Today's Message Index:
----------------------
1. 04:32 AM - Re: Re: my Uncle Tony talks about how to swing a compass...and then (Jack Phillips)
2. 07:17 AM - Egad!! The Top Curmudgeon has abdicated! (Lawrence Williams)
3. 07:36 AM - Re: Egad!! The Top Curmudgeon has abdicated! (Gary Boothe)
4. 07:49 AM - The Top Curmudgeon has abdicated! (Cuy, Michael D. (GRC-RXD0)[Vantage Partners, LLC])
5. 07:52 AM - Re: Egad!! The Top Curmudgeon has abdicated! (Jack Phillips)
6. 08:35 AM - 6061 tail hinges (Ken Chambers)
7. 09:09 AM - Re: Scimitar propeller drawings (danhelsper@aol.com)
8. 09:28 AM - Re: Re: newsletter (Barry Davis)
9. 09:54 AM - Re: Re: newsletter (Craig Aho)
10. 10:11 AM - Re: Egad!! The Top Curmudgeon has abdicated! (tools)
11. 10:11 AM - Re: newsletter (Bill Church)
12. 10:13 AM - Re: 6061 tail hinges (larharris2 Harris)
13. 10:30 AM - Re: Re: Egad!! The Top Curmudgeon has abdicated! (Robert Rice)
14. 11:50 AM - Re: Re: newsletter (Craig Aho)
15. 01:57 PM - Re: Egad!! The Top Curmudgeon has abdicated! (Don Emch)
16. 02:21 PM - Re: Scimitar propeller drawings (Vasek)
17. 04:05 PM - Re: Re: Egad!! The Top Curmudgeon has abdicated! (danhelsper@aol.com)
18. 05:08 PM - Re: 6061 tail hinges (jarheadpilot82)
19. 05:37 PM - Re: The Top Curmudgeon has abdicated! (shad bell)
20. 05:44 PM - Re: The Top Curmudgeon has abdicated! (John Hofmann)
21. 05:58 PM - Re: The Top Curmudgeon has abdicated! (Gary Boothe)
22. 06:13 PM - Re: Egad!! The Top Curmudgeon has abdicated! (tools)
23. 06:20 PM - Re: Egad!! The Top Curmudgeon has abdicated! (jarheadpilot82)
24. 07:49 PM - Re: Egad!! The Top Curmudgeon has abdicated! (Mild Bill)
25. 08:38 PM - Re: The Top Curmudgeon has abdicated! (Bill Church)
26. 08:46 PM - Re: Re: The Top Curmudgeon has abdicated! (glenschweizer@yahoo.com)
27. 09:44 PM - Re: Scimitar propeller drawings (taildrags)
28. 11:39 PM - Re: Re: The Top Curmudgeon has abdicated! (Clif Dawson)
29. 11:49 PM - Re: 6061 tail hinges (Clif Dawson)
Message 1
INDEX | Back to Main INDEX |
NEXT | Skip to NEXT Message |
LIST | Reply to LIST Regarding this Message |
SENDER | Reply to SENDER Regarding this Message |
|
Subject: | Re: my Uncle Tony talks about how to swing a compass...and |
then
That reminds me, Oscar - you don't have to buy that expensive compass fluid.
It is nothing more than lighter fluid, like the old Zippo lighters used.
Gulflite charcoal lighter fluid works just fine for much lower cost.
Jack Phillips
NX899JP
Smith Mountain Lake, Virginia
-----Original Message-----
From: owner-pietenpol-list-server@matronics.com
[mailto:owner-pietenpol-list-server@matronics.com] On Behalf Of taildrags
Sent: Monday, March 03, 2014 10:29 PM
Subject: Pietenpol-List: Re: my Uncle Tony talks about how to swing a
compass...and then
Thank you, Mikee, but this time I already knew how to do what needed to be
done. I assume that you posted this for the benefit of others who might not
know the correct procedure. A certain [UNCLASSIFIED] friend of mine comes
to mind ;o)
And my thanks to Ben Charvet for pointing out to me that I can save the cost
of buying a brass screwdriver by taking an old key and
filing/grinding/shaping it into a screwdriver suitable for adjusting the
compensator screws on the instrument. A true Pietenpoler.
In preparation for conducting this precision operation, I bought a bottle of
Templeton Rye, should my whiskey compass require topping up.
