---------------------------------------------------------- Pietenpol-List Digest Archive --- Total Messages Posted Sun 01/25/15: 15 ---------------------------------------------------------- Today's Message Index: ---------------------- 1. 04:24 AM - Re: For your viewing pleasure... (Jack Philips) 2. 06:18 AM - Re: For your viewing pleasure... (Gary Boothe) 3. 06:21 AM - Re: Work list for this weekend (G Bradley Williams) 4. 07:11 AM - Re: Work list for this weekend (tools) 5. 08:03 AM - Re: For your viewing pleasure... (Tony Crawford) 6. 04:04 PM - Re: For your viewing pleasure... (danhelsper@aol.com) 7. 05:03 PM - Re: Data Plate and airworthiness certificate (AircamperN11MS) 8. 05:45 PM - what dates for Brodhead 2015? (Pocono John) 9. 06:07 PM - Re: Data Plate and airworthiness certificate (Greg Cardinal) 10. 07:00 PM - Re: For your viewing pleasure... (Ray Krause) 11. 08:21 PM - Re: For your viewing pleasure... (Gary Boothe) 12. 08:26 PM - Re: what dates for Brodhead 2015? (Bill Church) 13. 09:11 PM - Re: For your viewing pleasure... (Ray Krause) 14. 09:25 PM - Re: Piet list and BPA slowly dying? (Baldeagle) 15. 10:43 PM - Re: Piet list and BPA slowly dying? (biplan53) ________________________________ Message 1 _____________________________________ Time: 04:24:09 AM PST US From: "Jack Philips" Subject: RE: Pietenpol-List: For your viewing pleasure... Nice, Gary. I would have had to do that trip 3 times to get one landing as good as that one. Jack Phillips NX899JP Smith Mountain Lake, Virginia From: owner-pietenpol-list-server@matronics.com [mailto:owner-pietenpol-list-server@matronics.com] On Behalf Of Gary Boothe Sent: Saturday, January 24, 2015 10:35 PM Subject: RE: Pietenpol-List: For your viewing pleasure... http://youtu.be/H3aWGxwgSuw Gary Boothe NX308MB From: owner-pietenpol-list-server@matronics.com [mailto:owner-pietenpol-list-server@matronics.com] On Behalf Of Gary Boothe Sent: Saturday, January 24, 2015 6:22 PM Subject: Pietenpol-List: For your viewing pleasure... http://www.youtu.be/H3aWGxwgSuw Gary Boothe NX308MB http://www.matronics.com/Navigator?Pietenpol-List http://forums.matronics.com http://www.matronics.com/contribution ________________________________ Message 2 _____________________________________ Time: 06:18:49 AM PST US From: "Gary Boothe" Subject: RE: Pietenpol-List: For your viewing pleasure... Thanks, Jack! I've seen your landings.I know that's a lie. In trying to assess that approach and landing so that I could do it again someday, it suddenly occurred to me..It's the white scarf! "Clothes [really do] Make the Man" - Henri Duvernois. Gary Boothe NX308MB From: owner-pietenpol-list-server@matronics.com [mailto:owner-pietenpol-list-server@matronics.com] On Behalf Of Jack Philips Sent: Sunday, January 25, 2015 4:23 AM Subject: RE: Pietenpol-List: For your viewing pleasure... Nice, Gary. I would have had to do that trip 3 times to get one landing as good as that one. Jack Phillips NX899JP Smith Mountain Lake, Virginia From: owner-pietenpol-list-server@matronics.com [mailto:owner-pietenpol-list-server@matronics.com] On Behalf Of Gary Boothe Sent: Saturday, January 24, 2015 10:35 PM Subject: RE: Pietenpol-List: For your viewing pleasure... http://youtu.be/H3aWGxwgSuw Gary Boothe NX308MB From: owner-pietenpol-list-server@matronics.com [mailto:owner-pietenpol-list-server@matronics.com] On Behalf Of Gary Boothe Sent: Saturday, January 24, 2015 6:22 PM Subject: Pietenpol-List: For your viewing pleasure... http://www.youtu.be/H3aWGxwgSuw Gary Boothe NX308MB http://www.matronics.com/Navigator?Pietenpol-List http://forums.matronics.com http://www.matronics.com/contribution http://www.matronics.com/Navigator?Pietenpol-List http://forums.matronics.com http://www.matronics.com/contribution ________________________________ Message 3 _____________________________________ Time: 06:21:04 AM PST US From: G Bradley Williams Subject: Re: Pietenpol-List: Work list for this weekend ----- Original Message ----- From: "Steven Dortch" Sent: Saturday, January 24, 2015 11:26:09 AM Subject: Pietenpol-List: Work list for this weekend On my list for this weekend. install front shoulder harness attach and burn cut ends on