Pietenpol-List Digest Archive

Wed 09/10/14


Total Messages Posted: 31



Today's Message Index:
----------------------
 
     1. 12:39 AM - Re: Press Brake dimensions..... (jarheadpilot82)
     2. 03:47 AM - Re: Help With AC 8050-88 (Michael Perez)
     3. 05:39 AM - NX992WD "Finished" (Michael Perez)
     4. 05:54 AM - Re: NX992WD "Finished" (Cuy, Michael D. (GRC-LME0)[Vantage Partners, LLC])
     5. 06:05 AM - Re: NX992WD "Finished" (giacummo)
     6. 06:45 AM - Re: NX992WD "Finished" (curtdm(at)gmail.com)
     7. 06:57 AM - Re: NX992WD "Finished" (Jack Phillips)
     8. 07:05 AM - Re: Press Brake dimensions..... (aerocarjake)
     9. 07:11 AM - Re: NX992WD "Finished" (aerocarjake)
    10. 07:24 AM - Re: NX992WD "Finished" (Ryan Mueller)
    11. 07:40 AM - Re: NX992WD "Finished" (Jack Textor)
    12. 08:01 AM - Re: Re: Press Brake dimensions..... (Jack Textor)
    13. 08:17 AM - Re: Re: Press Brake dimensions..... (Michael Conkling)
    14. 08:19 AM - Re: NX992WD "Finished" (Michael Perez)
    15. 08:23 AM - Dawn Patrol---USAF Museum in Dayton, Ohio Sept. 27th &28th (Cuy, Michael D. (GRC-LME0)[Vantage Partners, LLC])
    16. 08:32 AM - Re: NX992WD "Finished" (jim hyde)
    17. 08:50 AM - Re: NX992WD "Finished" (Michael Perez)
    18. 09:57 AM - Re: NX992WD "Finished" (john francis)
    19. 10:04 AM - Re: NX992WD "Finished" (Scott Knowlton)
    20. 10:07 AM - Re: Press Brake dimensions..... (aerocarjake)
    21. 10:19 AM - Re: NX992WD "Finished" (gsnewsome)
    22. 10:56 AM - Re: NX992WD "Finished" (danhelsper@aol.com)
    23. 01:20 PM - Very nice 4" altimeter on Ebay (danhelsper@aol.com)
    24. 03:46 PM - Re: Very nice 4" altimeter on Ebay (jarheadpilot82)
    25. 03:53 PM - Re: NX992WD "Finished" (jarheadpilot82)
    26. 04:12 PM - Re: NX992WD "Finished" (curtdm(at)gmail.com)
    27. 04:50 PM - Re: NX992WD "Finished" (jarheadpilot82)
    28. 05:08 PM - Re: Re: NX992WD "Finished" (Michael Perez)
    29. 05:57 PM - Re: NX992WD "Finished" (nightmare)
    30. 08:07 PM - Progress in Pryor... (Jim Markle)
    31. 10:25 PM - Re: NX992WD "Finished" (biplan53)
 
 
 


Message 1


  • INDEX
  • Back to Main INDEX
  • NEXT
  • Skip to NEXT Message
  • LIST
  • Reply to LIST Regarding this Message
  • SENDER
  • Reply to SENDER Regarding this Message
    Time: 12:39:44 AM PST US
    Subject: Re: Press Brake dimensions.....
    From: "jarheadpilot82" <jarheadpilot82@hotmail.com>
    Jake, Did the C channel and flat stock come from the Lowe's/Home Depot Aviation Supply Store? -------- Semper Fi, Terry Hand Athens, GA Read this topic online here: http://forums.matronics.com/viewtopic.php?p=430272#430272


    Message 2


  • INDEX
  • Back to Main INDEX
  • PREVIOUS
  • Skip to PREVIOUS Message
  • NEXT
  • Skip to NEXT Message
  • LIST
  • Reply to LIST Regarding this Message
  • SENDER
  • Reply to SENDER Regarding this Message
    Time: 03:47:37 AM PST US
    From: Michael Perez <speedbrake@sbcglobal.net>
    Subject: Re: Help With AC 8050-88
    Thanks Steve...I've had my tail number reserved now for quite some time. If God is your co-pilot, switch seats Mike Perez Karetaker Aero Construction complete! (8/2014)