--------
Oscar Zuniga
Medford, OR
Air Camper NX41CC "Scout"
A75 power
Read this topic online here:
http://forums.matronics.com/viewtopic.php?p=419748#419748
Message 2
INDEX | Back to Main INDEX |
PREVIOUS | Skip to PREVIOUS Message |
NEXT | Skip to NEXT Message |
LIST | Reply to LIST Regarding this Message |
SENDER | Reply to SENDER Regarding this Message |
|
Subject: | Egad!! The Top Curmudgeon has abdicated! |
Because of the unrest in the Middle East and Crimea, economic malaise, global warming
and the volatility of bitcoins, I am so overwrought that I have not been
able to discharge the duties of TC for several months. I think it is only fair
that I relinquish my post so that someone else can take over.
I stepped up to the position after Chris Eggsgard passed away and have proudly
carried on in his tradition ever since. He was a man who loved the beauty and
simplicity of Mr. Pietenpol's design and would tolerate no lookalikes. The very
mention of the name Grega or GN-1 would incur his wrath and it was frightening
to behold. I never heard him utter the phrase " There is no such thing as a
stupid question", believing that a certain amount of rational thinking was a
prerequisite to attempting the task of recreating the classic design.
Hopefully someone with a sharp pen and tongue as well as a penchant for keeping
the marque pure will step up to fill Chris's shoes. Touchy-feely political correctness
is not a prerequisite for this position!
In the future I will simply be:
Larry Williams the Abominable Slowman
N899LW
Message 3
INDEX | Back to Main INDEX |
PREVIOUS | Skip to PREVIOUS Message |
NEXT | Skip to NEXT Message |
LIST | Reply to LIST Regarding this Message |
SENDER | Reply to SENDER Regarding this Message |
|
Subject: | Re: Egad!! The Top Curmudgeon has abdicated! |
A.S.
I feel the same pressures as you. Unfortunately, this announcement only adds to
that!
The individual who first comes to mind, who knows Mr. Pietenpol's intents second
only to you, is the distinguished proprietor of Loensloe Air Service; although
it is rumored that his personality is kindly and soft spoken. Still, I have
witnessed a coarser side when builders expose proposed changes to the design
in an attempt to improve the Pietenpol. There may be hope....
Gary
NX308MB
Sent from my iPhone
> On Mar 4, 2014, at 7:16 AM, Lawrence Williams <lnawms@yahoo.com> wrote:
>
>
> Because of the unrest in the Middle East and Crimea, economic malaise, global
warming and the volatility of bitcoins, I am so overwrought that I have not been
able to discharge the duties of TC for several months. I think it is only
fair that I relinquish my post so that someone else can take over.
>
> I stepped up to the position after Chris Eggsgard passed away and have proudly
carried on in his tradition ever since. He was a man who loved the beauty and
simplicity of Mr. Pietenpol's design and would tolerate no lookalikes. The very
mention of the name Grega or GN-1 would incur his wrath and it was frightening
to behold. I never heard him utter the phrase " There is no such thing as
a stupid question", believing that a certain amount of rational thinking was
a prerequisite to attempting the task of recreating the classic design.
>
> Hopefully someone with a sharp pen and tongue as well as a penchant for keeping
the marque pure will step up to fill Chris's shoes. Touchy-feely political
correctness is not a prerequisite for this position!
>
> In the future I will simply be:
> Larry Williams the Abominable Slowman
> N899LW
>
>
>
>
>
Message 4
INDEX | Back to Main INDEX |
PREVIOUS | Skip to PREVIOUS Message |
NEXT | Skip to NEXT Message |
LIST | Reply to LIST Regarding this Message |
SENDER | Reply to SENDER Regarding this Message |
|
Subject: | The Top Curmudgeon has abdicated! |
Larry, Larry, Larry-----all Pietenpols are snowflakes, don't you know that
by now you veteran Pietenpoler? No two are alike Larry, kinda like you
and Chris
Eggsgard. (thank God:))! A GN-1 is just like a Pietenpol only differen
t. We know down deep you are a very touchy-feely kind of guy and secret
ly love
all the different non-Pietenpol plan modifications and 'new' ideas. Bein
g a grandparent is making it hard for you to be a Top Curmudegon lately----
we understand
but I personally still think you have it in you. We need a Vince Lombard
i kind of tough guy to keep the Pietenpol purist faction alive. Don't p
ass the torch Larry----
dig your heels in and win one for George Zip.....win one for the Zipper.
