---------------------------------------------------------- Pietenpol-List Digest Archive --- Total Messages Posted Mon 01/29/18: 6 ---------------------------------------------------------- Today's Message Index: ---------------------- 1. 05:52 AM - Re: Re: Spay Latex on Aluminum (Michael Perez) 2. 06:11 AM - Re: Re: Spay Latex on Aluminum (Steven Dortch) 3. 07:26 AM - Re: Re: Spay Latex on Aluminum (Jim Boyer) 4. 07:50 AM - Re: Re: Spay Latex on Aluminum ((null) raykrause) 5. 07:50 AM - Re: Re: Spay Latex on Aluminum (Steven Dortch) 6. 08:44 AM - Stromberg Core on eBay (jarheadpilot82) ________________________________ Message 1 _____________________________________ Time: 05:52:14 AM PST US From: Michael Perez Subject: Re: Pietenpol-List: Re: Spay Latex on Aluminum Hello Rick. Yes, I remember your test piece on a post..hard to believe you still have it there! Latex not holding up well on aluminum and fuel is good to know; thanks!=C2 - On the aluminum parts covered with latex, did you top coat those areas with any type of clear? (polyurethane or ...?) ________________________________ Message 2 _____________________________________ Time: 06:11:06 AM PST US From: Steven Dortch Subject: Re: Pietenpol-List: Re: Spay Latex on Aluminum I would also think that latex on metal would not handle scuffing and such. If it is not in an area that sees much wear, latex seems fine. I my self mostly used rattlecan spray paint on metal using a self etching primer. On Mon, Jan 29, 2018 at 7:51 AM, Michael Perez wrote: > Hello Rick. Yes, I remember your test piece on a post..hard to believe you > still have it there! > > Latex not holding up well on aluminum and fuel is good to know; thanks! > On the aluminum parts covered with latex, did you top coat those areas with > any type of clear? (polyurethane or ...?) > > -- Blue Skies, Steve D ________________________________ Message 3 _____________________________________ Time: 07:26:19 AM PST US From: Jim Boyer Subject: Re: Pietenpol-List: Re: Spay Latex on Aluminum Steve where did you get the self etching primer and what brand. Thanks, Jim B. > On January 29, 2018 at 6:10 AM Steven Dortch wrote: > > I would also think that latex on metal would not handle scuffing and such. If it is not in an area that sees much wear, latex seems fine. > > I my self mostly used rattlecan spray paint on metal using a self etching primer. > > > > On Mon, Jan 29, 2018 at 7:51 AM, Michael Perez wrote: > > > > Hello Rick. Yes, I remember your test piece on a post..hard to believe you still have it there! > > Latex not holding up well on aluminum and fuel is good to know; thanks! On the aluminum parts covered with latex, did you top coat those areas with any type of clear? (polyurethane or ...?) > > > > > > > > -- > Blue Skies, > Steve D > ________________________________ Message 4 _____________________________________ Time: 07:50:16 AM PST US From: "(null) raykrause" Subject: Re: Pietenpol-List: Re: Spay Latex on Aluminum I used an industrial latex from Benjamin Moore that's seems to not be a problem with 100LL! I have tested it several times and the latex does not come off either the fabric or metal. The fuel just evaporates and the paint looks fine afterwards, still hard. BUT I have not rubbed it roughly after the fuel dried. Ray Krause SkyScout Sent from my iPad On Jan 29, 2018, at 5:51 AM, Michael Perez wrote: aluminum ________________________________ Message 5 _____________________________________ Time: 07:50:43 AM PST US From: Steven Dortch Subject: Re: Pietenpol-List: Re: Spay Latex on Aluminum Rust-Oleum, in the aviation section of Lowes. On Jan 29, 2018 9:28 AM, "Jim Boyer" wrote: > Steve where did you get the self etching primer and what brand. Thanks, > Jim B. > > > On January 29, 2018 at 6:10 AM Steven Dortch > wrote: > > I would also think that latex on metal would not handle scuffing and such. > If it is not in an area that sees much wear, latex seems fine. > > I my self mostly used rattlecan spray paint on metal using a self etching > primer. > > > On Mon, Jan 29, 2018 at 7:51 AM, Michael Perez > wrote: > > Hello Rick. Yes, I remember your test piece on a post..hard to believe you > still have it there! > Latex not holding up well on aluminum and fuel is good to know; thanks! > On the aluminum parts covered with latex, did you top coat those areas with > any type of clear? (polyurethane or ...?) > > > -- > Blue Skies, > Steve D > > ________________________________ Message 6 _____________________________________ Time: 08:44:10 AM PST US Subject: Pietenpol-List: Stromberg Core on eBay From: "jarheadpilot82" In case anyone is looking for a core, I saw this carburetor this morning on eBay - https://www.ebay.com/itm/Stromberg-NA-S3B-Carburetor-for-Piper-J3-Cub-Taylorcraft-Aeronca-380155-1/323033780564?epid=1073741993&hash=item4b36505154:g:2ZkAAOSwc-tY6Y7h&vxp=mtr It has been my experience on some of these long term Buy-It-Now auctions, that if I contact the seller directly and offer them a lower price, many times they will accept, go in and lower the Buy-It-Now price, then I purchase it. Just a thought. -------- Semper Fi, Terry Hand Athens, GA Read this topic online here: http://forums.matronics.com/viewtopic.php?p=477675#477675 ------------------------------------------------------------------------------------- Other Matronics Email List Services ------------------------------------------------------------------------------------- Post A New Message pietenpol-list@matronics.com UN/SUBSCRIBE http://www.matronics.com/subscription List FAQ http://www.matronics.com/FAQ/Pietenpol-List.htm Web Forum Interface To Lists http://forums.matronics.com Matronics List Wiki http://wiki.matronics.com Full Archive Search Engine http://www.matronics.com/search 7-Day List Browse http://www.matronics.com/browse/pietenpol-list Browse Digests http://www.matronics.com/digest/pietenpol-list Browse Other Lists http://www.matronics.com/browse Live Online Chat! http://www.matronics.com/chat Archive Downloading http://www.matronics.com/archives Photo Share http://www.matronics.com/photoshare Other Email Lists http://www.matronics.com/emaillists Contributions http://www.matronics.com/contribution ------------------------------------------------------------------------------------- These Email List Services are sponsored solely by Matronics and through the generous Contributions of its members.