---------------------------------------------------------- Pietenpol-List Digest Archive --- Total Messages Posted Wed 04/23/14: 18 ---------------------------------------------------------- Today's Message Index: ---------------------- 1. 04:17 AM - Re: question for Canadians (off topic) (Brian Kenney) 2. 05:24 AM - Re: Re: Mag needed for an A75 (Michael Perez) 3. 05:40 AM - Perez's Build Status (Michael Perez) 4. 08:43 AM - Re: Re: Mag needed for an A75 (Steven Dortch) 5. 08:46 AM - Re: Mag needed for an A75 (Don Emch) 6. 09:56 AM - this is what makes this list so valuable (Cuy, Michael D. (GRC-RXD0)[Vantage Partners, LLC]) 7. 10:05 AM - Re: Re: Mag needed for an A75 (Jack Phillips) 8. 10:24 AM - Re: this is what makes this list so valuable (Greg Bacon) 9. 10:35 AM - Re: Mag needed for an A75 (Don Emch) 10. 10:58 AM - Re: Re: Mag needed for an A75 (Jack Phillips) 11. 11:47 AM - Rudder horns (flygirl Mason) 12. 05:21 PM - nice Piets for sale (Douwe Blumberg) 13. 05:58 PM - Re: nice Piets for sale (Bill Church) 14. 06:39 PM - Re: Rudder horns (shad bell) 15. 07:02 PM - Re: Re: nice Piets for sale (jim hyde) 16. 07:29 PM - Re: Re: nice Piets for sale (Boatright, Jeffrey) 17. 08:47 PM - Re: Perez's Build Status (aerocarjake) 18. 08:47 PM - Re: Re: nice Piets for sale (Clif Dawson) ________________________________ Message 1 _____________________________________ Time: 04:17:39 AM PST US From: Brian Kenney Subject: RE: Pietenpol-List: question for Canadians (off topic) you don't have to pay hst unless it is from a business and then it should b e refundable at the border. The only taxes you pay should be to your own c ountry. > Subject: Pietenpol-List: question for Canadians (off topic) > From: taildrags@hotmail.com > Date: Tue=2C 22 Apr 2014 21:14:57 -0700 > To: pietenpol-list@matronics.com > > > A theoretical question for any of you who might be able to help me unders tand the HST (sales tax). Let's say I buy an airplane from a guy in Ontari o. He de-registers the Canadian-registered aircraft and I bring it to the U.S. > > Forget the registration business... what I'm wondering is=2C when does th e HST come into play? To whom is it paid=2C and when? If I hand him some money and drive away with the airplane without any further paperwork or act ion=2C will U.S. Customs ask me for a bill of sale and proof of payment of HST on the purchase? If a tree falls in the woods and nobody is there to h ear it=2C does it make any noise? =3Bo) > > Theoretical=2C purely theoretical. Thanks. > > -------- > Oscar Zuniga > Medford=2C OR > Air Camper NX41CC "=3BScout"=3B > A75 power > > > > > Read this topic online here: > > http://forums.matronics.com/viewtopic.php?p=422285#422285 > > > > > > > =========== =========== =========== =========== > > > ________________________________ Message 2 _____________________________________ Time: 05:24:30 AM PST US From: Michael Perez Subject: Re: Pietenpol-List: Re: Mag needed for an A75 Thanks Oscar. When the day comes that I have the time to do the overhaul, I 'll do some more indepth searching. I did at one point have a contact for m ag parts here in Ohio, a tractor guy.--=0A-=0A=0AIf God is your co-pi lot...switch seats. =0AMike Perez =0AKaretaker Aero =0ASTILL Building...=0A ________________________________ Message 3 _____________________________________ Time: 05:40:30 AM PST US From: Michael Perez Subject: Pietenpol-List: Perez's Build Status Crew, I just wanted to give the list an update as to what is going on with my build. This coming July will mark the 6th year of construction and as of late, I have been slacking in my progress. I can point to the usual culpri ts: life happens, too cold, too hot, holidays, etc. truth is, I have been l azy.- However, I have found my second wind and am as motivated now as I w as during week one almost 6 years ago. =0A=0A=0AMy new plan is to finish th e items I can in my shop. Than move the plane out into the garage for compl ete assembly and an initial W&B. I need it assembled to fabricate the last few items and it will be nice to FINALLY see it all together as one unit! - The first engine run will also take place at some point as well as a ni ce photo shoot of the assembled plane. About the only thing I can think of NOT doing is the covering of the gaps between the wings and C.S. as these w ill be glued fabric and I'll need to disassemble to transport to a hangar.. .once found. I hope to have this all done prior to our next winter. There I S a light at the end of the tunnel!- (something I thought would never hap pen)=0A=0AThe final push is on.