Message 5
INDEX | Back to Main INDEX |
PREVIOUS | Skip to PREVIOUS Message |
NEXT | Skip to NEXT Message |
LIST | Reply to LIST Regarding this Message |
SENDER | Reply to SENDER Regarding this Message |
|
Subject: | Egad!! The Top Curmudgeon has abdicated! |
I second the motion that Dan become the new TC. Dan can have an ascerbic
wit - he's just too nice to show it often.
Jack Phillips
NX899JP
Smith Mountain Lake, Virginia
Somewhat of a Curmudgeon myself, but since I don't have a Model A in my
Pietenpol, I'm not qualified.
-----Original Message-----
From: owner-pietenpol-list-server@matronics.com
[mailto:owner-pietenpol-list-server@matronics.com] On Behalf Of Gary Boothe
Sent: Tuesday, March 04, 2014 10:36 AM
Subject: Re: Pietenpol-List: Egad!! The Top Curmudgeon has abdicated!
A.S.
I feel the same pressures as you. Unfortunately, this announcement only adds
to that!
The individual who first comes to mind, who knows Mr. Pietenpol's intents
second only to you, is the distinguished proprietor of Loensloe Air Service;
although it is rumored that his personality is kindly and soft spoken.
Still, I have witnessed a coarser side when builders expose proposed changes
to the design in an attempt to improve the Pietenpol. There may be hope....
Gary
NX308MB
Sent from my iPhone
> On Mar 4, 2014, at 7:16 AM, Lawrence Williams <lnawms@yahoo.com> wrote:
>
>
> Because of the unrest in the Middle East and Crimea, economic malaise,
global warming and the volatility of bitcoins, I am so overwrought that I
have not been able to discharge the duties of TC for several months. I think
it is only fair that I relinquish my post so that someone else can take
over.
>
> I stepped up to the position after Chris Eggsgard passed away and have
proudly carried on in his tradition ever since. He was a man who loved the
beauty and simplicity of Mr. Pietenpol's design and would tolerate no
lookalikes. The very mention of the name Grega or GN-1 would incur his wrath
and it was frightening to behold. I never heard him utter the phrase " There
is no such thing as a stupid question", believing that a certain amount of
rational thinking was a prerequisite to attempting the task of recreating
the classic design.
>
> Hopefully someone with a sharp pen and tongue as well as a penchant for
keeping the marque pure will step up to fill Chris's shoes. Touchy-feely
political correctness is not a prerequisite for this position!
>
> In the future I will simply be:
> Larry Williams the Abominable Slowman
> N899LW
>
>
>
>
>
Message 6
INDEX | Back to Main INDEX |
PREVIOUS | Skip to PREVIOUS Message |
NEXT | Skip to NEXT Message |
LIST | Reply to LIST Regarding this Message |
SENDER | Reply to SENDER Regarding this Message |
|
Subject: | 6061 tail hinges |
My Dad, now 88, is keeping the project alive building the tail parts.
Here's the hinges he just finished using 6061 aluminum. He built a mockup
first to make sure everything would fit.
Has anyone done them like this? Any see any potential issues?
Thanks!
Ken
Message 7
INDEX | Back to Main INDEX |
PREVIOUS | Skip to PREVIOUS Message |
NEXT | Skip to NEXT Message |
LIST | Reply to LIST Regarding this Message |
SENDER | Reply to SENDER Regarding this Message |
|
Subject: | Re: Scimitar propeller drawings |
Vasek,
I will send you the specs on mine in a private email. Got to do a little hu
nting for it.
Dan Helsper
Puryear, TN
-----Original Message-----
From: Vasek <bigon2@seznam.cz>
Sent: Mon, Mar 3, 2014 11:55 am
Subject: Pietenpol-List: Scimitar propeller drawings
In case I would decide to carve my own propeller, would it be possible to o
btain
drawings for a scimitar or any other nice propeller for a Piet?
Or could you direct me some place where these plans are available, if there
are
any?
