---------------------------------------------------------- Pietenpol-List Digest Archive --- Total Messages Posted Sat 11/19/16: 7 ---------------------------------------------------------- Today's Message Index: ---------------------- 0. 10:34 AM - Please Make a Contribution to Support Your Lists... (Matt Dralle) 1. 03:19 AM - Re: Stuff to add to epoxy (John Woods) 2. 06:10 AM - Re: Stuff to add to epoxy (Steven Dortch) 3. 06:13 AM - Re: Stuff to add to epoxy (Steven Dortch) 4. 06:16 AM - Re: Stuff to add to epoxy (Steven Dortch) 5. 06:55 AM - Re: Stuff to add to epoxy (Mark Baxter) 6. 07:00 AM - Re: Stuff to add to epoxy (Robert Rice) ________________________________ Message 0 _____________________________________ Time: 10:34:16 AM PST US From: Matt Dralle Subject: Pietenpol-List: Please Make a Contribution to Support Your Lists... Dear Listers, Just a reminder that November is the Annual List Fund Raiser. Please make a Contribution today to support the continued operation and upgrade of these great List services!! Pick up a really nice free gift with your qualifying Contribution too! The Contribution Site is fast and easy: http://www.matronics.com/contribution or by dropping a personal check in the mail to: Matt Dralle / Matronics 581 Jeannie Way Livermore CA 94550 Thank you! Matt Dralle Matronics Email List Administrator ________________________________ Message 1 _____________________________________ Time: 03:19:07 AM PST US From: John Woods Subject: Re: Pietenpol-List: Stuff to add to epoxy Tim, The West Systems filler I've use is 406 Colloidal Silica. http://www.westsystem.com/ss/406-colloidal-silica/ 403 Microfibres is also suitable. http://www.westsystem.com/ss/403-microfibers/ JohnW On 19 November 2016 at 13:37, Timothy Willis wrote: > =8B > Guys, > > I have an application where I need more viscosity in my West systems > epoxy. I have the little micro-beads to use when all I need is a filler, > but I know that is NOT the right stuff when I need glue strength. > > What is the right additive? Where can I get it? I could not find such a > thing on ASS, but then it helps to know its name. > > Thanks, > Tim in central TX > ________________________________ Message 2 _____________________________________ Time: 06:10:47 AM PST US From: Steven Dortch Subject: Re: Pietenpol-List: Stuff to add to epoxy Slightly related, I put just a little sand in my West System 205 when I did my floorboards to give me a little grip when getting in and out. I enjoyed using west systems epoxy. It went on just as advertised. Blue Skies, Steve D On Sat, Nov 19, 2016 at 5:18 AM, John Woods wrote: > Tim, > > The West Systems filler I've use is 406 Colloidal Silica. > http://www.westsystem.com/ss/406-colloidal-silica/ > 403 Microfibres is also suitable. http://www.westsystem.com/ss/403- > microfibers/ > > JohnW > > On 19 November 2016 at 13:37, Timothy Willis > wrote: > >> =8B >> Guys, >> >> I have an application where I need more viscosity in my West systems >> epoxy. I have the little micro-beads to use when all I need is a filler , >> but I know that is NOT the right stuff when I need glue strength. >> >> What is the right additive? Where can I get it? I could not find such >> a thing on ASS, but then it helps to know its name. >> >> Thanks, >> Tim in central TX >> > > -- Blue Skies, Steve D ________________________________ Message 3 _____________________________________ Time: 06:13:17 AM PST US From: Steven Dortch Subject: Re: Pietenpol-List: Stuff to add to epoxy Their website. http://www.westsystem.com/ss/the-105-system/ On Sat, Nov 19, 2016 at 8:10 AM, Steven Dortch wrote: > Slightly related, I put just a little sand in my West System 205 when I > did my floorboards to give me a little grip when getting in and out. > > I enjoyed using west systems epoxy. It went on just as advertised. > > Blue Skies, > Steve D > > On Sat, Nov 19, 2016 at 5:18 AM, John Woods wrote: > >> Tim, >> >> The West Systems filler I've use is 406 Colloidal Silica. >> http://www.westsystem.com/ss/406-colloidal-silica/ >> 403 Microfibres is also suitable. http://www.westsyste >> m.com/ss/403-microfibers/ >> >> JohnW >> >> On 19 November 2016 at 13:37, Timothy Willis >> wrote: >> >>> =8B >>> Guys, >>> >>> I have an application where I need more viscosity in my West systems >>> epoxy. I have the little micro-beads to use when all I need is a fille r, >>> but I know that is NOT the right stuff when I need glue strength. >>> >>> What is the right additive? Where can I get it? I could not find suc h >>> a thing on ASS, but then it helps to know its name. >>> >>> Thanks, >>> Tim in central TX >>> >> >> > > > -- > Blue Skies, > Steve D > -- Blue Skies, Steve D ________________________________ Message 4 _____________________________________ Time: 06:16:22 AM PST US From: Steven Dortch Subject: Re: Pietenpol-List: Stuff to add to epoxy Early morning and only a half cup of coffee in me. If I remember correctly for more viscosity you can put in less hardener. BUT I may be wrong. They do have 405 high