---------------------------------------------------------- Pietenpol-List Digest Archive --- Total Messages Posted Wed 06/13/18: 9 ---------------------------------------------------------- Today's Message Index: ---------------------- 1. 12:39 PM - New member (Bruce Clemens) 2. 01:04 PM - Re: New member ((null) raykrause) 3. 01:20 PM - Re: New member (Bruce Clemens) 4. 01:26 PM - Re: New member (Boatright, Jeffrey) 5. 02:20 PM - Re: New member (Bruce Clemens) 6. 03:16 PM - Re: New member (Jim Boyer) 7. 03:19 PM - Re: New member (Glen Schweizer) 8. 04:20 PM - Re: New member (Bruce Clemens) 9. 07:18 PM - Re: New member (jarheadpilot82) ________________________________ Message 1 _____________________________________ Time: 12:39:52 PM PST US From: Bruce Clemens Subject: Pietenpol-List: New member Hello,I just joined this list.I am recently retired and my wife will soon be.We rcently bought a little home and hangar at Hacienda Sur Luna Airpark in deep southern New Mexico. We love it there.Not yet there full time but in a year or so we will sell our home in Missouri and move out.I don't have a plane and have been considering what I would like to fly around when we get out there. It's class G airspace.I got my license in a J-3 a long time ago and most of my flying time is in taildraggers. I just can't bring myself to buy a Cessna 150 or something like that cheap just to get in the air. But good taildraggers seem to command a premium that I can't easily afford.I think that for tooling around on a beautiful desert morning, an Air Camper would be perfect.No radio, no hassles, just pure early 20th century flying.I think I can build all of it and will try to begin with the engine.Corvair?Any counter opinions?I am ready to learn.Best,Bruce ________________________________ Message 2 _____________________________________ Time: 01:04:49 PM PST US Subject: Re: Pietenpol-List: New member From: "(null) raykrause" Bruce, Welcome to the list. I just finished the Skyscout. You should also be on the Facebook Pietenpol forum. That=99s where most of the information resi des. Good look, enjoy, Ray Krause Sent from my iPad On Jun 13, 2018, at 12:39 PM, Bruce Clemens wrot e: Hello, I just joined this list. I am recently retired and my wife will soon be. We rcently bought a little home and hangar at Hacienda Sur Luna Airpark in d eep southern New Mexico. We love it there. Not yet there full time but in a year or so we will sell our home in Missour i and move out. I don't have a plane and have been considering what I would like to fly arou nd when we get out there. It's class G airspace. I got my license in a J-3 a long time ago and most of my flying time is in t aildraggers. I just can't bring myself to buy a Cessna 150 or something like that cheap just to get in the air. But good taildraggers seem to command a p remium that I can't easily afford. I think that for tooling around on a beautiful desert morning, an Air Camper would be perfect. No radio, no hassles, just pure early 20th century flying. I think I can build all of it and will try to begin with the engine. Corvair? Any counter opinions? I am ready to learn. Best, Bruce ========================== ========================== ========================== ========================== ========================== ========================== ========================== ========================== ================ ________________________________ Message 3 _____________________________________ Time: 01:20:47 PM PST US From: Bruce Clemens Subject: Re: Pietenpol-List: New member Thank you, Ray. Yes, I have just sent my request to join. Congrats on just finishing the Skyscout! Have you flown it yet?Was it your first build?I app reciate your welcome.Best,Bruce From: raykrause To: pietenpol-list@matronics.com Sent: Wednesday, June 13, 2018 3:08 PM Subject: Re: Pietenpol-List: New member Bruce,Welcome to the list. I just finished the Skyscout. You should also be on the Facebook Pietenpol forum. That=99s where most of the informat ion resides.Good look, enjoy,Ray Krause Sent from my iPad On Jun 13, 2018, at 12:39 PM, Bruce Clemens wro te: Hello,I just joined this list.I am recently retired and my wife will soon