    Message 3


  • INDEX
  • Back to Main INDEX
  • PREVIOUS
  • Skip to PREVIOUS Message
  • NEXT
  • Skip to NEXT Message
  • LIST
  • Reply to LIST Regarding this Message
  • SENDER
  • Reply to SENDER Regarding this Message
    Time: 05:39:44 AM PST US
    From: Michael Perez <speedbrake@sbcglobal.net>
    Subject: NX992WD "Finished"
    It has been quite the journey. I started construction back in July of 2008, did an initial assembly in the garage, (skeletal) in 2011 and did the first engine start July, 2014. I am calling NX992WD finished as of August, 2014. I say "finished" because I still have small items to tend to: air brush work, bungee cords, oil tank repair, maybe a new C.S. lid, etc., etc. The A.C. is now disassembled and back in my shop. I will spend the winter months working on those various small items. I hope to find hangar space in the early spring, truck the A.C. out and do final assembly. Then move on to engine break in, ground tests, etc. Attached are some pictures of Foo Fighter 001, "Sweet Susie". If God is your co-pilot, switch seats Mike Perez KaretakerAero Construction complete! (8/2014)


    Message 4


  • INDEX
  • Back to Main INDEX
  • PREVIOUS
  • Skip to PREVIOUS Message
  • NEXT
  • Skip to NEXT Message
  • LIST
  • Reply to LIST Regarding this Message
  • SENDER
  • Reply to SENDER Regarding this Message
    Time: 05:54:27 AM PST US
    From: "Cuy, Michael D. (GRC-LME0)[Vantage Partners, LLC]" <michael.d.cuy@nasa.gov>
    Subject: NX992WD "Finished"
    Congratulations Mike!


    Message 5


  • INDEX
  • Back to Main INDEX
  • PREVIOUS
  • Skip to PREVIOUS Message
  • NEXT
  • Skip to NEXT Message
  • LIST
  • Reply to LIST Regarding this Message
  • SENDER
  • Reply to SENDER Regarding this Message
    Time: 06:05:51 AM PST US
    Subject: Re: NX992WD "Finished"
    From: "giacummo" <mario.giacummo@gmail.com>
    Excelent!!! Felicitaciones! -------- Mario Giacummo Photos here: http://goo.gl/wh7M4 Little Blog : http://vgmk1.blogspot.com Read this topic online here: http://forums.matronics.com/viewtopic.php?p=430286#430286


    Message 6


  • INDEX
  • Back to Main INDEX
  • PREVIOUS
  • Skip to PREVIOUS Message
  • NEXT
  • Skip to NEXT Message
  • LIST
  • Reply to LIST Regarding this Message
  • SENDER
  • Reply to SENDER Regarding this Message
    Time: 06:45:11 AM PST US
    Subject: Re: NX992WD "Finished"
    From: "curtdm(at)gmail.com" <curtdm@gmail.com>
    Looks Great Michael! -------- Curt Merdan Flower Mound, TX Read this topic online here: http://forums.matronics.com/viewtopic.php?p=430289#430289


    Message 7


  • INDEX
  • Back to Main INDEX
  • PREVIOUS
  • Skip to PREVIOUS Message
  • NEXT
  • Skip to NEXT Message
  • LIST
  • Reply to LIST Regarding this Message
  • SENDER
  • Reply to SENDER Regarding this Message
    Time: 06:57:28 AM PST US
    From: "Jack Phillips" <jack@bedfordlandings.com>
    Subject: NX992WD "Finished"
    Looks nice! Let us know how it flies. Jck Phillips NX899JP Smith Mountain Lake, Virginia _____ From: owner-pietenpol-list-server@matronics.com [mailto:owner-pietenpol-list-server@matronics.com] On Behalf Of Michael Perez Sent: Wednesday, September 10, 2014 8:39 AM Subject: Pietenpol-List: NX992WD "Finished" It has been quite the journey. I started construction back in July of 2008, did an initial assembly in the garage, (skeletal) in 2011 and did the first engine start July, 2014. I am calling NX992WD finished as of August, 2014. I say "finished" because I still have small items to tend to: air brush work, bungee cords, oil tank repair, maybe a new C.S. lid, etc., etc. The A.C. is now disassembled and back in my shop. I will spend the winter months working on those various small items. I hope to find hangar space in the early spring, truck the A.C. out and do final assembly. Then move on to engine break in, ground tests, etc. Attached are some pictures of Foo Fighter 001, "Sweet Susie". If God is your co-pilot, switch seats Mike Perez Karetaker Aero Construction complete! (8/2014)