Thank you,
Vasek
--------
My production of WW1 propellers, trophies and constructions:
=C3=A2=C2=88=C2=BC
Read this topic online here:
http://forums.matronics.com/viewtopic.php?p=419727#419727
Message 8
INDEX | Back to Main INDEX |
PREVIOUS | Skip to PREVIOUS Message |
NEXT | Skip to NEXT Message |
LIST | Reply to LIST Regarding this Message |
SENDER | Reply to SENDER Regarding this Message |
|
YEAH! Newsletter arrived yesterday. Thanks again, John
Barry
NX973BP
-----Original Message-----
From: owner-pietenpol-list-server@matronics.com
[mailto:owner-pietenpol-list-server@matronics.com] On Behalf Of GNflyer
Sent: Monday, March 03, 2014 8:38 PM
Subject: Pietenpol-List: Re: newsletter
haven't seen mine yet either- sent dues in last fall and wondered if I
slipped rough the cracks. Raymond- Skellytown Tx
Read this topic online here:
http://forums.matronics.com/viewtopic.php?p=419746#419746
Message 9
INDEX | Back to Main INDEX |
PREVIOUS | Skip to PREVIOUS Message |
NEXT | Skip to NEXT Message |
LIST | Reply to LIST Regarding this Message |
SENDER | Reply to SENDER Regarding this Message |
|
Can someone point me to the newsletter address=2C I need to renew.
> From: bed@mindspring.com
> To: pietenpol-list@matronics.com
> Subject: RE: Pietenpol-List: Re: newsletter
> Date: Tue=2C 4 Mar 2014 12:27:54 -0500
>
>
> YEAH! Newsletter arrived yesterday. Thanks again=2C John
> Barry
> NX973BP
>
> -----Original Message-----
> From: owner-pietenpol-list-server@matronics.com
> [mailto:owner-pietenpol-list-server@matronics.com] On Behalf Of GNflyer
> Sent: Monday=2C March 03=2C 2014 8:38 PM
> To: pietenpol-list@matronics.com
> Subject: Pietenpol-List: Re: newsletter
>
>
> haven't seen mine yet either- sent dues in last fall and wondered if I
> slipped rough the cracks. Raymond- Skellytown Tx
>
>
>
>
> Read this topic online here:
>
> http://forums.matronics.com/viewtopic.php?p=419746#419746
>
>
>
>
>
>
>
>
>
>
>
===========
===========
===========
===========
>
>
>
Message 10
INDEX | Back to Main INDEX |
PREVIOUS | Skip to PREVIOUS Message |
NEXT | Skip to NEXT Message |
LIST | Reply to LIST Regarding this Message |
SENDER | Reply to SENDER Regarding this Message |
|
Subject: | Re: Egad!! The Top Curmudgeon has abdicated! |
Global warming? What global warming? I'm just not seeing it...
I just drove ACROSS a lake! On a two lane highway.
Tools, freezing in WI, thinking about enclosing the cockpit, adding a heater and
fake sheepskin seating
Read this topic online here:
http://forums.matronics.com/viewtopic.php?p=419783#419783
Message 11
INDEX | Back to Main INDEX |
PREVIOUS | Skip to PREVIOUS Message |
NEXT | Skip to NEXT Message |
LIST | Reply to LIST Regarding this Message |
SENDER | Reply to SENDER Regarding this Message |
|
http://lmgtfy.com/?q=brodhead+pietenpol+association+newsletter&l=1
> Can someone point me to the newsletter address, I need to renew.
Read this topic online here:
http://forums.matronics.com/viewtopic.php?p=419784#419784
Message 12
INDEX | Back to Main INDEX |
PREVIOUS | Skip to PREVIOUS Message |
NEXT | Skip to NEXT Message |
LIST | Reply to LIST Regarding this Message |
SENDER | Reply to SENDER Regarding this Message |
|
Subject: | 6061 tail hinges |
Nice idea. I found a similar design that I will use from an old Newsletter.
1" and 3/4" 4130 square tubing. Cut one side off & the 3/4 nests inside t
he 1". Cut/drill/shape the necessary pieces. Connect with clevis pin. There
was a caution that at least one hinge half should be inset into the wood t
o prevent swiveling. I thought of using AL=2C but considered that it might
be too soft for control hinge durability.
Lorenzo
Subject: Pietenpol-List: 6061 tail hinges
From: ken.riffic@gmail.com
My Dad=2C now 88=2C is keeping the project alive building the tail parts.