b e.We rcently bought a little home and hangar at Hacienda Sur Luna Airpark i n deep southern New Mexico. We love it there.Not yet there full time but in a year or so we will sell our home in Missouri and move out.I don't have a plane and have been considering what I would like to fly around when we ge t out there. It's class G airspace.I got my license in a J-3 a long time ag o and most of my flying time is in taildraggers. I just can't bring myself to buy a Cessna 150 or something like that cheap just to get in the air. Bu t good taildraggers seem to command a premium that I can't easily afford.I think that for tooling around on a beautiful desert morning, an Air Camper would be perfect.No radio, no hassles, just pure early 20th century flying. I think I can build all of it and will try to begin with the engine.Corvair ?Any counter opinions?I am ready to learn.Best,Bruce======= ===>http://www.matronics.com/Navigator?Pietenpol-List===== =====cs.com================== =================om======= ===matronics.com/contribution============= ===================== ________________________________ Message 4 _____________________________________ Time: 01:26:24 PM PST US From: "Boatright, Jeffrey" Subject: Re: Pietenpol-List: New member SGkgQnJ1Y2UsDQoNCldlbGNvbWUhIFRoZSBQaWV0IGNlcnRhaW5seSB3aWxsIGJlIGdyZWF0IGZv ciB0b29saW5nIGFyb3VuZCBvbiBhIGJlYXV0aWZ1bCBkZXNlcnQgbW9ybmluZy4gQXMgdG8gaG93 IHRvIGdldCB0aGVyZSwgYSBsb3QgZGVwZW5kcyBvbiB5b3VyIGdvYWxzLiBEbyB5b3Ugd2FudCB0 byBmbHkgcmlnaHQgbm93LCBidWlsZCwgb3IgYm90aD8gIEluIHJldGlyZW1lbnQsIHlvdSBtYXkg aGF2ZSB0aGUgdGltZSB0byBmbHkgaW4gdGhlIG1vcm5pbmdzIGFuZCBldmVuaW5ncyBhbmQgYnVp bGQgZHVyaW5nIHRoZSBoZWF0IG9mIHRoZSBkYXkuIE9yIHRha2UgYSBuYXAgKG15IHNwZWVkKS4g R2l2ZW4gd2hhdCBJIHNlZSBvbiBCYXJuc3Rvcm1lcnMgdGhlc2UgZGF5cywgeW91IG1heSBmaW5k IHRoYXQgeW91IGNhbiBhZmZvcmQgc29tZXRoaW5nIHRvIGZseSByaWdodCBub3cgd2hpbGUgeW91 IGJ1aWxkIGEg4oCcZHJlYW0gbWFjaGluZS7igJ0gTG90cyBvZiBzb2x1dGlvbnMgZm9yIGJvdGgg YWlyZnJhbWUgYW5kIGVuZ2luZS4NCg0KVGhlcmUgYXJlIGNlcnRhaW5seSBtYW55IENvcnZhaXIt cG93ZXJlZCBQaWV0cy4gVGhleSBmbHkgd2VsbCBhbmQgYXJlIHNtb290aCEgSSBzdGFydGVkIGRv d24gdGhlIENvcnZhaXIgcm91dGUsIGJ1dCBlbmRlZCB1cCBidXlpbmcgYSBmbHlpbmcgUGlldCB3 aXRoIGEgQ29udGluZW50YWwgc28gdGhhdCBJIGNvdWxkIGdldCBpbnRvIHRoZSBhaXIgcXVpY2tl ci4gSSBndWVzcyB0aGF04oCZcyBhbm90aGVyIGNvbnNpZGVyYXRpb24uIEnigJl2ZSBiZWVuIGlu IGFuIEVBQSBjaGFwdGVyIHNpbmNlIHRoZSBtaWQtODBzLiBCYWNrIHRoZW4gSSB3YXMgdGhlIHlv dW5nZXN0IG1lbWJlci4gRXZlcnlib2R5IHRhbGtlZCBhYm91dCBidWlsZGluZyBhbmQgZmx5aW5n LCBhbmQgc29tZSBkaWQuIEJ1dCBhbiBhd2Z1bCBsb3Qgb2YgcGVvcGxlIG5ldmVyIGdvdCBhcm91 bmQgdG8gZmluaXNoaW5nIHRoZWlyIHByb2plY3RzIGFuZCBuZXZlciBnb3QgbXVjaCBmbHlpbmcg aW4uIEEgbG90IG9mIHRob3NlIGd1eXMgYXJlIGdvbmUgbm93LiBOb3QgdGhhdCB5b3XigJlyZSBh c2tpbmcgZm9yIGxpZmUgYWR2aWNlLCBidXQgbm9uZSBvZiB1cyBrbm93IGhvdyBsb25nIHdlIGhh dmUuIFdpbGxpYW0gV3lubmUsIHRoZSBDb3J2YWlyIEF1dGhvcml0eSwgdXNlZCB0byBzYXkgdGhh dCB3ZeKAmXJlIGFsbCBqdXN0IG9uZSBtZWRpY2FsIGF3YXkgZnJvbSBiZWluZyBncm91bmRlZC4g VGhhdOKAmXMgc29tZXdoYXQgbGVzcyB0cnVlIG5vdyB3aXRoIFNwb3J0IFBpbG90IGFuZCBuZXcg bWVkaWNhbCBjZXJ0aWZpY2F0aW9uIHJ1bGVzLCBidXQgaW4gZ2VuZXJhbCwgaXTigJlzIHRydWUg dGhhdCB3ZSBuZXZlciBrbm93IGhvdyBsb25nIHdlIGhhdmUuIE9kZGx5IGVub3VnaCwgaXQgd2Fz IGhpcyDigJxvbmUgbWVkaWNhbCBhd2F5IGZyb20gYmVpbmcgZ3JvdW5kZWTigJ0gc3RhdGVtZW50 IGhlIG1hZGUgYXQgb3VyIENoYXB0ZXIgbW9udGhseSBtZWV0aW5nIHRoYXQgc3B1cnJlZCBteSBk ZWNpc2lvbiB0byBzZWxsIG15IENvcnZhaXIgcHJvamVjdCBhbmQgYnV5IGEgZmx5aW5nIFBpZXRl bnBvbC4gSeKAmW0gZ2xhZCBJIGRpZCBhcyBJIGdvdCBhIGxvdCBvZiBob3VycyBpbiB0aGUgYWly IHRoYXQgSeKAmWQgaGF2ZSBuZXZlciBmbG93biBpZiBJIHdhcyBzdGlsbCB0aW5rZXJpbmcgYXJv dW5kIG9uIHRoYXQgZW5naW5lLiBJdCBsZWQgZGlyZWN0bHkgdG8gbXkgYnV5aW5nIGEgUGl0dHMg d2hlbiB0aGUgb3Bwb3J0dW5pdHkgY2FtZSBhbG9uZywgYWdhaW4gYmFzZWQgb24gdGhlIG1hbnRy YSBvZiB5b3UgbmV2ZXIga25vdyBob3cgbG9uZyB5b3UgaGF2ZSBsZWZ0Lg0KDQpIb3BlIHRvIHNl ZSB5b3UgZmx5aW5nIHNvbWVkYXkgc29vbiENCg0KSmVmZg0KDQotLQ0KDQpKZWZmcmV5IEguIEJv YXRyaWdodCwgUGhELCBGQVJWTw0KUHJvZmVzc29yIG9mIE9waHRoYWxtb2xvZ3kNCkVtb3J5IFVu aXZlcnNpdHkgU2Nob29sIG9mIE1lZGljaW5lDQpDb3JlIERpcmVjdG9yICYgUmVzZWFyY2ggQmlv bG9naXN0DQpBdGxhbnRhIFZBTUMgQ2VudGVyIGZvciBWaXN1YWwgJiBOZXVyb2NvZ25pdGl2ZSBS ZWhhYmlsaXRhdGlvbg0KDQoNCkZyb206IDxvd25lci1waWV0ZW5wb2wtbGlzdC1zZXJ2ZXJAbWF0 