---------------------------------------------------------- Pietenpol-List Digest Archive --- Total Messages Posted Wed 12/25/13: 8 ---------------------------------------------------------- Today's Message Index: ---------------------- 1. 06:06 AM - Re: Re: adding trim (Michael Perez) 2. 06:20 AM - Uncle Tony's Books (Gary Boothe) 3. 07:14 AM - Re: Uncle Tony's Books (Marcus Zechini) 4. 09:30 AM - Re: Uncle Tony's Books (aviken) 5. 10:20 AM - Re: Re: Uncle Tony's Books (Gary Boothe) 6. 01:35 PM - Re: Re: Uncle Tony's Books (Ken Bickers) 7. 01:39 PM - Re: Re: Uncle Tony's Books (Ken Bickers) 8. 07:37 PM - I was a very good boy this year (nightmare) ________________________________ Message 1 _____________________________________ Time: 06:06:12 AM PST US From: Michael Perez Subject: Re: Pietenpol-List: Re: adding trim I believe the cylinders will still need to be removed initally to remove th e old tubes. Yes?-I have a second engine that I will rebuild someday and I will be looking into making this change for that one.=0A=0AIf God is your co-pilot...switch seats.=0AMichael Perez=0APietenpol HINT Videos=0AKaretak er Aero=0Ahttp://www.karetakeraero.com/ ________________________________ Message 2 _____________________________________ Time: 06:20:53 AM PST US Subject: Pietenpol-List: Uncle Tony's Books From: Gary Boothe Oscar, Now can we be friends again? Gary Sent from my iPhone


________________________________ Message 3 _____________________________________ Time: 07:14:20 AM PST US Subject: Re: Pietenpol-List: Uncle Tony's Books From: Marcus Zechini Mentioned the books to my daughter....got the whole set for Christmas!! On Dec 25, 2013 9:22 AM, "Gary Boothe" wrote: > Oscar, > > Now can we be friends again? > > > Gary > > Sent from my iPhone >

>
> www.aeroelectric.com
> www.buildersbooks.com
> www.homebuilthelp.com
> www.mypilotstore.com
> 
> http://www.matronics.com/contribution
> http://www.matronics.com/Navigator?Pietenpol-List
> http://forums.matronics.com
> 
> ________________________________ Message 4 _____________________________________ Time: 09:30:07 AM PST US Subject: Pietenpol-List: Re: Uncle Tony's Books From: "aviken" aren't daughters great! Mine got me a set as well . trouble is now I cant play stupid anymore.. Merry Christmas Read this topic online here: http://forums.matronics.com/viewtopic.php?p=416189#416189 ________________________________ Message 5 _____________________________________ Time: 10:20:43 AM PST US Subject: Re: Pietenpol-List: Re: Uncle Tony's Books From: Gary Boothe That's where mine came from, too! Gary Sent from my iPhone > On Dec 25, 2013, at 9:29 AM, "aviken" wrote: > > > aren't daughters great! Mine got me a set as well . trouble is now I cant play stupid anymore.. Merry Christmas > > > > > Read this topic online here: > > http://forums.matronics.com/viewtopic.php?p=416189#416189 > > > > > > > > > > ________________________________ Message 6 _____________________________________ Time: 01:35:49 PM PST US Subject: Re: Pietenpol-List: Re: Uncle Tony's Books From: Ken Bickers 'course the fun starts when you actually crack open the books and begin putting Uncle Tony's advice to work. Here's a grommet plate I made yesterday based on his recommendations. It took maybe fifteen minutes. Cost nothing because I had some galvanized flashing on hand. If it is too large, too small, too ugly, too whatever, I can make another and another and another. All thanks to Mr. Bingelis. These run $9.50 each, plus shipping from ACS. Merry Christmas. Cheers, Ken On Wed, Dec 25, 2013 at 11:20 AM, Gary Boothe wrote: > > That's where mine came from, too! > > Gary > > Sent from my iPhone > > > On Dec 25, 2013, at 9:29 AM, "aviken" wrote: > > > > > > aren't daughters great! Mine got me a set as well . trouble is now I > cant play stupid anymore.. Merry Christmas > > > > > > > > > > Read this topic online here: > > > > http://forums.matronics.com/viewtopic.php?p=416189#416189 > > > > > > > > > > > > > > > > > > > > > > ________________________________ Message 7 _____________________________________ Time: 01:39:11 PM PST US Subject: Re: Pietenpol-List: Re: Uncle Tony's Books From: Ken Bickers ... helps if I actually attach the attachment. On Wed, Dec 25, 2013 at 2:35 PM, Ken Bickers wrote: > 'course the fun starts when you actually crack open the books and begin > putting Uncle Tony's advice to work. Here's a grommet plate I made > yesterday based on his recommendations. It took maybe fifteen minutes. > Cost nothing because I had some galvanized flashing on hand. If it is too > large, too small, too ugly, too whatever, I can make another and another > and another. All thanks to Mr. Bingelis. These run $9.50 each, plus > shipping from ACS. > > Merry Christmas. Cheers, Ken > > > On Wed, Dec 25, 2013 at 11:20 AM, Gary Boothe wrote: > >> >> That's where mine came from, too! >> >> Gary >> >> Sent from my iPhone >> >> > On Dec 25, 2013, at 9:29 AM, "aviken" wrote: >> > >> > >> > aren't daughters great! Mine got me a set as well . trouble is now >> I cant play stupid anymore.. Merry Christmas >> > >> > >> > >> > >> > Read this topic online here: >> > >> > http://forums.matronics.com/viewtopic.php?p=416189#416189 >> > >> > >> > >> > >> > >> > >> > >> > >> > >> > >> >> >> >> >> >> > ________________________________ Message 8 _____________________________________ Time: 07:37:59 PM PST US Subject: Pietenpol-List: I was a very good boy this year From: "nightmare" Santa recognized my exceptional behavior this year and got me a tig welder. He must of felt bad watching me making aluminum puddles with my torch. Cant wait to play with it. Happy with my eastwood mig. Im sure they are of the made in china variety but Eastwood provides great customer support. http://www.eastwood.com/tig-welders-eastwood-tig-ac-dc-welder.html -------- Paul Donahue Started 8-3-12 do not archive Read this topic online here: http://forums.matronics.com/viewtopic.php?p=416207#416207 ------------------------------------------------------------------------------------- Other Matronics Email List Services ------------------------------------------------------------------------------------- Post A New Message pietenpol-list@matronics.com UN/SUBSCRIBE http://www.matronics.com/subscription List FAQ http://www.matronics.com/FAQ/Pietenpol-List.htm Web Forum Interface To Lists http://forums.matronics.com Matronics List Wiki http://wiki.matronics.com Full Archive Search Engine http://www.matronics.com/search 7-Day List Browse http://www.matronics.com/browse/pietenpol-list Browse Digests http://www.matronics.com/digest/pietenpol-list Browse Other Lists http://www.matronics.com/browse Live Online Chat! http://www.matronics.com/chat Archive Downloading http://www.matronics.com/archives Photo Share http://www.matronics.com/photoshare Other Email Lists http://www.matronics.com/emaillists Contributions http://www.matronics.com/contribution ------------------------------------------------------------------------------------- These Email List Services are sponsored solely by Matronics and through the generous Contributions of its members.