    Message 8


  • INDEX
  • Back to Main INDEX
  • PREVIOUS
  • Skip to PREVIOUS Message
  • NEXT
  • Skip to NEXT Message
  • LIST
  • Reply to LIST Regarding this Message
  • SENDER
  • Reply to SENDER Regarding this Message
    Time: 07:05:48 AM PST US
    Subject: Re: Press Brake dimensions.....
    From: "aerocarjake" <flight.jake@gmail.com>
    Terry, Nope, I got mine from "Everett Steel" and they cut each piece to length. It felt like a kit when I got it home to drill/assemble...! (Not many things on a Pietenpol feel like a "kit"...!) -------- Jake Schultz - curator, Newport Way Air Museum (OK, it's just my home) Read this topic online here: http://forums.matronics.com/viewtopic.php?p=430294#430294


    Message 9


  • INDEX
  • Back to Main INDEX
  • PREVIOUS
  • Skip to PREVIOUS Message
  • NEXT
  • Skip to NEXT Message
  • LIST
  • Reply to LIST Regarding this Message
  • SENDER
  • Reply to SENDER Regarding this Message
    Time: 07:11:42 AM PST US
    Subject: Re: NX992WD "Finished"
    From: "aerocarjake" <flight.jake@gmail.com>
    Fantastic, inspiring....! -------- Jake Schultz - curator, Newport Way Air Museum (OK, it's just my home) Read this topic online here: http://forums.matronics.com/viewtopic.php?p=430296#430296


    Message 10


  • INDEX
  • Back to Main INDEX
  • PREVIOUS
  • Skip to PREVIOUS Message
  • NEXT
  • Skip to NEXT Message
  • LIST
  • Reply to LIST Regarding this Message
  • SENDER
  • Reply to SENDER Regarding this Message
    Time: 07:24:14 AM PST US
    From: Ryan Mueller <ryan@rmueller.org>
    Subject: Re: NX992WD "Finished"
    Congratulations Michael, very sharp indeed! -Ryan On Wed, Sep 10, 2014 at 7:39 AM, Michael Perez <speedbrake@sbcglobal.net> wrote: > > Attached are some pictures of Foo Fighter 001, "Sweet Susie". > > If God is your co-pilot, switch seats > Mike Perez > Karetaker Aero > Construction complete! (8/2014) >


    Message 11


  • INDEX
  • Back to Main INDEX
  • PREVIOUS
  • Skip to PREVIOUS Message
  • NEXT
  • Skip to NEXT Message
  • LIST
  • Reply to LIST Regarding this Message
  • SENDER
  • Reply to SENDER Regarding this Message
    Time: 07:40:09 AM PST US
    Subject: Re: NX992WD "Finished"
    From: Jack Textor <jack@textors.com>
    And pictures I got! beautiful Mike! Sent from my iPad > On Sep 10, 2014, at 7:39 AM, Michael Perez <speedbrake@sbcglobal.net> wrot e: > > It has been quite the journey. I started construction back in July of 2008 , did an initial assembly in the garage, (skeletal) in 2011 and did the firs t engine start July, 2014. I am calling NX992WD finished as of August, 2014. I say "finished" because I still have small items to tend to: air brush wor k, bungee cords, oil tank repair, maybe a new C.S. lid, etc., etc. > > The A.C. is now disassembled and back in my shop. I will spend the winter m onths working on those various small items. I hope to find hangar space in t he early spring, truck the A.C. out and do final assembly. Then move on to e ngine break in, ground tests, etc. > > Attached are some pictures of Foo Fighter 001, "Sweet Susie". > > If God is your co-pilot, switch seats > Mike Perez > Karetaker Aero > Construction complete! (8/2014) > <FooFighter001 Sweet Susie Side.jpg> > <FooFighter001 Sweet Susie Aft.jpg> > <FooFighter001 Sweet Susie Front.jpg> > <FooFighter001 Sweet Susie C.P.2.jpg>


