---------------------------------------------------------- Pietenpol-List Digest Archive --- Total Messages Posted Tue 04/03/18: 7 ---------------------------------------------------------- Today's Message Index: ---------------------- 1. 03:23 PM - Re: Ragwing Ultra-Piet (cdlwingnut) 2. 03:37 PM - Re: Re: Ragwing Ultra-Piet (Brian Jardine) 3. 05:18 PM - Re: Ragwing Ultra-Piet (cdlwingnut) 4. 06:01 PM - Re: Re: Ragwing Ultra-Piet (cessna7226g@aol.com) 5. 06:19 PM - Re: Ragwing Ultra-Piet (cdlwingnut) 6. 07:28 PM - Re: Re: Ragwing Ultra-Piet (Ken Bickers) 7. 07:39 PM - Re: Ragwing Ultra-Piet (cdlwingnut) ________________________________ Message 1 _____________________________________ Time: 03:23:09 PM PST US Subject: Pietenpol-List: Re: Ragwing Ultra-Piet From: "cdlwingnut" Progress update. Metal fasteners are fabricated and did the seat belt attachments. Then the gear was removed so i can use a router on it to round off the edges. I also need to varnish it and the holes i drilled in the wood. I did some varnishing and made rudder peddles. The posts for the center section are cut out of fir. Read this topic online here: http://forums.matronics.com/viewtopic.php?p=479020#479020 Attachments: http://forums.matronics.com//files/20180329_171338_resized_866.jpg http://forums.matronics.com//files/20180403_152104_resized_187.jpg http://forums.matronics.com//files/20180329_171348_resized_475.jpg http://forums.matronics.com//files/20180329_171331_resized_148.jpg http://forums.matronics.com//files/20180327_124615_resized_985.jpg ________________________________ Message 2 _____________________________________ Time: 03:37:06 PM PST US From: Brian Jardine Subject: RE: Pietenpol-List: Re: Ragwing Ultra-Piet Nice progress. What glue are you using on your wood structure, hopefully its T-88 epoxy. Brian Meridian, ID -----Original Message----- From: owner-pietenpol-list-server@matronics.com [mailto:owner-pietenpol-list-server@matronics.com] On Behalf Of cdlwingnut Sent: Tuesday, April 03, 2018 4:23 PM Subject: Pietenpol-List: Re: Ragwing Ultra-Piet --> Progress update. Metal fasteners are fabricated and did the seat belt attachments. Then the gear was removed so i can use a router on it to round off the edges. I also need to varnish it and the holes i drilled in the wood. I did some varnishing and made rudder peddles. The posts for the center section are cut out of fir. Read this topic online here: http://forums.matronics.com/viewtopic.php?p=479020#479020 Attachments: http://forums.matronics.com//files/20180329_171338_resized_866.jpg http://forums.matronics.com//files/20180403_152104_resized_187.jpg http://forums.matronics.com//files/20180329_171348_resized_475.jpg http://forums.matronics.com//files/20180329_171331_resized_148.jpg http://forums.matronics.com//files/20180327_124615_resized_985.jpg ________________________________ Message 3 _____________________________________ Time: 05:18:22 PM PST US Subject: Pietenpol-List: Re: Ragwing Ultra-Piet From: "cdlwingnut" Yes im using T88 Read this topic online here: http://forums.matronics.com/viewtopic.php?p=479024#479024 ________________________________ Message 4 _____________________________________ Time: 06:01:53 PM PST US From: cessna7226g@aol.com Subject: Re: Pietenpol-List: Re: Ragwing Ultra-Piet The bottom of your gear isn't at the right angle. Making the gear leg is the hardest part of the project -----Original Message----- From: cdlwingnut Sent: Tue, Apr 3, 2018 8:18 pm Subject: Pietenpol-List: Re: Ragwing Ultra-Piet Yes im using T88 Read this topic online here: http://forums.matronics.com/viewtopic.php?p=479024#479024 ________________________________ Message 5 _____________________________________ Time: 06:19:25 PM PST US Subject: Pietenpol-List: Re: Ragwing Ultra-Piet From: "cdlwingnut" What do you mean Cessna. The gear leg has no right angles and it goes out from the fuselage at a 37 deg angle Read this topic online here: http://forums.matronics.com/viewtopic.php?p=479026#479026 ________________________________ Message 6 _____________________________________ Time: 07:28:17 PM PST US From: Ken Bickers Subject: Re: Pietenpol-List: Re: Ragwing Ultra-Piet Chad, I suspect that what Cessna is referring to is the orientation of the short block that will be parallel to the ground during landings. The angle at which it is currently set is not flat relative to the axle. Take a look at that piece from the Jenny-style gear that I originally had on my Piet. Ken On Tue, Apr 3, 2018 at 7:19 PM, cdlwingnut wrote: > > What do you mean Cessna. The gear leg has no right angles and it goes out > from the fuselage at a 37 deg angle > > > Read this topic online here: > > http://forums.matronics.com/viewtopic.php?p=479026#479026 > > ________________________________ Message 7 _____________________________________ Time: 07:39:38 PM PST US Subject: Pietenpol-List: Re: Ragwing Ultra-Piet From: "cdlwingnut" I see what you mean now Read this topic online here: http://forums.matronics.com/viewtopic.php?p=479028#479028 ------------------------------------------------------------------------------------- Other Matronics Email List Services ------------------------------------------------------------------------------------- Post A New Message pietenpol-list@matronics.com UN/SUBSCRIBE http://www.matronics.com/subscription List FAQ http://www.matronics.com/FAQ/Pietenpol-List.htm Web Forum Interface To Lists http://forums.matronics.com Matronics List Wiki http://wiki.matronics.com Full Archive Search Engine http://www.matronics.com/search 7-Day List Browse http://www.matronics.com/browse/pietenpol-list Browse Digests http://www.matronics.com/digest/pietenpol-list Browse Other Lists http://www.matronics.com/browse Live Online Chat! http://www.matronics.com/chat Archive Downloading http://www.matronics.com/archives Photo Share http://www.matronics.com/photoshare Other Email Lists http://www.matronics.com/emaillists Contributions http://www.matronics.com/contribution ------------------------------------------------------------------------------------- These Email List Services are sponsored solely by Matronics and through the generous Contributions of its members.