harness. (15 min ) Make another run at painting my access covers. Take Dykes and cut ends on cotterkeys and dress up cotterkeys=C2- (15 min ) Attach the cockpit carb heat control (20 MIN) Install my data plate 15 min Make and mount Wing tank Cover (3 hours+ Not including bringing home and pr iming, painting and reinstalling). Reinstall belly panel (5 min) Make Small side panel (1 hour not including prime paint and reinstall) Screw in rear seat.. I will also get some work done on the tail. If I get most of this done I will be happy. I am also tasked with Smoking a chicken and several honey dos. Now y'all get to work on your planes. Blue Skies, Steve D. -- Blue Skies, Steve D === ________________________________ Message 4 _____________________________________ Time: 07:11:42 AM PST US Subject: Pietenpol-List: Re: Work list for this weekend From: "tools" Uh, Steve, what ya gonna do in the back seat? It may be antiquated, but it IS a family oriented site! Just sayin... Tools Read this topic online here: http://forums.matronics.com/viewtopic.php?p=437613#437613 ________________________________ Message 5 _____________________________________ Time: 08:03:05 AM PST US Subject: Re: Pietenpol-List: For your viewing pleasure... From: Tony Crawford Hello All, I was just wondering if there is any Pietenpol builders in my area? I live in Northern Alabama near the Tennessee Border. Tony tonyp51qa@gmail.com On Sun, Jan 25, 2015 at 8:18 AM, Gary Boothe wrote: > Thanks, Jack! I=99ve seen your landingsI know that =99s a lie. In trying to > assess that approach and landing so that I could do it again someday, it > suddenly occurred to me.It=99s the white scarf! =9CC lothes [really do] Make > the Man=9D - Henri Duvernois. > > > Gary Boothe > > NX308MB > > > *From:* owner-pietenpol-list-server@matronics.com [mailto: > owner-pietenpol-list-server@matronics.com] *On Behalf Of *Jack Philips > *Sent:* Sunday, January 25, 2015 4:23 AM > > *To:* pietenpol-list@matronics.com > *Subject:* RE: Pietenpol-List: For your viewing pleasure... > > > Nice, Gary. I would have had to do that trip 3 times to get one landing > as good as that one. > > > Jack Phillips > > NX899JP > > Smith Mountain Lake, Virginia > > > *From:* owner-pietenpol-list-server@matronics.com [ > mailto:owner-pietenpol-list-server@matronics.com > ] *On Behalf Of *Gary Boothe > *Sent:* Saturday, January 24, 2015 10:35 PM > *To:* pietenpol-list@matronics.com > *Subject:* RE: Pietenpol-List: For your viewing pleasure... > > > http://youtu.be/H3aWGxwgSuw > > > Gary Boothe > > NX308MB > > > *From:* owner-pietenpol-list-server@matronics.com [ > mailto:owner-pietenpol-list-server@matronics.com > ] *On Behalf Of *Gary Boothe > *Sent:* Saturday, January 24, 2015 6:22 PM > *To:* pietenpol-list@matronics.com > *Subject:* Pietenpol-List: For your viewing pleasure... > > > http://www.youtu.be/H3aWGxwgSuw > > > Gary Boothe > > NX308MB > > > *http://www.matronics.com/Navigator?Pietenpol-List * > > > *http://forums.matronics.com * > > > *http://www.matronics.com/contribution * > > > *http://www.matronics.com/Navigator?Pietenpol-List * > > > *http://forums.matronics.com * > > > *http://www.matronics.com/contribution * > > > *http://www.matronics.com/Navigator?Pietenpol-List * > > *http://forums.matronics.com * > > *http://www.matronics.com/contribution * > > > * > =========== .matronics.com/Navigator?Pietenpol-List> =========== =========== om/contribution> =========== > > * > > ________________________________ Message 6 _____________________________________ Time: 04:04:41 PM PST US Subject: Re: Pietenpol-List: For your viewing pleasure... From: danhelsper@aol.com Hi Tony,=0A=0A=0AI am not too far away, in Puryear, TN. I would be glad to show you my Piet any time just let me know. How far along are you?=0A=0A=0ADan Helsper=0ALoensloe Airfie ld=0APuryear, TN=0A=0A=0A=0A-----Original Message-----=0AFrom: Tony Craw ford =0ATo: pietenpol-list =0ASent: Sun, Jan 25, 2015 10:05 am=0ASubject: Re: Pietenpol -List: For your viewing pleasure...=0A=0A=0AHello All,=0AI was jus t wondering if there is any Pietenpol builders in my area? I live in Northern Alabama near the Tennessee Border.