=0A=0A=0AIf God is your co-pilot...switch se ats. =0AMike Perez =0AKaretakerAero=0ASTILL Building... =0A ________________________________ Message 4 _____________________________________ Time: 08:43:09 AM PST US Subject: Re: Pietenpol-List: Re: Mag needed for an A75 From: Steven Dortch > > A buddy bought new Slick Mags, the only new FAA approved MAGs on the > market, and they cost him $2400! compleate with harnesses and sparkplugs. > Sure did start easy once we got it timed. Blue Skies, Steve D > > ________________________________ Message 5 _____________________________________ Time: 08:46:50 AM PST US Subject: Pietenpol-List: Re: Mag needed for an A75 From: "Don Emch" Greg, I've had 2 Bendix SF4's rebuilt by Fresno Airparts. One was a year and a half ago and the other was about 2 weeks ago. Both of them were fantastic. Practically a new magneto when they were done. New bearings, points, gears, everything. Both of them had somewhere around 50 new parts replaced. Fantastic. The one from a year and a half ago is running great with probably 70 hours on it. They overhauled them the day after they arrived and sent them out the next day, so the turn around was terrific. They charge a flat $425.00 each. Plus about $20 shipping. Can't say enough good about them! Fresno Airparts 559-237-4863 No credit card. You'd need to send a check with the magneto. Don Emch NX899DE Read this topic online here: http://forums.matronics.com/viewtopic.php?p=422297#422297 ________________________________ Message 6 _____________________________________ Time: 09:56:50 AM PST US From: "Cuy, Michael D. (GRC-RXD0)[Vantage Partners, LLC]" Subject: Pietenpol-List: this is what makes this list so valuable Right here below. Once every 25 or 30 posts there is a gem like this. Thanks to Don Emch we now ALL have some good, solid information that is als o a great cost savings for what others charge for mag overhauls. I've been dealing with Fresno Airparts for over 18 years and I never knew t hey rebuilt magnetos, let alone had such stellar turn-around times. This is just fantastic info Don----thank you for taking time to post it. Mike C. Ohio Greg, I've had 2 Bendix SF4's rebuilt by Fresno Airparts. One was a year and a h alf ago and the other was about 2 weeks ago. Both of them were fantastic. Practically a new magneto when they were done. New bearings, points, gear s, everything. Both of them had somewhere around 50 new parts replaced. Fa ntastic. The one from a year and a half ago is running great with probably 70 hours on it. They overhauled them the day after they arrived and sent them out the next day, so the turn around was terrific. They charge a flat $425.00 each. Plus about $20 shipping. Can't say enough good about them! Fresno Airparts 559-237-4863 No credit card. You'd need to send a check with the magneto. Don Emch NX899DE ________________________________ Message 7 _____________________________________ Time: 10:05:04 AM PST US From: "Jack Phillips" Subject: RE: Pietenpol-List: Re: Mag needed for an A75 Correction, Don. I bought my new oil pump parts from Fresno Airparts last week and they now have moved into the 21st century and now take credit cards. And I agree about their customer service. I got my parts in 3 days. Jack Phillips NX899JP Smith Mountain Lake, Virginia -----Original Message----- From: owner-pietenpol-list-server@matronics.com [mailto:owner-pietenpol-list-server@matronics.com] On Behalf Of Don Emch Sent: Wednesday, April 23, 2014 11:46 AM Subject: Pietenpol-List: Re: Mag needed for an A75 Greg, I've had 2 Bendix SF4's rebuilt by Fresno Airparts. One was a year and a half ago and the other was about 2 weeks ago. Both of them were fantastic. Practically a new magneto when they were done. New bearings, points, gears, everything. Both of them had somewhere around 50 new parts replaced. Fantastic. The one from a year and a half ago is running great with probably 70 hours on it. They overhauled them the day after they arrived and sent them out the next day, so the turn around was terrific. They charge a flat $425.00 each. Plus about $20 shipping. Can't say enough good about them! Fresno Airparts 559-237-4863 No credit card. You'd need to send a check with the magneto. Don Emch NX899DE Read this topic online here: http://forums.matronics.com/viewtopic.php?p=422297#422297 ________________________________ Message 8 _____________________________________ Time: 10:24:25 AM PST US Subject: Re: Pietenpol-List: this is what makes this list so valuable From: Greg Bacon Thanks Mike and Don!! On Wed, Apr 23, 2014 at 11:53 AM, Cuy, Michael D. (GRC-RXD0)[Vantage Partners, LLC] wrote: > Right here below. Once every 25 or 30 posts there is a gem like this. > Thanks to Don Emch we now ALL have