cm9uaWNzLmNvbT4gb24gYmVoYWxmIG9mIEJydWNlIENsZW1lbnMgPGNsZW1lbnNmYW0zQHNiY2ds b2JhbC5uZXQ+DQpSZXBseS1UbzogInBpZXRlbnBvbC1saXN0QG1hdHJvbmljcy5jb20iIDxwaWV0 ZW5wb2wtbGlzdEBtYXRyb25pY3MuY29tPg0KRGF0ZTogV2VkbmVzZGF5LCBKdW5lIDEzLCAyMDE4 IGF0IDM6NDEgUE0NClRvOiAicGlldGVucG9sLWxpc3RAbWF0cm9uaWNzLmNvbSIgPHBpZXRlbnBv bC1saXN0QG1hdHJvbmljcy5jb20+DQpTdWJqZWN0OiBQaWV0ZW5wb2wtTGlzdDogTmV3IG1lbWJl cg0KDQpIZWxsbywNCkkganVzdCBqb2luZWQgdGhpcyBsaXN0Lg0KSSBhbSByZWNlbnRseSByZXRp cmVkIGFuZCBteSB3aWZlIHdpbGwgc29vbiBiZS4NCldlIHJjZW50bHkgYm91Z2h0IGEgbGl0dGxl IGhvbWUgYW5kIGhhbmdhciBhdCBIYWNpZW5kYSBTdXIgTHVuYSBBaXJwYXJrIGluIGRlZXAgc291 dGhlcm4gTmV3IE1leGljby4gV2UgbG92ZSBpdCB0aGVyZS4NCk5vdCB5ZXQgdGhlcmUgZnVsbCB0 aW1lIGJ1dCBpbiBhIHllYXIgb3Igc28gd2Ugd2lsbCBzZWxsIG91ciBob21lIGluIE1pc3NvdXJp IGFuZCBtb3ZlIG91dC4NCkkgZG9uJ3QgaGF2ZSBhIHBsYW5lIGFuZCBoYXZlIGJlZW4gY29uc2lk ZXJpbmcgd2hhdCBJIHdvdWxkIGxpa2UgdG8gZmx5IGFyb3VuZCB3aGVuIHdlIGdldCBvdXQgdGhl cmUuIEl0J3MgY2xhc3MgRyBhaXJzcGFjZS4NCkkgZ290IG15IGxpY2Vuc2UgaW4gYSBKLTMgYSBs b25nIHRpbWUgYWdvIGFuZCBtb3N0IG9mIG15IGZseWluZyB0aW1lIGlzIGluIHRhaWxkcmFnZ2Vy cy4gSSBqdXN0IGNhbid0IGJyaW5nIG15c2VsZiB0byBidXkgYSBDZXNzbmEgMTUwIG9yIHNvbWV0 aGluZyBsaWtlIHRoYXQgY2hlYXAganVzdCB0byBnZXQgaW4gdGhlIGFpci4gQnV0IGdvb2QgdGFp bGRyYWdnZXJzIHNlZW0gdG8gY29tbWFuZCBhIHByZW1pdW0gdGhhdCBJIGNhbid0IGVhc2lseSBh ZmZvcmQuDQpJIHRoaW5rIHRoYXQgZm9yIHRvb2xpbmcgYXJvdW5kIG9uIGEgYmVhdXRpZnVsIGRl c2VydCBtb3JuaW5nLCBhbiBBaXIgQ2FtcGVyIHdvdWxkIGJlIHBlcmZlY3QuDQpObyByYWRpbywg bm8gaGFzc2xlcywganVzdCBwdXJlIGVhcmx5IDIwdGggY2VudHVyeSBmbHlpbmcuDQpJIHRoaW5r IEkgY2FuIGJ1aWxkIGFsbCBvZiBpdCBhbmQgd2lsbCB0cnkgdG8gYmVnaW4gd2l0aCB0aGUgZW5n aW5lLg0KQ29ydmFpcj8NCkFueSBjb3VudGVyIG9waW5pb25zPw0KSSBhbSByZWFkeSB0byBsZWFy bi4NCkJlc3QsDQpCcnVjZQ0KDQpfX19fX19fX19fX19fX19fX19fX19fX19fX19fX19fXw0KDQpU aGlzIGUtbWFpbCBtZXNzYWdlIChpbmNsdWRpbmcgYW55IGF0dGFjaG1lbnRzKSBpcyBmb3IgdGhl IHNvbGUgdXNlIG9mDQp0aGUgaW50ZW5kZWQgcmVjaXBpZW50KHMpIGFuZCBtYXkgY29udGFpbiBj b25maWRlbnRpYWwgYW5kIHByaXZpbGVnZWQNCmluZm9ybWF0aW9uLiBJZiB0aGUgcmVhZGVyIG9m IHRoaXMgbWVzc2FnZSBpcyBub3QgdGhlIGludGVuZGVkDQpyZWNpcGllbnQsIHlvdSBhcmUgaGVy ZWJ5IG5vdGlmaWVkIHRoYXQgYW55IGRpc3NlbWluYXRpb24sIGRpc3RyaWJ1dGlvbg0Kb3IgY29w eWluZyBvZiB0aGlzIG1lc3NhZ2UgKGluY2x1ZGluZyBhbnkgYXR0YWNobWVudHMpIGlzIHN0cmlj dGx5DQpwcm9oaWJpdGVkLg0KDQpJZiB5b3UgaGF2ZSByZWNlaXZlZCB0aGlzIG1lc3NhZ2UgaW4g ZXJyb3IsIHBsZWFzZSBjb250YWN0DQp0aGUgc2VuZGVyIGJ5IHJlcGx5IGUtbWFpbCBtZXNzYWdl IGFuZCBkZXN0cm95IGFsbCBjb3BpZXMgb2YgdGhlDQpvcmlnaW5hbCBtZXNzYWdlIChpbmNsdWRp bmcgYXR0YWNobWVudHMpLg0K ________________________________ Message 5 _____________________________________ Time: 02:20:19 PM PST US From: Bruce Clemens Subject: Re: Pietenpol-List: New member Jeff, thank you for your thoughtful welcome.Take a nap! Yes, my speed too!! !=C2-Your main question as to whether I want to fly right now or later wo uld be answered by yes! LOLBut no, I am ready to wait. My dear wife is a ce ramics artist and teaches at out local Community College and when she retir es she will need a portion of the hangar for her clay stuff. I will make su re that that happens before I worry about my going aloft. But meanwhile I c an still do my homework! :)So I think my approach will be to figure out how to nail down an engine, and then work on an airframe.=C2- I very much appreciate your point about all of us being one medical away fr om grounded. I take that point strongly for the reason that Cathy (my wife) and I were involved in a bad traffic accident just three weeks ago where a man t-boned our Subaru after running a stop sign at 40 MPH. We were rolled and slid upside down 100 feet before stopping. It was at 7:00 AM on Glenst one Ave in Springfield on a weekday. We are thankful that it wasn't 8:00 AM because we were in the oncoming lanes when we stopped. Had there been more traffic it probably would have come out much worse.In any case we were abl e to walk away and are OK. So I've been thinking a lot recently about my mortality. But we have many f riends at our happy place in NM who fly and will take me whenever I want. S o I am OK with waiting and dreaming of creating the best plane for Cathy an d me into our retirement. I very much look forward to learning and sharing with you and others on thi s list as I go forward