---------------------------------------------------------- Pietenpol-List Digest Archive --- Total Messages Posted Sat 01/23/16: 4 ---------------------------------------------------------- Today's Message Index: ---------------------- 1. 06:54 AM - gussets grain orientation - empenage (rudder,fin,elevator,stabilizator) (Hyvris (Petr Ludera)) 2. 08:31 AM - Re: gussets grain orientation - empenage (rudder,fin,elevator,stabilizator) (larharris2 Harris) 3. 10:01 AM - Re: gussets grain orientation - empenage (rudder,fin,elevator,stabilizator) (vic groah) 4. 10:20 AM - Re: gussets grain orientation - empenage (rudder,fin,elevator,stabilizator) (Ray Krause) ________________________________ Message 1 _____________________________________ Time: 06:54:49 AM PST US Subject: Pietenpol-List: gussets grain orientation - empenage (rudder,fin,elevator,stabilizator) From: "Hyvris (Petr Ludera)" Hello everyone, this is my first post to the list, Im Pietenpol builder from Czech republic (central europe). This list is so perfect, too much informations at one place! I have a little problem. Now i start to build empenage sections. Just drawed full scale plans. And now my question. Which orientation of grain at gussets on empenage is correct? In original plans i didnt find any word about it... At attachment is part of original plans, if someone could draw the grain directions i will be very happy :-)) Thanks a lot, Petr Ludera Czech republic ________________________________ Message 2 _____________________________________ Time: 08:31:57 AM PST US From: larharris2 Harris Subject: RE: Pietenpol-List: gussets grain orientation - empenage (rudder,fin,elevator,stabilizator) Welcome=2C Petr. Maybe others will disagree=2C but I did not care about direction of grain i n the gussets. Gusset material is plywood. Interior layers of the ply will have grain direction 90 degrees to the surface ply. I tried to cut my gusse ts to make the best use of my material=2C with the least waste. Lorenzo Subject: Pietenpol-List: gussets grain orientation - empenage (rudder=2Cfin =2Celevator=2Cstabilizator) From: hyvris@gmail.com Hello everyone=2C this is my first post to the list=2C Im Pietenpol builder from Czech republ ic (central europe). This list is so perfect=2C too much informations at on e place! I have a little problem. Now i start to build empenage sections. Just drawe d full scale plans. And now my question. Which orientation of grain at guss ets on empenage is correct? In original plans i didnt find any word about i t... At attachment is part of original plans=2C if someone could draw the g rain directions i will be very happy :-)) Thanks a lot=2C Petr Ludera Czech republic ________________________________ Message 3 _____________________________________ Time: 10:01:05 AM PST US Subject: Re: Pietenpol-List: gussets grain orientation - empenage (rudder,fin,elevator,stabilizator) From: vic groah I agree with Lorenzo, the gain orientation is not a major issue with ply, You are to be complimented on your care for doing things correctly. Keep up the good work. Vic On Sat, Jan 23, 2016 at 8:29 AM, larharris2 Harris wrote: > Welcome, Petr. > Maybe others will disagree, but I did not care about direction of grain in > the gussets. Gusset material is plywood. Interior layers of the ply will > have grain direction 90 degrees to the surface ply. I tried to cut my > gussets to make the best use of my material, with the least waste. > > Lorenzo > > > ------------------------------ > Date: Sat, 23 Jan 2016 15:34:14 +0100 > Subject: Pietenpol-List: gussets grain orientation - empenage > (rudder,fin,elevator,stabilizator) > From: hyvris@gmail.com > To: pietenpol-list@matronics.com > > > Hello everyone, > > this is my first post to the list, Im Pietenpol builder from Czech > republic (central europe). This list is so perfect, too much informations > at one place! > > > I have a little problem. Now i start to build empenage sections. Just > drawed full scale plans. And now my question. Which orientation of grain at > gussets on empenage is correct? In original plans i didnt find any word > about it... At attachment is part of original plans, if someone could draw > the grain directions i will be very happy :-)) > > > Thanks a lot, > Petr Ludera > Czech republic > ________________________________ Message 4 _____________________________________ Time: 10:20:09 AM PST US From: Ray Krause Subject: Re: Pietenpol-List: gussets grain orientation - empenage (rudder,fin,elevator,stabilizator) I did the same. Just use good aircraft/marine three ply plywood and cut with out regard for the grain. Life is simple! Ray Krause Building SkyScout Sent from my iPad > On Jan 23, 2016, at 8:29 AM, larharris2 Harris wrote: > > Welcome, Petr. > Maybe others will disagree, but I did not care about direction of grain in the gussets. Gusset material is plywood. Interior layers of the ply will ha ve grain direction 90 degrees to the surface ply. I tried to cut my gussets t o make the best use of my material, with the least waste. > > Lorenzo > > > Date: Sat, 23 Jan 2016 15:34:14 +0100 > Subject: Pietenpol-List: gussets grain orientation - empenage (rudder,fin, elevator,stabilizator) > From: hyvris@gmail.com > To: pietenpol-list@matronics.com > > Hello everyone, > > this is my first post to the list, Im Pietenpol builder from Czech republi c (central europe). This list is so perfect, too much informations at one pl ace! > > > I have a little problem. Now i start to build empenage sections. Just draw ed full scale plans. And now my question. Which orientation of grain at guss ets on empenage is correct? In original plans i didnt find any word about it ... At attachment is part of original plans, if someone could draw the grain directions i will be very happy :-)) > > > Thanks a lot, > Petr Ludera > Czech republic ------------------------------------------------------------------------------------- Other Matronics Email List Services ------------------------------------------------------------------------------------- Post A New Message pietenpol-list@matronics.com UN/SUBSCRIBE http://www.matronics.com/subscription List FAQ http://www.matronics.com/FAQ/Pietenpol-List.htm Web Forum Interface To Lists http://forums.matronics.com Matronics List Wiki http://wiki.matronics.com Full Archive Search Engine http://www.matronics.com/search 7-Day List Browse http://www.matronics.com/browse/pietenpol-list Browse Digests http://www.matronics.com/digest/pietenpol-list Browse Other Lists http://www.matronics.com/browse Live Online Chat! http://www.matronics.com/chat Archive Downloading http://www.matronics.com/archives Photo Share http://www.matronics.com/photoshare Other Email Lists http://www.matronics.com/emaillists Contributions http://www.matronics.com/contribution ------------------------------------------------------------------------------------- These Email List Services are sponsored solely by Matronics and through the generous Contributions of its members.