some good, solid information that is > also a great cost savings for what others charge for mag overhauls. > I=99ve been dealing with Fresno Airparts for over 18 years and I ne ver knew > they rebuilt magnetos, let alone had such stellar turn-around times. > This is just fantastic info Don----thank you for taking time to post it. > > Mike C. > Ohio > > > Greg, > > I've had 2 Bendix SF4's rebuilt by Fresno Airparts. One was a year and a > half ago and the other was about 2 weeks ago. Both of them were > fantastic. Practically a new magneto when they were done. New bearings, > points, gears, everything. Both of them had somewhere around 50 new parts > replaced. Fantastic. The one from a year and a half ago is running grea t > with probably 70 hours on it. They overhauled them the day after they > arrived and sent them out the next day, so the turn around was terrific. > They charge a flat $425.00 each. Plus about $20 shipping. Can't say > enough good about them! > > Fresno Airparts > 559-237-4863 > No credit card. You'd need to send a check with the magneto. > > Don Emch > NX899DE > > > * > =========== .matronics.com/Navigator?Pietenpol-List> =========== =========== om/contribution> =========== > > * > > -- Greg Bacon Prairie Home, MO NX114D(Mountain Piet) ________________________________ Message 9 _____________________________________ Time: 10:35:27 AM PST US Subject: Pietenpol-List: Re: Mag needed for an A75 From: "Don Emch" Wow Jack! I never thought they'd do that! Thanks for the heads up! Don Emch NX899DE Read this topic online here: http://forums.matronics.com/viewtopic.php?p=422303#422303 ________________________________ Message 10 ____________________________________ Time: 10:58:33 AM PST US From: "Jack Phillips" Subject: RE: Pietenpol-List: Re: Mag needed for an A75 They even answer emails now! Jack Phillips NX899JP Smith Mountain Lake, Virginia -----Original Message----- From: owner-pietenpol-list-server@matronics.com [mailto:owner-pietenpol-list-server@matronics.com] On Behalf Of Don Emch Sent: Wednesday, April 23, 2014 1:35 PM Subject: Pietenpol-List: Re: Mag needed for an A75 Wow Jack! I never thought they'd do that! Thanks for the heads up! Don Emch NX899DE Read this topic online here: http://forums.matronics.com/viewtopic.php?p=422303#422303 ________________________________ Message 11 ____________________________________ Time: 11:47:41 AM PST US Subject: Pietenpol-List: Rudder horns From: flygirl Mason Any Piet flyers have rudder horns installed under the horizontal stab? If so, works fine? Any structural considerations? Thanks, builder in Oregon Bill ________________________________ Message 12 ____________________________________ Time: 05:21:09 PM PST US From: "Douwe Blumberg" Subject: Pietenpol-List: nice Piets for sale Hey all, Wow, it's been quiet here. I have another fun adventure to share later. In the meantime.. What Piets are for sale these days? I have a friend whom might be looking for a nice one. Wants a continental-powered, and a nice, flying plane. Douwe ________________________________ Message 13 ____________________________________ Time: 05:58:26 PM PST US Subject: Pietenpol-List: Re: nice Piets for sale From: "Bill Church" here's a starting point: http://pietenpols.org/id16.html Read this topic online here: http://forums.matronics.com/viewtopic.php?p=422311#422311 ________________________________ Message 14 ____________________________________ Time: 06:39:56 PM PST US From: shad bell Subject: Re: Pietenpol-List: Rudder horns We have ours at the bottom, no problems so far, 360 hrs or so.- I talked Dad into it when we were building, just thought it looked cleaner.- I Kno w the horn in the middle distributes the torque/twisting load a little more evenly, on the flimsy rudder structure, but she is holding together ok.- The top rudder hinge is-starting to get-a little slop in it now, could be attributed, but it is the same as the outer elevator hinges- (Vi Kapl er cast hinges), so it might have been a hinge line misalignment, or just a design flaw of a steel hinge pin in an aluminum casting.=0A-=0AShad=0AOn Wednesday, April 23, 2014 2:54 PM, flygirl Mason wr otmail.com>=0A=0AAny Piet flyers have rudder horns installed under the hori zontal stab?=0AIf so, works fine? Any structural considerations?=0AThanks, == ________________________________ Message 15 ____________________________________ Time: 07:02:48 PM PST US From: jim hyde Subject: Re: Pietenpol-List: Re: nice Piets for sale what does the word might mean? is he looking for a piet or not? I keep read ing reading might in this news letter. the word might means nothing. a coup le of months ago another fellow thought that he might sell his piet. he sai d that word might several times. I never could figure out what the fucker w as talking about.