with this dream. Thank you for the advice. I will al ways welcome more.Best,Bruce From: "Boatright, Jeffrey" To: Bruce Clemens Sent: Wednesday, June 13, 2018 3:39 PM Subject: Re: Pietenpol-List: New member #yiv6380344625 #yiv6380344625 -- _filtered #yiv6380344625 {panose-1:2 4 5 3 5 4 6 3 2 4;} _filtered #yiv6380344625 {font-family:Calibri;panose-1:2 15 5 2 2 2 4 3 2 4;} _filtered #yiv6380344625 {panose-1:2 0 5 3 0 0 0 2 0 4;}# yiv6380344625 #yiv6380344625 p.yiv6380344625MsoNormal, #yiv6380344625 li.yi v6380344625MsoNormal, #yiv6380344625 div.yiv6380344625MsoNormal {margin:0in ;margin-bottom:.0001pt;font-size:11.0pt;font-family:sans-serif;}#yiv6380344 625 a:link, #yiv6380344625 span.yiv6380344625MsoHyperlink {color:#0563C1;te xt-decoration:underline;}#yiv6380344625 a:visited, #yiv6380344625 span.yiv6 380344625MsoHyperlinkFollowed {color:#954F72;text-decoration:underline;}#yi v6380344625 p.yiv6380344625msonormal0, #yiv6380344625 li.yiv6380344625msono rmal0, #yiv6380344625 div.yiv6380344625msonormal0 {margin-right:0in;margin- left:0in;font-size:11.0pt;font-family:sans-serif;}#yiv6380344625 span.yiv63 80344625EmailStyle18 {font-family:sans-serif;color:windowtext;font-weight:n ormal;font-style:normal;}#yiv6380344625 span.yiv6380344625apple-converted-s pace {}#yiv6380344625 .yiv6380344625MsoChpDefault {font-size:10.0pt;} _filt ered #yiv6380344625 {margin:1.0in 1.0in 1.0in 1.0in;}#yiv6380344625 div.yiv 6380344625WordSection1 {}#yiv6380344625 Hi Bruce, =C2- Welcome! The Piet certainly will be great for tooling around on a beautiful desert morning. A s to how to get there, a lot depends on your goals. Do you want to fly righ t now, build, or both? =C2-In retirement, you may have the time to fly in the mornings and evenings and build during the heat of the day. Or take a nap (my speed). Given what I see on Barnstormers these days, you may find t hat you can afford something to fly right now while you build a =9Cdr eam machine.=9D Lots of solutions for both airframe and engine.=C2- =C2- There are certainly many Corvair-powered Piets. They fly well and a re smooth! I started down the Corvair route, but ended up buying a flying P iet with a Continental so that I could get into the air quicker. I guess th at=99s another consideration. I=99ve been in an EAA chapter sin ce the mid-80s. Back then I was the youngest member. Everybody talked about building and flying, and some did. But an awful lot of people never got ar ound to finishing their projects and never got much flying in. A lot of tho se guys are gone now. Not that you=99re asking for life advice, but n one of us know how long we have. William Wynne, the Corvair Authority, used to say that we=99re all just one medical away from being grounded. T hat=99s somewhat less true now with Sport Pilot and new medical certi fication rules, but in general, it=99s true that we never know how lo ng we have. Oddly enough, it was his =9Cone medical away from being g rounded=9D statement he made at our Chapter monthly meeting that spur red my decision to sell my Corvair project and buy a flying Pietenpol. I =99m glad I did as I got a lot of hours in the air that I=99d have never flown if I was still tinkering around on that engine. It led directl y to my buying a Pitts when the opportunity came along, again based on the mantra of you never know how long you have left. =C2- Hope to see you fly ing someday soon! =C2- Jeff =C2- =C2- =C2- --=C2- =C2- Jeffr ey H. Boatright, PhD, FARVO Professor of Ophthalmology Emory University Sch ool of Medicine Core Director & Research Biologist Atlanta VAMC Center for Visual & Neurocognitive Rehabilitation =C2- =C2- From: on behalf of Bruce Clemens Subject: Pietenpol-List: New member =C2- Hello, I just joined this list. I am recently retired and my wife will soon be. We rcently bought a little home and hangar at Hacienda Sur Luna Airpark in deep southern New Mexico. We love it there. Not yet there full time but in a year or so we will sell our home in Missouri and move out. I don't have a plane and have been consi dering what I would like to fly around when we get out there. It's class G airspace. I got my license in a J-3 a long time ago and most of my flying