Today's Message Index:
----------------------
1. 04:20 PM - Continental Rod Bolts A, C, O Series Engines (tkreiner)
Message 1
| INDEX | Back to Main INDEX |
| NEXT | Skip to NEXT Message |
| LIST | Reply to LIST Regarding this Message |
| SENDER | Reply to SENDER Regarding this Message |
|
| Subject: | Continental Rod Bolts A, C, O Series Engines |
If you're rebuilding your A-65 thru IO-240 or 360, and you're going to spend some
$2500+ for new parts, I'll bet you want to build it right.
So, let's do a little math... Engine life of 2000 hrs. x 2100 rpm (avg.) x 60
min. per hour = 252 MILLION stress cycles! Along with Connecting Rods, these
are the most highly stressed parts inside your engine. Also the closest to the
fatigue limit, meaning eventual failure...
My supply of these is running very low, and we'll probably never see this deal
again. AT ACS, these are $19. each, but we're selling them to the Piet and Cub
groups for $12.50 each.
Replacing all 8 for $100. (4 Cylinder engine), these are the least expensive part
of your rebuild. 12 bolts for a 6 cylinder engine will cost $150.00 Specify
whether you want a set of 8 or a set of 12, and I'll adjust cost accordingly.
Contact me via text at 832-326-2970 with questions.
--------
Tom Kreiner
Read this topic online here:
http://forums.matronics.com/viewtopic.php?p=481190#481190
Other Matronics Email List Services
These Email List Services are sponsored solely by Matronics and through the generous Contributions of its members.
-- Please support this service by making your Contribution today! --
|