    Message 12


  • INDEX
  • Back to Main INDEX
  • PREVIOUS
  • Skip to PREVIOUS Message
  • NEXT
  • Skip to NEXT Message
  • LIST
  • Reply to LIST Regarding this Message
  • SENDER
  • Reply to SENDER Regarding this Message
    Time: 08:01:02 AM PST US
    Subject: Re: Press Brake dimensions.....
    From: Jack Textor <jack@textors.com>
    Very nice. Here is another good option... http://www.weldingtipsandtricks.com/hydraulic-shop-press-brake.html Sent from my iPad > On Sep 9, 2014, at 9:18 PM, "curtdm(at)gmail.com" <curtdm@gmail.com> wrote : > com> > > Ta Da! > > -------- > Curt Merdan > Flower Mound, TX > > > > > Read this topic online here: > > http://forums.matronics.com/viewtopic.php?p=430268#430268 > > > > > Attachments: > > http://forums.matronics.com//files/image_905.jpg > > > > ========================== ========= ========================== ========= ========================== ========= ========================== ========= > > >


    Message 13


  • INDEX
  • Back to Main INDEX
  • PREVIOUS
  • Skip to PREVIOUS Message
  • NEXT
  • Skip to NEXT Message
  • LIST
  • Reply to LIST Regarding this Message
  • SENDER
  • Reply to SENDER Regarding this Message
    Time: 08:17:10 AM PST US
    Subject: Re: Press Brake dimensions.....
    From: Michael Conkling <jmconkling@gmail.com>
    Hello Folks, Let's not forget Williams Lowbuck tools for their Bracket Brake -- it will handle 1/8" x 6" steel... Mike C. Pretty Prairie, KS On Wed, Sep 10, 2014 at 9:32 AM, Jack Textor <jack@textors.com> wrote: > Very nice. Here is another good option... > > http://www.weldingtipsandtricks.com/hydraulic-shop-press-brake.html > > Sent from my iPad > > On Sep 9, 2014, at 9:18 PM, "curtdm(at)gmail.com" <curtdm@gmail.com> > wrote: > > curtdm@gmail.com> > > Ta Da! > > -------- > Curt Merdan > Flower Mound, TX > > > Read this topic online here: > > http://forums.matronics.com/viewtopic.php?p=430268#430268 > > > Attachments: > > http://forums.matronics.com//files/image_905.jpg > ====================================================; - The > Pietenpol-List Email Forum - > = Archive Search & Download, 7-Day Browse, Chat, FAQ, > npol-List">http://www.matronics.com/Navigator?Pietenpol-List > <========================== &nb --> http://forums.ma==================================================== &n > http://www.matronics.com/============================================= > > > <http://www.matronics.com/contribution> > > * > > > * > >


    Message 14


  • INDEX
  • Back to Main INDEX
  • PREVIOUS
  • Skip to PREVIOUS Message
  • NEXT
  • Skip to NEXT Message
  • LIST
  • Reply to LIST Regarding this Message
  • SENDER
  • Reply to SENDER Regarding this Message
    Time: 08:19:46 AM PST US
    From: Michael Perez <speedbrake@sbcglobal.net>
    Subject: Re: NX992WD "Finished"
    "...and pictures I got!" Ask and ye shall receive! If God is your co-pilot, switch seats Mike Perez Karetaker Aero Construction complete! (8/2014


    Message 15


  • INDEX
  • Back to Main INDEX
  • PREVIOUS
  • Skip to PREVIOUS Message
  • NEXT
  • Skip to NEXT Message
  • LIST
  • Reply to LIST Regarding this Message
  • SENDER
  • Reply to SENDER Regarding this Message
    Time: 08:23:03 AM PST US
    From: "Cuy, Michael D. (GRC-LME0)[Vantage Partners, LLC]" <michael.d.cuy@nasa.gov>
    Subject: Dawn Patrol---USAF Museum in Dayton, Ohio Sept. 27th
    &28th Always a fun event. Most are VW powered/ aluminum-framed replicas but sti ll cool. http://www.nationalmuseum.af.mil/news/story.asp?id=123422927


    Message 16


  • INDEX
  • Back to Main INDEX
  • PREVIOUS
  • Skip to PREVIOUS Message
  • NEXT
  • Skip to NEXT Message
  • LIST
  • Reply to LIST Regarding this Message
  • SENDER
  • Reply to SENDER Regarding this Message
    Time: 08:32:59 AM PST US
    From: jim hyde <jnl96@yahoo.com>
    Subject: Re: NX992WD "Finished"
    cvery nice,, can u send pics of the engne installation On Wednesday, September 10, 2014 10:25 AM, Michael Perez <speedbrake@sbcglobal.net> wrote: "...and pictures I got!" Ask and ye shall receive! If God is your co-pilot, switch seats Mike Perez Karetaker Aero Construction complete! (8/2014


