---------------------------------------------------------- Pietenpol-List Digest Archive --- Total Messages Posted Sat 12/28/13: 7 ---------------------------------------------------------- Today's Message Index: ---------------------- 1. 04:38 PM - aileron control horn (nightmare) 2. 04:43 PM - Re: aileron control horn (Ken Bickers) 3. 06:30 PM - Re: aileron control horn (Jack Phillips) 4. 06:40 PM - Re: aileron control horn (Gary Boothe) 5. 06:45 PM - Re: aileron control horn (Ken Bickers) 6. 07:03 PM - Re: aileron control horn (Gary Boothe) 7. 09:53 PM - Re: aileron control horn (nightmare) ________________________________ Message 1 _____________________________________ Time: 04:38:41 PM PST US Subject: Pietenpol-List: aileron control horn From: "nightmare" When building the aileron control horn that is attached to torque tube..... is it built so that the cables will be slightly off set so the cables dont rub against eachother as they cross while going up? Or just let them rub? -------- Paul Donahue Started 8-3-12 do not archive Read this topic online here: http://forums.matronics.com/viewtopic.php?p=416298#416298 Attachments: http://forums.matronics.com//files/20131228_193730_204.jpg ________________________________ Message 2 _____________________________________ Time: 04:43:30 PM PST US Subject: Re: Pietenpol-List: aileron control horn From: Ken Bickers I built mine with some offset. Cables constantly rubbing seems like a bad idea, at least to my mind. On Sat, Dec 28, 2013 at 5:38 PM, nightmare wrote: > pauldonahuepilot@yahoo.com> > > When building the aileron control horn that is attached to torque > tube..... is it built so that the cables will be slightly off set so the > cables dont rub against eachother as they cross while going up? Or just let > them rub? > > -------- > Paul Donahue > Started 8-3-12 > do not archive > > > Read this topic online here: > > http://forums.matronics.com/viewtopic.php?p=416298#416298 > > > Attachments: > > http://forums.matronics.com//files/20131228_193730_204.jpg > > ________________________________ Message 3 _____________________________________ Time: 06:30:40 PM PST US From: "Jack Phillips" Subject: RE: Pietenpol-List: aileron control horn I built mine straight, then bent the horns slightly to achieve the desired offset. Easier to do than trying to figure out how much offset you need. It doesn't take much to bend them slightly. Jack Phillips NX899JP Smith Mountain Lake, Virginia _____ From: owner-pietenpol-list-server@matronics.com [mailto:owner-pietenpol-list-server@matronics.com] On Behalf Of Ken Bickers Sent: Saturday, December 28, 2013 7:43 PM Subject: Re: Pietenpol-List: aileron control horn I built mine with some offset. Cables constantly rubbing seems like a bad idea, at least to my mind. On Sat, Dec 28, 2013 at 5:38 PM, nightmare wrote: When building the aileron control horn that is attached to torque tube..... is it built so that the cables will be slightly off set so the cables dont rub against eachother as they cross while going up? Or just let them rub? -------- Paul Donahue Started 8-3-12 do not archive Read this topic online here: http://forums.matronics.com/viewtopic.php?p=416298#416298 Attachments: http://forums.matronics.com//files/20131228_193730_204.jpg ========== ="_blank">www.aeroelectric.com ooks.com" target="_blank">www.buildersbooks.com et="_blank">www.homebuilthelp.com et="_blank">www.mypilotstore.com "_blank">www.mrrace.com ="_blank">http://www.matronics.com/contribution le, List Admin. ========== st" target="_blank">http://www.matronics.com/Navigator?Pietenpol-List ========== http://forums.matronics.com ========== ________________________________ Message 4 _____________________________________ Time: 06:40:53 PM PST US Subject: Re: Pietenpol-List: aileron control horn From: Gary Boothe If you build the horn perfectly, they'll rub...I had issue. Gary NX308MB Sent from my iPhone > On Dec 28, 2013, at 6:30 PM, "Jack Phillips" wr ote: > > I built mine straight, then bent the horns slightly to achieve the desired offset. Easier to do than trying to figure out how much offset you need. I t doesn=99t take much to bend them slightly. > > Jack Phillips > NX899JP > Smith Mountain Lake, Virginia > > From: owner-pietenpol-list-server@matronics.com [mailto:owner-pietenpol-li st-server@matronics.com] On Behalf Of Ken Bickers > Sent: Saturday, December 28, 2013 7:43 PM > To: pietenpol-list@matronics.com > Subject: Re: Pietenpol-List: aileron control horn > > I built mine with some offset. Cables constantly rubbing seems like a bad idea, at least to my mind. > > > On Sat, Dec 28, 2013 at 5:38 PM, nightmare wr ote: com> > > When building the aileron control horn that is attached to torque tube.... . is it built so that the cables will be slightly off set so the cables don t rub against eachother as they cross while going up? Or just let them rub? > > -------- > Paul Donahue > Started 8-3-12 > do not archive > > > > > Read this topic online here: > > http://forums.matronics.com/viewtopic.php?p=416298#416298 > > > > > Attachments: > > http://forums.matronics.com//files/20131228_193730_204.jpg > > > > > ========== > ="_blank">www.aeroelectric.com > ooks.com" target="_blank">www.buildersbooks.com > et="_blank">www.homebuilthelp.com > et="_blank">www.mypilotstore.com > "_blank">www.mrrace.com > ="_blank">http://www.matronics.com/contribution > le, List Admin. > ========== > st" target="_blank">http://www.matronics.com/Navigator?Pietenpol-List > ========== > http://forums.matronics.com > ========== > > > > > > > www.buildersbooks.com > www.mypilotstore.com > http://www.matronics.com/Navigator?Pietenpol-List > http://forums.matronics.com > > 3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3 D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D =3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D 3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3 D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D =3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D 3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3 D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D =3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D 3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3 D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D =3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D ________________________________ Message 5 _____________________________________ Time: 06:45:51 PM PST US Subject: Re: Pietenpol-List: aileron control horn From: Ken Bickers ah ... the price of perfection. :) On Sat, Dec 28, 2013 at 7:38 PM, Gary Boothe wrote: > If you build the horn perfectly, they'll rub...I had issue. > > Gary > NX308MB > > Sent from my iPhone > > On Dec 28, 2013, at 6:30 PM, "Jack Phillips" > wrote: > > I built mine straight, then bent the horns slightly to achieve the > desired offset. Easier to do than trying to figure out how much offset y ou > need. It doesn=92t take much to bend them slightly. > > > Jack Phillips > > NX899JP > > Smith Mountain Lake, Virginia > > > ------------------------------ > > *From:* owner-pietenpol-list-server@matronics.com [ > mailto:owner-pietenpol-list-server@matronics.com] > *On Behalf Of *Ken Bickers > *Sent:* Saturday, December 28, 2013 7:43 PM > *To:* pietenpol-list@matronics.com > *Subject:* Re: Pietenpol-List: aileron control horn > > > I built mine with some offset. Cables constantly rubbing seems like a ba d > idea, at least to my mind. > > > On Sat, Dec 28, 2013 at 5:38 PM, nightmare > wrote: > > pauldonahuepilot@yahoo.com> > > When building the aileron control horn that is attached to torque > tube..... is it built so that the cables will be slightly off set so the > cables dont rub against eachother as they cross while going up? Or just l et > them rub? > > -------- > Paul Donahue > Started 8-3-12 > do not archive > > > Read this topic online here: > > http://forums.matronics.com/viewtopic.php?p=416298#416298 > > > Attachments: > > http://forums.matronics.com//files/20131228_193730_204.jpg > > > ========== > ="_blank">www.aeroelectric.com > ooks.com" target="_blank">www.buildersbooks.com > et="_blank">www.homebuilthelp.com > et="_blank">www.mypilotstore.com > "_blank">www.mrrace.com > ="_blank">http://www.matronics.com/contribution > le, List Admin. > ========== > st" target="_blank">http://www.matronics.com/Navigator?Pietenpol-List > ========== > http://forums.matronics.com > ========== > > > *www.buildersbooks.com * > > *www.mypilotstore.com * > > *http://www.matronics.com/Navigator?Pietenpol-List * > > *http://forums.matronics.com * > > * > > D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D =3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D =3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D =3D > ot;">www.aeroelectric.com > books.com "">www.buildersbooks.com > quot;">www.homebuilthelp.com > quot;">www.mypilotstore.com > ">www.mrrace.com > ot;">http://www.matronics.com/contribution > D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D =3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D =3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D =3D > npol-List"">http://www.matronics.com/Navigator?Pietenpol-List > D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D =3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D =3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D =3D > //forums.matronics.com > D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D =3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D =3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D =3D > * > > * > =========== m> ldersbooks.com> .com> com> om/contribution> =========== .matronics.com/Navigator?Pietenpol-List> =========== =========== > * > > ________________________________ Message 6 _____________________________________ Time: 07:03:36 PM PST US Subject: Re: Pietenpol-List: aileron control horn From: Gary Boothe Meant to say, "I had NO issue!" Sent from my iPhone > On Dec 28, 2013, at 6:45 PM, Ken Bickers wrote: > > ah ... the price of perfection. > > :) > > >> On Sat, Dec 28, 2013 at 7:38 PM, Gary Boothe wrote : >> If you build the horn perfectly, they'll rub...I had issue. >> >> Gary >> NX308MB >> >> Sent from my iPhone >> >>> On Dec 28, 2013, at 6:30 PM, "Jack Phillips" w rote: >>> >>> I built mine straight, then bent the horns slightly to achieve the desir ed offset. Easier to do than trying to figure out how much offset you need. It