---------------------------------------------------------- Pietenpol-List Digest Archive --- Total Messages Posted Sat 10/25/14: 10 ---------------------------------------------------------- Today's Message Index: ---------------------- 1. 04:57 AM - The fuse is ready! (Jim Markle) 2. 05:15 AM - Re: The fuse is ready! (Jack) 3. 06:04 AM - Re: The fuse is ready! (Gary Boothe) 4. 06:27 AM - Re: The fuse is ready! (Ken Bickers) 5. 08:34 AM - Re: The fuse is ready! (nightmare) 6. 09:40 AM - Re: The fuse is ready! (danhelsper@aol.com) 7. 11:25 AM - Radio_Headset_Incercom Issue (gliderx5@comcast.net) 8. 06:12 PM - Re: The fuse is ready! (taildrags) 9. 06:58 PM - Re: Radio_Headset_Incercom Issue (George Abernathy) 10. 07:14 PM - Re: The fuse is ready! (Riegerb) ________________________________ Message 1 _____________________________________ Time: 04:57:14 AM PST US From: Jim Markle Subject: Pietenpol-List: The fuse is ready! Finished covering and painting the fuse this last week. It's a great feelin g to tighten up the landing gear turnbuckles and know all I have left is add ing the safety wire. Sent from my smartphone.



________________________________ Message 2 _____________________________________ Time: 05:15:20 AM PST US Subject: Re: Pietenpol-List: The fuse is ready! From: Jack Fantastic Jim! Sent from my iPad Jack Textor > On Oct 25, 2014, at 6:56 AM, Jim Markle wrote: > > Finished covering and painting the fuse this last week. It's a great feeling to tighten up the landing gear turnbuckles and know all I have left is adding the safety wire. > > > > Sent from my smartphone. >

> 
> 
> 
________________________________ Message 3 _____________________________________ Time: 06:04:59 AM PST US From: "Gary Boothe" Subject: RE: Pietenpol-List: The fuse is ready! I like the wraps on the gear! Gary Boothe NX308MB -----Original Message----- From: owner-pietenpol-list-server@matronics.com [mailto:owner-pietenpol-list-server@matronics.com] On Behalf Of Jim Markle Sent: Saturday, October 25, 2014 4:57 AM Subject: Pietenpol-List: The fuse is ready! Finished covering and painting the fuse this last week. It's a great feeling to tighten up the landing gear turnbuckles and know all I have left is adding the safety wire. ________________________________ Message 4 _____________________________________ Time: 06:27:49 AM PST US Subject: Re: Pietenpol-List: The fuse is ready! From: Ken Bickers Looks great, Jim. Gonna be purty!! Ken On Sat, Oct 25, 2014 at 5:56 AM, Jim Markle wrote: > Finished covering and painting the fuse this last week. It's a great > feeling to tighten up the landing gear turnbuckles and know all I have left > is adding the safety wire. > > > Sent from my smartphone. >