    Message 17


  • INDEX
  • Back to Main INDEX
  • PREVIOUS
  • Skip to PREVIOUS Message
  • NEXT
  • Skip to NEXT Message
  • LIST
  • Reply to LIST Regarding this Message
  • SENDER
  • Reply to SENDER Regarding this Message
    Time: 08:50:54 AM PST US
    From: Michael Perez <speedbrake@sbcglobal.net>
    Subject: Re: NX992WD "Finished"
    Engine pictures attached. If God is your co-pilot, switch seats Mike Perez Karetaker Aero Construction complete! (8/2014)


    Message 18


  • INDEX
  • Back to Main INDEX
  • PREVIOUS
  • Skip to PREVIOUS Message
  • NEXT
  • Skip to NEXT Message
  • LIST
  • Reply to LIST Regarding this Message
  • SENDER
  • Reply to SENDER Regarding this Message
    Time: 09:57:03 AM PST US
    Subject: Re: NX992WD "Finished"
    From: "john francis" <Mrkringles@msn.com>
    Congratulations Mike! Shes a beauty!! -------- John Francis Read this topic online here: http://forums.matronics.com/viewtopic.php?p=430307#430307


    Message 19


  • INDEX
  • Back to Main INDEX
  • PREVIOUS
  • Skip to PREVIOUS Message
  • NEXT
  • Skip to NEXT Message
  • LIST
  • Reply to LIST Regarding this Message
  • SENDER
  • Reply to SENDER Regarding this Message
    Time: 10:04:53 AM PST US
    Subject: Re: NX992WD "Finished"
    From: Scott Knowlton <flyingscott_k@hotmail.com>
    Can you share the paint process you used on your engine? And how you plated the pushrod tubes? Mine appear permanently attached to the head so I don't see how one could have them plated.... Scott Knowlton. Sent from my iPhone > On Sep 10, 2014, at 8:57 AM, "Michael Perez" <speedbrake@sbcglobal.net> wrote: > > Engine pictures attached. > > > If God is your co-pilot, switch seats > Mike Perez > Karetaker Aero > Construction complete! (8/2014) > <Engine In Work 1.jpg> > <Engine In Work 2.jpg> > <Engine Front.jpg> > <Magnetos.jpg>


    Message 20


  • INDEX
  • Back to Main INDEX
  • PREVIOUS
  • Skip to PREVIOUS Message
  • NEXT
  • Skip to NEXT Message
  • LIST
  • Reply to LIST Regarding this Message
  • SENDER
  • Reply to SENDER Regarding this Message
    Time: 10:07:02 AM PST US
    Subject: Re: Press Brake dimensions.....
    From: "aerocarjake" <flight.jake@gmail.com>
    There is also this nice tool, but it has no capability to use a goose-neck punch - which is particularly useful for some "deep" Pietenpol parts. http://www.trick-tools.com/Bend_Press_Benchtop_Manual_Press_Brake_20_ton_BP1020_1618 -------- Jake Schultz - curator, Newport Way Air Museum (OK, it's just my home) Read this topic online here: http://forums.matronics.com/viewtopic.php?p=430308#430308


    Message 21


  • INDEX
  • Back to Main INDEX
  • PREVIOUS
  • Skip to PREVIOUS Message
  • NEXT
  • Skip to NEXT Message
  • LIST
  • Reply to LIST Regarding this Message
  • SENDER
  • Reply to SENDER Regarding this Message
    Time: 10:19:11 AM PST US
    Subject: Re: NX992WD "Finished"
    From: "gsnewsome" <newfaithkat@windstream.net>
    That's a beautiful Piet! Congratulations... Read this topic online here: http://forums.matronics.com/viewtopic.php?p=430309#430309


    Message 22


  • INDEX
  • Back to Main INDEX
  • PREVIOUS
  • Skip to PREVIOUS Message
  • NEXT
  • Skip to NEXT Message
  • LIST
  • Reply to LIST Regarding this Message
  • SENDER
  • Reply to SENDER Regarding this Message
    Time: 10:56:47 AM PST US
    Subject: Re: NX992WD "Finished"
    From: danhelsper@aol.com
    =0A=0ACongrats Mike! Sharp!=0A=0A=0ADan Helsper=0APuryear, TN=0A