=0A=0Ajim-=0AOn Wednesday, April 23, 2014 8:06 PM, Bill Church wrote:=0A =0A--> Pietenpol-List message po sted by: "Bill Church" =0A=0Ahere's a starting poin t:=0A=0Ahttp://pietenpols.org/id16.html=0A=0A=0A=0A=0ARead this topic onlin e here:=0A=0Ahttp://forums.matronics.com/viewtopic.php?p=422311#422311=0A ======================== ________________________________ Message 16 ____________________________________ Time: 07:29:48 PM PST US From: "Boatright, Jeffrey" Subject: Re: Pietenpol-List: Re: nice Piets for sale Filters, Jim, filters. -- Jeffrey H. Boatright, PhD, FARVO Associate Professor of Ophthalmology Emory University School of Medicine From: jim hyde > >" > etenpol-list@matronics.com> Subject: Re: Pietenpol-List: Re: nice Piets for sale what does the word might mean? is he looking for a piet or not? I keep read ing reading might in this news letter. the word might means nothing. a coup le of months ago another fellow thought that he might sell his piet. he sai d that word might several times. I never could figure out what the fucker w as talking about. jim On Wednesday, April 23, 2014 8:06 PM, Bill Church > wrote: > here's a starting point: http://pietenpols.org/id16.html Read this topic online here: http://forums.matronics.com/viewtopic.php?p=422311#422====== ==================http://www.matronics. com/Navigat - MATRONICS WEB FORUMS -<= --> m/Navigator?Pietenpol-List ________________________________ This e-mail message (including any attachments) is for the sole use of the intended recipient(s) and may contain confidential and privileged information. If the reader of this message is not the intended recipient, you are hereby notified that any dissemination, distribution or copying of this message (including any attachments) is strictly prohibited. If you have received this message in error, please contact the sender by reply e-mail message and destroy all copies of the original message (including attachments). ________________________________ Message 17 ____________________________________ Time: 08:47:39 PM PST US Subject: Pietenpol-List: Re: Perez's Build Status From: "aerocarjake" Thanks.... I am also finding that I get stalled as well. Seems crazy what little steps seem to stall me - which small things are tough to move past. Such is the case of a long-term project I guess..... -------- Jake Schultz - curator, Newport Way Air Museum (OK, it's just my home) Read this topic online here: http://forums.matronics.com/viewtopic.php?p=422315#422315 ________________________________ Message 18 ____________________________________ Time: 08:47:40 PM PST US From: "Clif Dawson" Subject: Re: Pietenpol-List: Re: nice Piets for sale Doc Martin Clif Lord, grant me the strength to accept what I cannot change, the strength to change what I can and the wisdom to hide the bodies of those who REALLY pissed me off! Filters, Jim, filters. -- Jeffrey H. Boatright, PhD, FARVO Associate Professor of Ophthalmology Emory University School of Medicine Subject: Re: Pietenpol-List: Re: nice Piets for sale what does the word might mean? is he looking for a piet or not? I keep reading reading might in this news letter. the word might means nothing. a couple of months ago another fellow thought that he might sell his piet. he said that word might several times. I never could figure out what the fucker was talking about. jim ------------------------------------------------------------------------------------- Other Matronics Email List Services ------------------------------------------------------------------------------------- Post A New Message pietenpol-list@matronics.com UN/SUBSCRIBE http://www.matronics.com/subscription List FAQ http://www.matronics.com/FAQ/Pietenpol-List.htm Web Forum Interface To Lists http://forums.matronics.com Matronics List Wiki http://wiki.matronics.com Full Archive Search Engine http://www.matronics.com/search 7-Day List Browse http://www.matronics.com/browse/pietenpol-list Browse Digests http://www.matronics.com/digest/pietenpol-list Browse Other Lists http://www.matronics.com/browse Live Online Chat! http://www.matronics.com/chat Archive Downloading http://www.matronics.com/archives Photo Share http://www.matronics.com/photoshare Other Email Lists http://www.matronics.com/emaillists Contributions http://www.matronics.com/contribution ------------------------------------------------------------------------------------- These Email List Services are sponsored solely by Matronics and through the generous Contributions of its members.