenpol-List: Re: NX308MB Finally Up Again!!
      
      --> <taildrags@hotmail.com>
      
      Gary;
      
      I've always considered that life in California would be like "that hot place
      down there", but can it really be 380 degrees where you are?  You probably
      mean that your CHTs are running that high ;o)  Note that there has recently
      been a discussion on WW's website about where the CHT sensor is placed and
      what the corresponding temperatures should be, based on the sensor
      placement.  The question is, where is your CHT sensor placed?  Under the
      plugs, or at the threaded boss in the head?  And if under the plugs, which
      specific cylinder/plug? They don't all run the same temperature.
      
      --------
      Oscar Zuniga
      Medford, OR
      Air Camper NX41CC &quot;Scout&quot;
      A75 power
      
      
      Read this topic online here:
      
      http://forums.matronics.com/viewtopic.php?p=411976#411976
      
      

Message 17


					INDEX  Back to Main INDEX
				PREVIOUS  Skip to PREVIOUS Message
					NEXT  Skip to NEXT Message
	LIST  Reply to LIST Regarding this Message
		SENDER  Reply to SENDER Regarding this Message

      
      
Time: 07:43:11 PM PST US
Subject: Re: NX308MB Finally Up Again!!
From: Steven Dortch <steven.d.dortch@gmail.com>      
      Took my boy to the Texas-Kansas game today. Should have been working on the
      Piet.
      
      Yahoo! inspiring.
      
      Steve D
      
      
      On Fri, Nov 1, 2013 at 11:18 PM, Gary Boothe <gboothe5@comcast.net> wrote:
      
      > http://www.youtube.com/watch?v=3ziFp2viX1M&feature=youtu.be
      >
      >
      > Gary Boothe
      >
      > NX308MB
      >
      >
      > *
      >
      > *
      >
      >
      








Other Matronics Email List Services




Post A New Message    pietenpol-list@matronics.com
UN/SUBSCRIBE    http://www.matronics.com/subscription
List FAQ    http://www.matronics.com/FAQ/Pietenpol-List.htm
Web Forum Interface To Lists    http://forums.matronics.com
Matronics List Wiki    http://wiki.matronics.com
7-Day List Browse    http://www.matronics.com/browse/pietenpol-list
Browse Pietenpol-List Digests    http://www.matronics.com/digest/pietenpol-list
Browse Other Lists    http://www.matronics.com/browse
Live Online Chat!    http://www.matronics.com/chat
Archive Downloading    http://www.matronics.com/archives
Photo Share    http://www.matronics.com/photoshare
Other Email Lists    http://www.matronics.com/emaillists
Contributions    http://www.matronics.com/contribution









These Email List Services are sponsored solely by Matronics and through the generous Contributions of its members.




-- Please support this service by making your Contribution today! --