t ime is in taildraggers. I just can't bring myself to buy a Cessna 150 or so mething like that cheap just to get in the air. But good taildraggers seem to command a premium that I can't easily afford. I think that for tooling a round on a beautiful desert morning, an Air Camper would be perfect. No rad io, no hassles, just pure early 20th century flying. I think I can build al l of it and will try to begin with the engine. Corvair? Any counter opinion s? I am ready to learn. Best, Bruce This e-mail message (including any attachments) is for the sole use of the intended recipient(s) and may contain confidential and privileged information. If the reader of this message is not the intended recipient, you are hereby notified that any dissemination, distribution or copying of this message (including any attachments) is strictly prohibited. If you have received this message in error, please contact the sender by reply e-mail message and destroy all copies of the original message (including attachments). ________________________________ Message 6 _____________________________________ Time: 03:16:29 PM PST US From: Jim Boyer Subject: Re: Pietenpol-List: New member Certified airplanes will cost much in terms of annual inspections and just general maintenance. My 172 cost me $6700 in annuals and relatively minor changes; ie. generator to alternator in the last three years. Here in CA hangar rents are high, gas 100LL is high and maintenance rates are high. I would never go certified again, experimental is the way to go, as you can get repairmans certificate for the airplane you have built. My biases! Jim > On June 13, 2018 at 12:39 PM Bruce Clemens wrote: > > Hello,I just joined this list.I am recently retired and my wife will soon be. > We rcently bought a little home and hangar at Hacienda Sur Luna Airpark in deep southern New Mexico. We love it there. > Not yet there full time but in a year or so we will sell our home in Missouri and move out. > I don't have a plane and have been considering what I would like to fly around when we get out there. It's class G airspace. > I got my license in a J-3 a long time ago and most of my flying time is in taildraggers. I just can't bring myself to buy a Cessna 150 or something like that cheap just to get in the air. But good taildraggers seem to command a premium that I can't easily afford. > I think that for tooling around on a beautiful desert morning, an Air Camper would be perfect. > No radio, no hassles, just pure early 20th century flying. > I think I can build all of it and will try to begin with the engine. > Corvair? > Any counter opinions? > I am ready to learn. > Best, > Bruce > ________________________________ Message 7 _____________________________________ Time: 03:19:25 PM PST US Subject: Re: Pietenpol-List: New member From: Glen Schweizer Welcome aboard Bruce I would like to address two of the issues that you brought up the first one b eing the Corvair engine. Although there are many of them flying and Mr. Will iam win has done an awful lot of research, There does seem to be some reliab ility issues whether this is using worn out parts that have not been properl y rebuilt or improper building technique who=99s to say the other issu e I have with corvairs is the cost involved in building one correctly. For t he seven to $10,000 that you=99re going to have in the building one yo u can get a nice Mid time firewall forward O 200 Continental. The next issue I=99d like to deal with would be glue or nail or both r egarding rib to spar connections I have the good fortune of my job being to k eep 80-year-old bi planes flying=F0=9F=98=83 part of my job is building wing s for these old girls fabric covering and paint. We always do both. If you b y chance have the misfortune of an upset that causes rib damage, chances are that you will strip the wing of its covering for a thorough inspection of t he wing. If one or more ribs need to be replaced you can build them in three sections one section being between spar and the leading edge One between sp ars And one between the Spar and trailing edge. One of the beautiful things about experimental aviation is that there are al ways more than just