Pietenpol-List Digest Archive

Fri 12/26/14


Total Messages Posted: 3



Today's Message Index:
----------------------
 
     1. 05:34 PM - Re: Latex Paint Rolling Video (taildrags)
     2. 06:56 PM - Re: Re: Latex Paint Rolling Video (gliderx5@comcast.net)
     3. 08:02 PM - Re: Re: Latex Paint Rolling Video (Ray Krause)
 
 
 


Message 1


  • INDEX
  • Back to Main INDEX
  • NEXT
  • Skip to NEXT Message
  • LIST
  • Reply to LIST Regarding this Message
  • SENDER
  • Reply to SENDER Regarding this Message
    Time: 05:34:35 PM PST US
    Subject: Re: Latex Paint Rolling Video
    From: "taildrags" <taildrags@hotmail.com>
    Malcolm; That is really interesting, and you make it look very easy to get a nice smooth finish and a great shine! I'm sure it ends up requiring a lot of hours of work to do all of those steps for an entire airplane, but then again if you paint as you build (tail, fuselage, wings), it spreads the work out somewhat. Also, many Piet builders go for less of a shine and polish since the early Air Campers were built for simple and low-cost building and flying. A little bit of orange peel and a little less shine would be perfectly acceptable if you were flying your Piet off a grass pasture down on the farm and there were no judges looking at the paint job. -------- Oscar Zuniga Medford, OR Air Camper NX41CC &quot;Scout&quot; A75 power Read this topic online here: http://forums.matronics.com/viewtopic.php?p=436295#436295


    Message 2


  • INDEX
  • Back to Main INDEX
  • PREVIOUS
  • Skip to PREVIOUS Message
  • NEXT
  • Skip to NEXT Message
  • LIST
  • Reply to LIST Regarding this Message
  • SENDER
  • Reply to SENDER Regarding this Message
    Time: 06:56:56 PM PST US
    From: gliderx5@comcast.net
    Subject: Re: Latex Paint Rolling Video
    Oscar You are quite correct on all counts. The process is not especially hard, but applying to an entire airplane does require a bit of time and elbow grease. Of course, it pales in comparison to how long it takes to build an entire airplane. I didn't say it on the last video but I have on some of the others, that the painted finish before sanding and polishing looks just fine as it is for some applications, vintage aircraft like Piets included. As you know, un-polished latex has been used on several Piets in the past and they look great. The hi-gloss, wet look would be truly out of place on such aircraft. That's great news for those looking for a flat or semi-gloss look. In fact, brush strokes in the paint might even be appropriate to give it more of an antique look. Either way, latex is simple and low cost, whether polished or not. I think I may have been a crow in a past life, I'm irresistibly attracted to shinny things! Malcolm Morrison www.wienerdogaero.com ----- Original Message ----- From: "taildrags" <taildrags@hotmail.com> Sent: Friday, December 26, 2014 8:33:57 PM Subject: Pietenpol-List: Re: Latex Paint Rolling Video Malcolm; That is really interesting, and you make it look very easy to get a nice smooth finish and a great shine! I'm sure it ends up requiring a lot of hours of work to do all of those steps for an entire airplane, but then again if you paint as you build (tail, fuselage, wings), it spreads the work out somewhat. Also, many Piet builders go for less of a shine and polish since the early Air Campers were built for simple and low-cost building and flying. A little bit of orange peel and a little less shine would be perfectly acceptable if you were flying your Piet off a grass pasture down on the farm and there were no judges looking at the paint job. -------- Oscar Zuniga Medford, OR Air Camper NX41CC &quot;Scout&quot; A75 power Read this topic online here: http://forums.matronics.com/viewtopic.php?p=436295#436295