Here's the hinges he just finished using 6061 aluminum. He built a mockup f
irst to make sure everything would fit.=0A
Has anyone done them like this? Any see any potential issues?
Thanks!
Ken
Message 13
INDEX | Back to Main INDEX |
PREVIOUS | Skip to PREVIOUS Message |
NEXT | Skip to NEXT Message |
LIST | Reply to LIST Regarding this Message |
SENDER | Reply to SENDER Regarding this Message |
|
Subject: | Re: Egad!! The Top Curmudgeon has abdicated! |
=0A=0A=0ATools, =0AI support Global Warming after this winter! Where in the
Frozen Tundra are you?=0ABob=0A=0A =0A=0A-=0A=0AGlobal warming?- What
global warming?- I'm just not seeing it...=0A=0AI just drove ACROSS a lak
e!- On a two lane highway.=0A=0ATools, freezing in WI, thinking about enc
losing the cockpit, adding a heater and fake sheepskin seating=0A=0A=0A=0A
=0ARead this topic online here:=0A=0Ahttp://forums.matronics.com/viewtopic.
- - - - - - - - - - - - - -Matt Dralle, List Adm
=====
Message 14
INDEX | Back to Main INDEX |
PREVIOUS | Skip to PREVIOUS Message |
NEXT | Skip to NEXT Message |
LIST | Reply to LIST Regarding this Message |
SENDER | Reply to SENDER Regarding this Message |
|
Wow that was cool=2C thanks.
Craig
> Subject: Pietenpol-List: Re: newsletter
> From: billspiet@sympatico.ca
> Date: Tue=2C 4 Mar 2014 10:11:13 -0800
> To: pietenpol-list@matronics.com
>
ca>
>
> http://lmgtfy.com/?q=brodhead+pietenpol+association+newsletter&l=1
>
>
> > Can someone point me to the newsletter address=2C I need to renew.
>
>
>
>
>
> Read this topic online here:
>
> http://forums.matronics.com/viewtopic.php?p=419784#419784
>
>
>
>
>
>
>
===========
===========
===========
===========
>
>
>
Message 15
INDEX | Back to Main INDEX |
PREVIOUS | Skip to PREVIOUS Message |
NEXT | Skip to NEXT Message |
LIST | Reply to LIST Regarding this Message |
SENDER | Reply to SENDER Regarding this Message |
|
Subject: | Re: Egad!! The Top Curmudgeon has abdicated! |
Only those that have travelled in formation with the Abominal Sloman can fully
appreciate the new name of the character formally known as T.C. Very well deserved
and appropriate.
Although I built a Continental powered ship, I would like to sit on Dan's committee
if he assumes his new position.
Don Emch
NX899DE
Read this topic online here:
http://forums.matronics.com/viewtopic.php?p=419793#419793
Message 16
INDEX | Back to Main INDEX |
PREVIOUS | Skip to PREVIOUS Message |
NEXT | Skip to NEXT Message |
LIST | Reply to LIST Regarding this Message |
SENDER | Reply to SENDER Regarding this Message |
|
Subject: | Re: Scimitar propeller drawings |
Thank you very much Dan, I am looking forward to the mail [Wink]
You have the prop on Ford A, right?
--------
My production of WW1 propellers, trophies and constructions:
Read this topic online here:
http://forums.matronics.com/viewtopic.php?p=419795#419795
Message 17
INDEX | Back to Main INDEX |
PREVIOUS | Skip to PREVIOUS Message |
NEXT | Skip to NEXT Message |
LIST | Reply to LIST Regarding this Message |
SENDER | Reply to SENDER Regarding this Message |
|
Subject: | Re: Egad!! The Top Curmudgeon has abdicated! |
Gentlemen,
I am not sure any one man is quite capable of filling the distinguished and
eminent shoes, of the consummate and magnanimous Top Curmudgeon, Lawrence
V. Williams. Not to mention that I had to look up the definition of acerbic
. Heck, I don't even have half the credentials behind my name either. The o
nly thing I do have going for me is the fact that I am in sole possession o
f the BHP "secret" papers. I will have to admit that these papers do contai
n a wealth of Bernerd's knowledge and, private, previously-unpublished pond
erings on many subjects. I was entrusted with these a few years ago by the
elusive and imponderable John (don't spell it Racine) Recine. Where he got
them I do not know. At any rate I was sworn to uphold the tradition of only
making these available once annually, during the month of May.