    Message 23


  • INDEX
  • Back to Main INDEX
  • PREVIOUS
  • Skip to PREVIOUS Message
  • NEXT
  • Skip to NEXT Message
  • LIST
  • Reply to LIST Regarding this Message
  • SENDER
  • Reply to SENDER Regarding this Message
    Time: 01:20:09 PM PST US
    Subject: Very nice 4" altimeter on Ebay
    From: danhelsper@aol.com
    =0AHere is a perfect-shape 4" altimeter for someone. Pricey, b ut you probably would be hard-pressed to find a better one.=0A =0A=0Ahttp://i.ebayimg.com/00/s/MTIwMFgxNjAw/z/564AAOSwEK9T9u-d/$_14.JPG=0A=0A=0A =0A=0AItem # 201154839079=0A=0A=0ADan Helsper=0ALoensloe Airfield=0APury ear, TN=0A


    Message 24


  • INDEX
  • Back to Main INDEX
  • PREVIOUS
  • Skip to PREVIOUS Message
  • NEXT
  • Skip to NEXT Message
  • LIST
  • Reply to LIST Regarding this Message
  • SENDER
  • Reply to SENDER Regarding this Message
    Time: 03:46:41 PM PST US
    Subject: Re: Very nice 4" altimeter on Ebay
    From: "jarheadpilot82" <jarheadpilot82@hotmail.com>
    Dan, Very nice looking indeed. That would look awesome in someone's Pietenpol. FWIW, I have a picture of the altimeter I found on eBay. It is being rebuilt and the face restored. If anybody finds an altimeter that needs rebuilding let me know and I will forward th einfo for the repair station doing mine. I was quoted a price of $250.00 to get mine restored. -------- Semper Fi, Terry Hand Athens, GA Read this topic online here: http://forums.matronics.com/viewtopic.php?p=430324#430324 Attachments: http://forums.matronics.com//files/image_162.jpg http://forums.matronics.com//files/image_911.jpg


    Message 25


  • INDEX
  • Back to Main INDEX
  • PREVIOUS
  • Skip to PREVIOUS Message
  • NEXT
  • Skip to NEXT Message
  • LIST
  • Reply to LIST Regarding this Message
  • SENDER
  • Reply to SENDER Regarding this Message
    Time: 03:53:05 PM PST US
    Subject: Re: NX992WD "Finished"
    From: "jarheadpilot82" <jarheadpilot82@hotmail.com>
    Mike, Just curious about the "Kilo Tango" tail code. I looked up the tail code but could not find it on the Navy websites I went to. I always like to know the background when builders choose certain features such as tail codes. Enlighten me, please. Thanks! -------- Semper Fi, Terry Hand Athens, GA Read this topic online here: http://forums.matronics.com/viewtopic.php?p=430327#430327


    Message 26


  • INDEX
  • Back to Main INDEX
  • PREVIOUS
  • Skip to PREVIOUS Message
  • NEXT
  • Skip to NEXT Message
  • LIST
  • Reply to LIST Regarding this Message
  • SENDER
  • Reply to SENDER Regarding this Message
    Time: 04:12:28 PM PST US
    Subject: Re: NX992WD "Finished"
    From: "curtdm(at)gmail.com" <curtdm@gmail.com>
    KareTaker? -------- Curt Merdan Flower Mound, TX Read this topic online here: http://forums.matronics.com/viewtopic.php?p=430328#430328


    Message 27


  • INDEX
  • Back to Main INDEX
  • PREVIOUS
  • Skip to PREVIOUS Message
  • NEXT
  • Skip to NEXT Message
  • LIST
  • Reply to LIST Regarding this Message
  • SENDER
  • Reply to SENDER Regarding this Message
    Time: 04:50:21 PM PST US
    Subject: Re: NX992WD "Finished"
    From: "jarheadpilot82" <jarheadpilot82@hotmail.com>
    Makes sense. -------- Semper Fi, Terry Hand Athens, GA Read this topic online here: http://forums.matronics.com/viewtopic.php?p=430330#430330