=0A=0A=0ATo ny=0A=0A=0Atonyp51qa@gmail.com=0A=0A=0A=0AOn Sun, Jan 25, 2015 at 8: 18 AM, Gary Boothe wrote:=0A=0A=0AThanks, Jac k! I=99ve seen your landingsI know that=99s a lie. In trying to assess that approach and landing so tha t I could do it again someday, it suddenly occurred to me .It=99s the white scarf! =9CClothes [really do] Make the Man=9D - Henri Duvernois.=0A =0A=0AGary Boothe=0ANX 308MB=0A=0A =0A=0AFrom: owner-pietenpol-list-server@matronics.com [mailto: owner-pietenpol-list-server@matronics.com] On Behalf Of Jack Philips=0A Sent: Sunday, January 25, 2015 4:23 AM=0A=0A=0ATo: pietenpol-list@ matronics.com=0ASubject: RE: Pietenpol-List: For your viewing pleasu re...=0A=0A=0A=0A=0A =0ANice, Gary. I would have had to do that trip 3 times to get one landing as good as that one .=0A =0AJack Phillips=0ANX899JP=0ASmith Mountain Lake, Virginia=0A =0A =0AFrom: owner-pietenpol-list-server@matronics.com [mailto:owner-pietenpol-l ist-server@matronics.com] On Behalf Of Gary Boothe=0ASent: Saturday, January 24, 2015 10:35 PM=0ATo: pietenpol-list@matronics.com=0ASubj ect: RE: Pietenpol-List: For your viewing pleasure...=0A=0A =0Ahtt p://youtu.be/H3aWGxwgSuw=0A =0A=0AGary Boothe=0ANX308MB=0A=0A =0A=0AFrom: owner-pietenpol-list-server@matronics.com [mailto:owner-pietenpol-list-server@ matronics.com] On Behalf Of Gary Boothe=0ASent: Saturday, January 24, 2015 6:22 PM=0ATo: pietenpol-list@matronics.com=0ASubject: Pietenp ol-List: For your viewing pleasure...=0A=0A =0Ahttp://www.youtu.be/H3a WGxwgSuw=0A =0AGary Boothe=0ANX308MB=0A =0A =0A =0A =0Ahttp://www.ma tronics.com/Navigator?Pietenpol-List=0A =0Ahttp://forums.matronics.com=0A =0A http://www.matronics.com/contribution=0A =0A =0A =0A =0A =0Ahttp://www .matronics.com/Navigator?Pietenpol-List=0A =0Ahttp://forums.matronics.com=0A =0Ahttp://www.matronics.com/contribution=0A =0A =0A =0A =0A=0A=0A=0A=0A=0A http://www.matronics.com/Navigator?Pietenpol-List=0A=0A=0Ahttp://forums.matronic s.com=0A=0A=0A=0A=0Ahttp://www.matronics.com/contribution=0A=0A =0A=0A=0A=0A=0A =0A" target="_blank">http://www.matronics.com/Navigator?Pietenpol-List=0Atp: //forums.matronics.com=0A_blank">http://www.matronics.com/contribution=0A=0A=0A=0A =========================== =========================== =========================== -Matt Dralle, List Admin.=0A_ =========================== ===========================0A =0A=0A=0A ________________________________ Message 7 _____________________________________ Time: 05:03:25 PM PST US Subject: Pietenpol-List: Re: Data Plate and airworthiness certificate From: "AircamperN11MS" Steve, my data plate is on the forward face of the turtle deck between my shoulder blades. My airworthiness is on the back side of the front seat back. It is out of the windy part of the cockpit and protected by rain or morning dew if left outside at Brodhead. -------- Scott Liefeld Flying N11MS since March 1972 Steel Tube C-85-12 Wire Wheels Brodhead in 1996 Read this topic online here: http://forums.matronics.com/viewtopic.php?p=437635#437635 ________________________________ Message 8 _____________________________________ Time: 05:45:37 PM PST US Subject: Pietenpol-List: what dates for Brodhead 2015? From: "Pocono John" I know the Hatz/Pietenpol gathering is the week before Oshkosh (July 20-26). Does that mean the main Brodhead event is the weekend of the 18th? Just checking so I can get the right vacation week. Thanks. -------- John Read this topic online here: http://forums.matronics.com/viewtopic.php?p=437637#437637 ________________________________ Message 9 _____________________________________ Time: 06:07:43 PM PST US From: "Greg Cardinal" Subject: Re: Pietenpol-List: Data Plate and airworthiness certificate Steve, The dataplate on NX18235 was installed on the forward face of the turtledec k, between my shoulder blades, just like Scott Liefield's. The DAR said we needed an additional dataplate aft of the cockpit so one wa s installed on the aft fuselage just below the stabilizer. The airworthiness certificate is in a ziplock baggie, along with the W&B an d operating limitations, in the helmet box behind the pilot's back. It's never been questioned. Greg Cardinal ----- Original Message ----- From: Steven Dortch To: pietenpol-list@matronics.com Sent: Saturday, January 24, 2015 11:51 AM Subject: Pietenpol-List: Data Plate and airworthiness certificate What is the conventional, and unconventional wisdom on where to attach th e data plate and airworthiness certificate? The FAA says "The ID plate must be secured to the aircraft fuselage exter ior so it is legible to a person on the ground. "Cessna's have them under t he horizontal stab on the left side. My Vtail has it mounted on the fuel pu mp cover inside the cockpit on the floor. The cover is held by about 6 scre ws. Visible from the outside (if you know what you are looking at), but not legible. It has passed muster for 68 years.I am thinking about on the fro nt instrument panel, or on the sidewall inside in the rear cockpit. The Airworthiness certificate must be visible to the crew or passengers. On my Vtail it is in the rear of the baggage area Very visible as people g et in and from the outside. I am thinking about somewhere under the instrum ent panel on the side walls or even on the front wall under the panel. Betw een my feet. What have y'all done and why? (I have searched the archives) Blue Skies, Steve D -- Blue Skies, Steve D --- This email has been checked for viruses by Avast antivirus software. http://www.avast.com ________________________________ Message 10 ____________________________________ Time: 07:00:36 PM PST US From: Ray Krause Subject: Re: Pietenpol-List: For your viewing pleasure... Gary, Beautiful landing! Your paint job sure is nice, but even nicer up close and i n person. Ray Sent from my iPad > On Jan 25, 2015, at 4:22 AM, Jack Philips wrote : > > Nice, Gary. I would have had to do that trip 3 times to get one landing a s good as that one. > > Jack Phillips > NX899JP > Smith Mountain Lake, Virginia > > From: owner-pietenpol-list-server@matronics.com [mailto:owner-pietenpol-li st-server@matronics.com] On Behalf Of Gary Boothe > Sent: Saturday, January 24, 2015 10:35 PM > To: pietenpol-list@matronics.com > Subject: RE: Pietenpol-List: For your viewing pleasure... > > http://youtu.be/H3aWGxwgSuw > > Gary Boothe > NX308MB > > From: owner-pietenpol-list-server@matronics.com [mailto:owner-pietenpol-li st-server@matronics.com] On Behalf Of Gary Boothe > Sent: Saturday, January 24, 2015 6:22 PM > To: pietenpol-list@matronics.com > Subject: Pietenpol-List: For your viewing pleasure... > > http://www.youtu.be/H3aWGxwgSuw > > Gary Boothe > NX308MB > > > > > http://www.matronics.com/Navigator?Pietenpol-List > > http://forums.matronics.com > > http://www.matronics.com/contribution > > > > > http://www.matronics.com/Navigator?Pietenpol-List > http://forums.matronics.com > http://www.matronics.com/contribution > > > 3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3 D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D =3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D 3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3 D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D =3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D 3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3 D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D =3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D 3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3 D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D =3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D > ________________________________ Message 11 ____________________________________ Time: 08:21:26 PM PST US From: "Gary Boothe" Subject: RE: Pietenpol-List: For your viewing pleasure... Thanks, Ray! That was Landing #79. Feeling more comfortable all the time Gary Boothe NX308MB From: owner-pietenpol-list-server@matronics.com [mailto:owner-pietenpol-list-server@matronics.com] On Behalf Of Ray Krause Sent: Sunday, January 25, 2015 7:00 PM Subject: Re: Pietenpol-List: For your viewing pleasure... Gary, Beautiful landing! Your paint job sure is nice, but even nicer up close and in person. Ray Sent from my iPad On Jan 25, 2015, at 4:22 AM, Jack Philips wrote: Nice, Gary. I would have had to do that trip 3 times to get one landing as good as that one. Jack Phillips NX899JP Smith Mountain Lake, Virginia