I would be honored to serve on a revue board, in equal capacity and authori
ty, with the other members, the qualifications for which are contained in t
he "papers". So as previously mentioned, we will have to wait a couple of m
onths for those to be revealed.
Yours,
Dan Helsper
Puryear, TN
cc: TC
-----Original Message-----
From: Don Emch <EmchAir@aol.com>
Sent: Tue, Mar 4, 2014 3:58 pm
Subject: Pietenpol-List: Re: Egad!! The Top Curmudgeon has abdicated!
Only those that have travelled in formation with the Abominal Sloman can fu
lly
appreciate the new name of the character formally known as T.C. Very well
deserved and appropriate.
Although I built a Continental powered ship, I would like to sit on Dan's
committee if he assumes his new position.
Don Emch
NX899DE
Read this topic online here:
http://forums.matronics.com/viewtopic.php?p=419793#419793
Message 18
INDEX | Back to Main INDEX |
PREVIOUS | Skip to PREVIOUS Message |
NEXT | Skip to NEXT Message |
LIST | Reply to LIST Regarding this Message |
SENDER | Reply to SENDER Regarding this Message |
|
Subject: | Re: 6061 tail hinges |
Ken,
For some reason, I can't see your posts or your hinge photos. Can you please repost?
Thanks.
--------
Semper Fi,
Terry Hand
Athens, GA
Read this topic online here:
http://forums.matronics.com/viewtopic.php?p=419798#419798
Message 19
INDEX | Back to Main INDEX |
PREVIOUS | Skip to PREVIOUS Message |
NEXT | Skip to NEXT Message |
LIST | Reply to LIST Regarding this Message |
SENDER | Reply to SENDER Regarding this Message |
|
Subject: | Re: The Top Curmudgeon has abdicated! |
Do it for the men lost over Macho Grande, because this is a different kind
of flying, all togeather.=0A=0A=0A=0A________________________________=0AFro
m: "Cuy, Michael D. (GRC-RXD0)[Vantage Partners, LLC]" <michael.d.cuy@nasa.
gov>=0ATo: "pietenpol-list@matronics.com" <pietenpol-list@matronics.com>
=0ASent: Tuesday, March 4, 2014 10:48 AM=0ASubject: Pietenpol-List: The Top
Curmudgeon has abdicated!=0A=0A=0A=0ALarry, Larry, Larry-----all Pietenpol
s are snowflakes, don=99t you know that by now you veteran Pietenpole
r?=C2-=C2-=C2-=C2- No two are alike Larry, kinda like you and Chris
=0AEggsgard.=C2-=C2- (thank GodJ)!=C2-=C2-=C2- A GN-1 is just lik
e a Pietenpol only different.=C2-=C2-=C2-=C2- We know down deep you
are a very touchy-feely kind of guy and secretly love=0Aall the different
non-Pietenpol plan modifications and =98new=99 ideas.=C2-=C2
-=C2- Being a grandparent is making it hard for you to be a Top Curmude
gon lately----we understand=0Abut I personally still think you have it in y
ou.=C2-=C2-=C2- We need a Vince Lombardi kind of tough guy to keep th
e Pietenpol purist faction alive.=C2-=C2-=C2-=C2- Don=99t pas
s the torch Larry----=0Adig your heels in and win one for George Zip
..win one for the Zipper.
Message 20
INDEX | Back to Main INDEX |
PREVIOUS | Skip to PREVIOUS Message |
NEXT | Skip to NEXT Message |
LIST | Reply to LIST Regarding this Message |
SENDER | Reply to SENDER Regarding this Message |
|
Subject: | Re: The Top Curmudgeon has abdicated! |
We're all counting on you.
On Mar 4, 2014, at 7:34 PM, shad bell <aviatorbell@yahoo.com> wrote:
> Do it for the men lost over Macho Grande, because this is a different
kind of flying, all togeather.
>
> From: "Cuy, Michael D. (GRC-RXD0)[Vantage Partners, LLC]"
<michael.d.cuy@nasa.gov>
> To: "pietenpol-list@matronics.com" <pietenpol-list@matronics.com>
> Sent: Tuesday, March 4, 2014 10:48 AM
> Subject: Pietenpol-List: The Top Curmudgeon has abdicated!