doesn=99t take much to bend them slightly. >>> >>> >>> >>> Jack Phillips >>> >>> NX899JP >>> >>> Smith Mountain Lake, Virginia >>> >>> >>> >>> From: owner-pietenpol-list-server@matronics.com [mailto:owner-pietenpol- list-server@matronics.com] On Behalf Of Ken Bickers >>> Sent: Saturday, December 28, 2013 7:43 PM >>> To: pietenpol-list@matronics.com >>> Subject: Re: Pietenpol-List: aileron control horn >>> >>> >>> >>> I built mine with some offset. Cables constantly rubbing seems like a b ad idea, at least to my mind. >>> >>> >>> >>> On Sat, Dec 28, 2013 at 5:38 PM, nightmare w rote: >>> o.com> >>> >>> When building the aileron control horn that is attached to torque tube.. ... is it built so that the cables will be slightly off set so the cables d ont rub against eachother as they cross while going up? Or just let them rub ? >>> >>> -------- >>> Paul Donahue >>> Started 8-3-12 >>> do not archive >>> >>> >>> >>> >>> Read this topic online here: >>> >>> http://forums.matronics.com/viewtopic.php?p=416298#416298 >>> >>> >>> >>> >>> Attachments: >>> >>> http://forums.matronics.com//files/20131228_193730_204.jpg >>> >>> >>> >>> >>> ========== >>> ="_blank">www.aeroelectric.com >>> ooks.com" target="_blank">www.buildersbooks.com >>> et="_blank">www.homebuilthelp.com >>> et="_blank">www.mypilotstore.com >>> "_blank">www.mrrace.com >>> ="_blank">http://www.matronics.com/contribution >>> le, List Admin. >>> ========== >>> st" target="_blank">http://www.matronics.com/Navigator?Pietenpol-List >>> ========== >>> http://forums.matronics.com >>> ========== >>> >>> >>> >>> >>> >>> >>> >>> www.buildersbooks.com >>> www.mypilotstore.com >>> http://www.matronics.com/Navigator?Pietenpol-List >>> http://forums.matronics.com >>> >>> >>> D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D= 3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3 D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D >>> ot;">www.aeroelectric.com >>> books.com"">www.buildersbooks.com >>> quot;">www.homebuilthelp.com >>> quot;">www.mypilotstore.com >>> ">www.mrrace.com >>> ot;">http://www.matronics.com/contribution >>> D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D= 3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3 D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D >>> npol-List"">http://www.matronics.com/Navigator?Pietenpol-List >>> D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D= 3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3 D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D >>> //forums.matronics.com >>> D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D= 3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3 D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D >> >> >> _blank">www.aeroelectric.com >> .com" target="_blank">www.buildersbooks.com >> ="_blank">www.homebuilthelp.com >> ="_blank">www.mypilotstore.com >> ank">www.mrrace.com >> _blank">http://www.matronics.com/contribution >> " target="_blank">http://www.matronics.com/Navigator?Pietenpol-List >> tp://forums.matronics.com > > > 3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3 D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D =3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D 3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3 D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D =3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D 3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3 D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D =3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D 3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3 D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D =3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D ________________________________ Message 7 _____________________________________ Time: 09:53:54 PM PST US Subject: Pietenpol-List: Re: aileron control horn From: "nightmare" Great. Thanks guys. -------- Paul Donahue Started 8-3-12 do not archive Read this topic online here: http://forums.matronics.com/viewtopic.php?p=416311#416311 ------------------------------------------------------------------------------------- Other Matronics Email List Services ------------------------------------------------------------------------------------- Post A New Message pietenpol-list@matronics.com UN/SUBSCRIBE http://www.matronics.com/subscription List FAQ http://www.matronics.com/FAQ/Pietenpol-List.htm Web Forum Interface To Lists http://forums.matronics.com Matronics List Wiki http://wiki.matronics.com Full Archive Search Engine http://www.matronics.com/search 7-Day List Browse http://www.matronics.com/browse/pietenpol-list Browse Digests http://www.matronics.com/digest/pietenpol-list Browse Other Lists http://www.matronics.com/browse Live Online Chat! http://www.matronics.com/chat Archive Downloading http://www.matronics.com/archives Photo Share http://www.matronics.com/photoshare Other Email Lists http://www.matronics.com/emaillists Contributions http://www.matronics.com/contribution ------------------------------------------------------------------------------------- These Email List Services are sponsored solely by Matronics and through the generous Contributions of its members.