---------------------------------------------------------- Pietenpol-List Digest Archive --- Total Messages Posted Tue 08/11/15: 9 ---------------------------------------------------------- Today's Message Index: ---------------------- 1. 07:24 AM - Re: Fuselage Width (echobravo4) 2. 08:23 AM - Re: Fuselage Width (Ryan Mueller) 3. 10:58 AM - Re: BPA Newsletter PDF (pjb) 4. 11:59 AM - Re: Re: Fuselage Width (Charles N. Campbell) 5. 12:21 PM - Re: Re: BPA Newsletter PDF (Charles N. Campbell) 6. 01:56 PM - Re: Fuselage Width (tools) 7. 03:03 PM - Re: BPA Newsletter PDF (jarheadpilot82) 8. 08:01 PM - Re: Re: BPA Newsletter PDF (Ray Krause) 9. 08:47 PM - Re: Re: BPA Newsletter PDF (John Hofmann) ________________________________ Message 1 _____________________________________ Time: 07:24:36 AM PST US Subject: Pietenpol-List: Re: Fuselage Width From: "echobravo4" Kyle might know- 517-663-3083 -------- Earl Brown I may not have gone where I intended to go, but I think I have ended up where I intended to be. Read this topic online here: http://forums.matronics.com/viewtopic.php?p=445822#445822 ________________________________ Message 2 _____________________________________ Time: 08:23:02 AM PST US Subject: Pietenpol-List: Re: Fuselage Width From: "Ryan Mueller" You may certainly do what you'd like, but insofar as answering your question, if you reference Drawing No. 1 (the sheet with the various fuselage views), and look at the third view down (Inside Constructional View Of Fuselage), you should see a note at the 22" width measurement at the rear seat back: "All Measurements To Outside Of Plywood" Read this topic online here: http://forums.matronics.com/viewtopic.php?p=445824#445824 ________________________________ Message 3 _____________________________________ Time: 10:58:29 AM PST US Subject: Pietenpol-List: Re: BPA Newsletter PDF From: "pjb" Hello, I've been trying to join the BPA for years ! Every so often, I send an email to the website asking for info on joining and payment method [ I live in Canada] but so far, there has been no reply. Could anyone give me an email address that will reply to me ! I used to have a Pietenpol years ago and am now about to have the final inspection done on my current Piet. Cheers, Patricia Read this topic online here: http://forums.matronics.com/viewtopic.php?p=445829#445829 ________________________________ Message 4 _____________________________________ Time: 11:59:59 AM PST US Subject: Re: Pietenpol-List: Re: Fuselage Width From: "Charles N. Campbell" Ryan, as many times as I have looked at that drawing since I began construction on my Piet, that is the FIRST time I have read that note. I made all my measurements to the outside of the longerons. So, I guess my fuselage is 1/4-inch wider than it should be. I haven't measured the width of the cabane strut fittings on the fuselage as compared to the fittings on the wing center section. I don't think 1/8 inch on each side would hurt that much. Chuck On Tue, Aug 11, 2015 at 11:22 AM, Ryan Mueller wrote: > > > > You may certainly do what you'd like, but insofar as answering your > question, if you reference Drawing No. 1 (the sheet with the various > fuselage views), and look at the third view down (Inside Constructional > View Of Fuselage), you should see a note at the 22" width measurement at > the rear seat back: > > "All Measurements To Outside Of Plywood" > > > Read this topic online here: > > http://forums.matronics.com/viewtopic.php?p=445824#445824 > > ________________________________ Message 5 _____________________________________ Time: 12:21:33 PM PST US Subject: Re: Pietenpol-List: Re: BPA Newsletter PDF From: "Charles N. Campbell" =8BPatricia, I tried to scan the last page of my latest copy of BPA newsletter which contains the method of joining BPA. If you will give me your address, I will send you a copy of the documentation on how to join. Chuck, charlescampbell1924@gmail.com=8B On Tue, Aug 11, 2015 at 1:57 PM, pjb wrote: > > Hello, > > I've been trying to join the BPA for years ! > > Every so often, I send an email to the website asking for info > on joining and payment method [ I live in Canada] but > so far, there has been no reply. > > Could anyone give me an email address that will reply to me ! > > I used to have a Pietenpol years ago and am now about to > have the final inspection done on my current Piet. > > Cheers, > Patricia > > > Read this topic online here: > > http://forums.matronics.com/viewtopic.php?p=445829#445829 > > =========== =========== =========== =========== > > ________________________________ Message 6 _____________________________________ Time: 01:56:42 PM PST US Subject: Pietenpol-List: Re: Fuselage Width From: "tools" The plans are a bit like a jeppesen approach plate.... TONS of info in there, easy to miss something. That quarter inch isn't going to matter. If you haven't drilled any of the fittings, when you do, start with undersized holes and step them up to proper size with all the pieces together. Basically