>
> Larry, Larry, Larry-----all Pietenpols are snowflakes, don=92t you
know that by now you veteran Pietenpoler? No two are alike Larry,
kinda like you and Chris
> Eggsgard. (thank GodJ)! A GN-1 is just like a Pietenpol only
different. We know down deep you are a very touchy-feely kind of guy
and secretly love
> all the different non-Pietenpol plan modifications and =91new=92
ideas. Being a grandparent is making it hard for you to be a Top
Curmudegon lately----we understand
> but I personally still think you have it in you. We need a Vince
Lombardi kind of tough guy to keep the Pietenpol purist faction alive.
Don=92t pass the torch Larry----
> dig your heels in and win one for George Zip=85..win one for the
Zipper.
>
> <Picture (Device Independent Bitmap) 1.jpg>
Message 21
INDEX | Back to Main INDEX |
PREVIOUS | Skip to PREVIOUS Message |
NEXT | Skip to NEXT Message |
LIST | Reply to LIST Regarding this Message |
SENDER | Reply to SENDER Regarding this Message |
|
Subject: | Re: The Top Curmudgeon has abdicated! |
Win one for the Zipper.
Sent from my iPhone
> On Mar 4, 2014, at 5:44 PM, John Hofmann <jhofmann@reesgroupinc.com> wrote
:
>
> We're all counting on you.
>
>
>> On Mar 4, 2014, at 7:34 PM, shad bell <aviatorbell@yahoo.com> wrote:
>>
>> Do it for the men lost over Macho Grande, because this is a different kin
d of flying, all togeather.
>>
>> From: "Cuy, Michael D. (GRC-RXD0)[Vantage Partners, LLC]" <michael.d.cuy@
nasa.gov>
>> To: "pietenpol-list@matronics.com" <pietenpol-list@matronics.com>
>> Sent: Tuesday, March 4, 2014 10:48 AM
>> Subject: Pietenpol-List: The Top Curmudgeon has abdicated!
>>
>> Larry, Larry, Larry-----all Pietenpols are snowflakes, don=99t you k
now that by now you veteran Pietenpoler? No two are alike Larry, kinda l
ike you and Chris
>> Eggsgard. (thank GodJ)! A GN-1 is just like a Pietenpol only differe
nt. We know down deep you are a very touchy-feely kind of guy and secret
ly love
>> all the different non-Pietenpol plan modifications and =98new
=99 ideas. Being a grandparent is making it hard for you to be a Top Curm
udegon lately----we understand
>> but I personally still think you have it in you. We need a Vince Lomba
rdi kind of tough guy to keep the Pietenpol purist faction alive. Don
=99t pass the torch Larry----
>> dig your heels in and win one for George Zip..win one for the Zi
pper.
>>
>> <Picture (Device Independent Bitmap) 1.jpg>
>
>
>
3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3
D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D
=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D
3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3
D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D
=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D
3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3
D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D
=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D
3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3
D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D
=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D
>
Message 22
INDEX | Back to Main INDEX |
PREVIOUS | Skip to PREVIOUS Message |
NEXT | Skip to NEXT Message |
LIST | Reply to LIST Regarding this Message |
SENDER | Reply to SENDER Regarding this Message |
|
Subject: | Re: Egad!! The Top Curmudgeon has abdicated! |
Bob, I'm in Oshkosh. I did drive across Winnebago last week! Really, just because
I could. Never done that before. I, too, support global warming.
Dan, hmmm.... considering something must be done, I guess I shall nominate you
to chair the board. Let the cards fall where they may once you have your committee.
Larry can be TC emeritus...
Seconds?
Read this topic online here:
http://forums.matronics.com/viewtopic.php?p=419802#419802
Message 23
INDEX | Back to Main INDEX |
PREVIOUS | Skip to PREVIOUS Message |
NEXT | Skip to NEXT Message |
LIST | Reply to LIST Regarding this Message |
SENDER | Reply to SENDER Regarding this Message |
|
Subject: | Re: Egad!! The Top Curmudgeon has abdicated! |
I second your nomination.
A kinder, gentler TC? Or is that an oxymoron?
