Today's Message Index:
----------------------
1. 02:19 AM - Re: Something Different (Peter Johnson)
2. 11:05 AM - Model A motor mount (Stuart Brown)
Message 1
INDEX | Back to Main INDEX |
NEXT | Skip to NEXT Message |
LIST | Reply to LIST Regarding this Message |
SENDER | Reply to SENDER Regarding this Message |
|
Subject: | Re: Something Different |
Thanks Gerry,
The original was on Channel 4s (UK) web site. I couldn't view because of
licensing problems. I thought youtube would have been OK.
Thanks
Peter
On 13/11/2014 6:51 pm, "Gerry Holland" <gloriabots@yahoo.com> wrote:
>
>Thanks Peter for Video link.
>You will have to use the following link to view this video due to
>licensing nonsense..
>http://vimeo.com/109761230
>Regards
>Gerry
>
>
Message 2
INDEX | Back to Main INDEX |
PREVIOUS | Skip to PREVIOUS Message |
NEXT | Skip to NEXT Message |
LIST | Reply to LIST Regarding this Message |
SENDER | Reply to SENDER Regarding this Message |
|
Subject: | Model A motor mount |
I'm working with a friend mounting a Model A motor in his Piet. The plans call
for drilling 4 of the pan bolts and installing a 5/16" bolt thru the wood engine
bearer, thru the cast flange, and securing with a spring and jamb nut on the
flange side. His motor does not have enough clearance between the center of
the bolt and the motor casting on the left side to allow for the nut and spring.
Has anyone has this problem and what was your solution? The clearance hole
for the bolt has all ready been drilled.
Thanks,
Stu
Sent from my iPad
Other Matronics Email List Services
These Email List Services are sponsored solely by Matronics and through the generous Contributions of its members.
-- Please support this service by making your Contribution today! --
|