---------------------------------------------------------- Pietenpol-List Digest Archive --- Total Messages Posted Wed 05/24/17: 4 ---------------------------------------------------------- Today's Message Index: ---------------------- 1. 10:57 AM - The new aluminum head for the Jeepenpol (aviken) 2. 08:00 PM - Re: The new aluminum head for the Jeepenpol (taildrags) 3. 08:18 PM - Re: The new aluminum head for the Jeepenpol (Steven Dortch) 4. 08:30 PM - New to me Piet Project (Brent Wilson) ________________________________ Message 1 _____________________________________ Time: 10:57:49 AM PST US Subject: Pietenpol-List: The new aluminum head for the Jeepenpol From: "aviken" For those who don't know , I have installed a newly made aluminum head on the Jeep engine . It is a 7.5 to 1 compression ratio head , with better design combustion chamber, Like a Hemi . I added that part myself. I have noticed a increase in overall rpm , Not world changing but better. My friend in Australia that built it for me has asked me to add that this head is not back in production at this time , but was only done as a favor to the Jeepenpol, because it was interesting to him. Hopefully his son and grandson will take up the project and sometime in the future continue to make available the beautiful head. I have been testing and flying up till now to improve the performance of the jeepenpol. Now I intend to do some indurance flying and see what altitude I can reasonably be able reach and to asure myself that it would be possible to reach Brodhead Wisconsin , which is my goal. I have to burn some hours to reach the 40 hour mark at this time I have 5 flight hours .. Read this topic online here: http://forums.matronics.com/viewtopic.php?p=469583#469583 Attachments: http://forums.matronics.com//files/untitled_18_205.png ________________________________ Message 2 _____________________________________ Time: 08:00:04 PM PST US Subject: Pietenpol-List: Re: The new aluminum head for the Jeepenpol From: "taildrags" Some people create masterpieces with oil, brushes, and canvas. Others create works of art and functional genius in aluminum. That's a beautiful Jeepenpol head. -------- Oscar Zuniga Medford, OR Air Camper NX41CC "Scout" A75 power, 72x36 Culver prop Read this topic online here: http://forums.matronics.com/viewtopic.php?p=469589#469589 ________________________________ Message 3 _____________________________________ Time: 08:18:50 PM PST US From: Steven Dortch Subject: Re: Pietenpol-List: The new aluminum head for the Jeepenpol Kenny, did you see the posts about my whippet engine? On May 24, 2017 12:59 PM, "aviken" wrote: For those who don't know , I have installed a newly made aluminum head on the Jeep engine . It is a 7.5 to 1 compression ratio head , with better design combustion chamber, Like a Hemi . I added that part myself. I have noticed a increase in overall rpm , Not world changing but better. My friend in Australia that built it for me has asked me to add that this head is not back in production at this time , but was only done as a favor to the Jeepenpol, because it was interesting to him. Hopefully his son and grandson will take up the project and sometime in the future continue to make available the beautiful head. I have been testing and flying up till now to improve the performance of the jeepenpol. Now I intend to do some indurance flying and see what altitude I can reasonably be able reach and to asure myself that it would be possible to reach Brodhead Wisconsin , which is my goal. I have to burn some hours to reach the 40 hour mark at this time I have 5 flight hours . Read this topic online here: http://forums.matronics.com/viewtopic.php?p=469583#469583 Attachments: http://forums.matronics.com//files/untitled_18_205.png ________________________________ Message 4 _____________________________________ Time: 08:30:11 PM PST US Subject: Pietenpol-List: New to me Piet Project From: "Brent Wilson" I traveled to Madison Wisconsin from Wyoming last weekend and picked up a started project from Dave Jeardeau. I made it home and am preparing to start on the completion of the project. I have a good start and am pretty excited to get in the middle of it. Any words of encouragement will be appreciated! Read this topic online here: http://forums.matronics.com/viewtopic.php?p=469591#469591 Attachments: http://forums.matronics.com//files/image_206.jpeg http://forums.matronics.com//files/image_295.jpeg ------------------------------------------------------------------------------------- Other Matronics Email List Services ------------------------------------------------------------------------------------- Post A New Message pietenpol-list@matronics.com UN/SUBSCRIBE http://www.matronics.com/subscription List FAQ http://www.matronics.com/FAQ/Pietenpol-List.htm Web Forum Interface To Lists http://forums.matronics.com Matronics List Wiki http://wiki.matronics.com Full Archive Search Engine http://www.matronics.com/search 7-Day List Browse http://www.matronics.com/browse/pietenpol-list Browse Digests http://www.matronics.com/digest/pietenpol-list Browse Other Lists http://www.matronics.com/browse Live Online Chat! http://www.matronics.com/chat Archive Downloading http://www.matronics.com/archives Photo Share http://www.matronics.com/photoshare Other Email Lists http://www.matronics.com/emaillists Contributions http://www.matronics.com/contribution ------------------------------------------------------------------------------------- These Email List Services are sponsored solely by Matronics and through the generous Contributions of its members.