density filler. I have had good luck finding their products as Marine stores. Used a lot on boats. Blue Skies, Steve D On Sat, Nov 19, 2016 at 8:12 AM, Steven Dortch wrote: > Their website. > > http://www.westsystem.com/ss/the-105-system/ > > > On Sat, Nov 19, 2016 at 8:10 AM, Steven Dortch > wrote: > >> Slightly related, I put just a little sand in my West System 205 when I >> did my floorboards to give me a little grip when getting in and out. >> >> I enjoyed using west systems epoxy. It went on just as advertised. >> >> Blue Skies, >> Steve D >> >> On Sat, Nov 19, 2016 at 5:18 AM, John Woods wrote: >> >>> Tim, >>> >>> The West Systems filler I've use is 406 Colloidal Silica. >>> http://www.westsystem.com/ss/406-colloidal-silica/ >>> 403 Microfibres is also suitable. http://www.westsyste >>> m.com/ss/403-microfibers/ >>> >>> JohnW >>> >>> On 19 November 2016 at 13:37, Timothy Willis >>> wrote: >>> >>>> =8B >>>> Guys, >>>> >>>> I have an application where I need more viscosity in my West systems >>>> epoxy. I have the little micro-beads to use when all I need is a fill er, >>>> but I know that is NOT the right stuff when I need glue strength. >>>> >>>> What is the right additive? Where can I get it? I could not find >>>> such a thing on ASS, but then it helps to know its name. >>>> >>>> Thanks, >>>> Tim in central TX >>>> >>> >>> >> >> >> -- >> Blue Skies, >> Steve D >> > > > -- > Blue Skies, > Steve D > -- Blue Skies, Steve D ________________________________ Message 5 _____________________________________ Time: 06:55:59 AM PST US Subject: Pietenpol-List: Re: Stuff to add to epoxy From: "Mark Baxter" The stuff you want is 404 high density filler. It is specifically for bonding and can be added in amounts needed to get desired viscosity. Mark Baxter GN-1 Corvallis, Oregon Read this topic online here: http://forums.matronics.com/viewtopic.php?p=462751#462751 ________________________________ Message 6 _____________________________________ Time: 07:00:36 AM PST US From: Robert Rice Subject: Re: Pietenpol-List: Stuff to add to epoxy blockquote, div.yahoo_quoted { margin-left: 0 !important; border-left:1px #715FFA solid !important; padding-left:1ex !important; background-color:whi te !important; } Do not change the resin to hardner ratio for West System Epoxy. They sell metered pumps to help get it right. Sent from Yahoo Mail for iPhone On Saturday, November 19, 2016, 9:15 AM, Steven Dortch wrote: Early morning and only a half cup of coffee in me. If I remember correctly for more viscosity you can put in less hardener. BUT I may be wrong. They do have 405 high density filler. I have had good luck finding their products as Marine stores. Used a lot on boats. Blue Skies, Steve D On Sat, Nov 19, 2016 at 8:12 AM, Steven Dortch wrote: Their website. http://www.westsystem.com/ss/ the-105-system/ On Sat, Nov 19, 2016 at 8:10 AM, Steven Dortch wrote: Slightly related, I put just a little sand in my West System 205 when I did my floorboards to give me a little grip when getting in and out. I enjoyed using west systems epoxy. It went on just as advertised. Blue Skies, Steve D On Sat, Nov 19, 2016 at 5:18 AM, John Woods wrote: Tim, The West Systems filler I've use is 406 Colloidal Silica. =C2-http://www. westsystem.com/ss/ 406-colloidal-silica/403 Microfibres is also suitable. =C2-http://www.westsyste m.com/ss/403-microfibers/ JohnW On 19 November 2016 at 13:37, Timothy Willis wrote: =8BGuys, I have an application where I need more viscosity in my West systems epoxy. =C2- I have the little micro-beads to use when all I need is a filler, bu t I know that is NOT the right stuff when I need glue strength. What is the right additive?=C2- Where can I get it?=C2- =C2-I could n ot find such a thing on ASS, but then it helps to know its name. Thanks,Tim in central TX -- Blue Skies, Steve D -- Blue Skies, Steve D -- Blue Skies, Steve D ------------------------------------------------------------------------------------- Other Matronics Email List Services ------------------------------------------------------------------------------------- Post A New Message pietenpol-list@matronics.com UN/SUBSCRIBE http://www.matronics.com/subscription List FAQ http://www.matronics.com/FAQ/Pietenpol-List.htm Web Forum Interface To Lists http://forums.matronics.com Matronics List Wiki http://wiki.matronics.com Full Archive Search Engine http://www.matronics.com/search 7-Day List Browse http://www.matronics.com/browse/pietenpol-list Browse Digests http://www.matronics.com/digest/pietenpol-list Browse Other Lists http://www.matronics.com/browse Live Online Chat! http://www.matronics.com/chat Archive Downloading http://www.matronics.com/archives Photo Share http://www.matronics.com/photoshare Other Email Lists http://www.matronics.com/emaillists Contributions http://www.matronics.com/contribution ------------------------------------------------------------------------------------- These Email List Services are sponsored solely by Matronics and through the generous Contributions of its members.