--------
Semper Fi,
Terry Hand
Athens, GA
Read this topic online here:
http://forums.matronics.com/viewtopic.php?p=419803#419803
Message 24
INDEX | Back to Main INDEX |
PREVIOUS | Skip to PREVIOUS Message |
NEXT | Skip to NEXT Message |
LIST | Reply to LIST Regarding this Message |
SENDER | Reply to SENDER Regarding this Message |
|
Subject: | Re: Egad!! The Top Curmudgeon has abdicated! |
tools wrote:
> Bob, I'm in Oshkosh. I did drive across Winnebago last week! Really, just because
I could. Never done that before. I, too, support global warming.
>
> ....
You mean all the way across Lake Winnebago from Oshkosh to the eastern shoreline?
[Shocked]
You could only have topped that by flying across in your A65 powered Air Camper
on one of those days below -20 F.
(That oughta learn ya - If you had gone with the Model A and the original radiator
arrangement, you could have had a warm breeze on your face. [Laughing] )
--------
Bill Frank
Read this topic online here:
http://forums.matronics.com/viewtopic.php?p=419804#419804
Message 25
INDEX | Back to Main INDEX |
PREVIOUS | Skip to PREVIOUS Message |
NEXT | Skip to NEXT Message |
LIST | Reply to LIST Regarding this Message |
SENDER | Reply to SENDER Regarding this Message |
|
Subject: | Re: The Top Curmudgeon has abdicated! |
Shirley you can't be serious.
Read this topic online here:
http://forums.matronics.com/viewtopic.php?p=419805#419805
Message 26
INDEX | Back to Main INDEX |
PREVIOUS | Skip to PREVIOUS Message |
NEXT | Skip to NEXT Message |
LIST | Reply to LIST Regarding this Message |
SENDER | Reply to SENDER Regarding this Message |
|
Subject: | Re: The Top Curmudgeon has abdicated! |
Don't call him Shirley
Sent from my iPhone
> On Mar 4, 2014, at 8:37 PM, "Bill Church" <billspiet@sympatico.ca> wrote:
>
>
> Shirley you can't be serious.
>
>
>
>
> Read this topic online here:
>
> http://forums.matronics.com/viewtopic.php?p=419805#419805
>
>
>
>
>
>
>
>
>
>
Message 27
INDEX | Back to Main INDEX |
PREVIOUS | Skip to PREVIOUS Message |
NEXT | Skip to NEXT Message |
LIST | Reply to LIST Regarding this Message |
SENDER | Reply to SENDER Regarding this Message |
|
Subject: | Re: Scimitar propeller drawings |
Dan;
It seems that nobody else is talking about the elephant in the room, so I guess
I will. In that picture showing your tall, dark, and handsome scimitar prop
why does it look like your engine mount is sort of sashayed to the port side of
your airplane? And I mean not just a little bit, but maybe 2-3"?
--------
Oscar Zuniga
Medford, OR
Air Camper NX41CC "Scout"
A75 power
Read this topic online here:
http://forums.matronics.com/viewtopic.php?p=419807#419807
Message 28
INDEX | Back to Main INDEX |
PREVIOUS | Skip to PREVIOUS Message |
NEXT | Skip to NEXT Message |
LIST | Reply to LIST Regarding this Message |
SENDER | Reply to SENDER Regarding this Message |
|
Subject: | Re: The Top Curmudgeon has abdicated! |
How about Sue?
Clif
Always remember to go to other people's funerals.
Otherwise, they might not come to yours.
Yogi Berra
>
> Don't call him Shirley
>
> Sent from my iPhone
>
>>
>> Shirley you can't be serious.
>>
Message 29
INDEX | Back to Main INDEX |
PREVIOUS | Skip to PREVIOUS Message |
NEXT | Skip to NEXT Message |
LIST | Reply to LIST Regarding this Message |
SENDER | Reply to SENDER Regarding this Message |
|
Subject: | Re: 6061 tail hinges |
Are these the mock-up ones?
If not they have to be fine filed smooth, all edges
rounded off, ALL scratches removed and then
fine sanded to a polish.
Clif
Here's the hinges he just finished using 6061 aluminum. He built a
mockup first to make sure everything would fit.
Has anyone done them like this? Any see any potential issues?
Thanks!
Ken
-------------------------------------------------------------------------
-----
No virus found in this message.
Checked by AVG - www.avg.com
03/04/14
Other Matronics Email List Services
These Email List Services are sponsored solely by Matronics and through the generous Contributions of its members.
-- Please support this service by making your Contribution today! --
|