    Message 28


  • INDEX
  • Back to Main INDEX
  • PREVIOUS
  • Skip to PREVIOUS Message
  • NEXT
  • Skip to NEXT Message
  • LIST
  • Reply to LIST Regarding this Message
  • SENDER
  • Reply to SENDER Regarding this Message
    Time: 05:08:37 PM PST US
    From: Michael Perez <speedbrake@sbcglobal.net>
    Subject: Re: NX992WD "Finished"
    Thank you all very much for the kind words and the personal emails. I know you guys understand what it takes to get here from six years ago and I appreciate the words of encouragement. I hope I can return the favor to future builders as I make my way to a proven aircraft platform. Terry, (others) My paint scheme is from the F-14 Tomcats on board the U.S.S. Nimitz, VF-84 Jolly Rodgers. I painted K.T. In place of A.J. As noted, K.T. is short for Karetaker, my call sign while doing air combat on line. Most all the planes I do combat with have this custom "painted" paint scheme on them...modified to fit the individual aircraft. It would be cool someday if I am approached by someone at a fly in whom recognizes my plane solely from doing A.C.M on line. If God is your co-pilot, switch seats Mike Perez Karetaker Aero Construction complete! (8/2014)


    Message 29


  • INDEX
  • Back to Main INDEX
  • PREVIOUS
  • Skip to PREVIOUS Message
  • NEXT
  • Skip to NEXT Message
  • LIST
  • Reply to LIST Regarding this Message
  • SENDER
  • Reply to SENDER Regarding this Message
    Time: 05:57:32 PM PST US
    Subject: Re: NX992WD "Finished"
    From: "nightmare" <pauldonahuepilot@yahoo.com>
    AWESOME Michael!!! Congrats. That's one sharp machine. love the trim wheel mechanism. Dying to know the weight though. Is it the worlds lightest? -------- Paul Donahue Started 8-3-12 do not archive Read this topic online here: http://forums.matronics.com/viewtopic.php?p=430333#430333


    Message 30


  • INDEX
  • Back to Main INDEX
  • PREVIOUS
  • Skip to PREVIOUS Message
  • NEXT
  • Skip to NEXT Message
  • LIST
  • Reply to LIST Regarding this Message
  • SENDER
  • Reply to SENDER Regarding this Message
    Time: 08:07:39 PM PST US
    From: Jim Markle <jim_markle@mindspring.com>
    Subject: Progress in Pryor...
    Two pictures to share: what the center section looked like on Sunday and wh at it looks like now....FINISHED! Not as exciting as Michael Perez' great n ews (and Congrats Michael!!!) but progress! Jim in Pryor. <pre><b><font size=2 color="#000000" face="courier new,courier"> </b></font></pre></body></html>


    Message 31


  • INDEX
  • Back to Main INDEX
  • PREVIOUS
  • Skip to PREVIOUS Message
  • NEXT
  • Skip to NEXT Message
  • LIST
  • Reply to LIST Regarding this Message
  • SENDER
  • Reply to SENDER Regarding this Message
    Time: 10:25:28 PM PST US
    Subject: Re: NX992WD "Finished"
    From: "biplan53" <biplan53@hotmail.com>
    Really clean work. I like your cooling baffles. You have a nice looking airplane. -------- Building steel fuselage aircamper. Read this topic online here: http://forums.matronics.com/viewtopic.php?p=430343#430343




    Other Matronics Email List Services

  • Post A New Message
  •   pietenpol-list@matronics.com
  • UN/SUBSCRIBE
  •   http://www.matronics.com/subscription
  • List FAQ
  •   http://www.matronics.com/FAQ/Pietenpol-List.htm
  • Web Forum Interface To Lists
  •   http://forums.matronics.com
  • Matronics List Wiki
  •   http://wiki.matronics.com
  • 7-Day List Browse
  •   http://www.matronics.com/browse/pietenpol-list
  • Browse Pietenpol-List Digests
  •   http://www.matronics.com/digest/pietenpol-list
  • Browse Other Lists
  •   http://www.matronics.com/browse
  • Live Online Chat!
  •   http://www.matronics.com/chat
  • Archive Downloading
  •   http://www.matronics.com/archives
  • Photo Share
  •   http://www.matronics.com/photoshare
  • Other Email Lists
  •   http://www.matronics.com/emaillists
  • Contributions
  •   http://www.matronics.com/contribution

    These Email List Services are sponsored solely by Matronics and through the generous Contributions of its members.

    -- Please support this service by making your Contribution today! --