---------------------------------------------------------- Pietenpol-List Digest Archive --- Total Messages Posted Sat 05/24/14: 10 ---------------------------------------------------------- Today's Message Index: ---------------------- 1. 06:05 AM - Laminating Plywood (john francis) 2. 06:39 AM - Re: Laminating Plywood (tools) 3. 06:57 AM - Re: Laminating Plywood (john francis) 4. 07:54 AM - Re: Get'n ready for Brodhead (gsnewsome) 5. 08:13 AM - Pietenpolling at Lee Bottom (Douwe) 6. 10:57 AM - Re: Laminating Plywood (womenfly2) 7. 03:00 PM - Re: Laminating Plywood (tools) 8. 06:12 PM - A65 and Pietenpol Parts For Sale (gliderx5@comcast.net) 9. 07:41 PM - Fw: A65 and Pietenpol Parts For Sale (gliderx5@comcast.net) 10. 09:04 PM - Re: Pietenpolling at Lee Bottom (AircamperN11MS) ________________________________ Message 1 _____________________________________ Time: 06:05:41 AM PST US Subject: Pietenpol-List: Laminating Plywood From: "john francis" It appears I will be coming up a little short on 1/8 inch plywood but have plenty of 1/16 left. Is it acceptable to glue pieces together to get the desired thickness? John -------- John Francis Read this topic online here: http://forums.matronics.com/viewtopic.php?p=423724#423724 ________________________________ Message 2 _____________________________________ Time: 06:39:22 AM PST US Subject: Pietenpol-List: Re: Laminating Plywood From: "tools" Ya. How big are the pieces you are thinking about? Read this topic online here: http://forums.matronics.com/viewtopic.php?p=423729#423729 ________________________________ Message 3 _____________________________________ Time: 06:57:25 AM PST US Subject: Pietenpol-List: Re: Laminating Plywood From: "john francis" Tools, I have enough 1/8 to do all the gussets and my sides. The laminated pieces would mainly be used in the seat areas and the panels. John -------- John Francis Read this topic online here: http://forums.matronics.com/viewtopic.php?p=423732#423732 ________________________________ Message 4 _____________________________________ Time: 07:54:46 AM PST US Subject: Pietenpol-List: Re: Get'n ready for Brodhead From: "gsnewsome" I have the first on listed below. Comes in a small package and at 18 oz, fits well in the smallest of baggage compartments. The wife has the third one below a loves it. Plus, it has 4 legs. Pricey, but well designed. Alite Monarch Butterfly Chair $55.93 - $69.95 REI Flex Lite Chair $49.99 Alite Mantis Chair $119.95 - $124.95 Read this topic online here: http://forums.matronics.com/viewtopic.php?p=423736#423736 ________________________________ Message 5 _____________________________________ Time: 08:13:24 AM PST US Subject: Pietenpol-List: Pietenpolling at Lee Bottom From: Douwe Sent from my iPhone ________________________________ Message 6 _____________________________________ Time: 10:57:57 AM PST US Subject: Pietenpol-List: Re: Laminating Plywood From: "womenfly2" For nonstructural parts as you described, that would be fine. Just use as much weight as needed on the total part to get a good void free bond line. A laminating resin like West System would work fine. -------- Read this topic online here: http://forums.matronics.com/viewtopic.php?p=423746#423746 ________________________________ Message 7 _____________________________________ Time: 03:00:37 PM PST US Subject: Pietenpol-List: Re: Laminating Plywood From: "tools" Definitely will work. I even think it would be fine for some of the smaller gussets (the 3x4 inchers and such) as you can put enough force on them to get a really good glue joint. Really large areas are pretty tough. Lots of cauls and clamps. Read this topic online here: http://forums.matronics.com/viewtopic.php?p=423751#423751 ________________________________ Message 8 _____________________________________ Time: 06:12:19 PM PST US From: gliderx5@comcast.net Subject: Pietenpol-List: A65 and Pietenpol Parts For Sale ________________________________ Message 9 _____________________________________ Time: 07:41:09 PM PST US From: gliderx5@comcast.net Subject: Pietenpol-List: Fwd: A65 and Pietenpol Parts For Sale ________________________________ Message 10 ____________________________________ Time: 09:04:09 PM PST US Subject: Pietenpol-List: Re: Pietenpolling at Lee Bottom From: "AircamperN11MS" Douwe, Looks like you had fun. The plane sure blends in with all that grass. I've always wanted to fly into that place. Jealous in California, -------- Scott Liefeld Flying N11MS since March 1972 Steel Tube C-85-12 Wire Wheels Brodhead in 1996 Read this topic online here: http://forums.matronics.com/viewtopic.php?p=423757#423757 ------------------------------------------------------------------------------------- Other Matronics Email List Services ------------------------------------------------------------------------------------- Post A New Message pietenpol-list@matronics.com UN/SUBSCRIBE http://www.matronics.com/subscription List FAQ http://www.matronics.com/FAQ/Pietenpol-List.htm Web Forum Interface To Lists http://forums.matronics.com Matronics List Wiki http://wiki.matronics.com Full Archive Search Engine http://www.matronics.com/search 7-Day List Browse http://www.matronics.com/browse/pietenpol-list Browse Digests http://www.matronics.com/digest/pietenpol-list Browse Other Lists http://www.matronics.com/browse Live Online Chat! http://www.matronics.com/chat Archive Downloading http://www.matronics.com/archives Photo Share http://www.matronics.com/photoshare Other Email Lists http://www.matronics.com/emaillists Contributions http://www.matronics.com/contribution ------------------------------------------------------------------------------------- These Email List Services are sponsored solely by Matronics and through the generous Contributions of its members.