>
>
> http://www.matronics.com/Navigator?Pietenpol-List
>
> http://forums.matronics.com
>
> http://www.matronics.com/contribution
>
>
> 
> ________________________________ Message 5 _____________________________________ Time: 08:34:21 AM PST US Subject: Pietenpol-List: Re: The fuse is ready! From: "nightmare" awesome Jim! love the black on black spoke rim combo. -------- Paul Donahue Started 8-3-12 do not archive Read this topic online here: http://forums.matronics.com/viewtopic.php?p=432253#432253 ________________________________ Message 6 _____________________________________ Time: 09:40:35 AM PST US Subject: Re: Pietenpol-List: The fuse is ready! From: danhelsper@aol.com Beautiful Jim! Congrats!!=0A=0A=0ADan Helsper=0ALoensloe Airfield=0APury ear, TN=0A=0A=0A=0A-----Original Message-----=0AFrom: Jim Markle =0ATo: pietenpol-list =0A Sent: Sat, Oct 25, 2014 6:57 am=0ASubject: Pietenpol-List: The fuse is ready!=0A=0A=0AFinished covering and painting the fuse t his last week. It's a great feeling to =0Atighten up the landing gear turnbuckles and know all I have left is adding the =0Asafety wire. =0A=0A =0A=0ASent from my smartphone.=0A=0A =3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D =3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D 3D"http://www.matronics.com/Navigator?Pietenpol-List">http://www.matronics.com/N 3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D= 3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D= 3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D= =3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D =3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D =3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D -Matt Dralle 3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D= 3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D= 3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D= 3D=3D=3D=3D=3D=3D=3D=3D=3D=0A=0A=0A =0A =0A=0A ________________________________ Message 7 _____________________________________ Time: 11:25:57 AM PST US From: gliderx5@comcast.net Subject: Pietenpol-List: Radio_Headset_Incercom Issue I'm having an issue in my Tripacer, not the Piet, but it's a generic problem so perhaps some here knows the answer. I have a Narco MK12D radio with a Sigtronics 400 TSO intercom and I use a cheap Flightcom headset along with a BayerDynamic 400 ANR headset. I've traced all the wiring from the jacks to the intercom and from the intercom to the radio. The Mic jacks are installed with the fiber step washers. Here's the problem. If I plug the BayerDynamics into the co-pilot jacks and the Flightcoms into the pilot jacks everything works fine. Both occupants can hear each other. But if I switch them the Flightcoms mic will not work in the co-pilot jack. Any thoughts! Thanks Malcolm ________________________________ Message 8 _____________________________________ Time: 06:12:40 PM PST US Subject: Pietenpol-List: Re: The fuse is ready! From: "taildrags" Jim, it will just be awesome when your airplane finally takes to the air with you at the controls. Just amazing. Keep moving forward! -------- Oscar Zuniga Medford, OR Air Camper NX41CC "Scout" A75 power Read this topic online here: http://forums.matronics.com/viewtopic.php?p=432273#432273 ________________________________ Message 9 _____________________________________ Time: 06:58:51 PM PST US From: George Abernathy Subject: Re: Pietenpol-List: Radio_Headset_Incercom Issue check to see if the headsets have ground connections on the earphone plugs. does the transmit function work for both headsets? Memory sludge serves up something about tan and brown=C2-wires causing this.=C2- From: "gliderx5@comcast.net" To: Pietenpol Sent: Saturday, October 25, 2014 11:25 AM Subject: Pietenpol-List: Radio_Headset_Incercom Issue I'm having an issue in my Tripacer, not the Piet, but it's a generic proble m so perhaps some here knows the answer. I have a Narco MK12D radio with a Sigtronics 400 TSO intercom and I use a cheap Flightcom headset along with a BayerDynamic 400 ANR headset. I've traced all the wiring from the jacks t o the intercom and from the intercom to the radio. The Mic jacks are instal led with the fiber step washers. Here's the problem. If I plug the BayerDyn amics into the co-pilot jacks and the Flightcoms into the pilot jacks every thing works fine. Both occupants can hear each other. But if I switch them the Flightcoms mic will not work in the co-pilot jack.=C2- Any thoughts! Thanks Malcolm ________________________________ Message 10 ____________________________________ Time: 07:14:56 PM PST US Subject: Pietenpol-List: Re: The fuse is ready! From: "Riegerb" Beauty! -------- riegerpietenpol.tumblr.com Read this topic online here: http://forums.matronics.com/viewtopic.php?p=432277#432277 ------------------------------------------------------------------------------------- Other Matronics Email List Services ------------------------------------------------------------------------------------- Post A New Message pietenpol-list@matronics.com UN/SUBSCRIBE http://www.matronics.com/subscription List FAQ http://www.matronics.com/FAQ/Pietenpol-List.htm Web Forum Interface To Lists http://forums.matronics.com Matronics List Wiki http://wiki.matronics.com Full Archive Search Engine http://www.matronics.com/search 7-Day List Browse http://www.matronics.com/browse/pietenpol-list Browse Digests http://www.matronics.com/digest/pietenpol-list Browse Other Lists http://www.matronics.com/browse Live Online Chat! http://www.matronics.com/chat Archive Downloading http://www.matronics.com/archives Photo Share http://www.matronics.com/photoshare Other Email Lists http://www.matronics.com/emaillists Contributions http://www.matronics.com/contribution ------------------------------------------------------------------------------------- These Email List Services are sponsored solely by Matronics and through the generous Contributions of its members.