---------------------------------------------------------- Pietenpol-List Digest Archive --- Total Messages Posted Wed 02/10/16: 6 ---------------------------------------------------------- Today's Message Index: ---------------------- 1. 06:19 AM - Re: Ordering metal (bdewenter) 2. 06:21 AM - Re: Engine mount bolt lengths (bdewenter) 3. 07:59 AM - Re: Ordering metal (Pocono John) 4. 02:43 PM - Re: Ordering metal (tools) 5. 02:57 PM - Re: Ordering metal (Pocono John) 6. 03:32 PM - Re: Ordering metal (tools) ________________________________ Message 1 _____________________________________ Time: 06:19:01 AM PST US Subject: Pietenpol-List: Re: Ordering metal From: "bdewenter" John, MANY of the fittings can be made from "strip steel" in various gauges, widths and lengths. You can cut these up with a simple hack saw (with the BEST blades money can buy) very quickly. Obviously the larger metal fitting need to come from sheet. Consider getting your larger parts water jet cut. -------- Bob 'Early Builder' Dewenter Dayton OH Read this topic online here: http://forums.matronics.com/viewtopic.php?p=452744#452744 ________________________________ Message 2 _____________________________________ Time: 06:21:17 AM PST US Subject: Pietenpol-List: Re: Engine mount bolt lengths From: "bdewenter" Page 192 of the manual states AN6-36 and in the instructions for the motor mount state AN6-36 -------- Bob 'Early Builder' Dewenter Dayton OH Read this topic online here: http://forums.matronics.com/viewtopic.php?p=452745#452745 ________________________________ Message 3 _____________________________________ Time: 07:59:44 AM PST US Subject: Pietenpol-List: Re: Ordering metal From: "Pocono John" Thanks Bob. The plans don't mention (or I missed it) what type steel. Do builders use 4130, something else, or steel bought locally (like Tractor Supply)? I have a metal cutting band saw and I can drill and ream holes. The one company for water jet is priceywill see about it when the time comes. I found a great page on the website "Pete's Pietenpol" that listed in detail the metal parts required. I'll use that to make a shopping list. -------- John Read this topic online here: http://forums.matronics.com/viewtopic.php?p=452749#452749 ________________________________ Message 4 _____________________________________ Time: 02:43:27 PM PST US Subject: Pietenpol-List: Re: Ordering metal From: "tools" Yep, you want 4130 for everything. I think the plans mention1020 or something, so 4130 isn't "necessary", but is widely accepted as the way to go. If you have a metal cutting contour saw, vertical, water jetting isn't necessary, just a matter of time vs money. With nothing but a hacksaw... Ya, probably a little higher on the priority list! The only real advice I have to add is to really consider the holes. If a hole is to be matched up with another part, sometimes wise to drill both at once, or use one part to locate the matching hole. It's possible you will save some frustration by trying your best to visualize those sorts of situations and planning ahead. Generally, it's a pretty straight forward job! Tools Read this topic online here: http://forums.matronics.com/viewtopic.php?p=452753#452753 ________________________________ Message 5 _____________________________________ Time: 02:57:40 PM PST US Subject: Pietenpol-List: Re: Ordering metal From: "Pocono John" Thanks Tools! Previous to this project, I made all the brackets for a Hatz Classic and doubled the parts for drilling/reaming. After all that, realized I'd rather have a plane in a few years instead of 12 or moreso Hatz will be my retirement project. OK, I'll get more 4130. Thanks again! -------- John Read this topic online here: http://forums.matronics.com/viewtopic.php?p=452754#452754 ________________________________ Message 6 _____________________________________ Time: 03:32:40 PM PST US Subject: Pietenpol-List: Re: Ordering metal From: "tools" I didn't build my Piet, but have done extensive work on it. I'm now working on (extensive repairs) a starduster too... WOW! Probably ten times the parts? Practically ALL of them more complicated than anything on a Piet! I definitely see where you're coming from! Tools Read this topic online here: http://forums.matronics.com/viewtopic.php?p=452755#452755 ------------------------------------------------------------------------------------- Other Matronics Email List Services ------------------------------------------------------------------------------------- Post A New Message pietenpol-list@matronics.com UN/SUBSCRIBE http://www.matronics.com/subscription List FAQ http://www.matronics.com/FAQ/Pietenpol-List.htm Web Forum Interface To Lists http://forums.matronics.com Matronics List Wiki http://wiki.matronics.com Full Archive Search Engine http://www.matronics.com/search 7-Day List Browse http://www.matronics.com/browse/pietenpol-list Browse Digests http://www.matronics.com/digest/pietenpol-list Browse Other Lists http://www.matronics.com/browse Live Online Chat! http://www.matronics.com/chat Archive Downloading http://www.matronics.com/archives Photo Share http://www.matronics.com/photoshare Other Email Lists http://www.matronics.com/emaillists Contributions http://www.matronics.com/contribution ------------------------------------------------------------------------------------- These Email List Services are sponsored solely by Matronics and through the generous Contributions of its members.