one way to do something again welcome aboard get to cutt in an gluin!! > On Jun 13, 2018, at 2:07 PM, Bruce Clemens wro te: > > Jeff, thank you for your thoughtful welcome. > Take a nap! Yes, my speed too!!! > > Your main question as to whether I want to fly right now or later would be answered by yes! LOL > But no, I am ready to wait. My dear wife is a ceramics artist and teaches a t out local Community College and when she retires she will need a portion o f the hangar for her clay stuff. I will make sure that that happens before I worry about my going aloft. But meanwhile I can still do my homework! :) > So I think my approach will be to figure out how to nail down an engine, a nd then work on an airframe. > > I very much appreciate your point about all of us being one medical away f rom grounded. I take that point strongly for the reason that Cathy (my wife) and I were involved in a bad traffic accident just three weeks ago where a m an t-boned our Subaru after running a stop sign at 40 MPH. We were rolled an d slid upside down 100 feet before stopping. It was at 7:00 AM on Glenstone A ve in Springfield on a weekday. We are thankful that it wasn't 8:00 AM becau se we were in the oncoming lanes when we stopped. Had there been more traffi c it probably would have come out much worse. > In any case we were able to walk away and are OK. > > So I've been thinking a lot recently about my mortality. But we have many f riends at our happy place in NM who fly and will take me whenever I want. So I am OK with waiting and dreaming of creating the best plane for Cathy and m e into our retirement. > > I very much look forward to learning and sharing with you and others on th is list as I go forward with this dream. Thank you for the advice. I will al ways welcome more. > Best, > Bruce > > > > From: "Boatright, Jeffrey" > To: Bruce Clemens > Sent: Wednesday, June 13, 2018 3:39 PM > Subject: Re: Pietenpol-List: New member > > Hi Bruce, > > Welcome! The Piet certainly will be great for tooling around on a beautifu l desert morning. As to how to get there, a lot depends on your goals. Do yo u want to fly right now, build, or both? In retirement, you may have the ti me to fly in the mornings and evenings and build during the heat of the day. Or take a nap (my speed). Given what I see on Barnstormers these days, you m ay find that you can afford something to fly right now while you build a =9Cdream machine.=9D Lots of solutions for both airframe and engine . > > There are certainly many Corvair-powered Piets. They fly well and are smoo th! I started down the Corvair route, but ended up buying a flying Piet with a Continental so that I could get into the air quicker. I guess that=99 s another consideration. I=99ve been in an EAA chapter since the mid-8 0s. Back then I was the youngest member. Everybody talked about building and flying, and some did. But an awful lot of people never got around to finish ing their projects and never got much flying in. A lot of those guys are gon e now. Not that you=99re asking for life advice, but none of us know h ow long we have. William Wynne, the Corvair Authority, used to say that we =99re all just one medical away from being grounded. That=99s somew hat less true now with Sport Pilot and new medical certification rules, but i n general, it=99s true that we never know how long we have. Oddly enou gh, it was his =9Cone medical away from being grounded=9D statem ent he made at our Chapter monthly meeting that spurred my decision to sell m y Corvair project and buy a flying Pietenpol. I=99m glad I did as I go t a lot of hours in the air that I=99d have never flown if I was still tinkering around on that engine. It led directly to my buying a Pitts when t he opportunity came along, again based on the mantra of you never know how l ong you have left. > > Hope to see you flying someday soon! > > Jeff > > > > -- > > Jeffrey H. Boatright, PhD, FARVO > Professor of Ophthalmology > Emory University School of Medicine > Core Director & Research Biologist > Atlanta VAMC Center for Visual & Neurocognitive Rehabilitation > > > From: on behalf of Bruce Cleme ns > Date: Wednesday, June 13, 2018 at 3:41 PM > To: "pietenpol-list@matronics.com" > Subject: Pietenpol-List: New member > > Hello, > I just joined this list. > I am recently retired and my wife will soon be. > We rcently bought a little home and hangar at Hacienda Sur Luna Airpark in deep southern New Mexico. We love it there. > Not yet there full time but in a year or so we will sell our home in Misso uri and move out. > I don't have a plane and have been considering what I would like to fly ar ound when we get out there. It's class G airspace. > I got my license in a J-3 a long time ago and most of my flying time is in taildraggers. I just can't bring myself to buy a Cessna 150 or something li ke that cheap just to get in the air. But good taildraggers seem to command a premium that I can't easily afford. > I think that for tooling around on a beautiful desert morning, an Air Camp er would be perfect. > No radio, no hassles, just pure early 20th century flying. > I think I can build all of it and will try to begin with the engine. > Corvair? > Any counter opinions? > I am ready to learn. > Best, > Bruce > > > This e-mail message (including any attachments) is for the sole use of > the intended recipient(s) and may contain confidential and privileged > information. If the reader of this message is not the intended > recipient, you are hereby notified that any dissemination, distribution > or copying of this message (including any attachments) is strictly > prohibited. > > If you have received this message in error, please contact > the sender by reply e-mail message and destroy all copies of the > original message (including attachments). > > ________________________________ Message 8 _____________________________________ Time: 04:20:59 PM PST US From: Bruce Clemens Subject: Re: Pietenpol-List: New member Jim,=C2-yes, thanks. So glad I'm no longer in CA. And yes, mine will be E xperimental. Best wishes for your continued flying in the State of Californ ia. Or for anything else you wish to do there under Gov. Brown. From: Jim Boyer To: pietenpol-list@matronics.com Sent: Wednesday, June 13, 2018 5:20 PM Subject: Re: Pietenpol-List: New member Certified airplanes will cost much in terms of annual inspections and just general maintenance. My 172 cost me $6700 in annuals and relatively minor changes; ie. generator to alternator in the last three years. Here in CA ha ngar rents are high, gas 100LL is high and maintenance rates are high. I wo uld never go certified again, experimental is the way to go, as you can get repairmans certificate for the airplane you have built. My biases! Jim On June 13, 2018 at 12:39 PM Bruce Clemens wrot e: Hello,I just joined this list.I am recently retired and my wife will soon b e.We rcently bought a little home and hangar at Hacienda Sur Luna Airpark i n deep southern New Mexico. We love it there.Not yet there full time but in a year or so we will sell our home in Missouri and move out.I don't have a plane and have been considering what I would like to fly around when we ge t out there. It's class G airspace.I got my license in a J-3 a long time ag o and most of my flying time is in taildraggers. I just can't bring myself to buy a Cessna 150 or something like that cheap just to get in the air. Bu t good taildraggers seem to command a premium that I can't easily afford.I think that for tooling around on a beautiful desert morning, an Air Camper would be perfect.No radio, no hassles, just pure early 20th century flying. I think I can build all of it and will try to begin with the engine.Corvair ?Any counter opinions?I am ready to learn.Best,Bruce =C2- ________________________________ Message 9 _____________________________________ Time: 07:18:12 PM PST US Subject: Pietenpol-List: Re: New member From: "jarheadpilot82" Bruce, First of all. welcome to the Forum. This is a good spot to go to for information and assistance in your build. I wish you the best as you embark on this journey. I would be remiss if I did not take the time to respond to Glen's comments about Corvair engines and their value as an option for your choice of powerplant. I think that Glen is doing you a disservice in giving his opinion on Corvairs. Bernard Pietenpol, the designer of