From: owner-pietenpol-list-server@matronics.com [mailto:owner-pietenpol-list-server@matronics.com] On Behalf Of Gary Boothe Sent: Saturday, January 24, 2015 10:35 PM Subject: RE: Pietenpol-List: For your viewing pleasure... http://youtu.be/H3aWGxwgSuw Gary Boothe NX308MB From: owner-pietenpol-list-server@matronics.com [mailto:owner-pietenpol-list-server@matronics.com] On Behalf Of Gary Boothe Sent: Saturday, January 24, 2015 6:22 PM Subject: Pietenpol-List: For your viewing pleasure... http://www.youtu.be/H3aWGxwgSuw Gary Boothe NX308MB http://www.matronics.com/Navigator?Pietenpol-List http://forums.matronics.com http://www.matronics.com/contribution http://www.matronics.com/Navigator?Pietenpol-List http://forums.matronics.com http://www.matronics.com/contribution D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D= 3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D= 3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D= 3D npol-List"">http://www.matronics.com/Navigator?Pietenpol-List D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D= 3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D= 3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D= 3D //forums.matronics.com D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D= 3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D= 3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D= 3D ot;">http://www.matronics.com/contribution D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D= 3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D= 3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D= 3D ________________________________ Message 12 ____________________________________ Time: 08:26:46 PM PST US Subject: Pietenpol-List: Re: what dates for Brodhead 2015? From: "Bill Church" July 16 - 19, 2015. http://www.eaa431.org/calendar-of-events/ Read this topic online here: http://forums.matronics.com/viewtopic.php?p=437644#437644 ________________________________ Message 13 ____________________________________ Time: 09:11:20 PM PST US From: Ray Krause Subject: Re: Pietenpol-List: For your viewing pleasure... Wow, I have many hundreds of landings, only an occasional one that good! Onc e I think I have it figures out, then they are all lousy! Ray Sent from my iPad > On Jan 25, 2015, at 8:20 PM, Gary Boothe wrote: > > Thanks, Ray! That was Landing #79. Feeling more comfortable all the time > > Gary Boothe > NX308MB > > From: owner-pietenpol-list-server@matronics.com [mailto:owner-pietenpol-li st-server@matronics.com] On Behalf Of Ray Krause > Sent: Sunday, January 25, 2015 7:00 PM > To: pietenpol-list@matronics.com > Subject: Re: Pietenpol-List: For your viewing pleasure... > > Gary, > > Beautiful landing! Your paint job sure is nice, but even nicer up close an d in person. > > Ray > > Sent from my iPad > > On Jan 25, 2015, at 4:22 AM, Jack Philips wrote : > > Nice, Gary. I would have had to do that trip 3 times to get one landing a s good as that one. > > Jack Phillips > NX899JP > Smith Mountain Lake, Virginia > > From: owner-pietenpol-list-server@matronics.com [mailto:owner-pietenpol-li st-server@matronics.com] On Behalf Of Gary Boothe > Sent: Saturday, January 24, 2015 10:35 PM > To: pietenpol-list@matronics.com > Subject: RE: Pietenpol-List: For your viewing pleasure... > > http://youtu.be/H3aWGxwgSuw > > Gary Boothe > NX308MB > > From: owner-pietenpol-list-server@matronics.com [mailto:owner-pietenpol-li st-server@matronics.com] On Behalf Of Gary Boothe > Sent: Saturday, January 24, 2015 6:22 PM > To: pietenpol-list@matronics.com > Subject: Pietenpol-List: For your viewing pleasure... > > http://www.youtu.be/H3aWGxwgSuw > > Gary Boothe > NX308MB > > > > > http://www.matronics.com/Navigator?Pietenpol-List > > http://forums.matronics.com > > http://www.matronics.com/contribution > > > > > http://www.matronics.com/Navigator?Pietenpol-List > http://forums.matronics.com > http://www.matronics.com/contribution > > > > D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D= 3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3 D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D > npol-List"">http://www.matronics.com/Navigator?Pietenpol-List > D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D= 3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3 D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D > //forums.matronics.com > D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D= 3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3 D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D > ot;">http://www.matronics.com/contribution > D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D= 3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3 D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D > > > > http://www.matronics.com/Navigator?Pietenpol-List > http://forums.matronics.com > http://www.matronics.com/contribution > > > 3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3 D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D =3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D 3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3 D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D =3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D 3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3 D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D =3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D 3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3 D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D =3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D > ________________________________ Message 14 ____________________________________ Time: 09:25:19 PM PST US Subject: Pietenpol-List: Re: Piet list and BPA slowly dying? From: "Baldeagle" Not to be a stickler for accuracy, but it was the person who posted that photo who said that it was a Pietenpol. Nobody accused the builder of saying that. A number of the comments said that it was a nice looking airplane, but clearly not a Pietenpol, even if it has some of what you call DNA in it. I don't see any of those comments as mean spirited or critical in any way, many were quite complimentary, but maybe that's just me. - -------- do not archive Read this topic online here: http://forums.matronics.com/viewtopic.php?p=437646#437646 ________________________________ Message 15 ____________________________________ Time: 10:43:13 PM PST US Subject: Pietenpol-List: Re: Piet list and BPA slowly dying? From: "biplan53" I might as well put my 2 cents in. When Blumberg put a picture of his plane in the Forum I said it was a nice looking plane. He comes back with a caustic reply that he didn't put his picture in here for compliments. Since then I come to the conclusion that if you are not in the higher anarchy you are not much welcome. I know this sounds like sour grapes,but I have talked to other people and they think so too. It's a bad situation when you go to The Biplan forum and the people are a lot friendlier. I know there are a lot of good people like Terry Hand and others who are helpful and fun to talk to. -------- Building steel fuselage aircamper. Read this topic online here: http://forums.matronics.com/viewtopic.php?p=437647#437647 ------------------------------------------------------------------------------------- Other Matronics Email List Services ------------------------------------------------------------------------------------- Post A New Message pietenpol-list@matronics.com UN/SUBSCRIBE http://www.matronics.com/subscription List FAQ http://www.matronics.com/FAQ/Pietenpol-List.htm Web Forum Interface To Lists http://forums.matronics.com Matronics List Wiki http://wiki.matronics.com Full Archive Search Engine http://www.matronics.com/search 7-Day List Browse http://www.matronics.com/browse/pietenpol-list Browse Digests http://www.matronics.com/digest/pietenpol-list Browse Other Lists http://www.matronics.com/browse Live Online Chat! http://www.matronics.com/chat Archive Downloading http://www.matronics.com/archives Photo Share http://www.matronics.com/photoshare Other Email Lists http://www.matronics.com/emaillists Contributions http://www.matronics.com/contribution ------------------------------------------------------------------------------------- These Email List Services are sponsored solely by Matronics and through the generous Contributions of its members.