    Message 3


  • INDEX
  • Back to Main INDEX
  • PREVIOUS
  • Skip to PREVIOUS Message
  • NEXT
  • Skip to NEXT Message
  • LIST
  • Reply to LIST Regarding this Message
  • SENDER
  • Reply to SENDER Regarding this Message
    Time: 08:02:26 PM PST US
    From: Ray Krause <raykrause@frontiernet.net>
    Subject: Re: Latex Paint Rolling Video
    Oscar, Gary Booth used the Stewart System on his PIET but went right to a latex pri mer, then latex finishing coats, all with roller (I think). It is absolutely beautiful! It looks very Period like, not at all glossy. There are pictures on Westcoast Pietenpol. I'm going to follow his lead and go Stewart's cover ing then right to latex, no EkoFill. I also plan on using some clear coats o f latex so it really looks semi transparent like the old planes. Thanks, Ray Krause SkyScout Sent from my iPad > On Dec 26, 2014, at 6:56 PM, gliderx5@comcast.net wrote: > > Oscar > > You are quite correct on all counts. The process is not especially hard, b ut applying to an entire airplane does require a bit of time and elbow greas e. Of course, it pales in comparison to how long it takes to build an entire airplane. I didn't say it on the last video but I have on some of the other s, that the painted finish before sanding and polishing looks just fine as i t is for some applications, vintage aircraft like Piets included. As you kno w, un-polished latex has been used on several Piets in the past and they loo k great. The hi-gloss, wet look would be truly out of place on such aircraft . That's great news for those looking for a flat or semi-gloss look. In fact , brush strokes in the paint might even be appropriate to give it more of an antique look. Either way, latex is simple and low cost, whether polished or not. > > I think I may have been a crow in a past life, I'm irresistibly attracted t o shinny things! > > Malcolm Morrison > www.wienerdogaero.com > > From: "taildrags" <taildrags@hotmail.com> > To: pietenpol-list@matronics.com > Sent: Friday, December 26, 2014 8:33:57 PM > Subject: Pietenpol-List: Re: Latex Paint Rolling Video > > > Malcolm; > > That is really interesting, and you make it look very easy to get a nice s mooth finish and a great shine! I'm sure it ends up requiring a lot of hour s of work to do all of those steps for an entire airplane, but then again if you paint as you build (tail, fuselage, wings), it spreads the work out som ewhat. Also, many Piet builders go for less of a shine and polish since the early Air Campers were built for simple and low-cost building and flying. A little bit of orange peel and a little less shine would be perfectly accept able if you were flying your Piet off a grass pasture down on the farm and t here were no judges looking at the paint job. > > -------- > Oscar Zuniga > Medford, OR > Air Camper NX41CC &quot;Scout&quot; > A75 power > > > > > Read this topic online here: > > http://forums.matronics.com/viewtopic.php?p=436295#436295 > ; &nb - MATRONICS WEB FORUMS -<=== == > > > > > > 3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3 D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D =3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D 3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3 D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D =3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D 3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3 D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D =3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D 3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3 D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D =3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D >




    Other Matronics Email List Services

  • Post A New Message
  •   pietenpol-list@matronics.com
  • UN/SUBSCRIBE
  •   http://www.matronics.com/subscription
  • List FAQ
  •   http://www.matronics.com/FAQ/Pietenpol-List.htm
  • Web Forum Interface To Lists
  •   http://forums.matronics.com
  • Matronics List Wiki
  •   http://wiki.matronics.com
  • 7-Day List Browse
  •   http://www.matronics.com/browse/pietenpol-list
  • Browse Pietenpol-List Digests
  •   http://www.matronics.com/digest/pietenpol-list
  • Browse Other Lists
  •   http://www.matronics.com/browse
  • Live Online Chat!
  •   http://www.matronics.com/chat
  • Archive Downloading
  •   http://www.matronics.com/archives
  • Photo Share
  •   http://www.matronics.com/photoshare
  • Other Email Lists
  •   http://www.matronics.com/emaillists
  • Contributions
  •   http://www.matronics.com/contribution

    These Email List Services are sponsored solely by Matronics and through the generous Contributions of its members.

    -- Please support this service by making your Contribution today! --