cut to fit as you go if that makes sense. It'll keep thing more aligned and make life easier during assembly. Tools Read this topic online here: http://forums.matronics.com/viewtopic.php?p=445836#445836 ________________________________ Message 7 _____________________________________ Time: 03:03:58 PM PST US Subject: Pietenpol-List: Re: BPA Newsletter PDF From: "jarheadpilot82" John, Am I reading this correctly - the current issue says "4th Quarter, 2014"? I guess that is why I paid for a 2 year subscription last fall, but have yet to see an issue sent to my home address. I have written you several emails about my subscription but I have not heard from you, so I see no other option but to write you via the forum. Could you please explain to me and to the other subscribers as to what your plan is to get the newsletter back on a regular, more scheduled track? I appreciate it. And in case my previous emails went to your spam folder - 1750 Autumn Park Statham GA 30666-3636 -------- Semper Fi, Terry Hand Athens, GA Read this topic online here: http://forums.matronics.com/viewtopic.php?p=445841#445841 ________________________________ Message 8 _____________________________________ Time: 08:01:15 PM PST US From: Ray Krause Subject: Re: Pietenpol-List: Re: BPA Newsletter PDF Patricia, Please send us some info on your Pietenpol, we need to know! Thanks, Ray Krause Sent from my iPad > On Aug 11, 2015, at 10:57 AM, pjb wrote: > > > Hello, > > I've been trying to join the BPA for years ! > > Every so often, I send an email to the website asking for info > on joining and payment method [ I live in Canada] but > so far, there has been no reply. > > Could anyone give me an email address that will reply to me ! > > I used to have a Pietenpol years ago and am now about to > have the final inspection done on my current Piet. > > Cheers, > Patricia > > > > > Read this topic online here: > > http://forums.matronics.com/viewtopic.php?p=445829#445829 > > > > > > > > > > ________________________________ Message 9 _____________________________________ Time: 08:47:57 PM PST US Subject: Re: Pietenpol-List: Re: BPA Newsletter PDF From: John Hofmann Yes I am behind. As I have stated in the past, there are 600 plus subscribers and no one sending in any content or articles. Until the last few weeks when Jack Phillips sent me a few articles and Douwe beat the bushes for content, I have received basically nothing. I now have a bit of content and plan to put another issue out in September and every two months until caught up. Everyone will get what they have paid for and most will get a couple of extra issues since I am behind. My records have you being sent three paper issues since you subscribed. If you have not received the first two, I will send them out to you on Monday when I am back in the office. Since the current issue is still making its way through the bulk mail mule train, I need to wait a couple more weeks before I send that one out first class. Best, -john- > On Aug 11, 2015, at 5:03 PM, jarheadpilot82 wrote: > > > John, > > Am I reading this correctly - the current issue says "4th Quarter, 2014"? I guess that is why I paid for a 2 year subscription last fall, but have yet to see an issue sent to my home address. > > I have written you several emails about my subscription but I have not heard from you, so I see no other option but to write you via the forum. Could you please explain to me and to the other subscribers as to what your plan is to get the newsletter back on a regular, more scheduled track? > > I appreciate it. > > And in case my previous emails went to your spam folder - > > 1750 Autumn Park > Statham GA 30666-3636 > > -------- > Semper Fi, > > Terry Hand > Athens, GA > > > > > Read this topic online here: > > http://forums.matronics.com/viewtopic.php?p=445841#445841 > > > > > > > > > > ------------------------------------------------------------------------------------- Other Matronics Email List Services ------------------------------------------------------------------------------------- Post A New Message pietenpol-list@matronics.com UN/SUBSCRIBE http://www.matronics.com/subscription List FAQ http://www.matronics.com/FAQ/Pietenpol-List.htm Web Forum Interface To Lists http://forums.matronics.com Matronics List Wiki http://wiki.matronics.com Full Archive Search Engine http://www.matronics.com/search 7-Day List Browse http://www.matronics.com/browse/pietenpol-list Browse Digests http://www.matronics.com/digest/pietenpol-list Browse Other Lists http://www.matronics.com/browse Live Online Chat! http://www.matronics.com/chat Archive Downloading http://www.matronics.com/archives Photo Share http://www.matronics.com/photoshare Other Email Lists http://www.matronics.com/emaillists Contributions http://www.matronics.com/contribution ------------------------------------------------------------------------------------- These Email List Services are sponsored solely by Matronics and through the generous Contributions of its members.