----------------------------------------------------------
                           Pietenpol-List Digest Archive
                                      ---
                     Total Messages Posted Mon 10/29/18: 1
           ----------------------------------------------------------
 
 
Today's Message Index:
----------------------
 
     1. 09:37 PM - Re: FW: Wing Strut Attachment  (Jim Boyer)
 
 
 
________________________________  Message 1  _____________________________________


Time: 09:37:38 PM PST US
From: Jim Boyer <boyerjrb@comcast.net>
Subject: Re: FW: Pietenpol-List: Wing Strut Attachment

Greg, what is the piece of metal that comes out of the strut and is then al
so bolted to the bolt through the wing lift strut straps? I am not referrin
g to the aluminim 3/4" that the lift strut fork is threaded into. It looks 
like a separate metal strap from your 3/4" piece to the bolt in the spar li
ft straps. Thanks, Jim B.

> On January 5, 2018 at 3:21 PM Greg Cardinal <gcardinal@comcast.net> wrote
:
> 
> 
>      
> 
>     John,
> 
>      
> 
>     A rod end bearing was used when the steel struts were replaced with t
he Carlson aluminum struts on NX18235.  The Aurora HX Series rod-end bearin
g is a good choice because it has a wider ball dimension to fit between the
 spar strap fitting.
> 
>      
> 
>     A drilled and tapped =C2=BE=9D square steel bar was inserted in
 the strut instead of using the Carlson aluminum block.
> 
>      
> 
>     When doing the engineering analysis of your assembly pay attention to
 the edge loading of the bolt holes that are drilled through the struts to 
determine how many bolts to use to secure the strut to the insert.
> 
>      
> 
>     Greg Cardinal
> 
>     Minneapolis
> 
>      
> 
>     From: owner-pietenpol-list-server@matronics.com mailto:owner-pietenpo
l-list-server@matronics.com [mailto:owner-pietenpol-list-server@matronics.c
om] On Behalf Of John C Black
>     Sent: Thursday, January 4, 2018 10:15 AM
>     To: pietenpol-list@matronics.com mailto:pietenpol-list@matronics.com
>     Subject: Pietenpol-List: Wing Strut Attachment
> 
>      
> 
>      
> 
>      
> 
>     Today I am worrying about how to attach the Struts. 
> 
>      
> 
>     What are you guys doing to attach the Struts ?
> 
>      
> 
>     The top Strut fitting is especially challenging.   
> 
>      
> 
>     I am using a Carlson Aircraft extrusion for my struts.  
> 
>      
> 
>     To attach the strut, Carlson sells a 1=9Dx3/4=9D aluminum
 extrusion that slides into the end of the strut.   Then you bolt it in pla
ce.    I cut this extrusion into 8=9D lengths.   I put this 8
=9D piece in the lathe and end drilled and threaded a 7/16 hole 2=9D 
deep into the strut.  
> 
>      
> 
>     On the lower end I plan to use this wing strut adjustment fork from A
ircraft Spruce. https://www.aircraftspruce.com/catalog/appages/strutadjfbse
ts2.php
> 
>      
> 
>     The top end is more challenging.  The wing may move forward or back t
o adjust weight/balance.  This movement changes the angle that the strut me
ets the wing so the attachment needs to be flexible.   I see that 
some builders have used a helm joint.  This is a simple solution, but I won
der about the loads on the fitting.  The strongest Helm joint that I could 
find is rated at 14,000 lbs :
> 
>      
> 
>      
> 
>     That is a little weaker than the strut.
> 
>      
> 
>     What are you guys doing ?
> 
>      
> 
>     John
> 
>      
> 
>      
> 


 

-------------------------------------------------------------------------------------
                       Other Matronics Email List Services
-------------------------------------------------------------------------------------
Post A New Message               pietenpol-list@matronics.com
UN/SUBSCRIBE                     http://www.matronics.com/subscription
List FAQ                         http://www.matronics.com/FAQ/Pietenpol-List.htm
Web Forum Interface To Lists     http://forums.matronics.com
Matronics List Wiki              http://wiki.matronics.com
Full Archive Search Engine       http://www.matronics.com/search
7-Day List Browse                http://www.matronics.com/browse/pietenpol-list
Browse Digests                   http://www.matronics.com/digest/pietenpol-list
Browse Other Lists               http://www.matronics.com/browse
Live Online Chat!                http://www.matronics.com/chat
Archive Downloading              http://www.matronics.com/archives
Photo Share                      http://www.matronics.com/photoshare
Other Email Lists                http://www.matronics.com/emaillists
Contributions                    http://www.matronics.com/contribution
-------------------------------------------------------------------------------------

These Email List Services are sponsored solely by Matronics and through the 
generous Contributions of its members.