this wonderful airplane, used many different engines in the various Air Campers that he built over five decades. What was the last engine that he chose to use? Yes, Bruce, you guessed correctly - a Corvair. When you go to Brodhead (and I encourage you to do so), take a look at what powers "The Last Original", Bernard Pietenpol's last Air Camper that he built. A Corvair. I find it interesting that some builders love the man and revere his choices in the aircraft design but gloss over his choice of powerplant. Bruce makes reliability a reason for not using a Corvair. I would suggest that instead of accepting an online opinion from some one you have not met, who may or may not have any experience with the Corvair engine, that you contact Dan Weseman, the designer of the Panther, a great kit aircraft (https://flywithspa.com/). The Panther design is very successful, fast, aerobatic, and a great airplane. Of all the engines that he could have chosen, what was the initial engine that Dan chose for the rollout of the Panther? Yes, Bruce, a Corvair. If the Corvair engine has such a problem with reliability, why would Dan choose such an engine? Glen also makes the cost of the engine to be another reason for not choosing the Corvair engine. I have made the choice to use a Corvair for many reasons. Probably the reason at the bottom of the list was the cost of the engine. People who are drawn to the Corvair are not drawn by cost, but rather by a thirst for knowledge. For the same reason that you desire to build an airplane with your own hands, the same motivation is what draws people to the Corvair. After having built the engine, you will know that engine as well as anyone, can work on it with confidence, and fly behind it knowing who built that engine. Who rebuilt that Continental? You don't, in all likelihood, know him or her, so you do not know how good a mechanic they are (or how bad, for that matter). Here is my take on your choices. Do your homework. Don't just listen to Glen, or to me. Go to FlyCorvair.com and FlyCorvair.net and read all that you can on the subject of Corvair engines. Contact William Wynne and ask him about Corvair engines. He freely posts his cell phone number on his website. Go to other websites and learn as much as you can on the other engine choices, and then make an informed decision based upon what you feel is best for you. If you do decide to build a Corvair powered Air Camper, I encourage you to go to the Pietvair Forum at http://pietvair.freeforums.net/ and join. It is a website exclusively for builders and flyers of the Pietenpol/Corvair combination. It is a great group of people and I encourage you to use that as a great source of knowledge, assistance, and encouragement. I am the moderator of that forum, an I encourage you to use it as one of your tools as you build. Again, welcome to the Forum, and keep us posted as you move forward. -------- Semper Fi, Terry Hand Athens, GA Read this topic online here: http://forums.matronics.com/viewtopic.php?p=480872#480872 ------------------------------------------------------------------------------------- Other Matronics Email List Services ------------------------------------------------------------------------------------- Post A New Message pietenpol-list@matronics.com UN/SUBSCRIBE http://www.matronics.com/subscription List FAQ http://www.matronics.com/FAQ/Pietenpol-List.htm Web Forum Interface To Lists http://forums.matronics.com Matronics List Wiki http://wiki.matronics.com Full Archive Search Engine http://www.matronics.com/search 7-Day List Browse http://www.matronics.com/browse/pietenpol-list Browse Digests http://www.matronics.com/digest/pietenpol-list Browse Other Lists http://www.matronics.com/browse Live Online Chat! http://www.matronics.com/chat Archive Downloading http://www.matronics.com/archives Photo Share http://www.matronics.com/photoshare Other Email Lists http://www.matronics.com/emaillists Contributions http://www.matronics.com/contribution ------------------------------------------------------------------------------------- These Email List Services are sponsored solely by Matronics and through the generous Contributions of its members.